You can move the lens flare by clicking its 'Color Fill' thumbnail and moving it in the main window (saves faffing about with that little pop-up window). You can also use its 'Layer Opacity' to fine tune its brightness.
I have been watching a lot of your posted videos and started to use some of your methods. They are more clearer and self explanatory to follow. I am a fan.
Nice! I see how your creativity flows. I'm old school, so my question is that If you want to print this, how many Dpi would you utilize for high resolution? Jr. designers may need to know that.
There is 1 silver logo id to be re-created if I PM you would you a video if it could be done? It was a logo that was only seen at the start of the TVs pilot episode and never seen again. And another tv logo that's red and gold. Would you be interested?
Good one! Thank you! Can this work on objects other than texts? Bevel effect is ok as far as the object is flat and extruded facing the camera, I would pretty much love to learn how it is done on the objects like Iron Man Suit.
I followed the steps, but the effect is only applied to stroke of the letters and the stroke of the borders. How can I fix this? The problem starts around the steps at 1:20
Here is another way of doing it. Add a New layer on top. Then fill that layer all black with paint bucket tool. Then add the lens flare. Then change blending mode to Screen.
@@photoshoptutorialsbylayerl1447 when I render 3d, the background wont change like the video. The video has subtle gray tone 3d look finish, but mine is just white. While I changed the 3d preference settings as well. No matter what I do the background remain white. On the next part background wont change with the color balance as well.
Pretty smooth sailing up to around the 3:00 mark. I do the same actions as you, but it doesn't display the same options you have 🙆🏼♂️ I'm on an HP Laptop (PS2021)
You can see me adjusting the bottom tabs. Make sure you adjust the top tabs also. Click on the top left tab and set it to 100% Opacity. Top right tab should be 100% Opacity also.
for some reason I am getting a blue-ish tint to the end result.... have you ran into this at all? I am not sure where exactly it goes wrong... Great tutorial by the way. I am glad I stumbled upon your page!
Can you timestamp the exact time that your photo starts to look blue. You can always a Hue/Saturation adjustment layer on top, then lower the Saturation.
@@photoshoptutorialsbylayerl1447 thank you for the reply. i figured out that my curves layer was defaulting to cmyk for some reason. once i converted the image to rgb it fixed itself. thanks!
I hope your business is doing well! Unfortunately I currently do not do gigs at this time. But there are a lot of designers that will be happy to work with you!
Hi Greg. What does your logo look like? Is it text or just one object? Note that if your photo size is larger than in the video, then some of the settings may need to change.
Nope..I used another ogo and that didn't work eithher.....i get as far as bevel amd emboss and it just stays flat...you are missing something out.....you said it can be done on an existing logo....I have tried 2....desn't work...
Chris you will see it when you click the color box in the left panel menu. The color picker will pop up and you will be able to enter it in that window. I hope that helps.
You learn more from UA-cam than graphic design schools
Yeah. a lot of resources on youtube!
I couldn't agree more 💯
Unfortunately your statement is so true.
youtube has surpassed any course on anything existing, it would take you more time to learn photoshop in an actual course than online lmao
Steps are so simple and final result looks amazing
Thanks :). I try my best to make it easy to follow.
can you do a video like this where the lighting and the chrome is animated in ae?
Hi AppleKid. I haven't really worked with Ae.
The power of photoshop seems incredible! And thank you for this valuable video. You explained everything perfectly...
I am glad it was easy to follow!
Detailed tutorial with amazing results. Thank you!
Welcome Fahr
You can move the lens flare by clicking its 'Color Fill' thumbnail and moving it in the main window (saves faffing about with that little pop-up window). You can also use its 'Layer Opacity' to fine tune its brightness.
Thanks for the tips!
Whenever I drag the logo to the new tab, it loses is chrome and quality. What am I doing wrong?
Make sure the new tab settings is set to SRGB and not CMYK
Sir how many Resolution set on adope photoshop for this process.
