MICROSOFT FLIGHT SIMULATOR 2024 patch update 1.1.9.0 seems to have fixed the elevator inverted issue many were experiencing. If you find that since this update your elevator controls are now inverted please edit this action: Go to settings > controls Go to Flight Control Surfaces Go To Primary Control Services Go To ELEVATOR AXIS Go To Settings For That Action Select “Set Inverted Axis” to OFF Thrustmaster T.Flight HOTAS One Flight Stick Recommended Controls: Flight Control Surfaces >Control Trimming Surfaces AILERON TRIM LEFT (P)JOYSTICK AXIS 4 AILERON TRIM RIGHT (P)JOYSTICK AXIS 4 ELEVATOR TRIM DOWN (NOSE DOWN) (P) Throttle Stick Toggle Button ELEVATOR TRIM UP (NOSE UP) (P) Throttle Stick Toggle Button >Secondary Controls Surfaces DECREASE FLAPS (P) B3 INCREASE FLAPS (P) B4 >Primary Control Surfaces RUDDER AXIS (P) JOYSTICK AXIS 2 AILERONS AXIS (P) JOYSTICK AXIS 4 ELEVATOR AXIS (P) JOYSTICK AXIS 3 Brakes >Parking Brake TOGGLE PARKING BRAKES (P) PREV >Brakes BRAKES (P) B2 Power Management >Throttle THROTTLE AXIS - (P) JOYSTICK AXIS 1 TOGGLE THROTTLE - REVERSE THRUST (P) NEXT LANDING GEAR >Gears TOGGLE LANDING GEAR (P) Y TOOLS >Simulation Shortcuts ENGINE AUTOSTOP (P) NEXT ENGINE AUTOSTART (P) NEXT >Assistances TOGGLE VISUAL ASSISTANCES DISPLAY (P) B1 COMMUNICATIONS OPEN COMMUNICATIONS PANEL (P) F2 QUICK REPLY (P) F2 LIQUID DROP SYSTEM TOGGLE SPRAY (P) X FIREFIGHTING MISSION TOGGLE SCOOPS OR DOORS (P) X CAMERA >Camera Mode Switches COCKPIT/EXTERNAL VIEW MODE (P) MENU >Cockpit Camera COCKPIT QUICKVIEW UP (P) JOYSTICK POV UP COCKPIT QUICKVIEW REAR (P) JOYSTICK POV REAR COCKPIT QUICKVIEW RIGHT (P) JOYSTICK POV RIGHT COCKPIT QUICKVIEW LEFT (P) JOYSTICK POV LEFT PREVIOUS PILOT POSITION (P) DELETE(DO NOT USE) NEXT PILOT POSITION (P) DELETE(DO NOT USE) >External Cameras EXTERNAL QUICKVIEW LEFT (P) JOYSTICK POV RIGHT EXTERNAL QUICKVIEW REAR (P) JOYSTICK POV DOWN EXTERNAL QUICKVIEW RIGHT (P) JOYSTICK POV LEFT EXTERNAL QUICKVIEW TOP (P) JOYSTICK POV UP >Instrument Views PREVIOUS INSTRUMENT VIEW (P) JOYSTICK POV LEFT NEXT INSTRUMENT VIEW (P) JOYSTICK POV RIGHT >Smart Camera TOGGLE SMART CAMERA (P) F1 BANNER HOOK >Hook Control TOGGLE BANNER HOOK (P) X BANNER POLE >Banner Control TOGGLE LEAD POLE (P) A SKYDIVE SYSTEM >Door Lights DECREASE DOOR LIGHTS SWITCH (P) X INCREASE DOOR LIGHTS SWITCH (P) A
Excellent tutorial!.. So what sensitivity settings would you suggest for a novice like me? When I was using the throttle it was super sensitive moving it up and down.. everything is set at 0 for throttle.
I’m new to this but I’m genuinely confused why you would map the aileron and elevator trim and the main axis for each to the same? Can you explain why you wouldn’t prefer to have a separate control for elevator trim like you would in an aircraft with a trim wheel separate from the yoke?
Honestly, Your channel has helped me so much. I purchased the TM hotas one from your reviews. after watching this video and setting everything up, i am now airborne. Keep doing what your doing!!!!
thanks for the info, i started figuring some of this out on my own, but, theres so much to know, it's overwhelming... i'm gonna give it another try another day, but, for my own sanity, i need a break tonight :)
Hi I'm new to flight simulator and trying to help my son. He said if he pushes forward on the throttle it goes down. Is this what you mean by inverted? How do I fix this for him. If yoh could please help.
@@tekgamerworld FS2024 I need assistance on how to configure the mapping for the alpha xpc and bravo on the xbox? It is showing all in one unit in fs2024. It’s a mess.
Hi! I’ve just got MSFS24 and a T.Flight HOTAS One. I’m new to flight sim and SUPER excited! Would you say this is the best video to use to set up all my controls or is there another one of your videos where you run through all the essentials? Love the videos - Thanks!
You should use this video for airplanes. And this video for helicopters: Full HELICOPTER Config Guide For THRUSTMASTER T.FLIGHT HOTAS ONE | Microsoft Flight Simulator 2024 ua-cam.com/video/j5vAAGow4cA/v-deo.html
Great video, very helpful, thank you so much! The only thing I seem to be missing is, how do you change from normal movement of the ailerons and elevator to trimming?
Microsoft flight simulator has been giving me grief over the past few days and I almost gave up my t flight hotas and that was my only one but luckily for me you gave a tutorial to map the controller thank you so much
I found it very difficult to configure my thrustmaster hotas(joystick,twcs and rudder pedals)for my helicopter ,it was a nightmare!But i have figured it out now!
I made a video for it if you want to compare Manual HELICOPTER Configuration For THRUSTMASTER T.FLIGHT HOTAS ONE | MSFS2024 | Step By Step Guide ua-cam.com/video/j5vAAGow4cA/v-deo.html
Just bought this sim and the first flight my Hotas would not work. So frustrated with all the settings. This has explained it all for me now so thanks so much I can now get some air miles.
I have a similar joystick and in FS2020 I was able to configure the hat switch to pan around the cockpit, thought it seems that there is no way to do this in FS2024, unless I am missing some settings. I hate the quick view options.
