Jessie // Do you know some Browser available to use with Snow Leopard in order to have the OS Installed ? The problem is Snow Leopard is the best Mac OS X System but I cannot use it because there is not any available browser working properly with this system . I have tried many of them and they are not working at all !! Any solution about this please ???? Thanks
I watched a handful of videos before this that were WAY too much information. This presentation is the most straightforward and to the point while still offering the necessary information. Thank you.
Jessie...15:17 literally saved me from throwing my cMP into the Chesapeake Bay! I have been wracking my brains trying to get the Hardware Acceleration to work on this cMP. I gave up on my old Nvidia Quadros and upgraded to an AMC Radeon (Pixlas Mod) 6900XT and while faster and stronger, still, no HWA for H264, but yes for HEVC. And I could never get my DRM content to play, so I lived with it for a very long time. The last several hours I played with the new OCLP and tried some settings, even adjusted my spoof level to none and bricked my installation. I had to start all over. So after getting back up with Monterey 12.6.6, I started looking into Martin Lo's OCP to solve this issue. and sure enough, nothing worked. Nothing against them, I was trying to "cross pollinate" MLOCP with OCLP. It just doesn't work. After leaving the Mac Rumor forums, I'd just about given up for the night. I watched a great video from Joerg Hennignes of Open Core, and his great great videos on using MLOCP, and I was preparing to do a full MLOCP, already missing my wonderful experience with the OCLP, and then...I saw this guide up next on the YT queue Jessie's Flying for Unsupported Macs with Monterey & Ventura - Ultimate Tutorial and I landed on 15:17. It was too good to be true. I said, well, why not. I had just given up for the night, but rebooted my cMP, and tried 'Revert Root Patches'. Well, wouldn't you know it. It worked!!! I now have H264 and HEVC Hardware Acceleration and FINALLY DRM content that actually works! So Jessie, keep flying, my friend! Thank you very much for your work and making my night, and my work day tomorrow, even better! All the best to you and yours! God Bless! ~ MJ
This is an important video, and I thank you for it, but I do need make one correction. If I understood you correctly, you said that RAM cannot be upgraded on a 2010 Mac mini. Actually there is socketed RAM on all Mac minis, other than the 2014 and the M1. Specifically with the 2010 through 2012 Minis, the upgrade is very easy, and the machines can address as much as 16 GB.
You’re right, I was not clear enough in my video: Apple didn’t plan that you change the RAM and it needs a little bit of technical knowledge, but it is possible!
For a few months i installed Monterey with OCLP on my 2010 iMac 27 inch. There were a few programs that didn’t work. Maps, garageband, Memoji’s and a few other things did not work. Now i installed an already flashed k2100m 2gb videocard and had troubles again. After listening here to your tip about changing the videocard in the macPro and the option ‘revert the post install root patch’ my problem was solved. Just did that and than did the install root patch over and everything is fully working. After that i installed Ventura and it works flawlessly. Thank you very much again for your tips.❤
Thank you to the Hackintosh developers and the Hackintosh community for making this possible over the years. Opencore was first developed for Hackintosh. Later for real Macs, too. Without Hackintosh on Intel PC and AMD PC - no Opencore. This is the state of affairs! Best regards from my Hackintosh
I’ve been watching your channel for a while now. Yesterday I finally upgraded my Mac Pro 5,1 from Mojave (RX580) to Monterey with OCLP 1.2.1 and it was a joy. Took quite some time but all went well. Thank you so much for the detailed guides, and great advices on the channel 🙏💪🔥
Hi Jessie, great video! I have 3 questions for you (sorry for the length, but I would like to understand well): I have a Mac pro 5.1 (mid 2010) with Mojave on ssd disk named “PRINCIPLE” and a Sapphire RX580 Nitro+ 4Gb (not flashed, so without boot screen). I installed a new ssd DISK named “SECOND” into the Mac (cleaned and inizialized as Mac Os journaled, where I want to install Monterey). Then I have a 16Gb pendrive (chapter 3 of your video) Here’s my questions: 1) when the pendrive creation is finished, do I have to install the OpenCore bootloader into the pendrive OR into the ssd disk named “SECOND”? Because I think that, if I install into the pendrive, then I have to keep inserted forever... 2) Then I’ll proceed to Build and install OpenCore on ssd disk “SECOND” (chapter 2 of your video). Then instead of rebooting the system, I would shut it down, remove the system hard disk “PRINCIPLE” (so only the "SECOND" disk and the pendrive would remain connected) and boot the system WITHOUT pressing ALT. Do you think this would work, considering that with my video card I can't see the boot "? 3) If everything works, can I create a Time Machine Image so I can recovery it (in the future) without repeating the whole procedure all over again? Thank you very much!
Install the OpenCore onto the USB and boot from it. After installing macOS from the USB onto SECOND you just start the legacy patcher again and install it onto the SECOND, then you don’t need the USB for booting anymore. When you only boot with USB and empty SSD, it should boot OpenCore from USB automatically… Time Machine Backups will work, but make sure you always update OpenCore before updating macOs
This is a n excellent guide. Thank you for taking the time to make it insightful but pretty simple for beginners. EVERYONE who needs to install an OS on an unsupported Mac should watch this. Waiting on news to see how the guys hopefully find a workaround for Ventura and the cheesegrater. and YES YES YES a live session will be awesome
This is THE BEST video so far I've seen around this topic (and I've seen plenty, gone into the rabbit hole of mac forums). ALL my questions and doubts were answered, like if you were reading my mind! 🤯. The only question I would have is sometimes when I'm on the bootloader menu and click on EFI, it doesn't "enter" to the "sub-menu" where the installer is, it just shows again the whole bootloader menu. Any idea in what would be happening? I have saved this video already and FOR SURE will come back again and use it as my Bible. Again, THANKS SO MUCH for putting this video!! 🙌🏼
Thank you for your kind words - that means a lot to me! Sharing is appreciated ;-) But I never heard about your error that OpenCore doesn't load when you click on EFI Boot. Maybe do a NRAM reset and see if that happens again...
@@JessiesFlying I did all the process as you describe in this video, and after weeks (literally) of searching everywhere, trying everything, now my Mac Pro 5.1 is running the latest version of Monterey! 🙌🏼 Everything's working perfectly (so far). Just two quick questions. I checked on System Report that SIP is disabled (I used the "lowered" option when creating the boot as you mentioned), so my question is if I should enable it back and if I should do it on terminal on recovery mode or if there's a way to do it through OCLP? Another quick question, do you know why if I have two monitors connected to a Radeon RX 560 (DVI & HDMI) I can't see the boot loader menu, but if I have just one connected (DVI) I can see it? 🤔 Thanks again for everything! I'm following you know for your brilliantly simple but powerful advice!
@@javmb you have to enable SIP in the settings of the OpenCore Legacy patcher and reinstall it to your boot disk, otherwise if you enable it via terminal it will automatically being disabled next boot again. When your Mac boots try pressing arrow left and right, this should disable the automatic selection of your macOS and show the OpenCore Boot selector (it’s normally just because it waits only 1 second and your screen doesn’t show it). 👍🚀
I struggled to update or upgrade my iMac for many many years because of Apple's obsoletism. Now this is the real ultimate tutorial that will make me stand on, my two feet and get into D.I.Y t and "beat up" Apple!!! Thanks.
I installed Monterey on a 2011 21.5 iMac two days ago and I'm a first timer Mac user and I'm impressed, if I would try to install win10 or 11 on a 10 year old pc that wouldn't even boot😆 I do a lot off CAD in work and I do a lot of it home as well for 3D printing so I needed a "new" all in one computer in my garage that could handle it and the iMac was so cheap that I thought why not test it and so far it have handle everything very well☺️ I do most off my Cads on my new iPad but it have always bean a hassle to get the files to the pc for slicing but not now☺️
@@JessiesFlying yeah,I don't know why it took so long to get a Mac😂 I've bean using windows since win3.11😆 I have "everything" els from apple so😆 but shouldn't the iMac snap up if I play a song or so on my iPhone like my iPad dose?🤔 Apple Music? Apple TV+ doesn't work but I guess it's because I have the ATI 6750m gpu
So delighted to come across this channel. I have been stuck on the floor with my 5,1 Mac Pro trying to get it to start. Now I know why I could not do it. Great channel.
Hey I was asking about since I have upgraded to Monterey or bigsur or Catalina my wifi card doesn’t work I mean it works but it doesn’t connect to any networks and when I try to connect to any network it says it was unable to I was using macOS Monterey 12.2 my Mac is a mid 2009 MacBook Pro and an early 2009 iMac and for the oclp I always use the latest version any help would be appreciated
I want you to know. I was stuck on the upgrade. Your video was able to help me work around so I could upgrade Ventura with my late 2014 Macbook Pro 15". It seems to be working fine. many thanks!!
Help, please. I get the following error when attempting to create a Ventura installer for my Late 2014 iMac Retina 5k (MacOS 10.14.6). All goes without a hitch until it comes time to actually create the installer on my USB drive. Using OpenCore Legacy Patcher 1.3.0, Model: iMac15,1. ----- Error Failed to create macOS installer Output: Started erase on disk3 Unmounting disk Error: 2024-02-04 00:03:08.710 OpenCore- Patcher [4381:253710] Starting... Error: -69888: Couldn't unmount disk 2024-02-04 00:03:32.853 OpenCore-Patcher [4381:253710] Done ----- Any help appreciated.
Jesse ROXS. Yes I also jumped from Mojave to Monterey. Weird thing is I held down the option key down forever and never booted. Tried three times on restart and never boot the EFI boot screen. Then I just restarted without holding the option key and the darn EFI boot screet popped ??, anyhow thank you Jesse.
