Seller Gave Up Too Early On This $700 4x4 ATV (HUGE LOSS)
Вставка
- Опубліковано 22 чер 2023
- I buy a 2004 Polaris Sportsman 700cc 4x4 ATV after the seller gave up on fixing it. #Polaris, #BigBore, #Fix,
►SUBSCRIBE: / @2vintage
►MY SECOND CHANNEL: • New Polaris ATV Snow P...
► ADD ME ON ALL SOCIAL MEDIA ◄
► FACEBOOK: / 2vintageyoutube
► INSTAGRAM: 2_vintage_ / 2_vintage_
► SNAPCHAT the2vintage
► EMAIL FOR BUSINESS INQUIRIES ONLY: 2vintagetooo@gmail.com
Thanks for watching and subscribing!
New videos every week!
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. 2vintage( Joe Weber, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL 2vintage( Joe Weber) CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
2vintage (Joe Weber) makes no representation about the sufficiency of any safety precautions and equipment used in this video.
Thanks for taking it off my hands. i would have never thought to have check the flywheel key. have fun with her!
Are you going to buy it back ?
Don’t kick yourself too hard. The work you did is FAR beyond what I could have done.
@@chuckwalla325 things long gone
Wow Joe, your diagnostic skills are absolutely amazing. It's so nice to see a 2-dollar woodruff key fix this problem. It's about time you had a cheap fix as you usually have to pump many dollars into fixing these machines that you purchase. This is a good buy that you thoroughly deserve as not many cheap fix bargains come your way. Well done Joe, your never give up attitude and perseverance is most commendable indeed. Cheers Dave from Port Elizabeth, South Africa.
After his last honda you are right. And I feel that. There isn't many cheap deals for none running bikes and quads right now. People want 2k for locked up dirtbikes.
From what I have seen, many times he gets off cheap on parts. As long as you have the time and skill set, and gross profit is there, you proceed forward.
Getting those plastics off LOL. When I was a mechanic at a powersports dealer, we used to joke that when you work on a Polaris, you just turn your toolbox upside down on the floor, because you are going to use every tool you own. Love the videos, keep up the good work.
You are one smart and patient young man. Well done!
Agree, and very methodical
wish he wasn't so pessimistic he always expects the worst brilliant videosy
Smart????
@@matteedstrom?😊
Been a auto mechanic for 40 years, while watching I was saying to the screen she's jumped time like a car with a sloppy timing chain. Glad you found the issue.
I had a 490 KTM that kept shearing the key till it ruined the crank. Ended up welded flywheel on. It’s still running today.
what caused it to keep shearing off the key?
@@racequad9 the key only locates the flywheel in it's correct place it uses the contact of the taper on the crank and the taper on the flywheel to keep it in place , if you find a sheared key and the two surfaces aren't good its always best to lap them in using valve grinding paste until you have good surfaces then clean all grinding paste off and fit a new key and tighten to the specifed torque, another tip i've seen people fitting too tall a woodruff key thats prevented the tapers meeting and keeps shearing the key, oh also don't lube the tapers I've had customers that have lubed the tapers on cranks too, the contact areas should be dry, possible causes are flywheel not tightened correctly or tapers not good or wrong key fitted holding the tapers off each other even when torqued correctly
Sure it wasn’t a 495 ?
What happens if u ever need to remove the flywheel haha
@@HyngyynjI was just about to ask the same question seems like a quick bandaid repair 😂
You say that you were getting flustered troubleshooting but you were right on target and doing everything in the right order. Push rods should always be perfectly straight, btw. Watching you over the years you can see you have graduated to a top notch mechanic. I'm also impressed with the way you can get things in and out of the shop, like a machine. I was mechanic/service manager for 45 years and you got this down to a high-speed science, good job. Not many people can earn a living like you are doing.
That 100 start attempt in a row gave me a little bit of mechanical anxiety 😂
He does that in all of his videos
I didn’t notice 😅
Why would you start an engine when the seller told him all the issues valves, push rods etc.
