The stuff starting from notes mapping is quite confusing. Reaper 6.26 shows C3 for 48 note (which we chose for Kick) but sequencer maps this note to C2. Later when we are switching patterns with midi-keys, it's also 1 octave higher than selected in sequencer. Otherwise really nice tutorial.
This fixed why I couldn’t hear a kick! I made both the sequencer and the kick C1 and could not figure out why it wasn’t making a sound! When I changed the sequencer to C0 it made a sound finally! Thank you! 🎉
anyone knows why i get C3 instead of C2 when i type 48 to choose the midi note that trigger the sample? then the C3 is not the kick on the sequencer, i get it on C2 like here even though it is C3 when i choose the note in the fx settings
As others found, note C2 was C3 etc etc regardless of what it says I found the sound by laying notes in the sequencer and sweeping the green keyboard bit until i heard them, they were all grouped around C1 D2 etc regardless of them actually being C2 or 3. Hope this helps. A little confusing. Otherwise another good vid KG, thanks.
Note starts are about 12 below what yours are: for example C 3 = 48. So when I select a note in the midi sequencer it corresponds to a different sound, for example C3 = shot 1 instead of snare.
I did mine in reaper V6 and was able to match 8 bars pretty well. My kick was mapped originally to C3 in the sampler as others have suggested here. The way I resolved it was to just ignore it in the sequencer and put the kick at C2 like in the video. It's an interesting way to make drum beat- I have a million drum samples, just not a million years to do it in.
So I've ran everything as correctly as possible, and have no trouble with making patterns or anything like that, but whenever I pace notes on the track it only plays a single pattern from the MegaBaby and doesn't change even though I have it set to pattern change. Can someone DM me what the problem is and how I can fix it? I've been trying to figure this out for weeks now.
How is this better than double clicking a standard MIDI track and working in the default MIDI editor? Is this just a legacy alternative method of laying down drums?
how can i reset the starting point of the sequencer within the song? i usually have my project starting at bar 2, not the 1st bar and i have short breaks and stuff in between the patterns
I had a problem with the samples "echoing". I would add the first sample and things would work fine then copy-paste add the 2nd, 3rd etc and all of the copied samples would have a very strange sound, not the sample sound. I found that my up to date version of reaper changes the "mode" setting from "Sample (ignores MIDI note)" to "Note (simitone shifted) by default. if you have weird other worldly sounds coming out of your sample like you are summoning demons from the deep make sure mode is to Sample (ignores MIDI note).
Hi! Somebody knows how i can add some FX using the Megababy like for exemple a reverb just on my Clap and not on the rest of the pattern? Thanks a lot !
Great tutorial, thanks Kenny. I watched both this and your other "first drum beat" video. I must admit I don't quite see why one would use the sequencer, given it's possible to do everything just by creating MIDI notes in a MIDI item - either playing them on a HW keyboard, or just painting them in. And it seems like the UI for the MIDI item is a bit nicer to work in than the sequencer one; and you have to use a MIDI item to trigger the sequencer anyway. But of course it's always good to know about all the options available, and probably more advanced sequencers than Megababy have other advantages vs just using MIDI items.
I don't know what the hell I'm doing wrong. I've done this tutorial more than once before and for some reason this time it's just not working for me I've even gone through and completely restarted the tutorial. I'm 4 days deep into this track I'm working on so I'm not starting the track over. For some reason the track with the sequence drums on it will play pattern 0 no matter what even if there's no midi event on that track. If the effect is on it will play pattern 0 no matter what. Unless I open the effects window and manually switch it to beat one and in that case it'll just play that forever and ever and there's not even anything on the track. I had to use mute envelopes to get it to be quiet until I wanted it too but then when I wanted to switch patterns it just doesn't do it it just stays on pattern 0 forever. The only way I could get it to switch to a different pattern would be to create an all-new track copy and paste my sequence to beat and then use a mute envelope to mute the first sequence and unmute the second sequence at the right time which is a totally unacceptable work around. Does anyone know what the hell is going wrong
@@justinmcfeeters951 have you tried assigning the different patterns to different notes and then drawing the notes on a midi section of the recording time-line? If so... Hmm.... Lmk
hey there,i try this at reaper 6.05 and have no sound!it seems that it sends the signal of each drum but i can not listen.(i don't use any midi keyboard).any idea?
