The best way to remove the axile adapter on the drive side is to insert the axile on the non drive side and tilt it a little so that it touches the inside of the adapter cap; then just give it a sturdy tap and the cap will come off easily.
Bonjour, je n'arrive pas à enlever la pièce QRM Auto Rear axe adapter, elle tourne indépendament de l'auitre côté de l'axe (difficilement), mais je n'arrive pas à tirer dessus, une idée (et je ne comprend pas bien le commentaire précédent qui parle de cela...)
yeah, I agree with you. the instruction is not sufficient. I guess if we would like to use XDR free body (for SRAM e-TAP AXS ), we are not supposed to use the spacer of end of adapter... that’s why it has been removed... I guess. anyway, the video hasn’t mentioned about it.
Bonjour, il y a du jeu dans ma cassette. J'ai déjà effectué la maintenance montrée dans la video pour supprimer le bruit en lubrifiant les rochers. Est il possible que le jeu soit du a mon mauvais remontage ? Sinon est-ce qu'il faut changer le corps de roue libre? Dans ce cas peut-on changer seulement les roulements?
My inner ratchet is stuck and doesn't come off. Any idea on how to remove it? My problem is that after a super muddy ride everything the grease became dirty and sticky everywhere, and my freehub stopped engaging. Any advice on how to solve this problem? I already bought a ratchet replacement kit, but can't currently replace the inner ratchet.
My hub is stuck (hg/mavic id360 mtb) it comes a few cms and then stops hitting something on the way out. I also removed and dameged a thin washer that came out and I don't see it in the video and don't know where it should go.
Hi. Simply lift the cassette vertically using both hands. Take care not losing parts when all pop out. Go slow and in a clean environment, to avoid losing anything. Enjoy the ride.
@@moundstra1 tried to clean myself which did not work. Took it to the indicated Mavic rep and got charged £42. Have put the cassette on went to tighten then cassette locking nut and the it slipped again. Phoned bike shop. Very defensive and indicated Mavic are slow in getting parts out to them. Bike shop encouraged me to write into Mavic to add weight to argument that this hub design is not fit for purpose.
I'm having the same problem. What seems to be working is that I'm not tightening the cassette locking nut as much. I'm thinking that over-tightening the cassette nut compresses the free hub body to a point it slightly buckles, in turn creating enough radial deformation that keeps the ratchet from engaging. It's the only thing that's managed to get it to work again.
Have the same Problem. Andy ideas @mavic? Could you please Help? Disassembling and assembling was at easy as IT gets. But have now very high Resistance. Is the spring eventually too weak after some years of use? Do you have a service where u i can send the wheel to? Normal Bike Shops don't get IT over here. Would be great. Love my cosmic carbone pro sl...
In my garage I already have some "Special Grease" for DT Swiss hubs with ratchet system (the red one, from DT Swiss) , can I use it or should I buy the Mavic one?
Hi. Sorry, we've not tested the competitor's grease. Our user guide mention to only use Mavic special grease to preserve the mechanism. We've developed and tested it for hours and hours so we're sure it perfectly performs in our freewheel system. Its ingredients are especially developed to ensure a smooth functionning. Not worth trying non validated grease, does-it?
@@mavic thank for your answer, I finally bought Mavic grease but after 3000 km of usage I had to apply it again because the old one was dark brown, is it normal? What is the correct maintenance interval for regreasing the rtachet system?
Hi. The 1st end caps were not tight enough. Now we also consider the cassette weight to have a tighter hold from the end caps so it's not happening anymore. Go slow when doing and it will be fine. No worries, it's not a defect. Enjoy the ride.
So if i dont reassemble the "noise reducing pad", the Hub Sound is louder?,...or whats that rubber for? I wonder if a DT Swiss 54 Ratchet Upgrade Kit would fit in this Mavic Hub...someone tried already?
