that was awesome. Question ? Which one is less expensive the Fx style or the other and how much does the kit from corbin cost ? Is it worth the investment THANKYOU FOR YOUR TIME AND EFFORT
@@nsboost making hybrids is double the time but they fly as good if not better in my FX rifles and the expansion on impact is way way more lethal. Makes the slug diameter double the size of a regular hp.
@@roonimac I do agree with expansion. They are flat deadly. I just haven’t got them to fly as well yet. My superior barrel 700mm .25 is really liking a 32gr standard hollowpoint moving at about 980fps.
Thanks for the reply. Another question for you. I'm looking at getting this starters package the Kit-1S. Its supposed to have everything in it. Witch kit did you get? I'm really looking for a or the Kit that have the smooth sided slugs. Did yours come with that or did you have to order that separate, and will it come with the FX still dies or is that separate too? And why is there website so hard to navigate LOL. I emailed them and got a price list of everything I was looking for. But trying to find that all in one Kit doesnt seem like its there. I'd have to track down every peace one by one. I found that Kit but it just bring you to a description of it. I don't know what i'm looking at.
Hello and thank you for the vid. I am interested in this press and you have answered many questions I had. As I was watching I noticed that your strokes of the press are not consistent. I notice you stroke most of the time with 2 strokes and other times 3 times and the pressure used is inconsistent. Have you weighed your wire slugs to see how consistent they are? If your wire slugs are inconsistent that will make the slug also inconsistent from the pressure needed to remove the excess lead. I am interested in the results of the other options of the die.
If you run the press through a full cycle.. lock to lock.. it doesn’t matter how fast or slow you go.. or how much the lead weighted when you started. They come out consistent. Good technique is to leave the press at full stroke for a couple seconds to allow the lead time to flow. But in my experience it doesn’t amount to much of a difference
@@nsboost I think consistency is the key, try to do everything consistently, I mean yeah if you tap 2x one time and 3x time it might not matter but the thing you said about leaving the press at full stroke for couple seconds I think is important for consistency.
I've been reloading for years and have decided to get into swaging my own projectiles. Where would you recommend I start my education into this field? To be honest just looking at the Corbin price list I'm overwhelmed, mainly due to the fact I don't know exactly what I need to make jacketed .556 and 6.5. Any help would be GREATLY appreciated!
I was the same way even though I already owned 22 cal swage dies and made my own bullets, still would feel lost and overwhelmed on his website. I started reading his book which helped, it was online but I can't find a link anymore and that clarified. After some time you'll start understanding the differences, the book helped me understand the difference between all the different dies he is offering.
Hi Sir, after watching your video many times im interested to buy one, i contacted sales at corbin the price is $769 dollars if im not mistaken, unfortunately, they cannot send outside USA, is there any options to buy this set outside USA, thank you so much
Will these molds work with any press? A friend of mine wants to give me his press from his reloading kit. Or will these molds only work with the Corbin press? His press moves upwards I noticed things Corbin's come down?
The recommended way to lube your cores by Dave Corbin is this: apply a small amount of lube on your index finger and simply roll the core around between your thumb and index finger. IF your press and core cutter were mounted on the front of your bench, you would have much more room to navigate wouldn’t you? 😜🤔
They recommend that your plugs you cut should be a maximum of 3 grains away from your finished slug weight. So a 28 grain plug for a 25 grain slug . I'm not sure why but that's what I was told.
That depends on what caliber you make I think. The Corbin website sells a 5 slug mold for .22 caliber bullets. I think you can also use that for swaging .22 air rifle pellets. You must use pure lead. Do not use lead wheel weights!!! The lead is too hard and you could break your very expensive swaging dies!
@@immolder i am interested in your results. Since I been making my own 22cal slugs for a few weeks. I have tested a few different weights and gotten some good results from different weights. I'll be uploading some videos on my 22 slugs soon.
@@airgunsofidaho4886 It is a fun challenge, shot some today and I am still tweaking for better groups. Not getting what I want yet. I will be looking forward to your video.
It would take YEARS to recoup the cost for personal use. But.. you don’t have to order slugs when needed… you can make them in any weight… Corbin will even make dies to your specs at no extra charge.
@@nsboost “Recoup the cost” is no longer an issue. When the communist left is attacking the Second Amendment from every direction, being able to SWAGE your own bullets IS the skill to have. You’ll pretty much be able to name your price.
If they would sell outside USA they would have much more customers like me, if the quality is really better than the way overpriced Presslug press. 🤔 I can't still find the web page for price lists
They won’t get into the game because there isn’t a big enough market for bullet swaging. Plus, quality swaging equipment is on another level compared to reloading equipment. Highly trained tool makers make swaging equipment where as a button pusher can make reloading equipment (dies, presses, etc).