Only a moron would do that…imagine all the damage that could be done
@@slider1956 it’s not like he was trying to start your motorized walker Michael.
@@Steve-qn8gnexcuse me? I guess you don’t know much about mechanics & how things work
That is crazy, out of all the ATV's I've worked on and checked that woodruff key to verify if it sheared. I have never actually seen one sheared. This is great to know that it actually can happen.
Just bought a warrior with a sheered key. Pretty sure the crank is toast
I used to work on lawnmowers they quite often shear the keys
Top job there another cracking quad
FUEL, AIR, SPARK, COMPRESSION AND TIMING. This should be everyone's mantra when diagnosing small engine issues. Joe is a habitual timing overlooker.
Habitual for sure!!! And isnt much of a good diagnostic tech like some try to say. If he was he would diag the problem from bwginning. Not do his usual go down the list of shit until something sticks. Not much better than a parts cannon guy really. He can install parts but diaging the literal issue from the beginning he struggles with i think
Good fix.
I was shouting at the screen 'Check the timing!!' 'Check the timing!!'
'Sometimes', 'occasionally', you just can't believe what a seller tells you! ...especially when the rocker bolt was finger tight. Ha.
Interesting find. So the valves backed off putting massive back pressure in the cylinder sheering off the key. It was compounding issues. Good find and fix.
That's exactly what I was thinking when I saw the push rod dangling. Lol. I find myself talking to the video like he can hear me. 😂😂
I do feel for the guy who sold it to you.
He obviously just got to the end of his tether with that machine and took a big loss to get rid of it.
Three tiny things he did wrong cost him a fortune.
No loctite, fuel screw too far out and the darn woodruff key.
If only he had addressed these he would have been golden. But it seems his frustrations with the quad made him not see these.
the frustration did make me not see these.
Wow I was pretty stumped on that refusal to fire too, especially after you found and resolved the loose rockers. I was wondering what else he could have left loose, and was just thinking stator too, but I was thinking about the pickups shifting out of position, NOT THE WHEEL! Amazing how the littlest thing can stop a machine in its tracks, but great job tracking that sucker down and getting her up and running again!
The timing was spot on, remember ya'll ran it till the flywheel shifted. No start city after that lots of cranking. Sounds very good. I would rather have it in 600 if I had a choice. Bigger pistons may have kicked back when he heard the noise.
I had a 600 for 14 years and put over 7,000 miles and almost 1,000 hours on it and the only thing I ever replaced was the water pump.
I really enjoy your videos, so I just subscribed for more. Growing up decades ago on a small, rural farm, we had to work on everything from lawn mowers, ATV's, trucks to tractors, so it is nice to see youth who actually know how to work on machines. Often, I tell young people today to learn a trade skill instead of going into very deep college debt and then not earning the salary they thought they would. Locally and now living in another state, it is near impossible to find anyone who knows to fix modern machines.
Joe you are the man. Keep up the great work. We are all enjoying and learning!
Simple fix for you but impossible for guys like me. Your knowledge on these makes my head spin great 👍 job figuring it out 💪
One hint the way it was turning over with the hump in the cranking.
Nice job 👍
I appreciate your steady flow of content. It would be great if you could include cost of parts and your total profit once the ATVs are fixed and sold.
he aint telln the irs that lol
Mechanics 101: the smallest parts make the biggest difference. Good job!
It was a run around from here, I was going down every rabbit hole with you. I had no thoughts then your mind again came up with the theory of operation oh boy. Congratulations. 😊😊😊😊
Wow good job Joe ! You have come a long way since I started watching the channel.
Excellent troubleshooting, Joe! I am looking forward to seeing you take that thing for a ride
Great job , just to add , unhook exhaust and try to start , some one may have put a rag in it , mud daubers, etc , ask how I know , lol. Easy way to check push rods , roll them on the floor , work bench , the flatter the better. Great content!
i never doubted you, i knew you would figure it out, great fix man!
After all the usual checks it's perseverance that pays off that finds the problem. Thanks for the lesson.
Great video. I love learning while you diagnos the problem. $2 dollar part $2 million brain!
