DS18 RY-HARNESS.HD (Unboxing) Harley Davidson Plug and Play Harness For Amplifiers

Поділитися
Вставка
  • Опубліковано 31 гру 2024

КОМЕНТАРІ • 21

  • @jayredd3379
    @jayredd3379 Рік тому

    I want to say thank you for this video because I bought you guys amp wiring kit and realized that it would not fit the amp I bought which is the DS18 X4 micro amp. After searching online I came across this video.
    I have a 2014 Harley Davidson ultra limited & I am doing a four speaker setup with DS18 PRO-CF6.2NR 6.5" Mid Bass Speakers in my batwing and DS18 PRO-CF69.2NR 6x9" Mid-Bass Speaker in my speaker lids.

  • @rtidriver1210able
    @rtidriver1210able 7 місяців тому +1

    With this harness I don’t need to run an amp wire from the battery. The wires on this harness will power a 400 watt amp?

  • @rifleinfotvrit2520
    @rifleinfotvrit2520 16 днів тому

    Do you have one for 2024 road glide

  • @dtirone1977
    @dtirone1977 4 місяці тому

    Do you still need to run a cable to the battery if you use the harness with an X4 amplifier?

  • @Frito505
    @Frito505 Рік тому

    Is there any install videos

  • @scottvaletti3696
    @scottvaletti3696 Рік тому

    I just installed the harness along with Skar 400.4 amplifier in my stock Harley GT 6.5 (with 6 speaker/2 amp flash). Using the RCA input to the amplifier. It seems like the input to the amplifier will not turn the amplifier on until my volume control is @ 90%. Ground Zero 6.5 SPL speakers. Need help.

  • @Mayhem_LORMC
    @Mayhem_LORMC 2 роки тому +1

    Dumb question, I have a 2017 RGS and I’m adding two 6x9 speakers in my lids and then I have my 2 speakers in the front, how would I wire this up to have all 4 speakers connect to the amp?

    • @jayredd3379
      @jayredd3379 Рік тому +1

      Any luck.., because I’m doing kinda the same thing but with the ds18 x4 micro amp…

    • @Mayhem_LORMC
      @Mayhem_LORMC Рік тому

      @@jayredd3379 if you are using the stock head unit, the harness plugs into your old one and then into the radio. The provided harness will plug right into the amp. It’s very simple and easy. Everything is wired and mounted right in the fairing. The only wires I had to run were from my lids. Very easy. If you need any help let me know, I will gladly walk you through it.

  • @karansingh5900
    @karansingh5900 2 роки тому +1

    Hi what if my radio is flashed then the signal coming out of thid harness can be very very low. Is it possible to buy this video a converter ?

    • @DS18Sound
      @DS18Sound  2 роки тому

      Flashed radios should work ok , only change it is the EQ tune that will be flat instead

  • @garciajr1982
    @garciajr1982 Рік тому

    When will it be back in stock?

    • @itsgoingdown1974
      @itsgoingdown1974 11 місяців тому

      They are in stock now. I got one last week.

  • @Dawop
    @Dawop Рік тому

    Do you still have to flash radio

    • @timnevitt2993
      @timnevitt2993 Рік тому

      yes or use a dsp

    • @JamesJones-qx8go
      @JamesJones-qx8go Рік тому

      How do you flash radio

    • @timnevitt2993
      @timnevitt2993 Рік тому +1

      @@JamesJones-qx8go three ways
      1 send in radio to have flash
      2 take to harley dealer to have done
      3 buy technoresearch radio flasher

    • @JamesJones-qx8go
      @JamesJones-qx8go Рік тому +1

      @@timnevitt2993 thanks!

    • @Dawop
      @Dawop Рік тому +1

      @@JamesJones-qx8go I didn’t have to I just plugged that harness in one peice advice make sure you have your speed volume all way up I put it in off thinking was better wasn’t I was like dam I went threw cutting my lids and all this and isn’t loud any way just trying save my headache to you speed volume it plus button all way up

  • @crhoey69
    @crhoey69 2 роки тому +1

    Sweet!