1920 x 1080 pixel.
This is the best tutorial anyone can find on UA-cam!
Thanks for the compliment Sana!
I have been watching a lot of your posted videos and started to use some of your methods. They are more clearer and self explanatory to follow. I am a fan.
Thank you Ray for watching and being a loyal subscriber!
will you guide me from 1:8 which you select the top layer and press CTRL how did you so?
So Informative and simple !! Instructions were so easy !! Great job !!!
Thanks for watching cineg
Amazing! thank you so much
Glad you liked it!
is this effective just in text layer?
You can use text or objects.
Thanks this will be my photo for my channel
Cool looks perfect!
A PS action would be great, do you think it is possible with such quite complex treatment ?
Yeah it is possible making it with an action.
Thank you so much, until now i did not know this chrome effect is that much a easy process..
Welcome Ino. Yeah the chrome effect is cool!
thanks a lot!!! this took my logo to the next level, gold!
Cool! I am glad your logo came out looking good!
thanks dude, you made me really happy today
I am glad you are happy, welcome
Hi. I just dropped logo onto the black background, however, the coloring is not quite there. Please assist
You can adjust the Hue/Saturation layer on top and adjust from there.
Hello! The color of the metal can be changed? For example i have a black and red logo that i want convert to look shinny metallic
Yes, the color you start with doesn't matter and can be changed.
Works well, this is what was trying to find to make my Space Ponder logo look metallic
I hope your logo turns out looking great!
Thanks! I love this video!
Welcome Daniella
Using this for my next album art! Thank you!
Cool! I love your music. Good luck on that adventure!
I haven't watched it yet but I really appreciate your efforts.. kudos 👏
Thanks Emmy!
You wouldn't happen to have a tutorial on how to create this effect in Gimp 2.10.32 would you?
No, sorry, I have never used Gimp
Still a great refresher!
Thanks Amari!
Can i do the same editing in Adobe Photoshop 2015/2016???
Because i have a very low end pc.
My spec are : i3 1st, 2gb ram, 2tb hdd, no gpu..
Yes, it should still work.
Nice! I see how your creativity flows.
I'm old school, so my question is that If you want to print this, how many Dpi would you utilize for high resolution? Jr. designers may need to know that.
Usually 300dpi
can you do this in adobe effects for text colour
I haven't tried adobe effects.
Nice
good luck broo
Thanks Ayoub. Good luck to you too.
There is 1 silver logo id to be re-created if I PM you would you a video if it could be done? It was a logo that was only seen at the start of the TVs pilot episode and never seen again. And another tv logo that's red and gold. Would you be interested?
You can post a link here.
What resolution and image size are you using here please?
In the beginning shows.
@@photoshoptutorialsbylayerl1447 where? i don't see it anywhere how many px x how many px and resolution? at what time of the video please?
I found this video very helpful. 🤝💥
I am glad you found it helpful!
Good one! Thank you! Can this work on objects other than texts? Bevel effect is ok as far as the object is flat and extruded facing the camera, I would pretty much love to learn how it is done on the objects like Iron Man Suit.
Yeah it can. But when doing objects, it is harder because of different depth.
good lesson! thank you! just took me 1 hour to follow all the steps!
Welcome Alejandro! I hope it worked all well!
Grate tutorial) And grate music on bg. What a music it is?
Thank you for watching! Sorry, I forgot the artist and song name.
Can you make same with name "Abdul Rahman" in good font with golden colour chrome
It is possible to do other words and fonts.
Can you make Abdul Rahman in golden colour
I followed the steps, but the effect is only applied to stroke of the letters and the stroke of the borders. How can I fix this? The problem starts around the steps at 1:20
What version of photoshop do you have?
Thanks so much bro
Welcome Sebastiann!
Waa unable to add flare as it needs to be restorised. How can I fix this?
Here is another way of doing it. Add a New layer on top. Then fill that layer all black with paint bucket tool. Then add the lens flare. Then change blending mode to Screen.
can you make logo of mc waguan and shine it
You can make any logo.
