pretty adamant for an answer when the video answering that is pinned to my channel on the front page. but i give up heres your answer since you werent fooled by the microwave ua-cam.com/video/dQw4w9WgXcQ/v-deo.html
Steady killing it! Your work is hands down some of the best out there. Got my fiber laser 2 weeks ago and your tutorials have helped me tremendously. Thank you for taking the time to make these videos.
Love your work and have bought some template packs to try out (will def buy more in the future). Can you provide any guidance in terms of the hatch settings (and others) you use to get that first cleanup layer done? I know I’ll have to dial in settings for my specific laser but if you can help with a starting point that gets me on the ballpark it would be greatly appreciated. Do hatch and other settings then change based on the design you’re laying down (like if it’s more complex with fine details versus something with less fine lines)?
@@zevfima1027 for polymers I try to keep it the same but minor changes do happen depending on how it looks. Best way to go about getting your laser dialed in and not ruining a bunch of firearms is to pick up some chopped frames. This is where I got mine I practiced on. Very very worth while I don't remember setting off hand at the moment store.otdefense.com/products/chopped-factory-glock-frames
Thank you, will definitely grab some of those and try splitting each side into parts to maximize the space. I have a feeling my hatch lines are way to close (was trying 0.025 but now realizing something closer to 0.08 or even 0.1 may make more sense as I’m realizing the close proximity means the material probably gets hotter than intended and is causing some melting). Thanks again for the vids and tips!
Yo man. Working on my own settings. Out of curiosity, @ about 45 seconds in you're putting down that initial edge to edge pass. What color is that coming out? Looks like a grey but not sure if it's the camera/lighting. I'm getting the same clean layer but mine is more of a super deep brown bordering on black. But I'm also practicing on P80's which is a different material.
@@Crofeye I will definitely make an announcement on here when I'm finally ready for commissions. Still in the process of finishing up my new shop. Once I'm ready I'd be glad to get ya squared away!
@@FragoutDesign That would be really great, but I am from Switzerland and I don't know if the law allows it. Perhaps it would be easier to buy a fully completed modded frame from you.
Hey I know you don't want to recommend your laser engraver but is there one you have heard about that I should look at? I don't mind learning but would like your input on a model or even a brand if you have one in mind. Thanks man appreciate your time
I dunno I didn't name it. But if you want the files it's in one of the glock lowers bundles I have available be sure to read the details and the one with the 17s is it
@@FragoutDesign sorry I should have been more clear. All the videos I see are sides only. No one does front or back even though guns recoil in a way where front and back is more beneficial. Is this because these machines can't do front and back straps?
Ill be posting a video soon about this, do not buy the one i have cause i have one. way better options out there. go back and see my videos with what i went thru on this machine
What laser are you using?
its a Crisper RJ55-MF
What laser machine?
pretty adamant for an answer when the video answering that is pinned to my channel on the front page.
but i give up heres your answer since you werent fooled by the microwave ua-cam.com/video/dQw4w9WgXcQ/v-deo.html
@marktilley3248 ua-cam.com/video/9OZ5r5m_tig/v-deo.html
www.fragoutdesign.com/product-page/glock-lowers-bundle-g17-g19-g22-g43-g43x
Steady killing it! Your work is hands down some of the best out there. Got my fiber laser 2 weeks ago and your tutorials have helped me tremendously. Thank you for taking the time to make these videos.
Hell yeah man slowly but surely lol congrats on the new laser and keep up the hard work!
what business are you guys in or are you starting off as a gun laser engraver?
@@TheTAEclub loaded question been at my main work for over a decade the firearms work going on 3 there but guess it depends on who you ask
That has to be one of the most satisfying videos on UA-cam. Definitely checking you guys out when I’m ready to stipple.
Hell yeah man I'll be here when you're ready thank you for watching
Definitely satisfying
I can imagine Q-Bert jumping from box to box on that stipple pattern! 😂👍 Looks amazing as always G.
Thanks man
Wicked design! 👍🏻
So cool.
thanks joe
If you share the laser speed frequency or power for cleaning the lower
If?
Love your work and have bought some template packs to try out (will def buy more in the future).