Thank you!! It was very helpful! My new Hotas4 with pedal is looks little bit different switch with yours.. Could you guide to setting useful to Joby S4!?
This video is excellent. With a few tweaks works with my hotas 4 and on game pass pc 👍. I think I've also got my helicopter set up. The basics i used were elevator axis for back and forward, aileron axis is to roll left and right I think, rotor axis is twisting the joystick. Collective axis I think is the throttle stick, altitude
You can compare your setup to mine for helicopters Manual HELICOPTER Configuration For THRUSTMASTER T.FLIGHT HOTAS ONE | MSFS2024 | Step By Step Guide ua-cam.com/video/j5vAAGow4cA/v-deo.html
Thanks man , my controller just arrive and when i was testing the throttle my plane would turn left and right lol , testing this settings now if works for me
Thaaaaanks!!!! A question: Do you think there is a way to export/import a specific configuration? it would be easy to import your fantastic joystick configuration in our environment
@@baronio2 you can only do that on a PC, i can make you a profile if you need it. Though I recommend you configure the profile from scratch using my video so you can learn and get the experience.
@@tekgamerworld oh absolutely, your video saved me. But I think the problem is on fly simulator side as the reason a specific preset for hotas while other joysticks are recognized and when you plug in them all the buttons are configured 🤨🫣
Thank you, much appreciated. It would be nice now if there were recommended settings for T. Hotas One for XBox for MSFS2024 as there were for MSFS2020 as control response in MSFS2024 is somewhat different. So far I’ve turned sensitivity in Axis 3 & 4 to -4 in both + and - sensitivity settings for joystick but still find the joystick feel quite twitchy. In MSFS2020 I set this to -20% but in MSFS2024 the grading is different.
Yes, the grading is entirely different, you have to tweak it to what works for you. Knowing my luck, I’ll get it tweaked how I like, and the next patch release will break it.
Hi i have the Thrustmaster T Flight Hotas X is there different with the one and please help me with the setup of it and to use mouse and keyboard i am struggling
Dear Tek I followed your installation but now the elevator trim operated in opposition direction, any solution? Also how to set the speed and heading in the panel, just cannot set them. Thx Herman Sung
To fix inverted flight elevators: Go to settings > controls Go to Flight Control Surfaces Go To Primary Control Services Go To ELEVATOR AXIS Go To Settings For That Action Select “Set Inverted Axis” to ON
Excellent video ... I will now try this (Alienware R12 w/32GB & 3060Ti (for now), MS Win 11, Hotas X, MS24). I tried and tried the "defaults" and it never worked. Then I searched the Internet, found that the defaults are not configured for the Hotas X (yet?), then found your video. Too bad that we have to go through all of this to get it to work, but "so be it" 🙂. So that's my plan for tomorrow
My unbind button (left of the big X button) does nothing except for a camera mode - do i need to bind it to a command to work as an UNBIND? Which command? . Xbox and mouse.
Brilliant video! The only one I remember having on 2020 is using the slider on the back of the Throttle that used to move the nose of the plane up or down to keep to a certain elevation on 2020 though i'm not sure what that would be called haha Gained a subscriber though, I really appreciate this video :)
I actually use to use those for left and right brake, but I’ve since switched to just full brakes. You can assign those buttons to elevator trim up and down if you’d like 👍
@@kylelemon1381 Yeah.. I was having the same issue.. my throttle was super sensitive when I was moving it up and down.. I'm a novice and I wanted to not have the speed going so quickly when powering up or down
@@tekgamerworldI go to hardware settings and it doesnt let me pick the options for adjusting the sensitivity on the right side of the screen. Its just stuck on joystick axis 1 tab what should I do?
Great video thanks. Are you aware if there is a mouse free look issue on Xbox? If I try to look around whilst holding down the right mouse button to look around, it goes haywire! Am I doing something wrong or is this a known bug? Cheers.
@@tekgamerworld yes unfortunately, if you have a mouse to connect to your Xbox, would love to know your thoughts. I think you’d see the problem straight away, works in the menus etc, but in the game……. 😳
Really appreciate the video I could barely play without it. One control I may have missed or can’t find is to set the trim up and trim down I had it set last time on the little clicker behind the throttle any help would be appreciated
I have everything as in your video all works right. I’m trying to get the back of the throttle buttons to do what I did last time.. when I’m looking at the screen and I’m flying from outside the plane. It has the flaps then the trim up and down with the %. That’s what I’m trying to get set up behind the throttle.. if that makes any sense I’m kind of a noob
@@tekgamerworld I believe so, but I still have absolutely zero control over it up or down, everything works fine on Microsoft flight Sim 2020 just 2024 is broken
@fernofinity8997 remove anything bound to elevator trim(nose up) and elevator trim(nose down), and make sure your flight stick is bound to “elevator axis”
Great video but you missed a really important one. I'm having a hard time. How and what should I set for the trim? Can't seem to figure it out. Are you flying without ever trimming?
When trying to create Cockpit Quickview Up, a pop-up appears asking to name new profile. Obviously, I don't want to do this in favor of keeping all my presets for my T.Flight Hotas One controller together, so I don't create the new profile, but backing out or even checking the boxes causes my programmed action to disappear from the list. How should I handle this?
So I’ve assigned elevator trim(nose up) and elevator trim(nose down) to various buttons, including the toggle on the back of the HOTAS One throttle, nothing seems to work yet.
Tekgamerworld thanks for you help. But Im having a problem. i have the Thrustmaster T-Flight Hotas. but somewhere i have missed something when I pull back on my Joystick to take off pull back seems to take me down and push forward takes me off into the air what am I doing wrong? obviously theres a setting somewhere to alter this could you let me know where to go in settings to sort this. Thanks.
To fix inverted flight elevators: Go to settings > controls Go to Flight Control Surfaces Go To Primary Control Services Go To ELEVATOR AXIS Go To Settings For That Action Select “Set Inverted Axis” to ON
@@tekgamerworld I have tried that just set inverted axis but with no change. i pull back on joystick to take off but not going up.but if I push forward on joystick i take off fine. in elevator settings it say below ( conflicts ) 2...Does that mean anything? Elevator trim Down (Nose Down....and ( Elevator trim up) Nose Up......Thanks again Tekgamerworld.