Hi. As its name says: it's function is to reduce noise by absorbing vibration and resonance by its soft compound. If you prefer louder mechanism, take it off, if not, leave it in place, as simply as that. No effect on the mechanism itself so no worries on or off. Txs. Enjoy the ride.
Hi. Minimum once a year bur more often if the riding conditions are particularly bad (dirt, salty water, or worse). Lubrication is key for a smooth working mechanism like any mechanical system (gear box, moving metallic parts...). Enjoy the ride.
Next time I will buy Syntace, Hope or DT. I dont want to ride a ratchet freewheel that sounds like a Shimano XT. Changing Grease to Syntace Oil didn‘t make it much louder.
The best way to remove the axile adapter on the drive side is to insert the axile on the non drive side and tilt it a little so that it touches the inside of the adapter cap; then just give it a sturdy tap and the cap will come off easily.
Thanks man
Thanks for video! What is the recommended maintenance interval?
Bonjour, je n'arrive pas à enlever la pièce QRM Auto Rear axe adapter, elle tourne indépendament de l'auitre côté de l'axe (difficilement), mais je n'arrive pas à tirer dessus, une idée (et je ne comprend pas bien le commentaire précédent qui parle de cela...)
最後に嵌める黒いパーツ、なんか部品が分離してどっか行っちゃってるんですがどういうことですか？？？
I think the video is rather vague! If this is service instructions, why some parts are removed from the original freehub?
Just pull it apart. Grease it. Reassemble in the opposite order. Not hard at all.
yeah, I agree with you. the instruction is not sufficient. I guess if we would like to use XDR free body (for SRAM e-TAP AXS ), we are not supposed to use the spacer of end of adapter... that’s why it has been removed... I guess. anyway, the video hasn’t mentioned about it.
Bonjour, il y a du jeu dans ma cassette. J'ai déjà effectué la maintenance montrée dans la video pour supprimer le bruit en lubrifiant les rochers. Est il possible que le jeu soit du a mon mauvais remontage ? Sinon est-ce qu'il faut changer le corps de roue libre? Dans ce cas peut-on changer seulement les roulements?
My inner ratchet is stuck and doesn't come off. Any idea on how to remove it? My problem is that after a super muddy ride everything the grease became dirty and sticky everywhere, and my freehub stopped engaging. Any advice on how to solve this problem? I already bought a ratchet replacement kit, but can't currently replace the inner ratchet.
Sorry to hear that. Would you please contact the tech department in the following list www.mavic.com/en-int/contact-form?
My hub is stuck (hg/mavic id360 mtb) it comes a few cms and then stops hitting something on the way out. I also removed and dameged a thin washer that came out and I don't see it in the video and don't know where it should go.
How can you pull of the drive side adaptor?
You do literally just pull it
Hi. Simply lift the cassette vertically using both hands. Take care not losing parts when all pop out. Go slow and in a clean environment, to avoid losing anything. Enjoy the ride.
@@mavic How can i lift it, when it comes stock out of the box with no cassette attached to change it to the correct an needed freehub?
@@DerEndgegner If you can't pull it off by hand, just use some pliers. Use some cloth as to not damage the cap.
Does the road wheels comes with 40T ratchet stock? (Specifically Mavic Ksyrium SL Carbon rim brake)
Yes, double ratchet of 40 teeth. Txs
Totally lost all drive on my mavic free hub. Took free hub off cleaned and re-greased but the hub will not engauge. Keeps slipping. Any advise?
same problem, doesnt engage anymore randomly. buy something thats not mavic next time lol
Same problem here, it slips after 4000km, cleaning does not help...
@@moundstra1 tried to clean myself which did not work. Took it to the indicated Mavic rep and got charged £42. Have put the cassette on went to tighten then cassette locking nut and the it slipped again. Phoned bike shop. Very defensive and indicated Mavic are slow in getting parts out to them. Bike shop encouraged me to write into Mavic to add weight to argument that this hub design is not fit for purpose.