Thanks for share. Sucess update my 2015 macbook 12" I need newest macOS to install newest xcode then I can continue my office xcode project(run at M2 Air) at home
I just got a free 2008 Mac Pro that I’m trying to fix up. It has dual 4-core 2.8Ghz Intel Xeon CPUs. I’m sure it can run even sonoma using OLCP? I will be putting a RX 570 in it for metal support
Thank you so much, this works for my 2015 Macbook, I have Ventura working with almost no problems *knock on wood*. The only problem is that my toolbars and most text is WAY TOO SMALL. I put on some reading glasses and still it is tiny. I was able to make the folders on my desktop larger, but not the upper toolbar and the dock. Any way to fix this please? Or is my only option to go back to an older version of OS?
hey , thanks a lot , man, this tutorial really helped, after installing macOS ventura using open core , everything looks fine and working , except that my Mac is a little bit slow , specially when using internet /UA-cam ... the main reason for this update was to download Logic Pro x , because apple requires at least macOS ventura to use ... do you recommend using different macOS's , one supported and one not in my two SSDs ? if yes , how should I operate this ? thanks
Very helpful video I just installed Big Sur on my mid 2009 MacBook Pro using OCLP and it’s working great. Devs have done an amazing job How can I check if need to remove root patch to confirm whether or not my hardware acceleration is on? It had the Nvidia 9400M graphics card
Help!! My old apps such as Final cut pro, garage band, etc won't run on upgraded Os Ventura, even if I install newest versions, the system won't support them and they'll crash 😭😭😭😭
8:44 min ff. The whole physical (external) drive will be used. If the HD, usb or ssd has partitions on it - they will be gone and used for the OCLP. I am quite sure that I picked the right "disk0s2", "disk1s1" or what it says when you be prompted to pick the disk for the installer. Maybe I´am wrong and the first thing is a backup anyhow, oder so ähnlich.
Great channel! Just installed Monterey 12.6 through OCLP on a heavily upgraded Mac Pro 5,1. Looks quite good. But, there's one major issue you can follow in the internet. Since Monterey 12.3, support for 10gb ethernet seems to be changed somehow. So, e.g. the common AQC chip series and others no longer work on a Mac Pro 5,1. And OCLP currently doesn't seem to provide a solution for that. 10gbe is quite common on upgraded older Mac Pros. A video on this topic and your findings would be great!!!
Great video, thank you. Which of them would you suggest to install on a 2010 27 iMac with 16gb ram, Intel i7 2.93, M6100 graphics and ssd in order to not be sluggish?
great tutorial but I am missing a step I do not understand so = Off to purchase a used new model.......I cannot risk losing my music files and video files.... thanks for the help
Question: My Apple iMac 27 inch late 2013 (3.2 GHz / 16Gb memory) still has an old SATA 1Tb harddisk. I don't want to upgrade to SSD due to the fact that it is too much hassle to do. Does anyone know if the speed of the operation system remains the same when upgrading to macOS Monterey. I currently use macOS Catalina but a lot of apps demand macOS 12 to run.
I’ve tried a free install of Monterey 4 times now. I still get “ Installation cannot proceed because the installer is damaged. Redownload the installer and try again.” I have a Late 2013 MBP 15inch full specs. Please help. Don’t know what else’s to do
Hi Jessie Sorry for such a long message. I have an early 2009 Mac Pro 5,1 with 2 x 3.46 GHz 6-Core Intel Xeon, Sapphire Radeon RX580, 8gb GPU, MacOS Mojave version 10.14.6. I have tried upgrading Mojave to Monterey using OpenCore Legacy Patcher version 0.6.4. I had to remove the Sapphire Radeon RX580 and install the legacy Mac graphics card (NVidia GeForce GT120) 512 MB in order to see the ‘Boot screen’. OpenCore Legacy Patcher installed the drivers for the ‘legacy Mac graphics card’ during the upgrade/installation of Monterey. I can boot up and login to Monterey using the ‘legacy Mac graphics card’ however, when I shutdown the machine and install Sapphire Radeon RX580 card, It starts as normal showing the loading screen with apple logo and about 30% during the progress bar, the fans on the RX580 card stop and the screen goes black. If I shut down and install the ‘legacy Mac graphics card’ it then boots in to Monterey without any issues. I presume the issue is that ‘OpenCore Legacy Patcher’ has not installed the drives for the RX580 card and therefore is preventing graphic acceleration. In ‘OpenCore Legacy Patcher’ I click on ‘Revert Root Patches’, shutdown, install the RX580 card and booted, however, the screen still goes black. I have also tried to adjust the ‘SMBIOS Spoof Level’ to ‘Minimal’ shutdown, install the RX580 card and boot, however, the screen still goes black. When I revert to the ‘legacy Mac graphics card’ the ‘SMBIOS Spoof Level’ is back to Normal. I have also tried the reinstall / upgrade to Monterey several times. I think the ‘Revert Root Patches’ seems the logical thing to solve the problem, however, I am worried I am not doing something correctly. Are you able to describe the process in a little more detail as to how you ‘Revert Root Patches’ and at what stage you swop the ‘legacy Mac graphics card’ and install the RX580 card?
Ok, no problem 😂 try the following: Install Mac GPU and only the system harddisk and the boot USB drive. Make sure you keep ctrl pressed when selecting EFI Boot in apple boot selector to make it standard boot (logo changes to a circle). Start Monterey installer, delete harddisk and restarts. Make sure it automatically boots into OpenCore. Then shut it down and swap GPU. Then it should automatically boot into OpenCore again, but with RX580. Then install Monterey…. 👍
@@JessiesFlying Thanks Jessie. In the end, I installed 'RefindPlus Boot Manager' which allowed me to boot into the OpenCore Patcher USB with the RX580 card and then install Monterey. All works fine.
Hello Jessie, i just install Mac OS Sonoma 14,4,1 on my iMax 27 inch 2011 and it's running nice. However i did update my Final Cut Pro to 10,7,1 but it refuse to open ! What can i do ? uninstall and reinstall ? Thanks for your answer.
Hi, first of all I would like to thank you for the many tips and good instructions. I tried to bring Monterey to my Mac Pro 5.1 (mid 2012), 3.33GHz 6-core Intel Xeon with a GeForce GTX 680 4G with a clean install from a USB stick. The installation is successful. Monterey can be completely set up. The BootEFI is also installed on the new partition, but Monterey cannot be accessed again after the restart. The Prohibitary Circle appears. Do you have a rough idea where the error could be? Most of the time it’s the man in front of the screen;-) Thank you very much in advance. Rai
I created the USB Installer disk, disconnected all other drives accept my 1TB NVME SSD drive, start the install, but it keeps starting back at the "Install OS Monteray". Like it keeps starting over. It doesn't show up like I see in the video. It's not doing the subsequent restart & installs to complete the installation 😢
Great video, but I can’t get the boot picker so I can do the efi boot. I have tried with every key combination I could find, never happened. Any ideas thanks. Mine has ssd and 16 ram upgrades on Catalina
Hi Jessie - I’m running Catalina on my MacPro 2010 5,1 using Dosdude Patcher. If I want to upgrade to Monterey using OpenCore Legacy Patcher will I have to start from scratch and erase the NVMExpress drive and then install OpenCore?
the OpenCore devs recommend not to upgrade a (dosdude) patched macOS, but you can try. I would start from scratch with a new SSD and keep the old one for recovery / backup reasons...
I'm running a Mac Pro 5.1 with Mojave installed. sapphire RX580(no boot screen). I'm planning to install Monterrey, should I swap my rx580 to the original graphics card before starting the procedure with open core?
Hi, thanks a lot for this tutorials, they helped me a lot to get some more live out of my 5.1. I still have a problem. Apps do not seem to be able to ask for privacy permissions like microphone, camera, etc... is any option on the patcher to solve that?
@@JessiesFlying It's nice, but on my new macs I get virus warnings, some glicths on the profile picture on the login screen (on all macs) How can I completely remove this? Or is it too late now? In my new m1 macbook pro, although I don't have an application called mcafee on my computer, the system started sending virus notifications with the prefereences icon! I don't recommend it to anyone. If you're going to install it, I suggest you get a new Apple ID that you'll just use for it.
@@neosupperolddesigner I never had any problems or warnings about viruses. Unfortunately you cannot go back, but you can do recovery to an older macOS (with wiping harddisk first)…
Hi, congratulations for the tutorials, very clear and well done. I have a question to ask. I have successfully installed Monterey on a Mac Pro 5.1 2010 with its original card (GT 120), and then ask how can I connect multiple monitors to the mac? I tried with a Radeon Pulse 580 but it is not compatible with Monterey. how to solve the problem? Thank you Ugo
Hello. I'm currently attempting to put Monterey on my mid 2010 17" macbook pro 6,1. The OS currently on there is 10.6.8. The latest OpenCore Legacy patcher says I need at least 10.10. I've heard I should upgrade to El Capitan and then to High Sierra. Is this correct and if so, how do I do that?
You can use dosdude’s patcher for high Sierra - it can also download the macOS installer. But are you sure that 10.6.8 is latest official supported macOS? 🤔
3:45 Jessie it is possible to use my iMac 2010 27"" with Ventura with the OpenCore-Patcher 0.6.7? i have installed already and everything works fine BUT photoshop gives an Unknown GPU error: "Your graphics processor is not compatible" Metal unavailable and insufficient VRAM (0mb pf 1500 mb required) What do you recommend to do to solve this matter? Thanks a lot for your time, great channel!!!!
It's not Metal capable. the re-implemented graphic drivers can run Ventura, but all applications that need Metal support won't work. so either exchange GPU to a Metal capable one (is difficult or not possible depending on iMac version) or staying with older application versions that were still supported by High Sierra (latest macOS without Metal requirement)
@@JessiesFlying Thanks a lot for your time Jessie, It's very sad that Ventura is working fine in iMac 2010 but the only problem is with Adobe Photoshop 2023 and 2022, i haven't tried with 2021. I'm looking for a solution in adobe's forums. Thanks again for your reply.
Thanks for your great tutorial. I have an iMac (early 2009) running El Capitan. I tried to instal Monterey following your instructions (UNSUPPORTED MACs with Monterey & Ventura - Ultimate Tutorial!). First I installed Open Core. As the option for updating didn't show, a modified the SMBIOS as you said. Now I got the prohibitory symbol when I try to boot. I have already tried all combinations Key to access Recovery without success. What can I do? Do you think I lost my iMac?
Hello, have you tried to boot with NVRAM reset? Hold cntrl or alt+cmd+R+P while you power on. Wait for two chimes and then release the keys. As annoying as it is it works on my 5,1 cheese grater.
