Forgotten Old Axe Restoration / Hardening the Blade + New Handle
Вставка
- Опубліковано 26 чер 2024
- #restoration #asmr #relaxing
In this exciting video, we give an old, rusty, hiking axe a second life!
You'll see the entire hardening process, including preparing and heating the axe, and cooling and annealing it to achieve optimal blade hardness.
Once the hardening process is complete, we will proceed with the installation of the new handle by selecting the appropriate material and machining it.
You will learn how to properly attach the handle to the axe blade and make it ready for use. But, you will also see what difficulties I encountered.
Watch also other videos - • Restoration Cleaver [M...
Forgotten Old Axe Restoration / Hardening the Blade + New Handle
0:00 - 1:27 - Disassembling the axe
1:27 - 3:49 - Preparing the axe for sandblasting
3:49 - 5:17 - Annealing process
5:17 - 6:28 - Grinding and sharpening the axe
6:28 - 6:41 - OMG!
6:41 - 8:22 - Hardening and tempering the axe
8:22 - 9:55 - Making a handle for an axe
9:55 - 11:26 - Axe assembly
11:26 - 12:06 - Test! - Навчання та стиль
You should have started again and put a new handle on it,
Nothing wrong with making a mistake that’s what teaches us,
Practice makes almost perfect.
Что-ж ты сделал, толстый гвоздь забил и расколол такую хорошую красивую ручку. Надо было сперва хотя бы отверстие просверлить как под шуруп, чтоб не лопнуло дерево.
ну срукожопил, с кем не бывает. но за то, что "заклеил", минус конечно.
шуруп туда и надо было.
That is why holes should always be pre-drilled....
Nice job you did! 🙂👍
Watch the new video, where I restored the cleaver to a mirror-like state:
ua-cam.com/video/F0b2MWvs1jQ/v-deo.html
ua-cam.com/video/F0b2MWvs1jQ/v-deo.html
Don't forget to subscribe 👍
Ну,блин,надо было просверлить,а оригинальный гвоздь или раскаленный загнать,или на клей в сверленное отверстие...
Videos like this really lets me know the level My Mechanics is on.
You're a good man that you learned to drive a car as soon as you got into a car for the first time
Just an analogy 😉
Trabalho fantástico meu amigo. Show.
Железку хорошо восстановили, вопросов нет. А вот топорище странное, грибок непонятный, изгиб не совсем правильный по отношению к режущей кромки. Ну и на обухе требовался шуруп, но никак не гвоздь, результат предсказуемый. Н
Удачи в будущих проектах!
Спасибо за аргументированную критику 🙂
Или хотя-бы,засверлился троечкой, как-так, вроде опытный мастер,а так прикольно, сделал себе такой же , их на барахолке много еще встречается.
the secret note got me....I subscribed....
ahaha thank you!
Я пошутил, молодец мастер, нет слов. 😊
Bardzo świetnie jest odrestaurowana ta siekiera pozdrawiam twórcę tego filmiku serdecznie 👍👍👍👍
Excelente 👏👏👏
That was a beautiful job.
IT REALLY WORKS
MUCH IMPROVED!!!
Lindo trabalho ! Meus parabéns!
figured it was gonna split... should have drilled a hole a bit smaller than the nail!
helps prevent splitting...
beautiful axe though, fine job!
Perfect
Drill a hole and use a wood screw.
It's amazing 👍👍
Impressionante bom trabalho
Good job 👍 ❤
Imagino que depois de ser restaurado seja vendido 😊
Good job, I always hope to learn something when I watch these videos.
Amazing! ❤
❤
Magnifique!!
Great Work!!!! Looks terrific
Good work dude.
გამარჯობა❤️
Мастер-ломастер
so amazing 👍
I don't know why the ax was put in the fire several times without any change in it? Despite what you did, the scars and digging in the ax remained.. I regret to say that it is not good job
That handle will never hold up with that split. Your repair is inadequate for any real use of that hatchet. You should just start over...and don't try pounding a nail into a new handle again. Use a screw and drill a pilot hole first. Otherwise, your restoration was good.
Bro i think u went a lil too hard on him 😂
@@AlphaPiggy 😂
Ficou óbvio que ele fez isso de propósito somente para chamar atenção, o fato de ter botado cola só ironiza isso mais ainda.....
@@AlphaPiggy
You said "hard on". 😂😂
@@alrio8102meant to put a coma there
saudações do brasil, seu canal é muito bom!
ESTE restaurador é muito bom, restaura sem tirar a antiguidade do objeto
Wonder why the cheek and eye portion was attached seperate from the bit and beard by the two obvious rivets? Might have to try and recreate this design. Note: the nail split would have been avoided by pre drillig the hole where the pin was nailed...
Such a design. Alas, I did not know more.
Mais interessante foi essa madeira essa é boa mesmo
good job
Рукоятка просто смешная.Детская.
need some training regarding hardning and temporing
Drill bits before the nail might have helped
great restoration! 99 out of 100 people would have thrown that baby in the trash! Keep it up!
Nice video keep it up
За такой расход, 10 штук Китайский тапорик можно купит. 😅
Nice video!
👍👏
Excellent work! I had to restore an old ax, I can say that it is a troublesome job
This is true :)
Thank you 😊
@@uniquethings6032 Please tell me which camera you shoot with?