Great tutorial as always! I'm having trouble subdividing the note at 13:00. I'm on a mac but the key combo you mentioned doesn't work for me. Is there another way to do it?
This video is GOLD!!! I wanted to turn WAV files into midi. I can make a bunch of WAV files from my drum machine, or use some samples from a disc I bought on Ebay years ago with 29,000 drum samples. This is going to be different than anything I've ever done. I always program my drum machine with the exact speed I want & make a wav, then transport it to reaper. Now I can use wav samples & turn them into midi in reaper.
What the fuck is this speech pattern, and who told your generation its okay? I'm dead. "So when you use reaPER......You want the setTINGS.......... to look like this."
same here it wont load the files he used in the video. for hardware I just got a GTX 1660 super GPU, a Ryzen 7 3800X CPU, Corsair DDR4 3600 MHz RAM, MSI X470 Gaming Plus Max Motherboard, and a western blue M.2 ssd. In fact I just thought of something and it fixed my issue, if you also have an SSD than make sure to put the samples into a folder under the "REAPER (x64)" Folder. My theory was that because they're saved on two different drives there was some sort of conflict. I don't know if that's true or if it will fix your pc cause I am not that knowledgeable on computers, but if it does than let me know
For some reason my patterns won’t change when I draw in the midi item and copy and paste. Instead of changing to the next one it stays playing the same pattern, continues playing while ignoring the midi items I pasted. The only way I can get the patterns to change is by linking them with the alt button/first method. Anyone know what’s up?
Same with me.. though it initially worked, now whatever I do I don't have any sounds in the megababy. Don't know what's wrong, nothing is muted.. Have you managed to sort it out? :)
This is good instruction but when it gets to when you "draw" the pattern at the end, it just doesn't work, very confusing and I'm really considering not working with reaper because it's so confusing for a beginner.
This might seem ridiculous but for whatever reason I follow exactly in getting the samples in but the sequencer doesn't actually play them, they play on the piano notes but not the sequencer
I'm leaving a solution i couldn't find in the other comments. Using the sequencer, even after you set up the last trigger it will keep playing the sequence indefinitely. A solution i found to stop the sequence is to set up an empty pattern. Say pattern 15 which can be triggered by D#5 i believe. Leave that pattern empty and then trigger it via that midi trigger like D#5. if you only have 2 drum patterns like pattern 0 & 1, then you can leave pattern 2 empty and trigger it with D4. If you don't want drums until a certain point in the song, make sure your first measure of the song has that empty pattern trigger and then change the trigger to a filled in pattern where you want the sequencer to start.
I was following step by step, almost everything went all right but C4 (etc) did not change the sequence pattern, all bars ended having pattern 0. I have double checked and got the same results. Maybe some version differences? Mine is 5.0 x64.
I'm having the same issue. The sequencer works and has multiple patterns, but the midi notes do not change it. How does the midi played get to the effect? There must be a missing setting or step not revealed.
I had the same problem. Seems like the octaves can be misaligned. I found out that putting the trigger notes starting from C5 worked for me (even though the megababy plugin said C4).
Have followed instructions to a "T" but in the sequencer pane I have no notes on the left hand side and no piano like roll along the top where you have white, green and red etc. Could it be the version I am using or because it is a trial version
Great tutorial as always, Kenny. You might want to change the title to include the RS5K and Megababy, which might help other users... then again, I understand why you left it out. Better for total Reaper beginners!
For those who can´t silence the sequencer even when there is not midi track, create an empty secuence, then create a new midi sound (copy and paste like on the video) and select the note that triggers the empty secuence
I feel like I'm missing something but I've done everything you say in the video? I'm setting my kick for example to C2 but when I input a signal into the C2 box, nothing plays.