Hi Jessie, hab grad Probleme mit meinem MacBook Pro 15“ aus mid 2010, 1TB ssd & 8 GB RAM . Monterey lief gut! Dann HAB ich eine andere ssd eingebaut und hab versucht Ventura mit OCLP 530 zu installieren… hat im ersten Versuch leider nicht geklappt… dann hab ich die Originale Monterey ssd wieder eingebaut und sah , das die ssd nicht mehr gemountet wurde…ich musste alles löschen… auch die ssd mit Mojave wurde nicht mehr erkannt… Aber irgendwie hab ich es jetzt geschafft mit 2 Ventura boot sticks Ventura zu installieren… „JUHU SECHT DER GURU“… Loft jut Jessie !!! Falls ich bugs erkenne, teile ich diese dir mit. any news about iPads…? Mein iPad Air 2 nimmt nur IOS 15.x… brauche aber iOS 16 um ein 3D Tool zu installieren…
Danke für die Info, aber grundsätzlich werden erst Macs ab 2012 von Ventura mit OpenCore unterstützt. Bin gespannt auf dein Feedback! Zu iOS hab ich leider noch nichts…
Thanks a lot Jessie! I now can use my MacPro 4,1 (2009 ex 4,1) with OCLP 0.6.8 and Ventura 13.6 and it works perfect from a NVME-Drive and a Radeon RX 590 RX. USB-3-PCI is working, had to reset some rights on the other Harddrives, but bluetooth is working, Wifi is working, not a lot difference in speed coming from Catalina. Could also change the Icons in dock to my favorites and im really happy. Never could use Handoff, Airdrop and now I can use all the features from my watch also. Thanks for all the good advice and also the boot-trick with my PC-GPU. 🧡🙏🙌
Hello, I have an Mac Pro early 2008 and If I do this, will my data and music software be deleted or I ll be able to use everything as I use now on El Capitan??
At just before 10:00 on the video, I was able to select the upwards arrow for EFI Boot, then I saw the 'Install MacOS Monterey' icon, but no upwards arrow. It appeared for a second then there was a white circle with a backslash, then the Mac turned off.
Just wiggle left and right arrow during boot, this interrupts auto-selection of OpenCore. But make sure you keep OPTION pressed and select EFI Boot first!
@@JessiesFlying OK, so now I got further. I was able to select the 'Install macOS Monterey' icon. I then see the Apple logo, but instead of getting the screen where I can select to upgrade, it takes me straight to the first screen of agreeing to the license. Then on the second screen, it freezes when attempting to pair the bluetooth keyboard.
@@kieranwright6346 that’s weird, it should bring you directly to the recovery menu where you can select either harddisk utility or installing Monterey… 🤔
Thanks a lot you helped me install monterey on my mac pro 2012 without the official mac display card,I'm just having the wifi problem and I spent hours trying to fix it with no luck,the open core patch twice method didn't work I can see the wifi is on and when try to join manually and enter the ssid and password it also refuses to connect . I tried every think so I would be gratefull for any advice and thanks again
@@JessiesFlying Thanks a lot for the reply , I'm using the default broadcom module that came with my 5.1 mid 2012 . I don't know if this info is usefull but the bluetooth is working fine
very helpful video! but i have problem. I install ventura to unsupported mac (mac mini) but the graphics are very slow. Is it possible to roll back with clean install of Monterey latest version? (I want to remove all settings from OpenCore Legacy too)
Thanks for the video, my question: with bootcamp / windows 7 installed, will it work or is there something additional to do for keeping the dual boot ? Mac Mini late 2014
Be careful, the OpenCore Legacy patcher always delete the whole EFI Partition and installs itself then afterwards. I have not tested it in combination with windows, check Dortania’s guide for details
I have a late 2013 MacBook Pro that’s currently running the most current (unsupported) version of Monterey, and in the system settings updates it’s showing and update for the current version of MacOS Ventura. Can I upgrade to Ventura that way? What will happen if I click update to Ventura from the unsupported version of Monterey? Or do I need to start the process all over again and upgrade to Ventura thru Open Core Legacy with a usb. Also, is there a way to install Ventura without deleting all of my files and content? Like can I just update to it? Or do I need to do a fresh install and wipe the whole hard drive?
What if i am outside of tha mac (not signed in because i just bought it 2nd hand and was factory reset ,2015 imac) not accepting bootable usb ahowing up but not installing at all
Am trying to connect to smart tv The cable I used was “1 side thunderbolt &the other side is hdmi” not detected. Is there any process that I need to activate thunderbolt drive or …
I saw little bit old this great video didn’t reply to me. I stuck in the middle since once I updated to Ventura, I don’t see OS X Yosemite which he follows in the step. 🙏 again
Hello. i want to upgrade my 2012 mac pro to Monterey but i have a problem in that my restart doesn't work . Can i just shut it down and back on at the restart points?
Hi Jessie. Great Video. I have a MacPro 2012 - 5.1 with a Saphire graphics card and Mojave. Therefore I can not see the Apple boot selector. If I now reinstall my original Apple graphics card I can see the boot selector and determine the boot drive, but I don't understand how I should then install Monterey, since this again requires the Saphire graphics card like Mojave. Mojave won't boot at all without the Saphire, so I can't use the software update feature either. What can I do now to install Monterey over Mojave since I don't want to reinstall all my programs? Kind regards Thomas
Moin, einfach im apple boot selector EFI Boot auswählen und STRG gedruckt halten (das Logo wird zu einem Kreis) und damit als Standard-Boot-Option. Dann einfach mit der RX580 updaten, es sollte jetzt immer erst OpenCore geladen werden… 👍 Big Sur oder Monterey kann man aber auch mit der alten Grafikkarte installieren, da ist keine Abfrage drin, nur das Setup ist ohne Metal sehr langsam. Nach der Installation einfach die Grafikkarte tauschen…
There are a few things I don't understand here. You gave us links to websites that have that software but they are only for windows. I'm running a MacBook Pro (Mid 2012). Did I overlook something? And then the document that you put a link to in your description says its for 10.14 and above. I'm running High Sierra 10.13.6. So I'm confused. I don't know what to do. Thank you for any help you can give!
Thank you so very much. Because of your videos on how to install Mac OS Monterey on my old 2010 Mac Pro, I have been able to resurrect that old beast and keep using it. It has been my favorite computer for a long time, and I missed it when I was forced to upgrade my OS by some 3rd party app developer. The videos are wonderful. Thanks again!! 👍
Mac 5,1 running Mojave, sapphire Radeon RX 580 8GB graphics card 48 Gb RAM. Can I use this method to go straight to Monterey or do I have to step via Catalina etc?
Also the problem with the display port on NVidea metal cards (MacPro 5.1) which stops the picture put through after going to sleep and doesn’t come back when waken up? The patcher doesn’t solve this problem.
I have a Late 2014 iMac with a 27 inch Retina Display. After installing macOS Ventura, it doesn't recognize my built-in 5k display and does not show the Scaled Display Resolutions that I use (1600 X 900). How do I get macOS Ventura to recognize my Retina Display?
@@JessiesFlying tried that. It shows everything enabled. Watching the gpu usage while working in premiere shows little to no gpu usage. Radeon rx580 in 5,1 Mac w/ big sur.
Hi Jessie thanks for all your videos man, they have a lot of great information. I have open core running Big Sur 11.6 for over a year now on a SSD drive, the Open Core is on a USB I never installed the Open Core on the drive is that a problem? Should I put the Open Core on the drive instead of the USB? Using your tutorials it runs great. Bluetooth don’t work for me in big sur but wifi does. Can I upgrade to Monterey or Venture from my Big Sur drive? I don’t have another spare drive I want to upgrade my big Sur OS drive with open core,I think I want to upgrade to Venture is there any issues I should be aware of if I upgrade with my 5.1. Does Ethernet work in Venture? How difficult is it to upgrade from Big Sur OSX to Venture in Open Core? Can I even do it? My set up is 5.1 12-Core RX 580 gpu running Big Sur I am up grading my Wifi and Bluetooth to 4.0 I am wondering do I need a new Wifi and Bluetooth in the new OSX Venture? This is what I purchased Mac Pro 2010-2012 (5,1) - Apple Broadcom BCM94360CD - 802.11 a/b/g/n/ac with Bluetooth 4.0 is this okay for Venture? I have a 2.0 USB hub because in a newer video you mention that I might need a USB hub to install Venture is this correct. So I plug the keyboard into to USB hub and it should be okay? Any help would be appreciated.
Hello, I would like you to make a video explaining how to install Windows 10 on a Mac Pro 5.1 through Ooen Core Legacy Patcher. Greetings and thanks for sharing your work.
Thank you, I have tried several times following the thread to which the official page refers and I have not been able to do it, I imagine that there will be many people to whom the same thing has happened.
This was very helpful. I do have a question. I now have Monterey running on my old 2013 Mac which I wiped first and I can restart it with Monterey opening but I don't see the Opencore anywhere on my computer or even applications. I've tried to add it again but it restarts without showing me the EFI as an option, only the main hard drive. Should I be concerned?
It has just a short time to show the options, just wiggle left and right buttons on the keyboard during boot to prevent it automatically going on and you will see the OpenCore menu 👍
I have a 2013 14,1 iMac. When I select the open core from the boot loader selection, I get a 🚫 symbol. And then the Mac shuts off. The iMac has had a factory reset and it is currently running Yosemite. It is journaled. I don't know what I am doing wrong
I would recommend updating it as high as officially possible (at least High Sierra) to get all firmware updates done. Yosemite might be too old for OpenCore🤔 Did you try NVRAM reset?
@@JessiesFlying Thank you. So you are suggesting that I start with High Sierra and move up from there? Yes, I performed a NVRAM reset. The iMac was unable to see the links to the "Assets" on GitHub so I airdropped the link from my MacBook Air. (I didn't have a flashdrive on hand.)
I did everything you told me to do, to install the OpenCore legacy patcher. But at the end when restarted my mac and chose the opencore icon, after the Machintosh Hd. There was no update. : ( pls help!!!!!
Great video, Thank You very much. I have meet this problem when installing opencore on usb disk efi, i get an error ocurred! 0:188: execution error: Vplume on disk3s1 failed to mount. If you think the volume is supported but damaged, try the "readOnly" option (1) Please help
Thanks! Did you do the USB installer creation through OpenCore legacy patcher before as well? Maybe redo it and try again or try another usb port or another USB drive… 🤔 do you have administrator rights?
Thank You for your replay. I did usb installer creation through opencore legacy. But used disk utility to format usb before. Regarding administrator’s right I am using gui and not terminal, so I guess so because it is asking my administrator password to proceed.