Im curious to know how much is the kit? Thanks.
I am very intrested to hear the results on the self made slugs accuracy wise!
Hey thanks for the demo. Been wondering about this kit
that was awesome. Question ? Which one is less expensive the Fx style or the other and how much does the kit from corbin cost ? Is it worth the investment
THANKYOU FOR YOUR TIME AND EFFORT
We are a manufacturer of bullet presses. You can watch our videos to learn about our products.
I'd LOVE a video showing how to adjust the weight up and down. You mentioned lowering the punch but won't that cause contact with the point form pin??
What s the size of ur lead roll ...the wire size(mm)
And where to get it?
I ordered this exact setup for the fx hybrid. Waiting on my dye. I got my press.
How much did you buy the piston.. is it good and accurate
Making “hybrids” such. So much work. And I don’t think they fly that well. Standard hollow point o give has been the best for me
@@nsboost making hybrids is double the time but they fly as good if not better in my FX rifles and the expansion on impact is way way more lethal. Makes the slug diameter double the size of a regular hp.
@@roonimac I do agree with expansion. They are flat deadly. I just haven’t got them to fly as well yet. My superior barrel 700mm .25 is really liking a 32gr standard hollowpoint moving at about 980fps.
Wher is the web page from the seller? 🤔
Thanks for the reply. Another question for you. I'm looking at getting this starters package the Kit-1S. Its supposed to have everything in it. Witch kit did you get? I'm really looking for a or the Kit that have the smooth sided slugs. Did yours come with that or did you have to order that separate, and will it come with the FX still dies or is that separate too? And why is there website so hard to navigate LOL. I emailed them and got a price list of everything I was looking for. But trying to find that all in one Kit doesnt seem like its there. I'd have to track down every peace one by one. I found that Kit but it just bring you to a description of it. I don't know what i'm looking at.
Sir, can you tell me how much the kit cost. Thanks.😊
its very expensive as high-end airgun. if you want to buy one, its better you invite your friends or community to joint venture then use it together
Around $1900
@@richlasavage7304 daaaaamn!
Hello and thank you for the vid. I am interested in this press and you have answered many questions I had. As I was watching I noticed that your strokes of the press are not consistent. I notice you stroke most of the time with 2 strokes and other times 3 times and the pressure used is inconsistent. Have you weighed your wire slugs to see how consistent they are? If your wire slugs are inconsistent that will make the slug also inconsistent from the pressure needed to remove the excess lead. I am interested in the results of the other options of the die.
Hello, I need a piston similar to this, can you help me, I want someone to sell it to me, it is reliable, reliable and at an acceptable price 🌷
If you run the press through a full cycle.. lock to lock.. it doesn’t matter how fast or slow you go.. or how much the lead weighted when you started. They come out consistent.
Good technique is to leave the press at full stroke for a couple seconds to allow the lead time to flow. But in my experience it doesn’t amount to much of a difference
@@nsboost I think consistency is the key, try to do everything consistently, I mean yeah if you tap 2x one time and 3x time it might not matter but the thing you said about leaving the press at full stroke for couple seconds I think is important for consistency.
I've been reloading for years and have decided to get into swaging my own projectiles. Where would you recommend I start my education into this field? To be honest just looking at the Corbin price list I'm overwhelmed, mainly due to the fact I don't know exactly what I need to make jacketed .556 and 6.5. Any help would be GREATLY appreciated!
Spend some time on the Corbin website and read. It will tell you everything you want to know.
I was the same way even though I already owned 22 cal swage dies and made my own bullets, still would feel lost and overwhelmed on his website. I started reading his book which helped, it was online but I can't find a link anymore and that clarified. After some time you'll start understanding the differences, the book helped me understand the difference between all the different dies he is offering.
Hi Sir, after watching your video many times im interested to buy one, i contacted sales at corbin the price is $769 dollars if im not mistaken, unfortunately, they cannot send outside USA, is there any options to buy this set outside USA, thank you so much
Great intro to the press. Do the slugs fly as well or better than the factory units? Thaks
What does a Standart set cost?
What guns are you putting these through and what’s the results?
Your press should have come with a rectangular tray. It fits over the die and the extruded lead falls into the tray.
I think cupbased slugs are for less powerful airguns & flatbased are for the powerful ones!
Will these molds work with any press? A friend of mine wants to give me his press from his reloading kit. Or will these molds only work with the Corbin press? His press moves upwards I noticed things Corbin's come down?
where to buy this slugs mold press
The recommended way to lube your
cores by Dave Corbin is this: apply a small amount of lube on your index finger and simply roll the core around between your thumb and index finger.