Thrustmaster T.Flight HOTAS One Flight Stick Recommended Controls: Flight Control Surfaces >Control Trimming Surfaces AILERON TRIM LEFT (P)JOYSTICK AXIS 4 AILERON TRIM RIGHT (P)JOYSTICK AXIS 4 ELEVATOR TRIM DOWN (NOSE DOWN) (P) JOYSTICK AXIS 3 ELEVATOR TRIM UP (NOSE UP) (P) JOYSTICK AXIS 3 >Secondary Controls Surfaces DECREASE FLAPS (P) B3 INCREASE FLAPS (P) B4 >Primary Control Surfaces RUDDER AXIS (P) JOYSTICK AXIS 2 AILERONS AXIS (P) JOYSTICK AXIS 4 ELEVATOR AXIS (P) JOYSTICK AXIS 3 (SET INVERTED) Brakes >Parking Brake TOGGLE PARKING BRAKES (P) PREV >Brakes BRAKES (P) B2 Power Management >Throttle THROTTLE AXIS - (P) JOYSTICK AXIS 1 (SET INVERTED) TOGGLE THROTTLE - REVERSE THRUST (P) NEXT LANDING GEAR >Gears TOGGLE LANDING GEAR (P) Y TOOLS >Simulation Shortcuts ENGINE AUTOSTOP (P) NEXT ENGINE AUTOSTART (P) NEXT >Assistances TOGGLE VISUAL ASSISTANCES DISPLAY (P) B1 COMMUNICATIONS OPEN COMMUNICATIONS PANEL (P) F2 QUICK REPLY (P) F2 LIQUID DROP SYSTEM TOGGLE SPRAY (P) X FIREFIGHTING MISSION TOGGLE SCOOPS OR DOORS (P) X CAMERA >Camera Mode Switches COCKPIT/EXTERNAL VIEW MODE (P) MENU >Cockpit Camera COCKPIT QUICKVIEW UP (P) JOYSTICK POV UP COCKPIT QUICKVIEW REAR (P) JOYSTICK POV REAR COCKPIT QUICKVIEW RIGHT (P) JOYSTICK POV RIGHT COCKPIT QUICKVIEW LEFT (P) JOYSTICK POV LEFT PREVIOUS PILOT POSITION (P) DELETE(DO NOT USE) NEXT PILOT POSITION (P) DELETE(DO NOT USE) >External Cameras EXTERNAL QUICKVIEW LEFT (P) JOYSTICK POV RIGHT EXTERNAL QUICKVIEW REAR (P) JOYSTICK POV DOWN EXTERNAL QUICKVIEW RIGHT (P) JOYSTICK POV LEFT EXTERNAL QUICKVIEW TOP (P) JOYSTICK POV UP >Instrument Views PREVIOUS INSTRUMENT VIEW (P) JOYSTICK POV LEFT NEXT INSTRUMENT VIEW (P) JOYSTICK POV RIGHT >Smart Camera TOGGLE SMART CAMERA (P) F1 BANNER HOOK >Hook Control TOGGLE BANNER HOOK (P) X BANNER POLE >Banner Control TOGGLE LEAD POLE (P) A SKYDIVE SYSTEM >Door Lights DECREASE DOOR LIGHTS SWITCH (P) X INCREASE DOOR LIGHTS SWITCH (P) A
just an fyi, they fixed the inverted issue for elevator axis and throttle axis. so where you said to invert those two controls might confuse people that come to this video after yesterday's update.
You just download the software on a Microsoft Windows PC, it’s pretty straightforward support.thrustmaster.com/en/product/t-flight-hotas-one-en/ Download the drivers package, it’s has the control panel software in it
Extremely helpful. Followed step by step just made my own button assignments… HOWEVER, I paused the game for a few minutes and walked away. Came back and even with the joystick centered the ailerons automatically turn the plane left. I have to hold the stick to the right to maintain level flight and do not get a full turn radius even while turning right. Tried restarting flights and checked assignments, nothing changed. Using regular Xbox controller works fine though. Any thoughts? Joystick is brand new 2 days out of the box.
@@jv.nazareth03 if you have the pedals, I found after over an hour of playing with settings… unplug the pedals and plug them back in… for whatever reason it worked.
Hi everyone and Tek. I have the Thrustmaster T-Fight Hotas X. now what I want to know should I be purchasing the Thrustmaster Hotas One? I ask this because everyone keeps talking about the Hotas One, and not the one I have. I would be Greatful of any Suggestions. Thanks.
@@tekgamerworld Argh ok Tek your A star. because I was on the verge of scrapping my Hotas X because thought that was the Problem, but Pleased to know its not now. In a bit I need to go through your video again Im still getting issues with Elevator and throttle. I have inverted like you said But it has to be something im doing wrong Not you at all because I can see your a guy that knows what hes doing. thing is in MSFS2020 my thrustmaster works great. I pull back Plane goes up and push forward plane come down not a Problem. this is so strange. Thanks again Tek your a Star.
Hi Tekgamers world. following up from my previous Posts. Im still having problems taking off and landing. I noticed you use a Thrustmaster Hotas One...I use a Thrustmaster T-Flight Hotas X Joystick. so whats the big difference please. my Joystick works fine in MSFS2020 but MSFS2024 i just cant get it right. I have followed your video from start to finish and still i pull back on the joystick to take off and it just goes down not up, and push forward to come down and the plane goes up?
To fix inverted flight elevators: Go to settings > controls Go to Flight Control Surfaces Go To Primary Control Services Go To ELEVATOR AXIS Go To Settings For That Action Select “Set Inverted Axis” to ON To fix Inverted Throttle: Go to settings > controls Go to Power Management Go To Throttle Go To THROTTLE AXIS Go To Settings For That Action Select “Set Inverted Axis” to ON
@@tekgamerworld ok I will give that ago. I have been on the Verge thinking I needed to buy The Hotas One joystick see. Is the Hotas one Joystick better do you think. if so I may invest in One. Thanks so much for all your Help mate much appreciated.
