Cummins gets 4in straight pipe and cold air intake!!

[@vernonhartzell2467]

Love it! I have an 06 Mega Cab. Just put side dump in front of the back tire. Ive always loved the look of side exhaust since the muscle car days! Strait pipe is the only way for a cummins!

[@Mrcrazyracerguy1]

I have the same truck, right now has a Flo Pro 4" cat back, wanting to delete the cat, hows the drone straight piped?

[@quentonmillstid850]

You guys say Mega cab like it matters?
Is that supposed to be a brag?
What you sleeping back there?
Otherwise what's the point?
You can throw more crap behind the seat? The truck just becomes less fuel efficient, more weight wares down parts faster,

[@Logaweed]

@@quentonmillstid850longer wheel base also drives and pulls nicer. One extra benefit to a mega cab other than just the cab.

[@jeffreyyeater1780]

I have exactly the same truck. 06 8ft. Bed. 4 door . straight piped . had it 07 . sounds good man !

[@anthonymarron2055]

Potentially by removing the cat which collected some of the exhaust soot etc. when you weren't hammering it didn't leave that build up to be blown out of the tailpipe any more. I added a section of pipe where my cat was and where my muffler was and made my own 4" with stock down pipe and it rolls just as much as you can stock but less after the fact like you noticed.

[@straightpipediesel]

I like how the inside of the tip was all nice and clean at 10:09 and all black at 10:25. That's how you know you got a dirty diesel!

[@solomonjames9182]

That’s how I like them! Lol

[@straightpipediesel]

@@solomonjames9182 Me too. Keep it nasty!

[@gtafifakid]

nice set up man on the fly bys i immediately recognized the buttes lol 530 shoutout!

[@solomonjames9182]

Hell yea!

[@alexbalderas9239]

Every diesel owner gotta go with the stupidest exhaust tips. Lol never fails

[@solomonjames9182]

Are you hating because your exhaust video only has 30 views?🤔

[@zachpeninger5214]

The neighbors are going to love hearing that all the time lol

[@mikea1266]

This is happening for my 12 valve after KDP fix and starter solenoid rebuild.

[@alanosborne1947]

You spent all that money on a cold air intake but your sucking in HOT air from the engine compartment. You only want air coming in from the outside not a mixture of outside / hot engine air.

[@samuelhorner6200]

11:00 for cold start

[@DoC_]

startup @ 10:47

[@sethkory162]

it doesn’t roll coal cuz the new intake which added more air, which means it’s running more lean but not by much

[@solomonjames9182]

Yup, once we threw on the Smarty Programmer she dumps!!

[@bluntman99999]

Straight piped, an mine is programmed also. Rolls no coal, only reason you would be rolling coal is if your not burning fuel correctly, end of story.

[@WiiGaMiNg-gt1ul]

I have a cold air intake and the same exhaust setup on my 02 Cummins and it still rolls coal

[@jamesgrant1713]

Sucking in hot air might make it sound a little better but no power,

[@200130769]

@@bluntman99999 wrong. If it runs rich it will roll coal too.

[@RWCLOCO]

That’s funny I’m from nor cal to and thinking of doing the same for smogg 😏

[@Frindleeguy]

Wouldn't it be easier to just move out of that state?

[@MyCoolboy17]

Lol I personally feel like you should have gone with a better quality exhaust, I bought a flo pro 5 inch turbo back for my 2010 6.7 and it didn’t require any cutting to fit, it came with an extender pipe you put in if you’re putting it on a long bed. I feel like that’s a much better setup then having to cut it to fit for a short bed

[@solomonjames9182]

I haven’t heard of that brand I’ll have to look into it thanks!

[@Yasin5791-d7u]

The thing with old diesel trucks is that you can daily drive them. Modern Diesel engines should never be daily unless you use it for work.

[@solomonjames9182]

Not when you got fuck you moneyyyyyyy

[@michaeljohnson9079]

I thought 4 inch was stock on these.i have a 07 5.9l and I swear wene I went out and measured it was 4 inchs

[@toddhefer6084]

The rolling coal is odd lol mine rolls a lot more coal with just a muffler delete lol ..

[@loud_at-4168]

Mine doesn’t roll any,

[@axesv1155]

@@loud_at-4168 same here , no coal

[@miguelherera714]

Not getting enough smoke as stock sie to you back pressure dropping g on straight pipe hook up some custom tunes and you'll dump all day

[@genestarwind4610]

Massive tips like that don't really look good IMO. 5" is a good size 6" is pushing depending on tire and bumper.
Asking it to get bashing on offroading.

[@That.clapped24v_]

Buy a FASS 165 with 150hp inejctors if you want it to dump. At that point though, better have a good tune and be looking into getting studs.

[@solomonjames9182]

Yea studs are next!