Did you say the part in the box had an aftermarket ding on it? Ha you're the BEST mechanic Joe
Another awesome job! It is just a matter of testing components in any type of combustion motor. Most people don't want to go thru the motions.
Somebody has a hankering for quads. Love the channel, always a learning moment. Keep up the hard work, Have newer Polaris - like Toro - gone to sealed engines where you can not work on them?
I just got a 2004 600! Had all kinds of issues but it’s running great now.
I had an 04 sportsman 600 I bought new. Great quad. Never any issues with it. When you are in 4x4 and go in reverse you only get rear wheel drive unless you push and hold over ride button. This will engage the front wheels while in reverse but it will engage rev limiter at part throttle. I assume that is what that set of contacts in throttle are for.
The contacts in the throttle is for when the carb cable gets stuck wide open, so it then shuts down the motor (no spark)
Nice job dude! I have been stumped by an old chainsaw I am rebuilding, it has good spark, compression and I’ve rebuilt carb 3x, gonna check the timing after watching this.
I raced motocross back in the early to mid 70’s. At 68 I would love to try it again! Thanks!!!
Awesome job of troubleshooting an unusual failure! Looks like you scored on this one.
Those purple camo Polaris 4X4, own one myself, and you would have thought they would have seen how they would weather and change from brown camo to purple. Good thing I live in Viking territory can say it's Viking Purple. mine has been a rock, if you keep the rad clean so they dont overheat, they are a pretty good machine. SO easy to put a temp gauge on them.
This is why it pays off to pay attention to the little things. They can ruin the entire project. Great find. Makes sense why it sounded so rough cranking.
Awesome video! Great job finding the problem!
That’s great diagnostic info for Polaris owners. Thanks really enjoyed that
Good job the woodruff key was the problem, ive had 2 changed them on my Briggs and Stratton lawnmower
Always recheck what others say they do, I’ve have found this many times with power equipment.
Great job. Double check torque on all critical bolts. You are very handy! Well done.
What a result joe quids in now mate this is going to clean up really well look forward to the follow up 👍👌🔧🔧🔧😀😀
Never ever trust or listen to what someone has said they have done cause doesn’t mean the have checked it properly or done it properly,
Best rule is too always start where you feel comfortable and do you what you would do if you just had a machine fail..
Great vids, listen too your gut not someone else’s
Joe congradulations in finding this one! My hat's off to you. Maybe you may want to dig up that Yamaha dirt-bike and check out the flywheel key on it too. 😊😊
Your definitely good at what you do man seems like you can fix anything with a engine
Good job chasing that one down!! But we ate going to have to work on your Victory Dance, lol. Love all your vids
That was one nice find glad you got it running
Siphon out crank case oil and run some cheap oil in it a couple times to rule out head gasket. Also perform leak down test and listen by crankcase oil check fitting.
I'm sure I'm not the 1st to acknowledge as we his audience sees it everytime Joe goes at one of these puzzles with sleuth like genius. It's to me like Joe is THE Sherlock Holmes of engine repair, size not always the (Woodruff) 'key' as today we did see.
I got a Warrior 350 he kept bump starting because the one way starting gear was out and he didn't replace it. So when I got it and replaced it shortly after the woodruff key broke I know that quad can't be bumped started but just thought I'd throw that out there too. They are important and can break easy plus cause complete loss of spark or intermittent. Good score as always buddy!
I have a bike that I almost gave up on...A TW125 that I got second hand. It starts soo easy when bump started. I couldn't have figured this out. I bought a new starter motor, new carburretor. I cant wait for the weekend to check out the woodruff
Hope it is whats wrong buddy!@@theshirehighlander7292
I’ve learnt so much from you Joe! Awsome video
Watched this front to back, you have a serious skill/talent! Subscribed after seeing that!
you need to make a list and stick it to the garage wall of all the easy checks to do first when a bike wont start,will save you a lot of time,as sometimes we forget the simple easy fixes.well done nice score.
Father was a Machainic, and always told me to keep it simple stupid then work up to the hard things. It works 80% of the time fixing things.