Thank you so much for this ! I’m experencing some problems upgrading from catalina to monterey in my Mac Pro 5,1. After Booting from EFI the monterey installer starts until 13 minutes left than the maschine restart and if I choose MacOS installer the screen goes black with this symbol 🚫, if I choose monterey everething starts over again. Am I Missing something ? Of couse with the original graphic card. Any Idea? Thanks
I've gotten my 5,1 macpro update to Monterey using your tips. But now my legit version of Final Cut Pro isn't working and I can't seem to update it without updating OS to 13.4 or higher
You would need an older version of Final Cut maybe… check out the procedure here with my iMac 2011: Does an UNSUPPORTED macOS make any sense? - Part 1: Vintage MACs ua-cam.com/video/vr3ub4Qq2Ds/v-deo.html
Ah @ 14:21 there is the info on WIFI and Bluetooth connectivity I was hoping for. The Hashwell is a must for Ventura but not for Monterey then. MB pro 2012 not good but MB 2013 is good.
hello Jessie. I have a Mac book pro 2019 Intel Core I7, 16 GB memory with Ventura OS. I need to install Catalina on a volume or an external disk as I have an expensive software which will only work with Catalina. the OS is not letting me download the Catalina APP can I do it with a DMG file? help please.
@@JessiesFlying when I reboot and chose to install the OS Catalina the screen goes black and there is a block symbol on the screen…. I am not have any luck…
@@JessiesFlying by the way I just bought this Mac book pro, or is a refurbished machine and OS Ventura might have been the factory standard on this machine as it could have been one of the older machines left in stock after M1 started shipping. Would I still be able to run Mojave or Catalina on a disk partition or external disk?
I have followed all of the steps. First, changed the SMBIOS level to moderate. Next, select EFI boot, Select the drive, and then I receive the following. "A prohibitory symbol, which looks like a circle with a line or slash through it, means that your startup disk contains a Mac operating system, but it's not a version or build of macOS that your Mac can use." I currently have macOS High Sierra version 10.13.6. Please advise
@@JessiesFlying Do you think my Boot ROM Version: 138.0.0.0.0 is the problem? Hardware Overview: Model Name: Mac Pro Model Identifier: MacPro5,1 Processor Name: 6-Core Intel Xeon Processor Speed: 2.66 GHz Number of Processors: 2 Total Number of Cores: 12 L2 Cache (per Core): 256 KB L3 Cache (per Processor): 12 MB Memory: 64 GB Boot ROM Version: 138.0.0.0.0 SMC Version (system): 1.39f11 SMC Version (processor tray): 1.39f11 Serial Number (system): H01060MQGWR Serial Number (processor tray): J510101CHBH8B I have two graphics cards so I can see the boot screen. ATI Radeon HD 2600 XT: Chipset Model: ATI Radeon HD 2600 Type: GPU Bus: PCIe Slot: Slot-4 PCIe Lane Width: x4 VRAM (Dynamic, Max): 256 MB Vendor: AMD (0x1002) Device ID: 0x9588 Revision ID: 0x0000 ROM Revision: 113-B1480A-252 EFI Driver Version: 01.00.252 and Radeon RX 580: Chipset Model: Radeon RX 580 Type: GPU Bus: PCIe Slot: Slot-1 PCIe Lane Width: x16 VRAM (Dynamic, Max): 8192 MB Vendor: AMD (0x1002) Device ID: 0x67df Revision ID: 0x00e7 Metal: Supported, feature set macOS GPUFamily1 v3 Displays: Eight sticks Memory Slots: ECC: Enabled Upgradeable Memory: Yes DIMM 1: Size: 8 GB Type: DDR3 ECC Speed: 1333 MHz Status: OK Manufacturer: 0x857F Part Number: 0x463732314752363546393333334700000000 Serial Number: -
Hi Jessie, Great tutorial! My MacBookPro11,2 doesn't show the opencore patcher when installed, reboot and the alt key on. What do I do wrong?🤔 Thanks for your reply! Olivier
@@JessiesFlying I do see EFI Boot. I as not aware that was the selection to take. I took that selection, but I came in a old bootcamp Windows and not the opencore patcher. Can you advice me what to do next?
@@olivier1363 create a USB drive as in the video and then keep option pressed. There should be 2 EFI Boot options, take the one with the USB drive logo👍
![macOS Monterey on Unsupported Macs [2008-2015] OpenCore Legacy Patcher!!!](http://i.ytimg.com/vi/-huRykhjs6g/mqdefault.jpg)
Join my Discord for Questions & Answers: discord.gg/rAhpJNqaKS
Jessie // Do you know some Browser available to use with Snow Leopard in order to have the OS Installed ? The problem is Snow Leopard is the best Mac OS X System but I cannot use it because there is not any available browser working properly with this system . I have tried many of them and they are not working at all !! Any solution about this please ???? Thanks
@@Ganymede024 no idea unfortunately, did you ask on Discord?
I watched a handful of videos before this that were WAY too much information. This presentation is the most straightforward and to the point while still offering the necessary information. Thank you.
Thank you, you’re welcome! Sharing appreciated😬
Jessie...15:17 literally saved me from throwing my cMP into the Chesapeake Bay! I have been wracking my brains trying to get the Hardware Acceleration to work on this cMP. I gave up on my old Nvidia Quadros and upgraded to an AMC Radeon (Pixlas Mod) 6900XT and while faster and stronger, still, no HWA for H264, but yes for HEVC. And I could never get my DRM content to play, so I lived with it for a very long time. The last several hours I played with the new OCLP and tried some settings, even adjusted my spoof level to none and bricked my installation. I had to start all over. So after getting back up with Monterey 12.6.6, I started looking into Martin Lo's OCP to solve this issue. and sure enough, nothing worked. Nothing against them, I was trying to "cross pollinate" MLOCP with OCLP. It just doesn't work. After leaving the Mac Rumor forums, I'd just about given up for the night. I watched a great video from Joerg Hennignes of Open Core, and his great great videos on using MLOCP, and I was preparing to do a full MLOCP, already missing my wonderful experience with the OCLP, and then...I saw this guide up next on the YT queue Jessie's Flying for Unsupported Macs with Monterey & Ventura - Ultimate Tutorial and I landed on 15:17. It was too good to be true. I said, well, why not. I had just given up for the night, but rebooted my cMP, and tried 'Revert Root Patches'. Well, wouldn't you know it. It worked!!! I now have H264 and HEVC Hardware Acceleration and FINALLY DRM content that actually works! So Jessie, keep flying, my friend! Thank you very much for your work and making my night, and my work day tomorrow, even better! All the best to you and yours! God Bless! ~ MJ
Great to be able to help! I would really appreciate if you can advertise my video / channel on all your communities to help me grow 😊
This is an important video, and I thank you for it, but I do need make one correction. If I understood you correctly, you said that RAM cannot be upgraded on a 2010 Mac mini. Actually there is socketed RAM on all Mac minis, other than the 2014 and the M1. Specifically with the 2010 through 2012 Minis, the upgrade is very easy, and the machines can address as much as 16 GB.
You’re right, I was not clear enough in my video: Apple didn’t plan that you change the RAM and it needs a little bit of technical knowledge, but it is possible!
For a few months i installed Monterey with OCLP on my 2010 iMac 27 inch. There were a few programs that didn’t work. Maps, garageband, Memoji’s and a few other things did not work. Now i installed an already flashed k2100m 2gb videocard and had troubles again. After listening here to your tip about changing the videocard in the macPro and the option ‘revert the post install root patch’ my problem was solved. Just did that and than did the install root patch over and everything is fully working. After that i installed Ventura and it works flawlessly.
Thank you very much again for your tips.❤
Great to hear! That’s why I’m doing it! 🚀
Thank you to the Hackintosh developers and the Hackintosh community for making this possible over the years. Opencore was first developed for Hackintosh. Later for real Macs, too. Without Hackintosh on Intel PC and AMD PC - no Opencore. This is the state of affairs! Best regards from my Hackintosh
I’ve been watching your channel for a while now. Yesterday I finally upgraded my Mac Pro 5,1 from Mojave (RX580) to Monterey with OCLP 1.2.1 and it was a joy. Took quite some time but all went well.
Thank you so much for the detailed guides, and great advices on the channel 🙏💪🔥
Thx, you’re welcome!
Hi Jessie, great video! I have 3 questions for you (sorry for the length, but I would like to understand well):
I have a Mac pro 5.1 (mid 2010) with Mojave on ssd disk named “PRINCIPLE” and a Sapphire RX580 Nitro+ 4Gb (not flashed, so without boot screen). I installed a new ssd DISK named “SECOND” into the Mac (cleaned and inizialized as Mac Os journaled, where I want to install Monterey).
Then I have a 16Gb pendrive (chapter 3 of your video)
Here’s my questions:
1) when the pendrive creation is finished, do I have to install the OpenCore bootloader into the pendrive OR into the ssd disk named “SECOND”? Because I think that, if I install into the pendrive, then I have to keep inserted forever...
2) Then I’ll proceed to Build and install OpenCore on ssd disk “SECOND” (chapter 2 of your video). Then instead of rebooting the system, I would shut it down, remove the system hard disk “PRINCIPLE” (so only the "SECOND" disk and the pendrive would remain connected) and boot the system WITHOUT pressing ALT. Do you think this would work, considering that with my video card I can't see the boot "?
3) If everything works, can I create a Time Machine Image so I can recovery it (in the future) without repeating the whole procedure all over again?
Thank you very much!
Install the OpenCore onto the USB and boot from it. After installing macOS from the USB onto SECOND you just start the legacy patcher again and install it onto the SECOND, then you don’t need the USB for booting anymore. When you only boot with USB and empty SSD, it should boot OpenCore from USB automatically…
Time Machine Backups will work, but make sure you always update OpenCore before updating macOs
@@JessiesFlying Thanks bro!
I installed Monterey on my Macbook Pro mid 2009, after updating RAM and update to SSD. Works like a dream.
Great to hear! 👍
This is a n excellent guide. Thank you for taking the time to make it insightful but pretty simple for beginners. EVERYONE who needs to install an OS on an unsupported Mac should watch this. Waiting on news to see how the guys hopefully find a workaround for Ventura and the cheesegrater. and YES YES YES a live session will be awesome
We’ll see😬
Thanks Jessie I updated my MacBook Pro (Retina, 15-inch, Mid 2015)to ventura
Great! 👍
This is THE BEST video so far I've seen around this topic (and I've seen plenty, gone into the rabbit hole of mac forums). ALL my questions and doubts were answered, like if you were reading my mind! 🤯. The only question I would have is sometimes when I'm on the bootloader menu and click on EFI, it doesn't "enter" to the "sub-menu" where the installer is, it just shows again the whole bootloader menu. Any idea in what would be happening? I have saved this video already and FOR SURE will come back again and use it as my Bible. Again, THANKS SO MUCH for putting this video!! 🙌🏼
Thank you for your kind words - that means a lot to me! Sharing is appreciated ;-) But I never heard about your error that OpenCore doesn't load when you click on EFI Boot. Maybe do a NRAM reset and see if that happens again...