Wow, that was awesome! Thanx!
Thanks Penguin for watching my videos!
I tried this with Black Text just text, but unable to do it. Mine looks so dull :(
Agreed, followed the steps correctly with a logo I created and looks so dull and awful.
Which part of the video did it start to look different from yours?
@@photoshoptutorialsbylayerl1447 when I render 3d, the background wont change like the video. The video has subtle gray tone 3d look finish, but mine is just white. While I changed the 3d preference settings as well. No matter what I do the background remain white. On the next part background wont change with the color balance as well.
@@photoshoptutorialsbylayerl1447 ibb.co/jH0Ckkq
@@photoshoptutorialsbylayerl1447 ibb.co/v34Kj2R
Thank you. It’s very useful❤
I am glad your found it useful!
Thanks for ur efforts and the result us beautiful and wonderful like that kind of silver ...which PS version did u use here?
I am using the current version of Photoshop CC 2021.
@@photoshoptutorialsbylayerl1447 Thank u 4 ur reply so can I use little bit old version and do the same u did here????
Yeah you can.
@@photoshoptutorialsbylayerl1447 Thanks alot!!!!!!
Welcome Asma
It was amazing video! but i want project file please :)
Unfortunately I do not have the PSD anymore, sorry.
Pretty smooth sailing up to around the 3:00 mark. I do the same actions as you, but it doesn't display the same options you have 🙆🏼♂️ I'm on an HP Laptop (PS2021)
Are you talking about the "Gradient Editor"? Click on the first gradient color option. Then you can make the gradient same as mine.
@@photoshoptutorialsbylayerl1447: Thank You 🙏🏼 I got through it today.
Mobile me ye app ps download kaese kare
The software is called Adobe Photoshop CC
i just start learn photoshop. i'm still failed at gradient overlay. to balance colour, black-white-black.the rest i can follow well
What part of the video? You can post timestamp on the exact part of the video you need help with.
@@photoshoptutorialsbylayerl1447 at 3:42
@@photoshoptutorialsbylayerl1447 black 0, white 50, black 100. i'm still struggle to adjust at black 100 one
You can see me adjusting the bottom tabs. Make sure you adjust the top tabs also. Click on the top left tab and set it to 100% Opacity. Top right tab should be 100% Opacity also.
Thank u Man U made every step easy
I am happy you found the steps easy! Thanks for watching.
What version photosop do you use ?
I use Photoshop CC 2023
for some reason I am getting a blue-ish tint to the end result.... have you ran into this at all? I am not sure where exactly it goes wrong... Great tutorial by the way. I am glad I stumbled upon your page!
Can you timestamp the exact time that your photo starts to look blue. You can always a Hue/Saturation adjustment layer on top, then lower the Saturation.
@@photoshoptutorialsbylayerl1447 thank you for the reply. i figured out that my curves layer was defaulting to cmyk for some reason. once i converted the image to rgb it fixed itself. thanks!
Thank you very much!
Welcome Cmyk
Fabulous instructions! thank you so much!!!!!
Welcome Ted. Thank you for watching.
Great concise tutorial - well deserved thumbs up and a subscribe
Thanks for the compliment Drucilog
Wow, that is amazing. I am in need of this for my business logo, but I do not have photoshop. Could I hire you to do this for me?
I hope your business is doing well! Unfortunately I currently do not do gigs at this time. But there are a lot of designers that will be happy to work with you!
@@photoshoptutorialsbylayerl1447 awhhh dang! i can’t find anyone who does this as well as you! no chance you can at all?? if not do you one anyone?
Maybe another youtuber can help you out on making logos. I am not good at transferring ideas to a design haha.
What's the song @ the end 9:13 ???????
Shibuya from youtube free music.
@@photoshoptutorialsbylayerl1447 THANKS !!!!!!!!!
Very easy tutorial, thanks broo
Welcome Andre!