Same with me.. though it initially worked, now whatever I do I don't have any sounds in the megababy. Don't know what's wrong, nothing is muted.. Have you managed to sort it out? :)
This is insanely slow, I have a huge library of drums, how am I going to test out several drums to figure out which works best and preview them quickly??
I wish we could divide tied notes, instead of only being able to divide notes based on the grid. Like if my grid is by 1/16ths, I'd like to be able to also make 1/16t. Or if the grid is by 1/8ths, I'd like to also create 1/8t notes.
Hi Great video. Question: is there a way to use a midi pattern in a midi item to record or load a pattern into the sequencer. Here is why. I use trigger finger pro as a controller and sequencer. I have a terrible lag problem. to fix it I manually adjust and quantize. When I do this in mega baby it records totally different. I want to know if after I adjust it if I can import it into mega to do my song arrangement. Or if you have ideas for the lag problem a video on that would be great. Ty
Not certain, but it looks like drums on white keys and cymbals on black keys - sort of ... That and leave some space between assignments so you can add more "in between" later, if you want.
so the step at 7:31 when I play it just plays the snare ones no mater the pattern ??? totally new at making beats so i dont know a lot of jargon, thanks
Is there a way to then split this into separate tracks without a lot of copying / deleting? Just thinking about adding FX to, say, the drums and not have it effect everything else? Thanks!
I already did this tutorial, but I want to add one more track with different drums (different virtual instrument) on top. But if a select the same midi keys for the second track it gets in conflict with the first one. One solution is that the second track has different midi keys but is there a solution in which each track has the same midi keys but different instruments?
Set the second track to a different MIDI channel, and see if you can set your keyboard controller's global midi channel on the fly (like with Arturia controllers). That's a workaround that worked for me. Also make sure both tracks aren't armed at the same time (unless you have two different midi keyboard controllers on two different midi channels, and/or setting the Midi Inputs individually on the track, instead of "all Midi inputs"). That is something I mess up all the time. Keep us posted!
My pattern keeps playing after the lines I drew on the piano roll are over. Does anyone know how I can fix this? 16 notes from my piano roll are being linked to Megababy but don't seem to be controlling the sequencer.
SOLUTION: to stop the pattern from continuing to play, I had to make a blank pattern and put that on the camera roll. Simply ending the piano roll note will not stop the sequence.
You mean the sequence length? There's a slider for it at the top of the sequencer. If you mean maximizing it, just drag it up your screen and it will be big.
Unless there is a better way, after getting things set how you like save your sample list under save fx chain. Later you can Load FX chain and there you are.. Hope this helps!
The stuff starting from notes mapping is quite confusing. Reaper 6.26 shows C3 for 48 note (which we chose for Kick) but sequencer maps this note to C2. Later when we are switching patterns with midi-keys, it's also 1 octave higher than selected in sequencer. Otherwise really nice tutorial.
Same for me. Something changed...
This fixed why I couldn’t hear a kick! I made both the sequencer and the kick C1 and could not figure out why it wasn’t making a sound! When I changed the sequencer to C0 it made a sound finally! Thank you! 🎉
we need a updated version of this. mine doesnt work at all like yours. thanks for all of you're tutorials, i've learned alot!!
anyone knows why i get C3 instead of C2 when i type 48 to choose the midi note that trigger the sample? then the C3 is not the kick on the sequencer, i get it on C2 like here even though it is C3 when i choose the note in the fx settings
Same exact problem for me. Glad I spotted this comment. Kind of a confusing glitch.
Set the midi Off-set. You can found it into :
Options, preferences, MIDI octave name display off-set: -1 octaves
@@cpasoft Thank you SOOOO much!
Спасибо большое
@@cpasoft ty bruh
As others found, note C2 was C3 etc etc regardless of what it says I found the sound by laying notes in the sequencer and sweeping the green keyboard bit until i heard them, they were all grouped around C1 D2 etc regardless of them actually being C2 or 3. Hope this helps. A little confusing. Otherwise another good vid KG, thanks.