@@JessiesFlying I did all the process as you describe in this video, and after weeks (literally) of searching everywhere, trying everything, now my Mac Pro 5.1 is running the latest version of Monterey! 🙌🏼 Everything's working perfectly (so far). Just two quick questions. I checked on System Report that SIP is disabled (I used the "lowered" option when creating the boot as you mentioned), so my question is if I should enable it back and if I should do it on terminal on recovery mode or if there's a way to do it through OCLP?
Another quick question, do you know why if I have two monitors connected to a Radeon RX 560 (DVI & HDMI) I can't see the boot loader menu, but if I have just one connected (DVI) I can see it? 🤔
Thanks again for everything! I'm following you know for your brilliantly simple but powerful advice!
@@javmb you have to enable SIP in the settings of the OpenCore Legacy patcher and reinstall it to your boot disk, otherwise if you enable it via terminal it will automatically being disabled next boot again.
When your Mac boots try pressing arrow left and right, this should disable the automatic selection of your macOS and show the OpenCore Boot selector (it’s normally just because it waits only 1 second and your screen doesn’t show it). 👍🚀
I struggled to update or upgrade my iMac for many many years because of Apple's obsoletism. Now this is the real ultimate tutorial that will make me stand on, my two feet and get into D.I.Y t and "beat up" Apple!!! Thanks.
😬😈
I installed Monterey on a 2011 21.5 iMac two days ago and I'm a first timer Mac user and I'm impressed, if I would try to install win10 or 11 on a 10 year old pc that wouldn't even boot😆
I do a lot off CAD in work and I do a lot of it home as well for 3D printing so I needed a "new" all in one computer in my garage that could handle it and the iMac was so cheap that I thought why not test it and so far it have handle everything very well☺️ I do most off my Cads on my new iPad but it have always bean a hassle to get the files to the pc for slicing but not now☺️
Great to hear, bringing this old hardware to a use...!
@@JessiesFlying yeah,I don't know why it took so long to get a Mac😂 I've bean using windows since win3.11😆
I have "everything" els from apple so😆 but shouldn't the iMac snap up if I play a song or so on my iPhone like my iPad dose?🤔 Apple Music? Apple TV+ doesn't work but I guess it's because I have the ATI 6750m gpu
you have to search the forums for that, that is too specific for me....
do you see a decline in speed and performance?
@@makovitchkonda3960 just wait for today’s video😬
So delighted to come across this channel. I have been stuck on the floor with my 5,1 Mac Pro trying to get it to start. Now I know why I could not do it. Great channel.
thx!
Hey I was asking about since I have upgraded to Monterey or bigsur or Catalina my wifi card doesn’t work I mean it works but it doesn’t connect to any networks and when I try to connect to any network it says it was unable to I was using macOS Monterey 12.2 my Mac is a mid 2009 MacBook Pro and an early 2009 iMac and for the oclp I always use the latest version any help would be appreciated
looks like the WiFi is so old, you'd better buy a cheap supported USB WiFi stick and use this...
@@JessiesFlying aww :( yeah that’s what I did thought it was a me problem but thanks for the help
MacBook Pro (15 Zoll, Ende 2008), Monterey 12.6.1 (21G215): LAN and WiFi no problem. Never.
My Mac Mini 2011 (I7 2GHz) runs Ventura OK... its not fantastic but it runs not bad as a backup system. OCLP of course.
Congratulations on your channel, it’s neat, clear thoughts 💭 and very precise.
Thx! 😬
I want you to know. I was stuck on the upgrade. Your video was able to help me work around so I could upgrade Ventura with my late 2014 Macbook Pro 15". It seems to be working fine. many thanks!!
😊
Help, please. I get the following error when attempting to create a Ventura installer for my Late 2014 iMac Retina 5k (MacOS 10.14.6). All goes without a hitch until it comes time to actually create the installer on my USB drive. Using OpenCore Legacy Patcher 1.3.0, Model: iMac15,1.
-----
Error
Failed to create macOS installer
Output: Started erase on disk3
Unmounting disk
Error: 2024-02-04 00:03:08.710 OpenCore-
Patcher [4381:253710] Starting...
Error: -69888: Couldn't unmount disk
2024-02-04 00:03:32.853 OpenCore-Patcher [4381:253710] Done
-----
Any help appreciated.
Try a restart, a different USB port or a different USB drive
I have an RX 580 8gb Saffire with an Apple EFI flash. Will that work?
that should work without any problems...
Jesse ROXS. Yes I also jumped from Mojave to Monterey. Weird thing is I held down the option key down forever and never booted. Tried three times on restart and never boot the EFI boot screen. Then I just restarted without holding the option key and the darn EFI boot screet popped ??, anyhow thank you Jesse.
Thanks for share. Sucess update my 2015 macbook 12"
I need newest macOS to install newest xcode then I can continue my office xcode project(run at M2 Air) at home
Great to hear!
Hi dear thanks for this awesome ultimate explanation I have problem with Monterey the camera and mic doesn’t work at all with all Apps like
Hi, I already made a video for that: ua-cam.com/video/NZNW62-DfIE/v-deo.html 👍
@@JessiesFlying thanks for mentioning that
Thank-you. my 2010 ,21.5" was easy to upgrade ,...but on wake up, display is scrambled as soon as mouse is movedt
That’s weird, did you try to do root patch twice and then reboot?
Hi, I got a white circle with slash when reboot. It turns off after a few mins. Got Mac Pro Trashcan. How should I proceed?
It didn't boot from EFI Bott (OpenCore) so it shows that the macOS is not supported - make sure it boot OpenCore first, then the macOS ☝
Great video !!! , i have monterey installed with onecorey, how can I install venture on my MacBook Pro 2014?
Install latest OpenCore Legacy patcher 0.5.0 and do the upgrade 👍
I just got a free 2008 Mac Pro that I’m trying to fix up. It has dual 4-core 2.8Ghz Intel Xeon CPUs. I’m sure it can run even sonoma using OLCP? I will be putting a RX 570 in it for metal support
With a RX570 for sure 👍
Thank you so much, this works for my 2015 Macbook, I have Ventura working with almost no problems *knock on wood*. The only problem is that my toolbars and most text is WAY TOO SMALL. I put on some reading glasses and still it is tiny. I was able to make the folders on my desktop larger, but not the upper toolbar and the dock. Any way to fix this please? Or is my only option to go back to an older version of OS?
Did you install the "root patch" so that you have the correct graphic drivers?
@@JessiesFlying That fixed it! Thank you so much I feel like I have a brand new Macbook! =)
@@queenmarylady1 great! 😬
hey , thanks a lot , man, this tutorial really helped, after installing macOS ventura using open core , everything looks fine and working , except that my Mac is a little bit slow , specially when using internet /UA-cam ... the main reason for this update was to download Logic Pro x , because apple requires at least macOS ventura to use ... do you recommend using different macOS's , one supported and one not in my two SSDs ? if yes , how should I operate this ? thanks
You can install a different macOS onto a different SSD and just choose in the OpenCore which to boot... 👍
Very helpful video
I just installed Big Sur on my mid 2009 MacBook Pro using OCLP and it’s working great.
Devs have done an amazing job
How can I check if need to remove root patch to confirm whether or not my hardware acceleration is on?
It had the Nvidia 9400M graphics card
Check out my video for that (look for VideoProc - download link in description: ua-cam.com/video/1ndbt6evw54/v-deo.html
Help!! My old apps such as Final cut pro, garage band, etc won't run on upgraded Os Ventura, even if I install newest versions, the system won't support them and they'll crash 😭😭😭😭
Can you just update the apps through App Store?
8:44 min ff. The whole physical (external) drive will be used. If the HD, usb or ssd has partitions on it - they will be gone and used for the OCLP.
I am quite sure that I picked the right "disk0s2", "disk1s1" or what it says when you be prompted to pick the disk for the installer. Maybe I´am wrong and the first thing is a backup anyhow, oder so ähnlich.
Yes, the installer wipes the whole drive where it is installed on… 😖
Hi Jessie, thx fir your video. Unfortunatly it didn’t work for me, it wont show me the opencore. I have a rx570
Check this out: ua-cam.com/video/p0tOmD3QEow/v-deo.htmlsi=V8VuiOg23CeXAkOu
Great channel!
Just installed Monterey 12.6 through OCLP on a heavily upgraded Mac Pro 5,1. Looks quite good. But, there's one major issue you can follow in the internet. Since Monterey 12.3, support for 10gb ethernet seems to be changed somehow. So, e.g. the common AQC chip series and others no longer work on a Mac Pro 5,1. And OCLP currently doesn't seem to provide a solution for that. 10gbe is quite common on upgraded older Mac Pros. A video on this topic and your findings would be great!!!
I have to dig deeper into that, but I don’t have anything to test here…
I installed Mac OS ventura on my MacBook Pro (late 2011), but the mouse stopped, when selecting the location and languages.
The patcher is for 2012 and newer models, for older models there are no drivers yet…
Great video, thank you. Which of them would you suggest to install on a 2010 27 iMac with 16gb ram, Intel i7 2.93, M6100 graphics and ssd in order to not be sluggish?
I would recommend Big Sur
great tutorial but I am missing a step I do not understand so = Off to purchase a used new model.......I cannot risk losing my music files and video files....
thanks for the help
If you’re gonna buy a new (old) Mac you can transfer your data i.e. via TimeMachine
My iMac is using startup disk booting from a ssd drive. What changes in the Install must I make? Can you make a video on installing iMac only?
There is no difference between Mac models how to install OpenCore
Even tho i have done this a few times on different computers i always play this video. thank you for teaching me this skill.
You’re very welcome!
I have a 2010 Mac Pro …. I don’t know what graphics card to get that support metal? Can you help me with a list please
I recommend AMD Radeon RX580 or RX560, but the MacPro 208-2012 doesn't work with macOS 13 Ventura yet....
Question: My Apple iMac 27 inch late 2013 (3.2 GHz / 16Gb memory) still has an old SATA 1Tb harddisk. I don't want to upgrade to SSD due to the fact that it is too much hassle to do. Does anyone know if the speed of the operation system remains the same when upgrading to macOS Monterey. I currently use macOS Catalina but a lot of apps demand macOS 12 to run.