@@johnfix5 Lumix dmc g7, 3.5-5.6
@@uniquethings6032 Great shooting!
@@uniquethings6032 Does it need a lot of light?
Vc vai deixar o cabo rachado ? Pelo menos preenche o buraco com cola e serragem aí fica bonito
Gosto deste restaurador, porque ele conserva a antiguidade 🇧🇷
Bravo
It is a hand ax that is surprisingly weak in construction. The forge-welded part will be subjected to a large impact linear elasticity and will eventually be destroyed.
The purpose of the ax is not to chop wood 😉
i enjoyed to see this video, outstanding transformation .Thanks and good luck to your channel.
👍🏻👍🏻
Перед тем, как вбить гвоздь, нужно засверлить. Тогда дерево не треснет.
Он хотел показать как делать ненадо.а если так то можно замазать.нестрашно.
Very good brother
А для чего шкант в топорище забит?
Good job.greetings
That'll rust again due to there being two pins in the axe head that wasn't worked on underneath and that handle will split more then it already has best bet was to drill a hole before driving a nail in
EU NÁO VOU REPROVAR PELO TRABALHO NOTA 10 PELA MACHADINHA NOTA 3 NÁO GOSTEI FICA PARA A PROXIMA
👌👌👌👌
В конце трещина в топорище, всю работу перечеркнула, мастер рукожоп
What was the reason for the rawl plugged hole at the end of the handle?
Probably available materials
Зачем гвоздь такой большой вбивать что ручка треснула? Маленьким саморезом мог бы обойтись, если конечно это видео не из Бангладеша)
Nice job, u did the best u could do and it looks great
Thank you 😊
Надо было отверстие просверлить чтоб нелыопнула
After you put that glue in the split, you could have taken the nail out and clamped the heck outta the split and it would have closed up. The glue is stronger than the wood (if using a good PVA) and it’ll be good to go. Then drill a hole and put the nail in (for cosmetic more than anything).
Thought you were starting on a new handle at the end there. 🤣
Great work bro!
Well done❤😊
Thank you 😊
What kind of stove is that, I've never seen a stove like that?😮
this is a Ukrainian oven, it was used more than 50 years ago :)
@@uniquethings6032 Is it what people used before gas/electric stoves?
@@fredfry5100 Yes. As you can see, metal circles are like burners, just for different sized pots, pans or kettles. Also, there is an oven, which was used to make bread or traditional Ukrainian "palyanitsa"
Sorry the handle split. Blunting the end of the nail is an old trick to help not split the end of a board when driving a nail in it.... not sure if it would help driving a nail in the relatively thin piece of hardwood though.
Great that you keep it original, didn’t cut to give “a new shape” to the axe like many guys when restore something like this.
Just feel coz handle got cracked!
Great job
Beautiful work and great handle indeed; I love it so much!
Thank you 🙏🏼
Топор очень старинный. Ещё интереснее, какой металл использовался?
kerjomu kui,..kesuwen,,,
Ролик затянут ппц... Уснуть можно
Great restoration. I feel bad that the nail split the handle.
Should have drilled a pilot hole
Не ручку, а топорище! Так называется деревянная часть топора! А у косы - косовище.
Он с Жемчужины, один топор одна команда😂
Судя по тому чайнику точно наш.
он из Украины
@@rukozhop83 Показал как делать нельзя.
You better have restored the panel on the stove instead of dealing with some 🪓 and 🪔!!! Panel on stove screams for a wire brush✨!!! Here's an idea for the next restoration!!!
В моем понятии топор кованный из двух частей не заслуживает такого внимания при реставрации. Это не древний топор викингов.
A não acredito que deixou com o cabo partido kkkkkkk
Hey 👋. Good job, I like it. I’m subscribed and 👍🔔
Хорошая работа👍на реставрацию вещи принимаете?
Винятково. ...треба дивитись речі .
Трещину в топорище нужно было остановить маленьким отверстием, лишь потом проклеивать.
такую трещину уже не остановишь.
Хорошая реставция, но рукояьку ....
The nail bracket should have been removed...never penetrate the handle below the head.
Sapına çiviyi çakmadan önce küçük bir delik açsaydın kırılmazdı.
se tivesse furado com uma brocacfina nao lascaria o cabo .
Per evitare che il legno si crepasse bisognava usare il trapano.
Якщо морилка для деревини, то з України. Вітаю! Але те, що руків'я трісне без просверлювання було зрозуміло)
Iron filler....?
Asah kita buat perang .
Топорик малый, туристический, СССР, не?
The ax was badly damaged and you did what you could, congratulations.
Wooh, such deep afterrust craters as lunar :) just wanna say: Heuston, Eagle landed.
С этого топора получится хороший суп кг,металла в россии стоит 20 копеек наш друг потратил на это много времья и прочее
Hubiera perforado con una mecha de madera y no hubiera habido la rajadura en el mango del hacha
ミイラみたいな斧。
Was that axe forgotten in a fire pit?
POR EL SIMPLE HECHO DE NO HABER CURADO LA GRIETA EN LA MADERA PRODUCIDA POR EL CLAVO, LE DOY UN 3 DE 10.
Лучше бы ты ручку заново сделал
Все испортил гвоздем(