Building and Maiden Flight 3D
Вставка
- Опубліковано 14 лют 2021
- You can download and build you own model here:
cults3d.com/en/3d-model/game/...
Mechanics: T-Rex 450 DFC
Mainrotor: MiniTitan
Mainblades: Spinblade Halbsymetrisch 350
New Mechanicsbodyparts: ABS printed with 0.4mm
Body: PLA printed with 0.2mm
Wheels: Reely with Aluminumrim D=25 mm
FBL System: VStabi
Engine: Scorpion MKII 2221-10 3000KV 550W
Servos: Rotorstar
Lightcontroller: Arduino Nano
Flightweight: 1444g - Наука та технологія
I really like how you have integrated the retracts and rear gearbox into the 3D-print model. I was not expecting that and it's really nicely done.
Really well done job.
What a nice job well done I love it
Now that it’s been some time how is the fuselage holding up? What filament did you print with?
Sehr schönes Projekt, ich denke S-Schlag Hauptrotorblätter würden besseren Auftrieb bringen.
Great! I'm looking for an airwolf fuselage, but they are sold out everywhere. Do you think I could scale up this heli to a 500 size? I have no experience at all with 3d printing, so no idea what is possible.
In principle, scaling is possible. The construction of the receptacles for the mechanics and the receptacle for the rear gear must then be adapted.
Printing even with a standard 0.4mm nozzle on a good printer shouldn't cause any major problems. It should be estimated to be stable enough.
But in the end, the only way to find out for yourself is to try it for yourself.
Learning by doing.
Awesome! Do you sale any of your scale fuselage? If so where can I find them?
Thanks.
The link is in the description.
@@The_dream_of_flying Hi I can see you have the plans for sale, I wanted to know if you can print me a fuselage and I can pay you for it as I dont have a 3d printer.
@@planesstevee
I'm sorry, unfortunately not.
A printer is quite cheap these days, so it's cheaper to get a printer and make something yourself.
@@The_dream_of_flying what printer are you using?
Cant i use this for cp master
Hi is there a way to design this rc helicopter better
In what way should it be designed better?
of course there is always a way to design anything better.
what kind of question is that?
bitte bitte bitte mach doch eine Bo105 - PAH für den 450er
I've been thinking about this for a long time too.
how make windows
vacuum forming
privilegy my also on have the what you production on chaincloseoutchainon the applicatyve model plataform Deigth°
Great work and detail!!!! Is there any chance of being able to download the 3d printable files for this and the plans as well? I would love to build this.
Thanks. 🙂
Look at the discription. There is a link.
good speeddraw sketch model fly airodriver on real time life i thos on anciety arrival my retroinvertionon be i goes on relieve kaligraficoz8.8keigth°softwaredrivertocontrolondistance ten km drone kaligraficoz