I BOUGHT THE BIGGEST EXHAUST TIP I COULD FIND FOR MY CUMMINS!!!!
Вставка
- Опубліковано 7 вер 2024
- I BOUGHT THE BIGGEST EXHAUST TIP I COULD FIND FOR MY CUMMINS!!!!
Stack Exhaust Tip: amzn.to/2IenP2d
LIKE & SUBSCRIBE!
LOUD 'N' PROUD MERCH!: www.spreesy.co...
Topside Creeper: amzn.to/2CWo527
Hood Mounted Work Light: amzn.to/2oL3FF5
Need Diesel performance parts? Go to Diesel Auto Power! Your one stop shop for your diesel parts needs! Don't see what you need on the website? Give them a call!
Tell them I sent you!
DIESEL AUTO POWER! - goo.gl/8gZGZh
Looking For High quality and stylish wheels for your ride at a great value!?
Tell them I sent you!
ANTHEM WHEELS! - bit.ly/2v0zZcQ
Need HIGH QUALITY Air Flow Performance parts for your diesel!?
Tell them I sent you!
PUSHER INTAKES! - bit.ly/pusherin...
----------------------------
Send stuff here:
LOUD 'N' PROUD
520 Broadway St P.O. BOX 272
New Haven, IN 46774
U.S.A.
------------------------------------------
My Outdoors Channel: / mrthehunterslife
---------------------------------------------
Links to the parts we use are all listed below!
----------------------------------------------
INSTAGRAM: / bow_hunt_or_die_
SNAPCHAT: BH-OUTDOORS
---------------------------------
Black 1997 12 valve Mod List!
Fuel Maverick Wheels: amzn.to/2oHezvI
33X12.50R20 Patriot MT's: amzn.to/2EBx9dF
2.5 inch Leveling kit: amzn.to/2Jy7PZX
Bilstein 5100 Series Set of Shocks: amzn.to/2qjr0Oa
42" Curved AUXBEAM Light Bar: amzn.to/2HPhPgZ
6" Light Bars: amzn.to/2qIdUKw
-----------------------------
*Nasty Red Build List!*
Compound Turbo Kit: www.pusherintak...
Mega Twin Intake: www.pusherintak...
4" MBRP Exhaust: amzn.to/2Fb45yO
4X8 Exhaust tip: bit.ly/4x8tip
Rear Differential Cover: amzn.to/2CYBw1B
Pro-Comp Xtreme MT2 Tires: amzn.to/2oEalVG
Anthem Gunner Wheels: bit.ly/AnthemWh...
Tow Mirrors: amzn.to/2Fekq1M
LED Headlight Bulbs: amzn.to/2FeDahv
Bilstein Shock Absorbers Set of 4: amzn.to/2FTYvOE
Leveling Kit: amzn.to/2CZ80sG
Mictuning 7.5" Light Bars: amzn.to/2CY4JK5
Valve Springs: bit.ly/valvespr...
Valve springs Compressor: bit.ly/Valvespr...
HeadStuds: bit.ly/12vheads...
Pushrods: bit.ly/pushrods
Rocker Pedestals: bit.ly/RockerPe...
120HP DAP Injectors: bit.ly/injectors
Boost Elbow: bit.ly/Boostelbow
----------------------------------------------
*1996 12 Valve Dually Build list!*
(videos on ALL Mods!)
5 inch Exhaust: amzn.to/2iKQqkt
8 inch Exhaust Tip: amzn.to/2AHDCU4
AFE COLD AIR INTAKE: amzn.to/2yLmnPc
Mega Intake: bit.ly/MegaIntake
Aftermarket Valve Covers: amzn.to/2CFnKkG
MicTuning 32" Light Bar: amzn.to/2CTYg35
Wiring harness: amzn.to/2DrvYhG
4th Gen Tow Mirrors: amzn.to/2FmPY5Q
GlowShift Gauges: amzn.to/2FbMKpD
---------------------------------------------
*2002 F350 Powerstroke Build list!*
Grille: amzn.to/2pPuJ4B
Taillights: amzn.to/2rofhh4
Headlights: amzn.to/2xkiIvy
Fog Lights: amzn.to/2pU3jdJ
Cab Lights: amzn.to/2qe2cWq
Third Brake Light: amzn.to/2rehOxp
Tow Mirrors: amzn.to/2gLDnO3
4" Muffler Delete Pipe: amzn.to/2y85sHh
4" Muffler Clamps: amzn.to/2f7Z7Ht
more coming soon!)