Note starts are about 12 below what yours are: for example C 3 = 48. So when I select a note in the midi sequencer it corresponds to a different sound, for example C3 = shot 1 instead of snare.
Set the midi Off-set. You can found it into :
Options, preferences, Media, MIDI setting, MIDI octave name display off-set: -1 octaves
nothing will play even when i press the black button. i followed you step by step but im struggling to get any sound what so ever please help.
I did mine in reaper V6 and was able to match 8 bars pretty well. My kick was mapped originally to C3 in the sampler as others have suggested here. The way I resolved it was to just ignore it in the sequencer and put the kick at C2 like in the video. It's an interesting way to make drum beat- I have a million drum samples, just not a million years to do it in.
So I've ran everything as correctly as possible, and have no trouble with making patterns or anything like that, but whenever I pace notes on the track it only plays a single pattern from the MegaBaby and doesn't change even though I have it set to pattern change. Can someone DM me what the problem is and how I can fix it? I've been trying to figure this out for weeks now.
great tutorial, thanks!
How is this better than double clicking a standard MIDI track and working in the default MIDI editor? Is this just a legacy alternative method of laying down drums?
For some reason I drag my sample in ... and nothing happens?
I have an issue because I am using linux when I press alt it drags the window around instead of lengthening the hit , any other way about it?
how can i reset the starting point of the sequencer within the song? i usually have my project starting at bar 2, not the 1st bar and i have short breaks and stuff in between the patterns
why can’t i hear it
can we just drop the sound that we want to use in the note. like drag and drop
Yes.
I had a problem with the samples "echoing". I would add the first sample and things would work fine then copy-paste add the 2nd, 3rd etc and all of the copied samples would have a very strange sound, not the sample sound. I found that my up to date version of reaper changes the "mode" setting from "Sample (ignores MIDI note)" to "Note (simitone shifted) by default. if you have weird other worldly sounds coming out of your sample like you are summoning demons from the deep make sure mode is to Sample (ignores MIDI note).
yeahhhhh! Thanks for that!
How can i stop de sequencer from looping all over again even though i set up the pattern trigger?
I've got the same problem... :(
Hi! Somebody knows how i can add some FX using the Megababy like for exemple a reverb just on my Clap and not on the rest of the pattern? Thanks a lot !
Is it me or is this not at all user friendly? I never had so much trouble in a DAW just creating a basic beat
It's a mess. Looks like a shareware spreadsheet knockoff from 1995.
Great tutorial, thanks Kenny. I watched both this and your other "first drum beat" video. I must admit I don't quite see why one would use the sequencer, given it's possible to do everything just by creating MIDI notes in a MIDI item - either playing them on a HW keyboard, or just painting them in. And it seems like the UI for the MIDI item is a bit nicer to work in than the sequencer one; and you have to use a MIDI item to trigger the sequencer anyway. But of course it's always good to know about all the options available, and probably more advanced sequencers than Megababy have other advantages vs just using MIDI items.
My sequence just keeps playing even if I don't put in a MIDI item
I don't know what the hell I'm doing wrong. I've done this tutorial more than once before and for some reason this time it's just not working for me I've even gone through and completely restarted the tutorial. I'm 4 days deep into this track I'm working on so I'm not starting the track over. For some reason the track with the sequence drums on it will play pattern 0 no matter what even if there's no midi event on that track. If the effect is on it will play pattern 0 no matter what. Unless I open the effects window and manually switch it to beat one and in that case it'll just play that forever and ever and there's not even anything on the track. I had to use mute envelopes to get it to be quiet until I wanted it too but then when I wanted to switch patterns it just doesn't do it it just stays on pattern 0 forever. The only way I could get it to switch to a different pattern would be to create an all-new track copy and paste my sequence to beat and then use a mute envelope to mute the first sequence and unmute the second sequence at the right time which is a totally unacceptable work around. Does anyone know what the hell is going wrong
Same here.
oh yes the same thing, don't know what to do!