I’ve tried a free install of Monterey 4 times now. I still get “ Installation cannot proceed because the installer is damaged.
Redownload the installer and try again.” I have a Late 2013 MBP 15inch full specs. Please help. Don’t know what else’s to do
Try a different machine for downloading maybe… 🤔
Hi Jessie
Sorry for such a long message.
I have an early 2009 Mac Pro 5,1 with 2 x 3.46 GHz 6-Core Intel Xeon, Sapphire Radeon RX580, 8gb GPU, MacOS Mojave version 10.14.6.
I have tried upgrading Mojave to Monterey using OpenCore Legacy Patcher version 0.6.4.
I had to remove the Sapphire Radeon RX580 and install the legacy Mac graphics card (NVidia GeForce GT120) 512 MB in order to see the ‘Boot screen’.
OpenCore Legacy Patcher installed the drivers for the ‘legacy Mac graphics card’ during the upgrade/installation of Monterey.
I can boot up and login to Monterey using the ‘legacy Mac graphics card’ however, when I shutdown the machine and install Sapphire Radeon RX580 card, It starts as normal showing the loading screen with apple logo and about 30% during the progress bar, the fans on the RX580 card stop and the screen goes black.
If I shut down and install the ‘legacy Mac graphics card’ it then boots in to Monterey without any issues.
I presume the issue is that ‘OpenCore Legacy Patcher’ has not installed the drives for the RX580 card and therefore is preventing graphic acceleration.
In ‘OpenCore Legacy Patcher’ I click on ‘Revert Root Patches’, shutdown, install the RX580 card and booted, however, the screen still goes black.
I have also tried to adjust the ‘SMBIOS Spoof Level’ to ‘Minimal’ shutdown, install the RX580 card and boot, however, the screen still goes black. When I revert to the ‘legacy Mac graphics card’ the ‘SMBIOS Spoof Level’ is back to Normal.
I have also tried the reinstall / upgrade to Monterey several times.
I think the ‘Revert Root Patches’ seems the logical thing to solve the problem, however, I am worried I am not doing something correctly.
Are you able to describe the process in a little more detail as to how you ‘Revert Root Patches’ and at what stage you swop the ‘legacy Mac graphics card’ and install the RX580 card?
Ok, no problem 😂 try the following: Install Mac GPU and only the system harddisk and the boot USB drive. Make sure you keep ctrl pressed when selecting EFI Boot in apple boot selector to make it standard boot (logo changes to a circle). Start Monterey installer, delete harddisk and restarts. Make sure it automatically boots into OpenCore. Then shut it down and swap GPU. Then it should automatically boot into OpenCore again, but with RX580. Then install Monterey…. 👍
@@JessiesFlying Thanks Jessie. In the end, I installed 'RefindPlus Boot Manager' which allowed me to boot into the OpenCore Patcher USB with the RX580 card and then install Monterey. All works fine.
@@jamesdickinson2495 nice idea… 👊
Thank you for the time you put into helping the rest of us. I couldn’t have done it without your detailed explanation .
You’re very welcome ☺️
I’ve watched a lot of tutorials on how to install through opencore and this is by far the best tutorial. Good detail and thankyou.
Thank you so much! Sharing appreciated 😬
Hello Jessie,
i just install Mac OS Sonoma 14,4,1 on my iMax 27 inch 2011 and it's running nice. However i did update my Final Cut Pro to 10,7,1 but it refuse to open ! What can i do ? uninstall and reinstall ?
Thanks for your answer.
I can imagine that it doesn’t open due to graphic driver issues… did it work with older versions of Sonoma?
The Mac Mini 2014 Ventura is running smooth it just took forever to download
Thx for the info!
No problem
My Macbook Pro late 2011 (8.1) does not support the installation of macOS Monterey
My MacBook Pro 2012 runs Ventura, so Monterey should be possible with OpenCore legacy patcher… 🤔
Hi, first of all I would like to thank you for the many tips and good instructions. I tried to bring Monterey to my Mac Pro 5.1 (mid 2012), 3.33GHz 6-core Intel Xeon with a GeForce GTX 680 4G with a clean install from a USB stick. The installation is successful. Monterey can be completely set up. The BootEFI is also installed on the new partition, but Monterey cannot be accessed again after the restart. The Prohibitary Circle appears. Do you have a rough idea where the error could be? Most of the time it’s the man in front of the screen;-)
Thank you very much in advance. Rai
You need to boot EFI boot from your harddisk, it seems it tries to boot Monterey directly
I created the USB Installer disk, disconnected all other drives accept my 1TB NVME SSD drive, start the install, but it keeps starting back at the "Install OS Monteray". Like it keeps starting over. It doesn't show up like I see in the video. It's not doing the subsequent restart & installs to complete the installation 😢
So how many restarts did it do? It may take 4-5 restarts… and try NVRAM reset. It also might be the NVMe, maybe try installing on a SSD…?
Amazing tutorial, just what I needed to give my 2010 Mac Pro a new lease of life. Thanks for the great work !
Thx!
Should not have started with the usb drive? Why on the video the sequence is not like this? I got confused
Either or! Do the update from macOS or use a usb drive…
Great video, but I can’t get the boot picker so I can do the efi boot. I have tried with every key combination I could find, never happened. Any ideas thanks. Mine has ssd and 16 ram upgrades on Catalina
What Mac model do you use? Do you have a Bluetooth keyboard? Try a USB keyboard perhaps….
@@JessiesFlying Yes is bluetooth, 2013 Imac 21.5
Try USB keyboard and wiggling left and right arrow to stop automatic advance....
Can I update my opencore hackintosh Monterey to Ventura safely over Settings? Because, the Clover for example is not allowed do that.
Nope, Hackintosh is a totally different story and way to various as if I could give you advice…
Hi Jessie - I’m running Catalina on my MacPro 2010 5,1 using Dosdude Patcher. If I want to upgrade to Monterey using OpenCore Legacy Patcher will I have to start from scratch and erase the NVMExpress drive and then install OpenCore?
the OpenCore devs recommend not to upgrade a (dosdude) patched macOS, but you can try. I would start from scratch with a new SSD and keep the old one for recovery / backup reasons...
I'm running a Mac Pro 5.1 with Mojave installed. sapphire RX580(no boot screen). I'm planning to install Monterrey, should I swap my rx580 to the original graphics card before starting the procedure with open core?
It’s easier, but it also works this way:
ua-cam.com/video/p0tOmD3QEow/v-deo.html
I have run monterey on AMD Ryzen 5, and NVIDIA GT 1030 successfully but after an update to Ventura GPU not supporting any fix for this
I think for Hackintosh you need to consult OpenCore Team and check their tutorials…
Hi, thanks a lot for this tutorials, they helped me a lot to get some more live out of my 5.1. I still have a problem. Apps do not seem to be able to ask for privacy permissions like microphone, camera, etc... is any option on the patcher to solve that?
Not on macOS 13.3 or newer as SIP has to be disabled
How do I go back to my previous macOS?
You have to do a clean install as Apple has no „way back“… 😩
for chapter one:
I have 2012 macbook pro retina 8GB. Question on my mind Ventura or Monterey? Monterey is ok but what about Ventura?
My MacBook Pro 2012 (non-retina) runs fine with Ventura👍
@@JessiesFlying
It's nice, but on my new macs I get virus warnings, some glicths on the profile picture on the login screen (on all macs) How can I completely remove this? Or is it too late now?
In my new m1 macbook pro, although I don't have an application called mcafee on my computer, the system started sending virus notifications with the prefereences icon!
I don't recommend it to anyone. If you're going to install it, I suggest you get a new Apple ID that you'll just use for it.
@@neosupperolddesigner I never had any problems or warnings about viruses. Unfortunately you cannot go back, but you can do recovery to an older macOS (with wiping harddisk first)…
@@JessiesFlying what if i format the disk and reinstall it in catalina?
@@neosupperolddesigner should be no problem
Hi, congratulations for the tutorials, very clear and well done. I have a question to ask. I have successfully installed Monterey on a Mac Pro 5.1 2010 with its original card (GT 120), and then ask how can I connect multiple monitors to the mac? I tried with a Radeon Pulse 580 but it is not compatible with Monterey. how to solve the problem? Thank you
Ugo
Radeon RX580 is compatible, only apple boot selector is not visible (I myself use it). 👍 details here: ua-cam.com/video/mtN8zxGVNwQ/v-deo.html
Grazie
Hello. I'm currently attempting to put Monterey on my mid 2010 17" macbook pro 6,1. The OS currently on there is 10.6.8. The latest OpenCore Legacy patcher says I need at least 10.10. I've heard I should upgrade to El Capitan and then to High Sierra. Is this correct and if so, how do I do that?
You can use dosdude’s patcher for high Sierra - it can also download the macOS installer. But are you sure that 10.6.8 is latest official supported macOS? 🤔
@@JessiesFlying Got it sorted, all good. Thanks for your reply.
@@RockSchooled you’re welcome!
super easy instructions to follow but sadly im stuck with Monterey.
what Mac do you use?
3:45 Jessie it is possible to use my iMac 2010 27"" with Ventura with the OpenCore-Patcher 0.6.7? i have installed already and everything works fine BUT photoshop gives an Unknown GPU error: "Your graphics processor is not compatible" Metal unavailable and insufficient VRAM (0mb pf 1500 mb required) What do you recommend to do to solve this matter? Thanks a lot for your time, great channel!!!!
It's not Metal capable. the re-implemented graphic drivers can run Ventura, but all applications that need Metal support won't work. so either exchange GPU to a Metal capable one (is difficult or not possible depending on iMac version) or staying with older application versions that were still supported by High Sierra (latest macOS without Metal requirement)
@@JessiesFlying Thanks a lot for your time Jessie, It's very sad that Ventura is working fine in iMac 2010 but the only problem is with Adobe Photoshop 2023 and 2022, i haven't tried with 2021. I'm looking for a solution in adobe's forums. Thanks again for your reply.
Hi, am I right when I assume it works, but veeeery sloooowly?
Depends on the hardware 😬
Thanks for your great tutorial. I have an iMac (early 2009) running El Capitan. I tried to instal Monterey following your instructions (UNSUPPORTED MACs with Monterey & Ventura - Ultimate Tutorial!). First I installed Open Core. As the option for updating didn't show, a modified the SMBIOS as you said. Now I got the prohibitory symbol when I try to boot. I have already tried all combinations Key to access Recovery without success. What can I do? Do you think I lost my iMac?
But you get to OpenCore boot selector (by selecting EFI boot in apple boot selector)?