IF your press and core cutter were mounted on the front of your bench,
you would have much more room to navigate wouldn’t you?
😜🤔
hello sir.. where you buy lead wire for pellets?
where to buy
Hi was wondering what size is the lead wire
0:53 did you fart?
Where do you buy the big coil of lead ??
Any chance you could make a video of the hybrid type slugs
i know corbin sells two kits
what kit did you ended up getting?
That's great how can I get one of these
They recommend that your plugs you cut should be a maximum of 3 grains away from your finished slug weight.
So a 28 grain plug for a 25 grain slug .
I'm not sure why but that's what I was told.
To allow excess to be squished off i imagine
Im from Philippines how can i purchase complete Corbin kit?, thanks..
where can i buy the tool? please give the purchase link 🙏🙏
We are a manufacturer of bullet presses. You can watch our videos to learn about our products.
@@ggjjfjjfhjxghhbv thanks
What does a setup like yours run for?
Where did you buy your press?
Hello sir i am intersting to purchase this machinery
Como cosigo una
how much is the mold
How much is the kit? And what comes with it??
Go to the Corbin website and do some reading. The website is a WEALTH of information.
🤓
good afternoon, dear, could I order a press from you
can you use your own molten lead to cast some lead wire you think?
That depends on what caliber you make I think. The Corbin website sells a 5 slug mold for .22 caliber bullets. I think you can also use that for swaging .22 air rifle pellets.
You must use pure lead.
Do not use lead wheel weights!!! The lead is too hard and you could break your very expensive swaging dies!
Como consigo una 4.5mm
Como hogo para conprar soy de chile
I need for two calibers for FX 0.22 and for edgun leshiy 0.25
Como q faço pra conpra uma dessa
When is your next video? On slug testing
Working on it, should be soon.
@@immolder i am interested in your results. Since I been making my own 22cal slugs for a few weeks. I have tested a few different weights and gotten some good results from different weights. I'll be uploading some videos on my 22 slugs soon.
@@airgunsofidaho4886 It is a fun challenge, shot some today and I am still tweaking for better groups. Not getting what I want yet. I will be looking forward to your video.
I might need to invest in one of those! What is the price savings vs buying name brand slugs?
It definitely isn't cost effective. I look at the ability to customize the slug to my specs, as the reason to buy.
It would take YEARS to recoup the cost for personal use. But.. you don’t have to order slugs when needed… you can make them in any weight… Corbin will even make dies to your specs at no extra charge.
@@nsboost “Recoup the cost” is no longer an issue. When the communist left is attacking the Second Amendment from every direction, being able to SWAGE your own bullets IS the skill to have. You’ll pretty much be able to name your price.
Bagaimana caranya untuk membeli barang ini thanks
So let me ask you this. If you say want to make a 33gn vs a 22gn what would you have to do?
what is the name of the tin you are using, I want to buy the one that looks like a roll
someone already asked but you havent answered what does a 22 set up cost
That’s a vague question. Are you talking .22 air gun pellets, .22 jacketed bullets w/standard jackets, or .22 jacketed bullets w/thick jackets?
🤔
@@mistergrendel32 a 22 air rifle set up
@@le3045acp Go to the Corbin’s website and read the page and links on Air Rifle Pellets. It will tell you everything you want to know. 🤓
How much does a piston cost? What is its quality? Have you tried shooting and accuracy?
The press is about $800 US
hello Mastet greetings to meet me from Indonesia🙏🙏🇮🇩🇮🇩
If they would sell outside USA they would have much more customers like me, if the quality is really better than the way overpriced Presslug press. 🤔
I can't still find the web page for price lists
Bagaimana cara membelinya
how much the press and die
Berapa harga mesin ini pak
Where can I buy it?
What diameter hollow point pin were you using ?
Manaaa akurasi nyaaaa dengan slug baru lo udh 3 minggu gada lagi video nya kelamaan nyeting nya
Maybe if Rcbs, Hornady, Dillon and Lee get in the game it wouldn't cost so much
They won’t get into the game because there isn’t a big enough market for bullet swaging. Plus, quality swaging equipment is on another level compared to reloading equipment. Highly trained tool makers make swaging equipment where as a button pusher can make reloading equipment (dies, presses, etc).
Mademe una para chile
Icek harga ,indo
Gửi về việt Nam tôi mua chiếc
اريد شراء واحدة هل تستطيع ان تعطيني رابط او عنوان البائع🌷
اريد شراء واحده
Cek harga