Can you provide any guidance in terms of the hatch settings (and others) you use to get that first cleanup layer done? I know I’ll have to dial in settings for my specific laser but if you can help with a starting point that gets me on the ballpark it would be greatly appreciated.
Do hatch and other settings then change based on the design you’re laying down (like if it’s more complex with fine details versus something with less fine lines)?
@@zevfima1027 for polymers I try to keep it the same but minor changes do happen depending on how it looks. Best way to go about getting your laser dialed in and not ruining a bunch of firearms is to pick up some chopped frames. This is where I got mine I practiced on. Very very worth while I don't remember setting off hand at the moment store.otdefense.com/products/chopped-factory-glock-frames
Thank you, will definitely grab some of those and try splitting each side into parts to maximize the space. I have a feeling my hatch lines are way to close (was trying 0.025 but now realizing something closer to 0.08 or even 0.1 may make more sense as I’m realizing the close proximity means the material probably gets hotter than intended and is causing some melting). Thanks again for the vids and tips!
I'm going to your store!
thank you!
Yo man. Working on my own settings. Out of curiosity, @ about 45 seconds in you're putting down that initial edge to edge pass. What color is that coming out? Looks like a grey but not sure if it's the camera/lighting. I'm getting the same clean layer but mine is more of a super deep brown bordering on black. But I'm also practicing on P80's which is a different material.
not sure but you can remove it post laser if you get some weird funk
Super dope. Wish I had a better laser. I got a small diode.
Thanks for watching and the fibers are definitely fun
I like it.
me too
Man what settings are you running? My 30w galvo laser just keeps melting everything even at 1% power.
i dont remember off hand, run your test grids on a couple chopped frames
Wait so you also prep the pistol grip by wearing it down with a laser? Or do you also use rotary tool prior?
Both
Awesome 👏
Thanks
Do you also use the laser to take off the original stippling on the grip? Or do you sand it down by hand?
2" air sander thing
That is beautiful sir...😢
turn that frown upside down
how difficult is it to program the laser to do whatever pattern you want?
If the artwork is done correctly, not hard at all
I would pay very well to get something like this !!
@@Crofeye I will definitely make an announcement on here when I'm finally ready for commissions. Still in the process of finishing up my new shop. Once I'm ready I'd be glad to get ya squared away!
@@FragoutDesign That would be really great, but I am from Switzerland and I don't know if the law allows it. Perhaps it would be easier to buy a fully completed modded frame from you.
Do you have to sand down the sides before you get started or does the fiber remove the factory stippling too?
i do sand down the factory stippling yes.
Notice the notch at the top on the left side is much lower on the right side, completely covering rhe indentation on the left but not the right
Shoo
Love your videos! So therapeutic to watch… what machine do you use for these projects?
Never mind, I see you have it on your page, I’ll check it out there.. keep up the awesome work and keep the videos coming please….
Oh boy Here's More about the machine I have ua-cam.com/video/9OZ5r5m_tig/v-deo.html
How much does laser engraving stippling cost and how long does it take?
thank you
and well done great job
dont know yet on prices
is it possible to just laser off the original stippling?
yeah
that looks amazing what speed and power did u run the laser
default speed, max power. thank you!
Which laser how much W and speed ? @@FragoutDesign
🔥🔥🔥
FIIIIIIIIIIIRE FIIIIIIIIIIIIIIIIIRE
Do you have a video for frame prep? I searched and didn't find one.
nah, just sand that bitch lol if i can do it you can too i promise. im a retarded hamster lol
What type or laser printer do you recommend?
50 watt fiber laser
What kind of laser machine is that? How much does it cost?
Here's More about the machine I have ua-cam.com/video/9OZ5r5m_tig/v-deo.html
I would love to learn how to do this. You recommend any courses?
courses no I don't know of any
Amazing work!
What lenses are you using?
254mm
how long does the stippling last ? durability lifespan ?
Till you jack it up or an asteroid hits the planet. Pretty durable
Where could I purchase a Crisper RJ55-MF??
sounds like a name for an air plane
Is it a fiber laser? Whay are tye settings? To work on that
Here's More about the machine I have ua-cam.com/video/9OZ5r5m_tig/v-deo.html
How did you get the texture on the smaller portion? Is there a file I can download for that texture?