Great tutorial!! ✨ thank you for sharing! 🙌
Thanks DGTL
Thanks man!
Welcome Tornado
So amazing thnk so much
Welcome Ultra, thanks for watching.
Nice Job! It was fun & easy to follow. :)
I am glad you found it fun and easy to follow Sayson :D
i made the same steps with numbers but the end result is different
Send a photo on what yours look like
This was a life saver! Thanks so damn much man!
Welcome Alehyer!
Does this work with other colours? not just silver?
Yeah, You can add a Hue/Saturation layer on top. Then select Colorize, then change the colors from there.
I tried twice but it didn't work. cs6
Looks difficult for making shinny logo special, but if do will self get motivated know learn how to edit get final result
It's easy if you go step by step.
I can't find the magic wand tool :(
Try right click on the "Quick Selection Tool".
Thanks a lot for this tuto ; great !
Thanks Christophe!
Thanks😀
Welcome Jun
Ek aesa hi design m DW ka logo bana do plzzz plz PLZ
nice work... will you send me this psd file?
Hey, thanks for watching! Unfortunately I do not have the original PSD files.
I tried with a third logo.....I have followed intently for about 3 hours, every step....I'm not getting anywhere near....
Hi Greg. What does your logo look like? Is it text or just one object? Note that if your photo size is larger than in the video, then some of the settings may need to change.
I need a logo like this ? Is there a contact number ? Or where I can reach out to get this done ?
I do not have a number.
Amazing Bro..Thans
Thanks Kahar
Thank you
Welcome Vincent
thank you so much Bro...
Welcome Ankit.
Nope..I used another ogo and that didn't work eithher.....i get as far as bevel amd emboss and it just stays flat...you are missing something out.....you said it can be done on an existing logo....I have tried 2....desn't work...
If I can see the end result of your logo, I can help.
thank you!!
Welcome Lisa! Thanks for watching!
Great, my friend!!! And the result is impressive ,and the lesson is quite detailed and even gave the source materials!! 👍👍👍
Welcome and thanks. And if you ever get stuck, I am here to help.
@@photoshoptutorialsbylayerl1447 💜
Amazing! Thank you!! 🙏🏻❤️
You are welcome Ty!
wow i like this
Thank you Asihegbu
Very nice 😊
Thanks!
What the hell kind of menu option is "adadad"?
Hey Christopher, what part of the video does it say that? Can you let me know the exact timestamp in the video.
Chris you will see it when you click the color box in the left panel menu. The color picker will pop up and you will be able to enter it in that window. I hope that helps.
I need help
Which part of the video you need help?
Can't do the curves :(
What is the issue? In the curves panel, make sure it is set to "endpoints", left side of that curves panel window.
Maybe the archive is in 32 bits and fail, try with 16 bits, y look this detail and I repair that.
App link please
The app is Adobe Photoshop CC. This is the newest version.
App size
Please send link
This app is Mobile work
www.adobe.com/products/photoshop.html
Very nice... I love it...! Except for the shadow... not realistic at all...! But very good tutorial...!
Thank you Lucian
@@photoshoptutorialsbylayerl1447 ... it's a pleasure to follow your videos...1 thanks for your times to doing this...!!!
Amazing
Thanks :)
Brother please send Photoshop apk
I did this on Photoshop CC.
❤❤❤
His looks like metal mine looks like 90's kids show title 😂😂😂
Great tutorial thank you for going slow with the mouse too
Haha. Play with the settings and it will look different.
thankyou mr
You are welcome!
EXCELENT
Thanks Ramesh
i just transcended to this music
Yeah it is cool music.
PSD plz🥺
I do not think I have it anymore :(
I used a logo, but it didn't work....
Feel free to link a photo to your result and I can help.
can you plz design me a one
It is easy to follow the steps. It is more fun creating your own.
For some reason mine becomes bronze.
You can always add a Hue/Saturation adjustment layer on top. Then select Colorize. Then adjust to any color you want.