Hi sorry for my english is not really good i do what you say in youre video i have the same joystick of you but when i put my throttle down he stay 24 % what i doing for stay down 0% thank you.
You have to bind trim to something other than than the toggle on the back of the T.Flight HOTAS throttle…as it doesn’t work, MSFS2024 does register it as Axis +/- The trim commands are ELEVATOR TRIM DOWN and ELEVATOR TRIM UP
Here you go! To fix inverted flight elevators: Go to settings > controls Go to Flight Control Surfaces Go To Primary Control Services Go To ELEVATOR AXIS Go To Settings For That Action Select “Set Inverted Axis” to ON To fix Inverted Throttle: Go to settings > controls Go to Power Management Go To Throttle Go To THROTTLE AXIS Go To Settings For That Action Select “Set Inverted Axis” to ON
MICROSOFT FLIGHT SIMULATOR 2024 patch update 1.1.9.0 seems to have fixed the elevator inverted issue many were experiencing.
If you find that since this update your elevator controls are now inverted please edit this action:
Go to settings > controls
Go to Flight Control Surfaces
Go To Primary Control Services
Go To ELEVATOR AXIS
Go To Settings For That Action
Select “Set Inverted Axis” to OFF
Thrustmaster T.Flight HOTAS One Flight Stick Recommended Controls:
Flight Control Surfaces
>Control Trimming Surfaces
AILERON TRIM LEFT (P)JOYSTICK AXIS 4
AILERON TRIM RIGHT (P)JOYSTICK AXIS 4
ELEVATOR TRIM DOWN (NOSE DOWN) (P) Throttle Stick Toggle Button
ELEVATOR TRIM UP (NOSE UP) (P) Throttle Stick Toggle Button
>Secondary Controls Surfaces
DECREASE FLAPS (P) B3
INCREASE FLAPS (P) B4
>Primary Control Surfaces
RUDDER AXIS (P) JOYSTICK AXIS 2
AILERONS AXIS (P) JOYSTICK AXIS 4
ELEVATOR AXIS (P) JOYSTICK AXIS 3
Brakes
>Parking Brake
TOGGLE PARKING BRAKES (P) PREV
>Brakes
BRAKES (P) B2
Power Management
>Throttle
THROTTLE AXIS - (P) JOYSTICK AXIS 1
TOGGLE THROTTLE - REVERSE THRUST (P) NEXT
LANDING GEAR
>Gears
TOGGLE LANDING GEAR (P) Y
TOOLS
>Simulation Shortcuts
ENGINE AUTOSTOP (P) NEXT
ENGINE AUTOSTART (P) NEXT
>Assistances
TOGGLE VISUAL ASSISTANCES DISPLAY (P) B1
COMMUNICATIONS
OPEN COMMUNICATIONS PANEL (P) F2
QUICK REPLY (P) F2
LIQUID DROP SYSTEM
TOGGLE SPRAY (P) X
FIREFIGHTING MISSION TOGGLE SCOOPS OR DOORS (P) X
CAMERA
>Camera Mode Switches
COCKPIT/EXTERNAL VIEW MODE (P) MENU
>Cockpit Camera
COCKPIT QUICKVIEW UP (P) JOYSTICK POV UP
COCKPIT QUICKVIEW REAR (P) JOYSTICK POV REAR
COCKPIT QUICKVIEW RIGHT (P) JOYSTICK POV RIGHT
COCKPIT QUICKVIEW LEFT (P) JOYSTICK POV LEFT
PREVIOUS PILOT POSITION (P) DELETE(DO NOT USE)
NEXT PILOT POSITION (P) DELETE(DO NOT USE)
>External Cameras
EXTERNAL QUICKVIEW LEFT (P) JOYSTICK POV RIGHT
EXTERNAL QUICKVIEW REAR (P) JOYSTICK POV DOWN
EXTERNAL QUICKVIEW RIGHT (P) JOYSTICK POV LEFT
EXTERNAL QUICKVIEW TOP (P) JOYSTICK POV UP
>Instrument Views
PREVIOUS INSTRUMENT VIEW (P) JOYSTICK POV LEFT
NEXT INSTRUMENT VIEW (P) JOYSTICK POV RIGHT
>Smart Camera
TOGGLE SMART CAMERA (P) F1
BANNER HOOK
>Hook Control
TOGGLE BANNER HOOK (P) X
BANNER POLE
>Banner Control
TOGGLE LEAD POLE (P) A
SKYDIVE SYSTEM
>Door Lights
DECREASE DOOR LIGHTS SWITCH (P) X
INCREASE DOOR LIGHTS SWITCH (P) A
Excellent tutorial!.. So what sensitivity settings would you suggest for a novice like me? When I was using the throttle it was super sensitive moving it up and down.. everything is set at 0 for throttle.
Excellent video. By far the easiest to follow compared to some other videos I've seen.
Thanks! Configuring flight sticks with MSFS2024 is kind of challenging
Really appreciate the time you took to prepare this. Solved my problem. Looking forward to future stuff from you - I'm a new subscriber! Thank You!
I’m new to this but I’m genuinely confused why you would map the aileron and elevator trim and the main axis for each to the same? Can you explain why you wouldn’t prefer to have a separate control for elevator trim like you would in an aircraft with a trim wheel separate from the yoke?
Honestly, Your channel has helped me so much. I purchased the TM hotas one from your reviews. after watching this video and setting everything up, i am now airborne. Keep doing what your doing!!!!
Awesome!
Thank you for watching! Don’t forget to like, share, and subscribe to our UA-cam channel!
thank you so much for making this! without you i do not know what i would have done.
I have already subbed, love how u explain and easy to understand you make it
Thank you so much!! I can’t tell you enough of how much this helped me.
Glad I could help!
hank you for watching! Don’t forget to like, share, and subscribe to our UA-cam channel!
FOR REAL
This helps a lot. Thanks for your video.
@@ZekeLinTube your welcome! Don’t forget to like and subscribe for more!
This is what I was looking for Thank you so Much.
Really appreciate this video. Was able to get my son flying with his Hotas 4. Thank you!
Awesome! Please remember to like and subscribe!
Thank you for the instructions on set up I was on the verge of sending the Hotas 1 back to Amazon
Awesome! Don’t forget to like and subscribe!