-------------------------------------------
*1992 First Gen 12 Valve Build list!*
(Not all things can be listed... but more coming soon)
Exhaust Tip!: amzn.to/2qsfNxc
Bed Liner kit: amzn.to/2qimSz3
Bed liner spray cans: amzn.to/2r7kMU4
Grille: amzn.to/2qhoKZv
Taillights: amzn.to/2qkt8Vx
Grill Insert: amzn.to/2pLUXVI
50 HP Injector upgrade
Gauges Pillar: amzn.to/2rhjstK
Gauges: amzn.to/2t6qJOb
Pusher Intake Systems: amzn.to/2rhq779
-----------------------------------------
*2013 Super-Duty KingRanch build list!*
5" DPF Back Exhaust: amzn.to/2CZuTMt
Nitto 35X12.50 Tires: amzn.to/2FTYaes
(UPGRADES COMING SOON)
-----------------------------------------
My Camera Gear
Canon D-SLR: amzn.to/2rJZHN3
Canon Mic: amzn.to/2ruS8fX
GoPro: amzn.to/2qxFLPD
GoPro Accessories: amzn.to/2qFN1WI
Canon: amzn.to/2q4RBky
(For Editing)
MacBook Pro: amzn.to/2qxhAkc
--------------------------------------------------------
LINKS ABOVE ARE AMAZON ASSOCIATE LINKS
--------------------------------------------------------------
Keywords:
cummins
12 valve cummins
24 valve cummins
2nd gen cummins
1st gen cummins
first gen cummins
dodge cummins
cummins
ram
lifted cummins
3rd gen cummins
turbo scream
straight pipe cummins
big turbo
turbo spool
rolling coal
4th gen cummins
12v cummins
24v cummins
powerstroke
duramax
diesel
injectors
cummins injectors
🔴The 12 VALVE GIVEAWAY IS LIVE!!!
🔥🔥🔥🔥🔥🔥🔥
*June 1st - July 2nd!!*
Every $20 you spend on the merch store gets you an automatic Entry!!!
WEBSITE LINK: team-lnp.myshopify.com
Or- Team-LNP.myshopify.com
You could be taking Home a new truck!!!
the reason why exhaust dropped down is because you have it welded solid and have no rubber grommets like the stock system had so there for when you crank it and rev the twist of the motor or torsion it also twist and but stress on your exhaust pipe
colby root I just forgot to put a clamp on a section of my exhaust system... but I fixed that...
I love your truck man
Add more weld to the top of ur tip and it should pull the metal together bringing it back up
Nice man.
Sick
Ordered my rims and tires from summit raceing at about noon they delivered them mounted and balanced the next morning at 10 I lived about 200 miles from them at that time 4 rims 4 tires $801
😅that weld had me crying before he even showed it to us
Wonder if that hanger ever broke bet it did
Get a mig welder better for muffler welding i mean my preference
Trying investing in a mig for welding exhaust
it doesn’t look good but it sounds good. shoulda but the stack on the dully
I would re-weld that tip and piping if I were you. Not trying to knock you or anything but its hard to weld that thin material with a stick welder, not that it cant be don't, its just harder. Take it to a shop and have someone TIG weld that and it would be gorgeous. Especially since its a giveaway truck.
Is that a stainless tip? If so that could explain the bad welds. Other than that I would’ve took the coating around the edge of the tip
Man it looks like a bird took a crap on those welds. Who did that?!🤣
I want it
so you have no flex in the pipe to allow it to free move? i would take that top weld out and use a rubber hanger
Honestly I love it
Don't weld lines... Just do small spot welds all way around
Bad ass
What an awesome sound..love cummins
Do a gasser build
Looks good now go take a flap disk and sand down those welds
For sure best sounding diesel you have
How do you enter the giveaway
Do those compensators really work?
That's nice what size tip is it 8" or 10". I had kinda the same set up 5" straight pipe to 10" tip sounded great.
zac klug 8”
Did you get your tires yet
What did u do for a lift to fit 20x12
Are all his trucks 12v
What’s the part number on that tip
Reminds me that one of my fathers dump trucks we put a 8 inch stack for the exhaust duramax
where could i buy this
I really need a truck like that because my first truck was the exact truck
Hi how are u guys doing
I want a diesel so bad
That is the most crazy exhaust I’ve ever seen. Dope
Sounds so good I can only imagine in person buddy. Can't wait to see them tires fitted
Love the exhaust tip
I love the diesel power
I live in Indiana and very rarely do I see second gens that clean. I've had 3 and all the fenders had rust and 2 the rockers were going. Glad to see theres nice ones out here
I’m not trying to be negative. But if you stick weld. You need to knock the slag off of your welds.