Did you ever find a solution for this?
@@justinmcfeeters951 have you tried assigning the different patterns to different notes and then drawing the notes on a midi section of the recording time-line? If so... Hmm.... Lmk
@@NickyJamesTV Yes, it still just immediately plays whatever pattern I have selected as soon as I press play and ignores any midi triggers.
This is so well thought out. It is a great instructional video!!!!
hey there,i try this at reaper 6.05 and have no sound!it seems that it sends the signal of each drum but i can not listen.(i don't use any midi keyboard).any idea?
Great tutorial as always! I'm having trouble subdividing the note at 13:00. I'm on a mac but the key combo you mentioned doesn't work for me. Is there another way to do it?
same here
Shift + Right click drag up/down works for me. Had to Google it.
This video is GOLD!!! I wanted to turn WAV files into midi. I can make a bunch of WAV files from my drum machine, or use some samples from a disc I bought on Ebay years ago with 29,000 drum samples. This is going to be different than anything I've ever done. I always program my drum machine with the exact speed I want & make a wav, then transport it to reaper. Now I can use wav samples & turn them into midi in reaper.
What the fuck is this speech pattern, and who told your generation its okay? I'm dead. "So when you use reaPER......You want the setTINGS.......... to look like this."
The samples doesn't load in the sequencer. Any help?
same here it wont load the files he used in the video. for hardware I just got a GTX 1660 super GPU, a Ryzen 7 3800X CPU, Corsair DDR4 3600 MHz RAM, MSI X470 Gaming Plus Max Motherboard, and a western blue M.2 ssd.
In fact I just thought of something and it fixed my issue, if you also have an SSD than make sure to put the samples into a folder under the "REAPER (x64)" Folder. My theory was that because they're saved on two different drives there was some sort of conflict. I don't know if that's true or if it will fix your pc cause I am not that knowledgeable on computers, but if it does than let me know
For some reason my patterns won’t change when I draw in the midi item and copy and paste. Instead of changing to the next one it stays playing the same pattern, continues playing while ignoring the midi items I pasted. The only way I can get the patterns to change is by linking them with the alt button/first method. Anyone know what’s up?
Hi I made the same
I don't have sounds on my sequencer megababy
I don't understand
Can you help me?
Same with me.. though it initially worked, now whatever I do I don't have any sounds in the megababy. Don't know what's wrong, nothing is muted.. Have you managed to sort it out? :)
Same problem here.
This is good instruction but when it gets to when you "draw" the pattern at the end, it just doesn't work, very confusing and I'm really considering not working with reaper because it's so confusing for a beginner.
This might seem ridiculous but for whatever reason I follow exactly in getting the samples in but the sequencer doesn't actually play them, they play on the piano notes but not the sequencer
I'm leaving a solution i couldn't find in the other comments. Using the sequencer, even after you set up the last trigger it will keep playing the sequence indefinitely. A solution i found to stop the sequence is to set up an empty pattern. Say pattern 15 which can be triggered by D#5 i believe. Leave that pattern empty and then trigger it via that midi trigger like D#5. if you only have 2 drum patterns like pattern 0 & 1, then you can leave pattern 2 empty and trigger it with D4. If you don't want drums until a certain point in the song, make sure your first measure of the song has that empty pattern trigger and then change the trigger to a filled in pattern where you want the sequencer to start.
Nifty! Thanks a lot!
Can someone at Cockos give Gol a call and explain they need help with an ongoing UX/UI step sequencer disaster?
The drums Keep going out of sync with my samples and my click track. Any advice?
I was following step by step, almost everything went all right but C4 (etc) did not change the sequence pattern, all bars ended having pattern 0. I have double checked and got the same results. Maybe some version differences? Mine is 5.0 x64.
I'm having the same issue. The sequencer works and has multiple patterns, but the midi notes do not change it. How does the midi played get to the effect? There must be a missing setting or step not revealed.