For new players having to do this is crazy… thx hope I get used to it
Glad I could help!
Flight sims are generally “harder” than regular games, as they are true to life so to speak.
I watched your video in detail, you are a lifesaver! Thanks for your help!
Your welcome!
You are the man! Thank you! Flightstick is working normal now 🙏
Perfect! If you need any help please let me know!
true life saver man! gained a sub👌👌
thanks for the info, i started figuring some of this out on my own, but, theres so much to know, it's overwhelming... i'm gonna give it another try another day, but, for my own sanity, i need a break tonight :)
Hi, I can help configure your Thrustmaster flight stick to work with Microsoft Flight Simulator 2024, just let me know where you need assistance!
Thank you so much! The inverted stuff was driving me crazy
Your welcome! Don’t forget to like, share the video, and subscribe to my channel. Your support helps us grow!
Hi I'm new to flight simulator and trying to help my son. He said if he pushes forward on the throttle it goes down. Is this what you mean by inverted? How do I fix this for him. If yoh could please help.
so annoying how it isn't automatically mapped like 2020
@@sadken101 yes, hopefully in future patches they fix someone the default flight stick configurations.
Seriously, if it wasn’t free with gamepass I would have refunded it immediately
@@tekgamerworld FS2024 I need assistance on how to configure the mapping for the alpha xpc and bravo on the xbox? It is showing all in one unit in fs2024. It’s a mess.
Been creating my own bindings since flight sim x
Thank you so much for this! I just got the game on Xbox and you’re a LIFESAVER! Thank you so much!!
Thank you for watching! Don’t forget to like, share, and subscribe to our UA-cam channel!
Thanks for the video. For me I didn't have to select the inverted inputs and it worked properly.
Nice, I had to reverse my elevator and throttle inputs.
Very useful video and great clear instructions
Thanks for watching!
Hi! I’ve just got MSFS24 and a T.Flight HOTAS One. I’m new to flight sim and SUPER excited!
Would you say this is the best video to use to set up all my controls or is there another one of your videos where you run through all the essentials?
Love the videos - Thanks!
You should use this video for airplanes. And this video for helicopters: Full HELICOPTER Config Guide For THRUSTMASTER T.FLIGHT HOTAS ONE | Microsoft Flight Simulator 2024
ua-cam.com/video/j5vAAGow4cA/v-deo.html
Thank you man! you solved all my issues.
Awesome! Don’t forget to like and subscribe!
Thank you. So helpful❤
Thank you for your support! Don’t forget to like, share, and subscribe to our UA-cam!
Ur a absolute legend!! Thanks a lot!!
Great video, very helpful, thank you so much! The only thing I seem to be missing is, how do you change from normal movement of the ailerons and elevator to trimming?
Microsoft flight simulator has been giving me grief over the past few days and I almost gave up my t flight hotas and that was my only one but luckily for me you gave a tutorial to map the controller thank you so much
Awesome! Yah configuring flight sticks has been difficult, glad I could help!
Please like and subscribe!
@ no problem I did like and subscribe
I found it very difficult to configure my thrustmaster hotas(joystick,twcs and rudder pedals)for my helicopter ,it was a nightmare!But i have figured it out now!
I made a video for it if you want to compare
Manual HELICOPTER Configuration For THRUSTMASTER T.FLIGHT HOTAS ONE | MSFS2024 | Step By Step Guide
ua-cam.com/video/j5vAAGow4cA/v-deo.html
You are a lifesaver!! Thank you!
Your welcome! Please remember to like and subscribe for more Microsoft Flight Simulator 2024!
This was so helpful, thank you!!!
Thank you for watching! Don’t forget to like, share, and subscribe to our UA-cam channel!
Really thank you from France 🇫🇷 Merci 🙏
Just bought this sim and the first flight my Hotas would not work. So frustrated with all the settings.
This has explained it all for me now so thanks so much I can now get some air miles.
Awesome! Great to hear!
If you need any help, please let me know!
@@tekgamerworld Thanks it's a bit of a minefield, totally different to msfs2020.
I have a similar joystick and in FS2020 I was able to configure the hat switch to pan around the cockpit, thought it seems that there is no way to do this in FS2024, unless I am missing some settings. I hate the quick view options.
Thanks for your help
Your welcome! Please remember to like and subscribe!
Thanks for your help! ✈️
Your welcome! Please like and subscribe if you can!
Amazing work. Thank you for this!
My pleasure!
I was watching this while on my way to work and I hope this works since your comments are saying it’s working!
Let me know if you have any trouble!
@ do you know how I can fix my mouse, because when I would look around it’s very sensitive and I cannot control it.
Thank you!! It was very helpful! My new Hotas4 with pedal is looks little bit different switch with yours.. Could you guide to setting useful to Joby S4!?
Extremely helpful
Thanks for watching! Don’t forget to like and subscribe!
yer thats alot better 😃 just asking you couldnt cover the coms on the flight stick for taxi ?
This video is excellent. With a few tweaks works with my hotas 4 and on game pass pc 👍.
I think I've also got my helicopter set up. The basics i used were elevator axis for back and forward, aileron axis is to roll left and right I think, rotor axis is twisting the joystick. Collective axis I think is the throttle stick, altitude
This is accurate, thanks for this!
👍
You can compare your setup to mine for helicopters
Manual HELICOPTER Configuration For THRUSTMASTER T.FLIGHT HOTAS ONE | MSFS2024 | Step By Step Guide
ua-cam.com/video/j5vAAGow4cA/v-deo.html
Thanks man , my controller just arrive and when i was testing the throttle my plane would turn left and right lol , testing this settings now if works for me
Great news!
Can you make your joystick configuration profile for aircraft and helicopter for PC and upload here?
Many thanks for this video super helpful!
Your welcome! Don’t forget to like and subscribe!
Thaaaaanks!!!! A question: Do you think there is a way to export/import a specific configuration? it would be easy to import your fantastic joystick configuration in our environment
@@baronio2 you can only do that on a PC, i can make you a profile if you need it. Though I recommend you configure the profile from scratch using my video so you can learn and get the experience.