@@JessiesFlying Yes, and when I elect it, the signal appears. If I don't click, the computer initializes again and again.
@@mlmalard if you have a USB drive with OCLP you can boot from there and reset SMBIOS settings…
Hello, have you tried to boot with NVRAM reset? Hold cntrl or alt+cmd+R+P while you power on. Wait for two chimes and then release the keys.
As annoying as it is it works on my 5,1 cheese grater.
Hi Jessie, hab grad Probleme mit meinem MacBook Pro 15“ aus mid 2010, 1TB ssd & 8 GB RAM . Monterey lief gut! Dann HAB ich eine andere ssd eingebaut und hab versucht Ventura mit OCLP 530 zu installieren… hat im ersten Versuch leider nicht geklappt… dann hab ich die Originale Monterey ssd wieder eingebaut und sah , das die ssd nicht mehr gemountet wurde…ich musste alles löschen… auch die ssd mit Mojave wurde nicht mehr erkannt… Aber irgendwie hab ich es jetzt geschafft mit 2 Ventura boot sticks Ventura zu installieren… „JUHU SECHT DER GURU“…
Loft jut Jessie !!!
Falls ich bugs erkenne, teile ich diese dir mit.
any news about iPads…? Mein iPad Air 2 nimmt nur IOS 15.x… brauche aber iOS 16 um ein 3D Tool zu installieren…
Danke für die Info, aber grundsätzlich werden erst Macs ab 2012 von Ventura mit OpenCore unterstützt. Bin gespannt auf dein Feedback! Zu iOS hab ich leider noch nichts…
Thanks a lot Jessie! I now can use my MacPro 4,1 (2009 ex 4,1) with OCLP 0.6.8 and Ventura 13.6 and it works perfect from a NVME-Drive and a Radeon RX 590 RX. USB-3-PCI is working, had to reset some rights on the other Harddrives, but bluetooth is working, Wifi is working, not a lot difference in speed coming from Catalina. Could also change the Icons in dock to my favorites and im really happy. Never could use Handoff, Airdrop and now I can use all the features from my watch also. Thanks for all the good advice and also the boot-trick with my PC-GPU.
🧡🙏🙌
Great to hear!
Hello, I have an Mac Pro early 2008 and If I do this, will my data and music software be deleted or I ll be able to use everything as I use now on El Capitan??
At just before 10:00 on the video, I was able to select the upwards arrow for EFI Boot, then I saw the 'Install MacOS Monterey' icon, but no upwards arrow. It appeared for a second then there was a white circle with a backslash, then the Mac turned off.
Just wiggle left and right arrow during boot, this interrupts auto-selection of OpenCore. But make sure you keep OPTION pressed and select EFI Boot first!
@@JessiesFlying OK, so now I got further. I was able to select the 'Install macOS Monterey' icon. I then see the Apple logo, but instead of getting the screen where I can select to upgrade, it takes me straight to the first screen of agreeing to the license. Then on the second screen, it freezes when attempting to pair the bluetooth keyboard.
@@kieranwright6346 that’s weird, it should bring you directly to the recovery menu where you can select either harddisk utility or installing Monterey… 🤔
@@JessiesFlying Maybe it's something to do with holding down the Option key? Should I still be holding it down at this point?
@@kieranwright6346 hold it down until you see the first apple boot selector, then release it and select EFI Boot
Thanks a lot you helped me install monterey on my mac pro 2012 without the official mac display card,I'm just having the wifi problem and I spent hours trying to fix it with no luck,the open core patch twice method didn't work I can see the wifi is on and when try to join manually and enter the ssid and password it also refuses to connect .
I tried every think so I would be gratefull for any advice and thanks again
do you have an upgraded WiFi module installed?
@@JessiesFlying Thanks a lot for the reply , I'm using the default broadcom module that came with my 5.1 mid 2012 . I don't know if this info is usefull but the bluetooth is working fine
@@shamsbadr4679 if WiFi or Bluetooth is troublesome it's most of the time easier to just buy a cheap WiFi USB stick to avoid the hassle...
very helpful video! but i have problem. I install ventura to unsupported mac (mac mini) but the graphics are very slow. Is it possible to roll back with clean install of Monterey latest version? (I want to remove all settings from OpenCore Legacy too)
Yes, create USB installer of Monterey and boot from it. Then wipe harddisk and install, but data will be lost
Thanks for the video, my question: with bootcamp / windows 7 installed, will it work or is there something additional to do for keeping the dual boot ? Mac Mini late 2014
Be careful, the OpenCore Legacy patcher always delete the whole EFI Partition and installs itself then afterwards. I have not tested it in combination with windows, check Dortania’s guide for details
Great video! but, you can upgrade the ram on the mac mini from 2010 to 2014 to 16Gb, th e 2018 till 64Gb.
That’s right 👍
I have a late 2013 MacBook Pro that’s currently running the most current (unsupported) version of Monterey, and in the system settings updates it’s showing and update for the current version of MacOS Ventura. Can I upgrade to Ventura that way? What will happen if I click update to Ventura from the unsupported version of Monterey? Or do I need to start the process all over again and upgrade to Ventura thru Open Core Legacy with a usb. Also, is there a way to install Ventura without deleting all of my files and content? Like can I just update to it? Or do I need to do a fresh install and wipe the whole hard drive?
You can just update it, but make sure to have latest OCLP downloaded and installed, then reboot and update 👍🚀
What if i am outside of tha mac (not signed in because i just bought it 2nd hand and was factory reset ,2015 imac) not accepting bootable usb ahowing up but not installing at all
use recovery mode to install latest official macOS, then update
Help! I did, thanks but I still can’t be able to screen mirroring wirelessly or “thunderbolt hdmi cable not detecting”
What Mac model do you use?
MacBookPro late 2012 thanks 🙏
@@melkamyaradalig6205 as far as I know you need a Thunderbolt 2 cable between the Macs…
Am trying to connect to smart tv
The cable I used was “1 side thunderbolt &the other side is hdmi” not detected. Is there any process that I need to activate thunderbolt drive or …
I saw little bit old this great video didn’t reply to me. I stuck in the middle since once I updated to Ventura, I don’t see OS X Yosemite which he follows in the step. 🙏 again
Hello. i want to upgrade my 2012 mac pro to Monterey but i have a problem in that my restart doesn't work . Can i just shut it down and back on at the restart points?
Yes and you can try NVRAM reset if it’s stuck
Hi Jessie. Great Video. I have a MacPro 2012 - 5.1 with a Saphire graphics card and Mojave. Therefore I can not see the Apple boot selector.
If I now reinstall my original Apple graphics card I can see the boot selector and determine the boot drive, but I don't understand how I should then install Monterey, since this again requires the Saphire graphics card like Mojave. Mojave won't boot at all without the Saphire, so I can't use the software update feature either.
What can I do now to install Monterey over Mojave since I don't want to reinstall all my programs?
Kind regards
Thomas
Moin, einfach im apple boot selector EFI Boot auswählen und STRG gedruckt halten (das Logo wird zu einem Kreis) und damit als Standard-Boot-Option. Dann einfach mit der RX580 updaten, es sollte jetzt immer erst OpenCore geladen werden… 👍 Big Sur oder Monterey kann man aber auch mit der alten Grafikkarte installieren, da ist keine Abfrage drin, nur das Setup ist ohne Metal sehr langsam. Nach der Installation einfach die Grafikkarte tauschen…
There are a few things I don't understand here. You gave us links to websites that have that software but they are only for windows. I'm running a MacBook Pro (Mid 2012). Did I overlook something? And then the document that you put a link to in your description says its for 10.14 and above. I'm running High Sierra 10.13.6. So I'm confused. I don't know what to do. Thank you for any help you can give!
No it’s not for windows: github.com/dortania/Opencore-Legacy-Patcher/releases
And it works as well for 10.13.6 👍
Thank you so very much. Because of your videos on how to install Mac OS Monterey on my old 2010 Mac Pro, I have been able to resurrect that old beast and keep using it. It has been my favorite computer for a long time, and I missed it when I was forced to upgrade my OS by some 3rd party app developer. The videos are wonderful. Thanks again!! 👍
You’re welcome, sharing appreciated 😬
Mac 5,1 running Mojave, sapphire Radeon RX 580 8GB graphics card 48 Gb RAM. Can I use this method to go straight to Monterey or do I have to step via Catalina etc?
If you have latest firmware (should be fine when using Mojave) yes 👍 but I recommend testing it on a different drive first
Also the problem with the display port on NVidea metal cards (MacPro 5.1) which stops the picture put through after going to sleep and doesn’t come back when waken up? The patcher doesn’t solve this problem.
Not personally, but I heard some trouble with sleep with the MacPro. I recommend disable sleep and shutting it down…
I have a Late 2014 iMac with a 27 inch Retina Display. After installing macOS Ventura, it doesn't recognize my built-in 5k display and does not show the Scaled Display Resolutions that I use (1600 X 900). How do I get macOS Ventura to recognize my Retina Display?
Did you apply the post install root patch already?
@@JessiesFlying Not yet. I assume that the post install will fix the display issues. - Thank you.
@@Huckelowb yes, it adds the missing graphic drivers
@@JessiesFlying Thank you so much, I did get Ventura working with the display issues I was having.
Great video! Is there a way to test of the GPU acceleration is working correctly? This is aver reverting the root patch. Thanks
Download VideoProc Converter (free), go to „settings“ and then to acceleration…
@@JessiesFlying tried that. It shows everything enabled. Watching the gpu usage while working in premiere shows little to no gpu usage. Radeon rx580 in 5,1 Mac w/ big sur.
@@RileyLakeProductions try some benchmarks like Geekbench if graphic speed is ok
Hi Jessie thanks for all your videos man, they have a lot of great information. I have open core running Big Sur 11.6 for over a year now on a SSD drive, the Open Core is on a USB I never installed the Open Core on the drive is that a problem? Should I put the Open Core on the drive instead of the USB?
Using your tutorials it runs great. Bluetooth don’t work for me in big sur but wifi does.
Can I upgrade to Monterey or Venture from my Big Sur drive? I don’t have another spare drive I want to upgrade my big Sur OS drive with open core,I think I want to upgrade to Venture is there any issues I should be aware of if I upgrade with my 5.1. Does Ethernet work in Venture?
How difficult is it to upgrade from Big Sur OSX to Venture in Open Core? Can I even do it?
