Engraving on a Tumbler with the xTool F1
Вставка
- Опубліковано 29 чер 2024
- xTool Halloween Discount Event through November 2, 2023 www.xtool.com/pages/halloween...
My discount link on qualifying purchases (copy the discount code toward the top of this page and paste it in the "discount" area during check out) www.xtool.com/pages/halloween...
In this video, I engrave on a powder coated tumbler using the xTool F1 for the first time (after doing sample engravings on a throw away tumbler).
Design (modified a bit) www.creativefabrica.com/produ...
Safety Glasses amzn.to/46J4xgB - Навчання та стиль
We are so lucky you are giving us all the inside scoops Marilyn 🎉❤🎉
Awwwww, Heather, you are too kind! Thank you!
Thank you for being as thorough you are! It's very helpful!
You are so welcome! I'm glad it was helpful
Hi Marilyn, You did a great job. I really appreciate that you did a complete tutorial from design to finished product 5 thumbs up!!!!!
Thank you so much!
Great tips, thanks for sharing!! That shadow effect looks great! I made my 1st acrylic keychain!
Yay!!! Getting started is the hardest part:)
Oh! My Goodness Marilyn, I'm so very happy seeing you demonstrating with the original rotary. I have both but the RA2 intimidates me just looking at it and all its parts. Thank You! Thank You! Ms "Sam" in TN😊
I don't have the RA2 but it does look intense:) We just drove through Tennessee last night and today. Very pretty state!
I love it
Thanks Deloris!
Great info! Thank you for sharing !
Thank you so much!
@@MakingwithMarilyn you're welcome! Do you have any videos engraving glass on the F1?
I cannot wait to see what you have to bring us next…
Enjoyed the video!
Thank you so much!
That computer desktop made my skin crawl.
It does have that effect on a lot of people. Thanks for watching, despite the jumbled mess of my desktop:)
IT'S STILL NICE AND IT'S MY FAVORITE COLORS. YOU HAVE SOME GOOD TOYS (MACHINES) OVER THERE.
Thank you Stacey!
Good vid
Thank you very much!
HEY MARILYN. THAT SHIRT IS BEYOUTIFUL. NEW TOY I SEE.
Hey, great video. Did you have any success on the 1 pass testing?
#replay- Love it and looks great!!
Tracey
I'm sorry, I didn't see your comment until now. It was in a section where comments are held due to the hashtag:) Thanks so much for watching, Tracey!
@@MakingwithMarilyn no problem and enjoy your day!
I just CLICKED LIKE 👍🏽 ❤
Thank you, Donna!
I have the xtool D1. I use some sort of weight inside the tumbler to keep it from shifting slightly with each rotation, I filled a sock with marbles and that worked well. You can also adjust the speed the rollers move in the software. Thanks for the video!
Thank you so much for these suggestions! I really appreciate you letting me know about them!
where is the best place to get the cups? is there a way to do more coverage on the tumbler, similar to a full coverage?
I just buy mine off of Amazon. And, yes, you can do a lot more coverage.
so for the YETI. dark color. what is the final setting? (since your fooling around with it at first)
I haven't tried a Yeti, but for this powder coated tumbler, I started with the blue light laser and did 100% power with a speed of 400. Then I used the infrared light and did 50% power with a speed of 400.
That is so cool! The only issue I see is you’re making me want to spend money again 🤦🏽♂️. What happens if you push lines per cm even higher than 200? Does it get to a point where you don’t see a difference anymore in “resolution?”
Thank you! I bumped this up to 300 for a few of my little samples, and with such simple wording, I did not really see a difference. I need to play around with it some more to see what types of images it makes a big difference on.
Total noob here so please excuse me if this is a silly question. I just received my F1 today and the rotary should be arriving tomorrow. In your video you focused the laser before moving the dot to the top of the tumbler. Is that ok to do since it is probably only a cm or so difference in distance between the tumbler and the laser or should it be done once the light is at the top of the tumbler?
It probably would have been more technically correct to refocus once I got it to the top. I was so excited to jump in and try this:)
Tnx for the clarification Marilyn. The rest of my shipment came in last night so getting everything assembled and ready to go. Keep the great videos coming as I find you are one of the few that explain the whole process. @@MakingwithMarilyn
#replay. I missed this with my timer set and all😢😢
I'm sorry, I didn't see your comment until now. It was in a section where comments are held due to the hashtag:) Thanks so much for watching!
thanks but wow that desktop
I know, it's awful. I keep trying to clean it up a bit:)
Where is your favorite place to order tumblers
My favorite tumblers have been Realkant and Hiipoo tumblers from Amazon. I have ordered from Alibaba before and they are less expensive, but I have had better results with the others.
Hello everyone
Hello and thank you for watching!