@@tekgamerworld oh absolutely, your video saved me. But I think the problem is on fly simulator side as the reason a specific preset for hotas while other joysticks are recognized and when you plug in them all the buttons are configured 🤨🫣
Can you make a vid for the maxtech joystick?
We don’t have a Maxx Tech to make videos with, sorry about that.
Thank you, much appreciated. It would be nice now if there were recommended settings for T. Hotas One for XBox for MSFS2024 as there were for MSFS2020 as control response in MSFS2024 is somewhat different. So far I’ve turned sensitivity in Axis 3 & 4 to -4 in both + and - sensitivity settings for joystick but still find the joystick feel quite twitchy. In MSFS2020 I set this to -20% but in MSFS2024 the grading is different.
Yes, the grading is entirely different, you have to tweak it to what works for you.
Knowing my luck, I’ll get it tweaked how I like, and the next patch release will break it.
i tried the b5 i really do not understand how to not make it take a screenshot
Is this everything I need to be able to start flying and doing missions?
It should be
@ thank you!
Hello. I wanted to know if flight simulator 2024 puts pressure on the X series console in terms of hardware? I would be grateful if you could help me
It seems to be fine, keep in mind the graphics on the Xbox won’t be as good as a PC with a higher end graphics card
Hi i have the Thrustmaster T Flight Hotas X is there different with the one and please help me with the setup of it and to use mouse and keyboard i am struggling
Hi I don’t have a HOTAS X but I’d be glad to help you out.
Can you elaborate more on the issues?
Thank you for helping😊
Glad I could help! Don’t forget to like, share, and subscribe to our UA-cam!
my rudder works but when i go fully to the left or right it goes back in neutral position??
Dear Tek
I followed your installation but now the elevator trim operated in opposition direction, any solution?
Also how to set the speed and heading in the panel, just cannot set them.
Thx
Herman Sung
To fix inverted flight elevators:
Go to settings > controls
Go to Flight Control Surfaces
Go To Primary Control Services
Go To ELEVATOR AXIS
Go To Settings For That Action
Select “Set Inverted Axis” to ON
@@tekgamerworld Thx Tek, elevator solved. But still cannot set speed and heading by Hotas One. Any solution?
Can you do something to illustrate the settings for the Rudder Pedals? In particular the Brakes and default steering?
Configure Thrustmaster T.Flight Rudder Pedals Controls for MICROSOFT FLIGHT SIMULATOR 2024
ua-cam.com/video/0LR_6wg6p48/v-deo.html
Excellent video ... I will now try this (Alienware R12 w/32GB & 3060Ti (for now), MS Win 11, Hotas X, MS24). I tried and tried the "defaults" and it never worked. Then I searched the Internet, found that the defaults are not configured for the Hotas X (yet?), then found your video. Too bad that we have to go through all of this to get it to work, but "so be it" 🙂. So that's my plan for tomorrow
Let me know if you need any help!
My unbind button (left of the big X button) does nothing except for a camera mode - do i need to bind it to a command to work as an UNBIND? Which command? . Xbox and mouse.
Hey great video thanks! How do I set up the trim? Any tips on that would be great, I’d like to use the rocker on the back of the thrust
Elevator Trim(nose up) and Elevator Trim(nose down), bind those to the toggle.
Please note that for some reason this doesn’t work for some .
I've the same issue however in your video it's set to joystick axis 3 @@tekgamerworld
Brilliant video! The only one I remember having on 2020 is using the slider on the back of the Throttle that used to move the nose of the plane up or down to keep to a certain elevation on 2020 though i'm not sure what that would be called haha
Gained a subscriber though, I really appreciate this video :)
I actually use to use those for left and right brake, but I’ve since switched to just full brakes. You can assign those buttons to elevator trim up and down if you’d like 👍
Good stuff, any advice about sensitivity?
Thanks, for sensitivity, you can adjust via hardware settings to the desired level, takes some trial and error
@ gotcha, nice work mate!
@@kylelemon1381 Yeah.. I was having the same issue.. my throttle was super sensitive when I was moving it up and down.. I'm a novice and I wanted to not have the speed going so quickly when powering up or down
@@tekgamerworldI go to hardware settings and it doesnt let me pick the options for adjusting the sensitivity on the right side of the screen. Its just stuck on joystick axis 1 tab what should I do?
Tysm this helped soo much
You’re very welcome!
HE REPLIED🤩🤩🤩😁
Very helpful. Many thanks 🙏
My pleasure, please remember to like and subscribe. Your support helps our channel grow!
thank you, this video did it
Excellent news!
Please don’t forget to like and subscribe!
Thank you so much!
Thank you for watching! Don’t forget to like, share, and subscribe to our UA-cam channel!
Great video thanks. Are you aware if there is a mouse free look issue on Xbox?
If I try to look around whilst holding down the right mouse button to look around, it goes haywire! Am I doing something wrong or is this a known bug? Cheers.
I’d have to test that, have you tried adjusting the sensitivity?
I have the same issue with my mouse. Right mouse spins the camera all over the place.
@@tekgamerworld yes unfortunately, if you have a mouse to connect to your Xbox, would love to know your thoughts. I think you’d see the problem straight away, works in the menus etc, but in the game……. 😳
Same here
Many thanks for this video. Help Me to use my T.Flight Hotas 4 .
Awesome, a lot of my viewers have had concerns and challenges with the Thrustmaster T.Flight HOTAS 4 and MSFS2024
@@tekgamerworld All work perfect. Thanks again
Really appreciate the video I could barely play without it. One control I may have missed or can’t find is to set the trim up and trim down I had it set last time on the little clicker behind the throttle any help would be appreciated
Do you have the stick bound to “aileron axis”?
I have everything as in your video all works right. I’m trying to get the back of the throttle buttons to do what I did last time.. when I’m looking at the screen and I’m flying from outside the plane. It has the flaps then the trim up and down with the %. That’s what I’m trying to get set up behind the throttle.. if that makes any sense I’m kind of a noob
Please can you do a video showing the mapping to the movement of the stick and buttons like in the plane video?
Like this one?
How To Manually Configure Thrustmaster T.Flight HOTAS One For MICROSOFT FLIGHT SIMULATOR 2024
ua-cam.com/video/n3m9ViASsgg/v-deo.html
No matter what I do I can’t bind trim to the throttle buttons in the back like it was for 2020. Is there anything you can suggest??