I have no idea, tried everything and no go yet.
I had the same problem. Seems like the octaves can be misaligned. I found out that putting the trigger notes starting from C5 worked for me (even though the megababy plugin said C4).
Set the midi Off-set. You can found it into : Options, preferences, MIDI octave name display off-set: -1 octaves
@@cpasoft Mine just keeps playing pattern 0
Kenny Gioya, you are my god. Thank you for converting me to reaper.
Have followed instructions to a "T" but in the sequencer pane I have no notes on the left hand side and no piano like roll along the top where you have white, green and red etc. Could it be the version I am using or because it is a trial version
Thank you, your tutorials and its pace are great. Thanks for sharing
Thanks for this Kenny - I had no idea Megababy even existed, let alone was now part of Reaper install. It's great.
Great tutorial as always, Kenny. You might want to change the title to include the RS5K and Megababy, which might help other users... then again, I understand why you left it out. Better for total Reaper beginners!
downloaded ml drums it loads into reaper but I can't seem to sequence them they don't all appear
Great tutorial, I'm learning a lot from your vids
the notes seem to be different for me for some reason but I got to the end thanks for the great tutorial
It’s not letting me drag and drop the files into reasamplomatic
Thanks Kenny. Can you show us how to route the drums to individual channels? And can you do poly-rythms with Megababy?
For those who can´t silence the sequencer even when there is not midi track, create an empty secuence, then create a new midi sound (copy and paste like on the video) and select the note that triggers the empty secuence
I feel like I'm missing something but I've done everything you say in the video? I'm setting my kick for example to C2 but when I input a signal into the C2 box, nothing plays.
Same with me.. though it initially worked, now whatever I do I don't have any sounds in the megababy. Don't know what's wrong, nothing is muted.. Have you managed to sort it out? :)
@@8ogdan701 Put "Megababy midi sequencer" before all sample (6:55)
why is it so complicated to set up?
I can't even preview drums before puttin them in a sampler...
if theyre wav files then just double click them in the folder where you downloaded them
Use the Reaper Media Explorer. Set Auto-play on.
if I buy the 60 dollar one can I use the beats I make for my UA-cam videos
Yes.
mine does not start at the begging of the drum beat
I had the same problem - go to the main Reaper timeline and move playback head to 0.
This is the best Drum Beat Reaper tutorial I've found. thanks a lot man!
Thanks brother im new in this daw reaper thanks for your great tutorial..GOD blessed you..
Sensory percussion 2 ?
that was pretty cool just downloaded that today. This is how I spend most of my Saturdays, looking for something different
Wowwww...excellent vídeo tutorial...that's it what I was looking for...thank you soooo much...🙌🏻🙌🏻🙌🏻🙌🏻🙌🏻🙌🏻🙌🏻🙌🏻🙌🏻
Oh boy yes I can definitely use this instead of a drum VST right off the bat, thanks!
This is insanely slow, I have a huge library of drums, how am I going to test out several drums to figure out which works best and preview them quickly??
You can open up the media explorer and go to your sample folder to test them all out quickly.
Reaper Media Explorer.
My numbers and your number of by 10 on my computer for setting sequence assignments. And some did come in their lotted place. Not sure what happened
why does it still play if you don't have a pattern? I got mine to trigger in the piano roll but it still plays even if I don't have a pattern.
I wish we could divide tied notes, instead of only being able to divide notes based on the grid.
Like if my grid is by 1/16ths, I'd like to be able to also make 1/16t. Or if the grid is by 1/8ths, I'd like to also create 1/8t notes.
thank you so much
wow!!! I got that, just excellent explanation and demonstration!!
When I switch MIDI Trigger to On (Pattern Change) it create an accent in each 3rd bar... Does anybody know how to fix it?
I changed the notes like you did but mine were lower by 10. And not all notes showed up in the sequence
Good one! It seems that a lot of the commenters below could use a deep dive on Reaper basics, both capabilities and concepts.