My set up is 5.1 12-Core RX 580 gpu running Big Sur
I am up grading my Wifi and Bluetooth to 4.0
I am wondering do I need a new Wifi and Bluetooth in the new OSX Venture?
This is what I purchased Mac Pro 2010-2012 (5,1) - Apple Broadcom BCM94360CD - 802.11 a/b/g/n/ac with Bluetooth 4.0 is this okay for Venture?
I have a 2.0 USB hub because in a newer video you mention that I might need a USB hub to install Venture is this correct. So I plug the keyboard into to USB hub and it should be okay?
Any help would be appreciated.
that are too much questions for a comment - see my tutorials for all the answers please
Hello, I would like you to make a video explaining how to install Windows 10 on a Mac Pro 5.1 through Ooen Core Legacy Patcher. Greetings and thanks for sharing your work.
That is actually on my bucket list for one of the next videos... ;-)
Thank you, I have tried several times following the thread to which the official page refers and I have not been able to do it, I imagine that there will be many people to whom the same thing has happened.
I'm working on it....
hi, I want to try out on my pc, i have gtx 1050 ti graphics card, can i build a hackintosh ? usng opencore legacy patcher ?
nope, OCLP is only for Macs. You have to use OpenCore and go through their website to find correct settings / drivers...
This was very helpful. I do have a question. I now have Monterey running on my old 2013 Mac which I wiped first and I can restart it with Monterey opening but I don't see the Opencore anywhere on my computer or even applications. I've tried to add it again but it restarts without showing me the EFI as an option, only the main hard drive. Should I be concerned?
It has just a short time to show the options, just wiggle left and right buttons on the keyboard during boot to prevent it automatically going on and you will see the OpenCore menu 👍
I have a 2013 14,1 iMac. When I select the open core from the boot loader selection, I get a 🚫 symbol.
And then the Mac shuts off. The iMac has had a factory reset and it is currently running Yosemite. It is journaled. I don't know what I am doing wrong
I would recommend updating it as high as officially possible (at least High Sierra) to get all firmware updates done. Yosemite might be too old for OpenCore🤔 Did you try NVRAM reset?
@@JessiesFlying
Thank you.
So you are suggesting that I start with High Sierra and move up from there?
Yes, I performed a NVRAM reset. The iMac was unable to see the links to the "Assets" on GitHub so I airdropped the link from my MacBook Air. (I didn't have a flashdrive on hand.)
@@JessiesFlying from what I understood, I should be able to download directly to the iMac and install it from there, correct.
Again, thank you.
@@jasongarcia4830 yes, you can download Legacy patcher, install on your harddisk and then update macOS 👍
I did everything you told me to do, to install the OpenCore legacy patcher. But at the end when restarted my mac and chose the opencore icon, after the Machintosh Hd. There was no update.
: (
pls help!!!!!
So the update doesn’t show up?
Great video, Thank You very much. I have meet this problem
when installing opencore on usb disk efi, i get an error ocurred! 0:188: execution error: Vplume on disk3s1 failed to mount. If you think the volume is supported but damaged, try the "readOnly" option (1) Please help
Thanks! Did you do the USB installer creation through OpenCore legacy patcher before as well? Maybe redo it and try again or try another usb port or another USB drive… 🤔 do you have administrator rights?
Thank You for your replay. I did usb installer creation through opencore legacy. But used disk utility to format usb before. Regarding administrator’s right I am using gui and not terminal, so I guess so because it is asking my administrator password to proceed.
@@frederiklikaj did you try another USB port or drive?
I tried just one more time and it worked. Thank you
@@frederiklikaj great to hear!
Thank you so much for this !
I’m experencing some problems upgrading from catalina to monterey in my Mac Pro 5,1.
After Booting from EFI the monterey installer starts until 13 minutes left than the maschine restart and if I choose MacOS installer the screen goes black with this symbol 🚫, if I choose monterey everething starts over again.
Am I Missing something ?
Of couse with the original graphic card.
Any Idea?
Thanks
Boot from EFI boot ☝️
I've gotten my 5,1 macpro update to Monterey using your tips. But now my legit version of Final Cut Pro isn't working and I can't seem to update it without updating OS to 13.4 or higher
You would need an older version of Final Cut maybe… check out the procedure here with my iMac 2011:
Does an UNSUPPORTED macOS make any sense? - Part 1: Vintage MACs
ua-cam.com/video/vr3ub4Qq2Ds/v-deo.html
i have already installed Monterey version 12.6.3 and now i want to upgrade to Monterey 12.6.5 . can you please tell how to ?
install latest OCLP, reboot and then just update via "settings".... 👍
Ah @ 14:21 there is the info on WIFI and Bluetooth connectivity I was hoping for.
The Hashwell is a must for Ventura but not for Monterey then. MB pro 2012 not good but MB 2013 is good.
With OpenCore Legacy patcher you can install Ventura on 2012 Mac’s (but I don’t recommend doing it on pre-Haswell)…
@@JessiesFlying Yes I see, speed will drive me nuts.
hello Jessie. I have a Mac book pro 2019 Intel Core I7, 16 GB memory with Ventura OS. I need to install Catalina on a volume or an external disk as I have an expensive software which will only work with Catalina. the OS is not letting me download the Catalina APP can I do it with a DMG file? help please.
Just use the OCLP to download or Apple's homepage (use Safari): support.apple.com/en-au/HT211683
@@JessiesFlying when I reboot and chose to install the OS Catalina the screen goes black and there is a block symbol on the screen…. I am not have any luck…
@@JessiesFlying by the way I just bought this Mac book pro, or is a refurbished machine and OS Ventura might have been the factory standard on this machine as it could have been one of the older machines left in stock after M1 started shipping. Would I still be able to run Mojave or Catalina on a disk partition or external disk?
@@tomstopper5281 now I got it: no, you cannot install macOS older than factory macOS as the older macOS don’t have the required drivers
I am stuck at the choose startup disk screen , it threw me an error when conducting the software update. Help me pls
You gotta give me a little more info about that…
I have followed all of the steps. First, changed the SMBIOS level to moderate. Next, select EFI boot, Select the drive, and then I receive the following.
"A prohibitory symbol, which looks like a circle with a line or slash through it, means that your startup disk contains a Mac operating system, but it's not a version or build of macOS that your Mac can use."
I currently have macOS High Sierra version 10.13.6. Please advise
Which Mac model do you use?
@@JessiesFlying
Do you think my Boot ROM Version: 138.0.0.0.0 is the problem?
Hardware Overview:
Model Name: Mac Pro
Model Identifier: MacPro5,1
Processor Name: 6-Core Intel Xeon
Processor Speed: 2.66 GHz
Number of Processors: 2
Total Number of Cores: 12
L2 Cache (per Core): 256 KB
L3 Cache (per Processor): 12 MB
Memory: 64 GB
Boot ROM Version: 138.0.0.0.0
SMC Version (system): 1.39f11
SMC Version (processor tray): 1.39f11
Serial Number (system): H01060MQGWR
Serial Number (processor tray): J510101CHBH8B
I have two graphics cards so I can see the boot screen.
ATI Radeon HD 2600 XT:
Chipset Model: ATI Radeon HD 2600
Type: GPU
Bus: PCIe
Slot: Slot-4
PCIe Lane Width: x4
VRAM (Dynamic, Max): 256 MB
Vendor: AMD (0x1002)
Device ID: 0x9588
Revision ID: 0x0000
ROM Revision: 113-B1480A-252
EFI Driver Version: 01.00.252
and
Radeon RX 580:
Chipset Model: Radeon RX 580
Type: GPU
Bus: PCIe
Slot: Slot-1
PCIe Lane Width: x16
VRAM (Dynamic, Max): 8192 MB
Vendor: AMD (0x1002)
Device ID: 0x67df
Revision ID: 0x00e7
Metal: Supported, feature set macOS GPUFamily1 v3
Displays:
Eight sticks
Memory Slots:
ECC: Enabled
Upgradeable Memory: Yes
DIMM 1:
Size: 8 GB
Type: DDR3 ECC
Speed: 1333 MHz
Status: OK
Manufacturer: 0x857F
Part Number: 0x463732314752363546393333334700000000
Serial Number: -
Model Name: Mac Pro
Model Identifier: MacPro5,1
Processor Name: 6-Core Intel Xeon
Processor Speed: 2.66 GHz
Number of Processors: 2
Total Number of Cores: 12
L2 Cache (per Core): 256 KB
L3 Cache (per Processor): 12 MB
Memory: 64 GB
Boot ROM Version: 138.0.0.0.0
SMC Version (system): 1.39f11
SMC Version (processor tray): 1.39f11
Serial Number (system): H01060MQGWR
Serial Number (processor tray): J510101CHBH8B
I have two graphics cards so I can see the boot screen.
ATI Radeon HD 2600 XT:
Chipset Model: ATI Radeon HD 2600
Type: GPU
Bus: PCIe
Slot: Slot-4
PCIe Lane Width: x4
VRAM (Dynamic, Max): 256 MB
Vendor: AMD (0x1002)
Device ID: 0x9588
Revision ID: 0x0000
ROM Revision: 113-B1480A-252
EFI Driver Version: 01.00.252
and
Radeon RX 580:
Chipset Model: Radeon RX 580
Type: GPU
Bus: PCIe
Slot: Slot-1
PCIe Lane Width: x16
VRAM (Dynamic, Max): 8192 MB
Vendor: AMD (0x1002)
Device ID: 0x67df
Revision ID: 0x00e7
Metal: Supported, feature set macOS GPUFamily1 v3
Displays:
Eight sticks
Memory Slots:
ECC: Enabled
Upgradeable Memory: Yes
DIMM 1:
Size: 8 GB
Type: DDR3 ECC
Speed: 1333 MHz
Status: OK
Manufacturer: 0x857F
Part Number: 0x463732314752363546393333334700000000
Serial Number:
Sorry for the late answer - I was on a military training this week.... You need the ROM 144 for the MacPro, so that might be the problem.
Hi Jessie,
Great tutorial! My MacBookPro11,2 doesn't show the opencore patcher when installed, reboot and the alt key on. What do I do wrong?🤔
Thanks for your reply!
Olivier
So you can see the Apple Boot Selector, but no "EFI Boot"?
@@JessiesFlying I do see EFI Boot. I as not aware that was the selection to take. I took that selection, but I came in a old bootcamp Windows and not the opencore patcher. Can you advice me what to do next?
@@olivier1363 create a USB drive as in the video and then keep option pressed. There should be 2 EFI Boot options, take the one with the USB drive logo👍