Please tell me you disconnected the battery
I worked for FedEx for a very short amount of time and I can say they don't care about your package at all
I have 4 inch straight pipe but it has like 3 holes on the pipe if I cover them will it make my truck louder ?
Truck sounds good u should get wheels for the dually
That truck sounds A MA ZING good job 👍
Where is the 1st gen
Fire that welder
How do I participate
If i was to get the give away id take the black dodge or the 7.3
Cameron Barnes you’d want the 7.3 if you win? 🤔
That truck sounds amazing keep up the good work
Great job, sounds great!
If you don’t mine me asking what the level on your truck
stacks are life
Looks great, sounds awesome, great work
Wow that truck looks just like my 97 I just bought wish I could figure how to post a pic
I work at UPS and at work we are pressured to load quick and move fast. Boxes do get holes in them and destroyed. I appologe about that.
What size is the pipe? Im running 4x5 and wanna go 4x10, but don't know if it'll make my truck louder
Sounds great keep up the good work
Is this a 6.7 Cummins ?
That sounds amazing! quick idea, you should put clearance lights on the cab I think they make trucks look so much more mean!
I just put a 8”x36” stack tip on my 7.3 lol. Had to put another hanger on bc I didn’t feel like having my exhaust cracking.
I sure miss this truck
them welds are mint
Raging Squirel lol
How much HP did this add ?
Holy shit that weld made me comment. Practice on some pipes man
Do a side my side comparison of the dually and the black truck to see which is louder
That exaust is crazy but it sounds great.
frickin awesome. love this truck.
Bad ass!!
I’ve always wanted to do this to a diesel, I’ve never liked stacks in the bed but hanging them out the back is awesome.
Truck sounds good.
Looks dope
tip looks good!
Simpletire was ligit for me.. Ebay is ligit..
I love it good job
About 2-3" up on the back of the 8" stack. Just run small flat piece of sheet metal around it and run up to the frame. Or somewhere so it wojt let it bounce around.
Preston Hepler ok I gotcha! Thanks bro
Is 12v better then 24v?
You need bigger tires.
Lot more black smoke
Sounds great buddy I just got done ordering a 10 inch tip for my 5.9 2001 24 valve I figured I needed a upgrade I just got a 5 inch tip on it now but anyways great videos brother keep up the awesome content
Does ur truck Happen to be straight piped?
Yes straight piped
James Barron damn! Well i have a cummins same yr as urs 24v and its axle dumped with a 8in tip and straight piped and its loud af, i can't imagine a 10in tip lol XD anyways hope its sounds good👍
Love the sound!! I'm gonna do the same thing on my 24 valve 😍 keep up the good work!🤘
Would you ever do a 24v build with a p pump conversion?
As delivery driver for one of those companies I can’t speak for all of us but we do try to take care of each package a lot of times it comes to us that way
yo that looks awesome
yea... pretty sure that thing is low enough to get curb checked good luck with that.
Do it go for a stack in the bed of the dually
The reason the pipe keeps moving is you need to add a section of flex pipe but it sounds good
What? No dual exhaust??
Working on getting my first truck this June. I want to start a scrap hauling business and sell junk cars. I'm hoping to get a 97 Dodge Ram 1500 4X4 to start with. If it takes off I'll go for a Cummins.
I don’t think it’d hurt anything with stacking the dually since it’s a longbed but it’s your choice🤷🏻♂️
22x14 hostile alphas would look so good on this truck
Jakeeboy 10 I agree...
Did you diconect the battery before you did that weld
How long did those shitty welds on the hangers last? 3 days?
Put a stack on the dually pleaseeeeee
I bought a 5 in mbrp and had to send it back twice cuz it was jacked up from ups twice
Looks and sounds really good. U might want to get to a muffler shop a d get it welded properly,those welds wont hold up with all the heat.
Gotta get it tinted with 5% and 20% shield. Would look soooo good
Holy shit that weldings bad. Sorry but damn. ( I am a welder in the UK Btw!)
When somebody says that something will be there in 7 days, that mean 7... not 70!!!
dude they make exhaust clamps for a reason I've even used nut and bolt to hold a tip on it needs a little play