Hi Great video. Question: is there a way to use a midi pattern in a midi item to record or load a pattern into the sequencer. Here is why. I use trigger finger pro as a controller and sequencer. I have a terrible lag problem. to fix it I manually adjust and quantize. When I do this in mega baby it records totally different. I want to know if after I adjust it if I can import it into mega to do my song arrangement. Or if you have ideas for the lag problem a video on that would be great. Ty
This was so helpful. Thanks. I like sequencing drums and stuff.
Great tutorial, it was easy to follow and for a 4 years old, it is still uptodate. Thanks again!
12:45 Note Modifier
18:58 Alternating/Linking Patterns
19:40-24:56 Midi Trigger/Midi Item/ Midi Editor
Thank you, answered all of my initial questions very clearly. Onto the next video!
I’m getting confused bringing the drum beat I made into a track
Cool thanks! Could you process drum sounds individually after? Or is everything locked to one track
THERE'S A SEQUENCER?!?!?!
SON OF A B#%*#, OH GOD I'M SO DUMB
Honestly I haven't finished this tutorial but so far your explanation is easy to follow. Great job!
spectacular thank you...
Thanks Kenny! Why did you OR how did you decide on which midi notes trigger each Drum sample?
Not certain, but it looks like drums on white keys and cymbals on black keys - sort of ... That and leave some space between assignments so you can add more "in between" later, if you want.
so the step at 7:31 when I play it just plays the snare ones no mater the pattern ??? totally new at making beats so i dont know a lot of jargon, thanks
Is there a way to then split this into separate tracks without a lot of copying / deleting?
Just thinking about adding FX to, say, the drums and not have it effect everything else?
Thanks!
Routing
mm.. some alternative? firts drump beat now doesn't exist :/
I found it (Y)
How can u add more notes in the megababy?
I tried all your step but I can't seem to trigger the pattern sequence eventho I turn on the Midi trigger its so annoying
Hit 'Play' [Spacebar].
I already did this tutorial, but I want to add one more track with different drums (different virtual instrument) on top. But if a select the same midi keys for the second track it gets in conflict with the first one.
One solution is that the second track has different midi keys but is there a solution in which each track has the same midi keys but different instruments?
Set the second track to a different MIDI channel, and see if you can set your keyboard controller's global midi channel on the fly (like with Arturia controllers). That's a workaround that worked for me. Also make sure both tracks aren't armed at the same time (unless you have two different midi keyboard controllers on two different midi channels, and/or setting the Midi Inputs individually on the track, instead of "all Midi inputs"). That is something I mess up all the time. Keep us posted!
thanks for the great vid. i did the same thing step by step, with a few issues, but this is good info
My pattern keeps playing after the lines I drew on the piano roll are over. Does anyone know how I can fix this? 16 notes from my piano roll are being linked to Megababy but don't seem to be controlling the sequencer.
SOLUTION: to stop the pattern from continuing to play, I had to make a blank pattern and put that on the camera roll. Simply ending the piano roll note will not stop the sequence.
@@lukemccrae1617 thx for the tipp. what is the camera roll?
Awesome video, Kenny! Great stuff here..
That's a real chore compare to how easy it is to do in fl studio!
another one
amazing. now its like fruity on roids
You are Best 👍👍👍👍👍
А перевода нет серии уроков по ударным?
Awesome beat
This is so cool....
How is he resizing the megababy sequencer?
You mean the sequence length? There's a slider for it at the top of the sequencer. If you mean maximizing it, just drag it up your screen and it will be big.
Happy I found this
best tutorial ever
Is there a way to save it so i dont have to do it over and over again everytime i open a new project ?
Unless there is a better way, after getting things set how you like save your sample list under save fx chain. Later you can Load FX chain and there you are.. Hope this helps!
Save the track as a template
Really helped me, thanks!
Why was this uploaded twice?
I fixed a few problems with the first upload.
excellent!!!
Kenny your tutorials are super helpful. They are really clear, super well organized and in the perfect sized chunks. Thank you!