Yes, other have reported that as well, they don’t seem to work yet.
So my aircraft is constantly stuck flying at the moon😂
Game sucks
@fernofinity8997 did you set your elevator axis correctly?
@@tekgamerworld I believe so, but I still have absolutely zero control over it up or down, everything works fine on Microsoft flight Sim 2020 just 2024 is broken
@fernofinity8997 remove anything bound to elevator trim(nose up) and elevator trim(nose down), and make sure your flight stick is bound to “elevator axis”
Thank you very much 🙏
Your welcome! 🙏
Really thx !
Thank you for watching! Don’t forget to like, share, and subscribe to our UA-cam channel!
Great video but you missed a really important one. I'm having a hard time. How and what should I set for the trim? Can't seem to figure it out. Are you flying without ever trimming?
I haven’t been able to get elevator trim to work still with the T.Flight HOTAS One.
@tekgamerworld thanks. It's tough to fly without it. Even the normal Xbox controller command isn't working. 😕
Thx really useful
Your welcome!
excellent work. Thank you
Your very welcome! My pleasure!
If you can, please like and subscribe!
I have
Gracias very helpful
Your welcome! Please remember to like and subscribe!
When trying to create Cockpit Quickview Up, a pop-up appears asking to name new profile. Obviously, I don't want to do this in favor of keeping all my presets for my T.Flight Hotas One controller together, so I don't create the new profile, but backing out or even checking the boxes causes my programmed action to disappear from the list. How should I handle this?
Duplicate the existing profile and rename it, then adjust that one, and delete the original.
You set your trim and primary control to the same axis ??. Usually you would use the hat switch which gives small adjustments to the trim.
So I’ve assigned elevator trim(nose up) and elevator trim(nose down) to various buttons, including the toggle on the back of the HOTAS One throttle, nothing seems to work yet.
@tekgamerworld ahh. Might just be bug and hopefully patched out shortly.
Tekgamerworld thanks for you help. But Im having a problem. i have the Thrustmaster T-Flight Hotas. but somewhere i have missed something when I pull back on my Joystick to take off pull back seems to take me down and push forward takes me off into the air what am I doing wrong? obviously theres a setting somewhere to alter this could you let me know where to go in settings to sort this. Thanks.
To fix inverted flight elevators:
Go to settings > controls
Go to Flight Control Surfaces
Go To Primary Control Services
Go To ELEVATOR AXIS
Go To Settings For That Action
Select “Set Inverted Axis” to ON
@@tekgamerworld I have tried that just set inverted axis but with no change. i pull back on joystick to take off but not going up.but if I push forward on joystick i take off fine. in elevator settings it say below ( conflicts ) 2...Does that mean anything? Elevator trim Down (Nose Down....and ( Elevator trim up) Nose Up......Thanks again Tekgamerworld.
Thrustmaster T.Flight HOTAS One Flight Stick Recommended Controls:
Flight Control Surfaces
>Control Trimming Surfaces
AILERON TRIM LEFT (P)JOYSTICK AXIS 4
AILERON TRIM RIGHT (P)JOYSTICK AXIS 4
ELEVATOR TRIM DOWN (NOSE DOWN) (P) JOYSTICK AXIS 3
ELEVATOR TRIM UP (NOSE UP) (P) JOYSTICK AXIS 3
>Secondary Controls Surfaces
DECREASE FLAPS (P) B3
INCREASE FLAPS (P) B4
>Primary Control Surfaces
RUDDER AXIS (P) JOYSTICK AXIS 2
AILERONS AXIS (P) JOYSTICK AXIS 4
ELEVATOR AXIS (P) JOYSTICK AXIS 3 (SET INVERTED)
Brakes
>Parking Brake
TOGGLE PARKING BRAKES (P) PREV
>Brakes
BRAKES (P) B2
Power Management
>Throttle
THROTTLE AXIS - (P) JOYSTICK AXIS 1 (SET INVERTED)
TOGGLE THROTTLE - REVERSE THRUST (P) NEXT
LANDING GEAR
>Gears
TOGGLE LANDING GEAR (P) Y
TOOLS
>Simulation Shortcuts
ENGINE AUTOSTOP (P) NEXT
ENGINE AUTOSTART (P) NEXT
>Assistances
TOGGLE VISUAL ASSISTANCES DISPLAY (P) B1
COMMUNICATIONS
OPEN COMMUNICATIONS PANEL (P) F2
QUICK REPLY (P) F2
LIQUID DROP SYSTEM
TOGGLE SPRAY (P) X
FIREFIGHTING MISSION TOGGLE SCOOPS OR DOORS (P) X
CAMERA
>Camera Mode Switches
COCKPIT/EXTERNAL VIEW MODE (P) MENU
>Cockpit Camera
COCKPIT QUICKVIEW UP (P) JOYSTICK POV UP
COCKPIT QUICKVIEW REAR (P) JOYSTICK POV REAR
COCKPIT QUICKVIEW RIGHT (P) JOYSTICK POV RIGHT
COCKPIT QUICKVIEW LEFT (P) JOYSTICK POV LEFT
PREVIOUS PILOT POSITION (P) DELETE(DO NOT USE)
NEXT PILOT POSITION (P) DELETE(DO NOT USE)
>External Cameras
EXTERNAL QUICKVIEW LEFT (P) JOYSTICK POV RIGHT
EXTERNAL QUICKVIEW REAR (P) JOYSTICK POV DOWN
EXTERNAL QUICKVIEW RIGHT (P) JOYSTICK POV LEFT
EXTERNAL QUICKVIEW TOP (P) JOYSTICK POV UP
>Instrument Views
PREVIOUS INSTRUMENT VIEW (P) JOYSTICK POV LEFT
NEXT INSTRUMENT VIEW (P) JOYSTICK POV RIGHT
>Smart Camera
TOGGLE SMART CAMERA (P) F1
BANNER HOOK
>Hook Control
TOGGLE BANNER HOOK (P) X
BANNER POLE
>Banner Control
TOGGLE LEAD POLE (P) A
SKYDIVE SYSTEM
>Door Lights
DECREASE DOOR LIGHTS SWITCH (P) X
INCREASE DOOR LIGHTS SWITCH (P) A
Thx but my game is in french 😢 Could you share the configuration file plz ?