Good job.....good job in filming and not making no nausea....like the beeping in the background....sounds like someone working...got 2007 450 working on....thanks..
Joe u can get a box of woodruff keys from harbor freight Insted of ordering I use them all the time alot cheaper u get a box of em
You know never to trust somebody else's mechanical work. Always reject their work. It runs great!👍
I just love these videos thank you!
Just curious is this your side hustle or your full time gig bike repairs?
The birds in the background are so relaxing! LOL!
Good find Joe, should be a nice riding unit.
Very nice work! Great video!👍🏻👍🏻
You lucked out on that one great fine thoes old polaris where the best ones polaris made i sold my 2004 sportsman with 18000 km on it and bought a new 570 and had nothing but problems
Good job......it really pays to stick at it!
Nice work and patience...Now take that thing for a Beating!
Should we now call you Detective Lt. Columbo? LOL Great work!
This was a particularly fun one. Thanks.
Amazing how fast the sun turns those plastics purple. Our quads in the military, in the desert were the worst for it.
You stated that the last owner checked timing. You may want to confirm that the cam timing wasn't set based off the moved flywheel. Also, you your comments at 17:40.. Polaris, the MTD of motorsports. They didn't take the time to make a proper wiring harness until the mid 2000s.. automotive style bendix... anything to shave off a few bucks.
Love it! Wish I had your mechanical knowledge!
He can really fix anything….great buy!
It definitely seemed like a fuel issue when you’re trying to start it. like I said in my other comment I’m surprised you didn’t check the valves. but like I always say you’re a great mechanic you know more than I do. Lol…..
Listening to you try to start it you could hear it firing and stalling the starter because the spark was timed far too early.
Good work pal, not much beats you, only the ones you burry!!😂😂👍👍 but really, great results!👍
This was a great video. I like a great deals that work out. Not everyone can do that.😊😊
I just had the same thing happen on a Yamaha Grizzly 660, no spark and sure enough woodruff key was sheared off. Just got lucky it didn’t ruin the crank
Awesome diagnosis steps and great description on procedures and steps you take but why switch the 4x4 switch back and forth while trying to start?
Really enjoy watching your accountant.
I have learned a lot.
Crank it over about 50 more times should help 😂
I had the same carb issue on my golf cart, the previous owner hooked the starter generator up backwards, which caused it to blow gas, not suck it in!
I wish I had your knowledge in mechanics, every time I have a mechanical issue on a bike I think "what would 2vintage do in this situation? 🤔"
O joe I wanted to see it being ridden 🙈🤣🤣 until next time 😎👊❤️🇬🇧
When you are good, yer just good! Respect!
Check the carb vent hose for blockage. Spider web or mud. If you can't blow through the vent hose hose abandon the factory one and run a new one. The end of the vent hose should be up in between the handle bat's at the highest point.
Nice find and fix👍👍👍
I love your channel but i never see can-ams on here i would love to see you do a canadian made quad lol keep up the great videos.....from ONTARIO CANADA
Great job Sherlock. Those keys are pretty tough. I wonder what led to it shearing like that.
that loose rocker/rod coming off cause a lot of unwanted pressure. my thoughts anyway.
I have an 06 700 efi sportsman and have had my share of frustration with it
I’d love to see the business side of this! Break down of numbers!
nice video once again joe never taught that could be that damn key !
Nice work Joe, another one for the books.
You just can't trust anything anyone selling something says... Glad you got it fixed, and should be able to turn a good profit on it.
Excellent troubleshooting
You love to exercise starter motors I was half expecting smoke to appear 😮
Great job dude!
“The pushrods might belong being bent” 😂
do you have to disable the fuel pump somehow when testing the plug spark? does the fuel still squirt in when cranking?
If you use a impact rents to tighten the nut on the flywheel that can share that wood drift key off, so always tighten it With a wrench.
And torque despects.
Job well done young fallow. I'm proud of ya.
Awesome video bud 😊
I’m sure that’s what’s wrong with mine lol
Gonna check tomorrow