[@masonmullins4533]

I love your truck

[@solomonjames9182]

I appreciate it man!!!! Thanks

[@_astralxinfluenced_2799]

What are your wheel specs mang? 🤔

[@B1ackwell17]

Crazy.... I’m in Nashville, Tennessee and emissions just hooks up code reader. Nothing else when my emissions rolls around. 05’ 2500. Sounds good tho. How do you like the cold air intake? Any noticeable difference?

[@solomonjames9182]

You can definitely hear that stock turbo now after that cold air intake. Also removed the silencer ring.

[@calebcarroll1572]

I got a 06 2500, is there really a noticeable difference with the cold air intake and the silencer ring taken off for the turbo? I could definitely hear it in those shots where you rolled by the camera and what not. Can you hear it in the cab at all?

[@solomonjames9182]

The Silencer ring not really, but with the cold air intake you can definitely hear the difference. Also you can hear it in the cab.

[@calebcarroll1572]

@@solomonjames9182 thanks man thinking about doing this to my truck.

[@200130769]

Dont waste your time and money on a cold air intake. Most of them still pull hot air from the engine bay. The stock one is great if you remove the baffle and cut holes in the bottom of the front of the air box below the filter. Then you'll be pulling direct outside air from the grill.

[@zanehamilton8076]

Yassssss

[@jordanmaurer5059]

All rolling coal is unburnt fuel. Your engine is burning clean and efficient.

[@gregritter377]

what year is this and is it 6.7 or 5.9

[@solomonjames9182]

2004.5 5.9

[@200130769]

Cold air intake is about the biggest waste of money there is. If you take out the baffle, turbo silencer ring, and cut holes in the bottom front of the box it will pull direct cold air right from your grill. That about as good as it gets. The air has no chance to warm up before going into the Intake.

[@trevorhelmsley388]

Not everyone wants to be a redneck like you

[@douglashundley6777]

Loud as heak

[@thereal_2148]

Go with a low boost fueling tune and the Cummins will roll lots of coal, your smarty tuner will be no use with out the dirty tunes just an FYI but good luck brotha Cummins sounds nice 🤙🏻

[@solomonjames9182]

Sounds good thanks! I got a Smarty Tuner Vid coming up soon as well!

[@brandonmick9191]

As a 2007 5.9 owner how about yall dont roll coal and stop fucking it up for everyone else....Straight pipe it all you want but tune your truck correctly. Black smoke doesnt equal more power.

[@KDlGG]

@@brandonmick9191 they bought the truck, their options to do as they like, potentially does mean more power depending on your turbo size btw

[@brandonmick9191]

@@KDlGG potentially black smoke does mean more power for the 1% of people who actually modify it correctly.. the other 99% of diesels on the road that are “Tuned” are just running a hot tune with extra fuel to roll coal on stock everythinng. Do all you want i guess…. but thats why the EPA has a lawsuit on ez link right now and if its anything like the lawsuit H&S Performance had on them from the EPA They will likly get shut down as well. Going to get even harder to tune newer diesels with dumbass people screwing it up.

[@200130769]

Rolling coal isnt a good thing. Wasted power

[@motorfntrash4254]

How much hp it has

[@solomonjames9182]

Not sure honestly

[@justinjheijnen]

Is it the 235 hp one or the 325?

[@solomonjames9182]

325

[@michaeljohnson9079]

@@solomonjames9182 how do I no exactly what I have 07 ram 3500 mega cab 5.9l 24valve

[@solomonjames9182]

@@michaeljohnson9079 you have the 325 one. Any year before 2004.5 is the lower hp one

[@michaeljohnson9079]

@@solomonjames9182 ok thank you

[@braylonmurray557]

You need to program it and it will role coal

[@200130769]

Rolling coal is retarded and not a good thing. Wasted power because its unburnt fuel

[@pafishing4892]

What was the part number for the exhaust

[@solomonjames9182]

K4235A-RP

[@pafishing4892]

@@solomonjames9182 is your truck a 2004 or 2004.5?

[@solomonjames9182]

@@pafishing4892 2004.5

[@pafishing4892]

@@solomonjames9182 thanks

[@pafishing4892]

Do you know if a 2004 5" mbrp would work on a 2004.5?

[@alphataurusii]

don't you worry that the forests will die if you drive without a catalytic converter?☠🌲☠😋👍

[@travisharper1306]

Lmao having to smuggle and exhaust system into California that’s ass 😂

[@half-assedandnotfast3375]

I'll buy that stock exhaust the straight pipe is annoying af

[@toddhefer6084]

God Bless in Jesus Christ Name Amen.

[@toddhefer6084]

I’m in NorCal what part you from ?

[@solomonjames9182]

About 45 minutes north of Sacramento