I'm having the same problem. What seems to be working is that I'm not tightening the cassette locking nut as much. I'm thinking that over-tightening the cassette nut compresses the free hub body to a point it slightly buckles, in turn creating enough radial deformation that keeps the ratchet from engaging. It's the only thing that's managed to get it to work again.
Have the same Problem. Andy ideas @mavic? Could you please Help? Disassembling and assembling was at easy as IT gets. But have now very high Resistance. Is the spring eventually too weak after some years of use?
Do you have a service where u
i can send the wheel to? Normal Bike Shops don't get IT over here. Would be great. Love my cosmic carbone pro sl...
is the ID360 freehub shimano 10-11V compatible with Sram 11V ? (PG1130) thanks
As it's not an XD specific, then it must be compatible with an HG imprint.
In my garage I already have some "Special Grease" for DT Swiss hubs with ratchet system (the red one, from DT Swiss) , can I use it or should I buy the Mavic one?
Hi. Sorry, we've not tested the competitor's grease. Our user guide mention to only use Mavic special grease to preserve the mechanism. We've developed and tested it for hours and hours so we're sure it perfectly performs in our freewheel system. Its ingredients are especially developed to ensure a smooth functionning. Not worth trying non validated grease, does-it?
@@mavic thank for your answer, I finally bought Mavic grease but after 3000 km of usage I had to apply it again because the old one was dark brown, is it normal? What is the correct maintenance interval for regreasing the rtachet system?
@@4lumi Details are on the user guide: sylius.mavic.com/media/file/tools/Wheels_User-Guide_6237454X%20jan2021.pdf
Hi!!! I want to updrade my wheels to ratchet 40t. Where I can buy it? I have a Crossmax Sl Ultimate.... Thanks...
Hi. Txs for your question: please contact our Customer Support listed here: www.mavic.com/en-int/contact-form
When I was changing wheel parts just fall apart like on the video with no tools being used. Is it normal ?!!
Hi. The 1st end caps were not tight enough. Now we also consider the cassette weight to have a tighter hold from the end caps so it's not happening anymore. Go slow when doing and it will be fine. No worries, it's not a defect. Enjoy the ride.
Thanks
How do I solve the sqeal of death?
So if i dont reassemble the "noise reducing pad", the Hub Sound is louder?,...or whats that rubber for?
I wonder if a DT Swiss 54 Ratchet Upgrade Kit would fit in this Mavic Hub...someone tried already?
Probably partly that probably partly to keep water and dirt out..
@@streaky81 Well If so,why they call it "noise Reducing Pad" ?
Hi. As its name says: it's function is to reduce noise by absorbing vibration and resonance by its soft compound. If you prefer louder mechanism, take it off, if not, leave it in place, as simply as that. No effect on the mechanism itself so no worries on or off. Txs. Enjoy the ride.
how often do I have to lubricate freehub?
Hi. Minimum once a year bur more often if the riding conditions are particularly bad (dirt, salty water, or worse). Lubrication is key for a smooth working mechanism like any mechanical system (gear box, moving metallic parts...). Enjoy the ride.
Next time I will buy Syntace, Hope or DT. I dont want to ride a ratchet freewheel that sounds like a Shimano XT.
Changing Grease to Syntace Oil didn‘t make it much louder.
Loud freehub is great for riding in the city. Pedestrians hear you coming.
@@korsveien Not our pedestrians. I have yet to find one who hears me coming. Only shouting works.
It's already loud, too loud for my liking. I rode next to someone with a Chris King. Now that was downright obnoxious.
have XT hubs in mountain bike and ID360 in road bike has TERRIBLY different sound, search for video
So dumb. Just have a real mechanic do it. My customers hub isn't free floating in space with parts magically coming apart. Grr. Crap
Lol
Hi. This 3D animation is created to show the different parts and how it works, sorry you don't like it.