These files are available in my store including this one, check out the glock lowers bundle www.fragoutdesign.com/shop
I just want that texture part to do a full grip with it. Also you are making straight 🔥 🔥 🔥🔥🔥🔥
I have that available too in my store. It's my mimic hand stipple pattern
Hey I know you don't want to recommend your laser engraver but is there one you have heard about that I should look at? I don't mind learning but would like your input on a model or even a brand if you have one in mind. Thanks man appreciate your time
Jpt 50 watt
@@FragoutDesign thank you
@@CokeheadClause fo sho
Awesome stuff, my guy!
Also, to get rid of your side stippling before the laser etching, do you manually sand the frame? Or how do you go about that?
yeah i sand them before lasering, 2" air sander thing i got from harbor freight does the job
How did you go about smoothing down the surface for a laser engraving?
dremel
2" air sander thing with the sandpaper pads
Awesome work!!were do I send my frame?😀
I'm Not ready just yet... but soon
@@FragoutDesign I'm very patient!!😊
Can you share vector file of this design?
yup its in my store www.fragoutdesign.com/shop
is a 30 watt suitable for this ?
thats the minimum id recommend, yes, suitable fo sho
vc usa ezecad2? pode me passa os parâmetros? quero aprender a técnica, tenho 1 30w lente 110
I don't sell settings I just sell artwork
Can someone guide me what equipment he use
Here's More about the machine I have ua-cam.com/video/9OZ5r5m_tig/v-deo.html
What wattage is your machine?
50
what settings did you use and how many passes
I don't remember
how much does it cost to have this done?
I don't know
@@FragoutDesignyou don't know? Is this not something you do as a paid service?
What pattern is this?
I dunno I didn't name it. But if you want the files it's in one of the glock lowers bundles I have available be sure to read the details and the one with the 17s is it
What is this design/pattern called?
Its called "FRAGOUT" mofu*kaaaaahhhhhhh you can get it if youd like here. www.fragoutdesign.com/product-page/glock-lowers-bundle-g17-g19-g22-g43-g43x
@@FragoutDesign looks really good, thanks for letting me know!
fo sho
Hello, can you please provide the parameters for removing the factory texture ? Please …
$80000
What about front and back strap?
Didn't do them
@@FragoutDesign sorry I should have been more clear. All the videos I see are sides only. No one does front or back even though guns recoil in a way where front and back is more beneficial.
Is this because these machines can't do front and back straps?
Where do you guys buy those fiber laser?
dont buy from trotec, god speed.
What laser are you using if you don’t mind me asking?
its a honda 1300 fiber 50watt
@@FragoutDesign honda?
what laser do you recommend for beginners to stipple?
Jpt 30-50watt
What do you think about omteck lasers,they finance ..lol
Do you have 3D printed glock clones to practice on?
@@eddiefrayle no never engraved on a 3d print
@@eddiefrayle no idea never use one
which machine do you have?
Ill be posting a video soon about this, do not buy the one i have cause i have one. way better options out there. go back and see my videos with what i went thru on this machine
Here ya go ua-cam.com/video/9OZ5r5m_tig/v-deo.html
I recently purchased your Glock outline kit. What hatch pattern did you use for the cleaning passes? And line spacing?
I'd have to check my notes their at the shop can't recall off the top of my head. But remind me in like 3 hours and I should be there to check for ya
@@FragoutDesign Hey, sorry. It was crazy today at the shop. I totally forgot to remind you about the settings. I have a 60w mopa
@@1911msp lol not back at the shop yet I'll try to remember
my hatch is 0.07mm for the glocks
@@FragoutDesign thanks. I’ll give it a try. I’ve been running .05LS @ 500 speed on my 60w MOPA
Is that an omtech laser 🤔
No
@Fragout Design Studios 😆 yeah I know just poking the bear 🤣🤘🏼
forshizzle
Can I send my frame to you?
woah woah woahhhh buy me dinner first atleast
Let me send you my lower i want this lol shoot me a priceeee
not ready for commissions juuuuuuust yet but im getting there. hang tight for me
What parameters do you use with that type of material?
I can't do it
I don't know any paratroopers