Hey bud do you know where to find the repair & refuel command
I found it by using the search field, you can search “repair” or “refuel”
It will show as “Repair And Refuel” which is one input for both.
just an fyi, they fixed the inverted issue for elevator axis and throttle axis. so where you said to invert those two controls might confuse people that come to this video after yesterday's update.
I had a feeling that might happen, thanks for the update.
Nice guide thx
Glad my Thrustmaster guide was helpful in starting your MSFS2024 adventures!
Mapping a hotas one joystick for this Sim is a game on its own.🤪
I know, it is indeed
Does anyone know how to setup up the software for the control panel of the hotas one? I am not sure how to do it thanks
You just download the software on a Microsoft Windows PC, it’s pretty straightforward
support.thrustmaster.com/en/product/t-flight-hotas-one-en/
Download the drivers package, it’s has the control panel software in it
@@tekgamerworld Its all good i figured it out i am up and flying now thanks
Extremely helpful. Followed step by step just made my own button assignments… HOWEVER, I paused the game for a few minutes and walked away. Came back and even with the joystick centered the ailerons automatically turn the plane left. I have to hold the stick to the right to maintain level flight and do not get a full turn radius even while turning right. Tried restarting flights and checked assignments, nothing changed. Using regular Xbox controller works fine though. Any thoughts? Joystick is brand new 2 days out of the box.
I'm having the same problem but the plane is banking to the right, did you found any solution?
Try and remove aileron trim left and right bindings, and just use aileron axis.
@@tekgamerworld just tried it. You think maybe just resetting the stick might help or do you have any other suggestions? Everything else works fine.
@@jv.nazareth03 if you have the pedals, I found after over an hour of playing with settings… unplug the pedals and plug them back in… for whatever reason it worked.
Hi everyone and Tek. I have the Thrustmaster T-Fight Hotas X. now what I want to know should I be purchasing the Thrustmaster Hotas One? I ask this because everyone keeps talking about the Hotas One, and not the one I have. I would be Greatful of any Suggestions. Thanks.
The Hotas X is essentially the same as the HOTAS One except it is for PS4/5 & PC, while the HOTAS One is for Xbox and PC.
@@tekgamerworld Argh ok Tek your A star. because I was on the verge of scrapping my Hotas X because thought that was the Problem, but Pleased to know its not now. In a bit I need to go through your video again Im still getting issues with Elevator and throttle. I have inverted like you said But it has to be something im doing wrong Not you at all because I can see your a guy that knows what hes doing. thing is in MSFS2020 my thrustmaster works great. I pull back Plane goes up and push forward plane come down not a Problem. this is so strange. Thanks again Tek your a Star.
You’re the fucking man!!!! Glad i found this channel!!
Thanks for watching!
Can you help me please my goats can’t go up or down in game it’s not entering or something
Hi Tekgamers world. following up from my previous Posts. Im still having problems taking off and landing. I noticed you use a Thrustmaster Hotas One...I use a Thrustmaster T-Flight Hotas X Joystick. so whats the big difference please. my Joystick works fine in MSFS2020 but MSFS2024 i just cant get it right. I have followed your video from start to finish and still i pull back on the joystick to take off and it just goes down not up, and push forward to come down and the plane goes up?
To fix inverted flight elevators:
Go to settings > controls
Go to Flight Control Surfaces
Go To Primary Control Services
Go To ELEVATOR AXIS
Go To Settings For That Action
Select “Set Inverted Axis” to ON
To fix Inverted Throttle:
Go to settings > controls
Go to Power Management
Go To Throttle
Go To THROTTLE AXIS
Go To Settings For That Action
Select “Set Inverted Axis” to ON
@@tekgamerworld ok I will give that ago. I have been on the Verge thinking I needed to buy The Hotas One joystick see. Is the Hotas one Joystick better do you think. if so I may invest in One. Thanks so much for all your Help mate much appreciated.
Hi sorry for my english is not really good i do what you say in youre video i have the same joystick of you but when i put my throttle down he stay 24 % what i doing for stay down 0% thank you.
Put your throttle at 0% and remove the throttle axis binding, and recreate it.
Could you do a tutorial on how to set the camera view on the HOTAS ONE controller? Thank you
You talking about free look or pov left right up down?
Thanks bud
Your welcome! Don’t forget to like and subscribe!
What did you do to tighten the throttle? Just picked mine up and its pretty loose.
The throttle? You can’t tighten that, only the flight stick
@@tekgamerworld yes but the main issue with the set is the throttle being very loose. Barely bump it while its at, say 80%, and it falls to 100
when i recreate i lift up my joystick throttle up
on flight simulator 2020 no problem he go 0 %
Does this work for helicopters? No setting’s come up for me
Manual HELICOPTER Configuration For THRUSTMASTER T.FLIGHT HOTAS ONE | MSFS2024 | Step By Step Guide
ua-cam.com/video/j5vAAGow4cA/v-deo.html
How do I adjust my trim?
You have to bind trim to something other than than the toggle on the back of the T.Flight HOTAS throttle…as it doesn’t work, MSFS2024 does register it as Axis +/-
The trim commands are ELEVATOR TRIM DOWN and ELEVATOR TRIM UP
Thanks great video, what button for spoilers?
B2 is a good one for spoilers
I also have rudder pedals so they are my brakes which I used to have bound to b2
Are the Sensitivity settings still inoperable? This is Feb 26,2024
Mien seem to be working, Xbox or PC?
How do I fix joystick inverted settings like the plane joystick you used in the video?
Here you go!
To fix inverted flight elevators:
Go to settings > controls
Go to Flight Control Surfaces
Go To Primary Control Services
Go To ELEVATOR AXIS
Go To Settings For That Action
Select “Set Inverted Axis” to ON
To fix Inverted Throttle:
Go to settings > controls
Go to Power Management
Go To Throttle
Go To THROTTLE AXIS
Go To Settings For That Action
Select “Set Inverted Axis” to ON
Thx but my game is in french 😢 Could somebody share the configuration file plz ?
Could someone send bro a config file from PC?