Every Day Detailing - Great video and nice work on the transformation 👌 Searched for you on web, but couldn’t find a website - how do we get in touch??
I am in awe at the amount of work you put into these vehicles. You should be charging at least double what you do. I live in the US and just getting the wheels repainted alone would have costed what you charged for the whole detail.
Very impressive skill-set; hats off to you!! A man of many talents, and I'd guess that this dealer knows he's getting great value for money with you. The cost of subbing out that variety of jobs would triple that £300 charge easily! Another decent video, thank you. Keep 'em coming!
As always great video, and great work. Others have mentioned you're pricing, all I'll say is trade customers will drop you like a sack of spuds if they think you're too expensive. It's a bit of a balancing act between keeping trade customers happy and earning what you're worth. Anyhow...glad to see you've discovered PERL & Aero 303. I've been using both a number of years. 303 on engine bays leaves a nice finish, although not as cost effective as PERL, which you can dilute. 303 also offers good UV protection so great for finishing off headlights that have been wetsanded for example. Have yet to use KC H9. How does it compare to H8. Keep up the great work, and the videos. All the best Dave. 👍👍
300 pounds only?! mate you're crazy! I would have charged 1k+ for that amount of work. the wheels alone I'd charge 100 quid each! You deserve to earn more with the amount of work you put in
£100 for rubbing a wheel down and painting it. You can get wheels refurbed for less than that. There's no way anyone could charge a grand for this work. It's not even a full paint correction, but he is way too cheap
Champ I just had to say what a excellent job seriously... The wheels came out so good and the hole detail of the car was excellent... I'm definitely going to subscribe
Thanks a lot! Was doing a video last week but one of the camera's played up and some footage was lost :( .. didn't want to upload any old rubbish! when I Have a chance will go though it and make a 20 min video :) thanks for the continued support Hansjorg :)
Love the content and structure to your Videos, the end results you get are quite amazing as some of them cars are disgusting, keep up the great work and keep the structure to your videos please, one of the best on YT
Have you tried using ready mask instead of using loads of masking tape? You’ve probably seen it before. But incase you haven’t! It’s a roll of thin plastic sheet that is electrostatic charge so it clings to the job. It has a line of 3/4 inch masking tape attached to 1 side. And when you pull a length off the dispenser you then detach it using the built in cutting strip on the dispenser. Iafter stitching it you then unfold the plastic to 4 times it’s width! You buy the dispenser and roll of plastic sheet together then you just buy the roll when needed. It comes in 4 inch that opens upto 16 inch. And 10 inches that opens up to 4 foot!! It’s ideal for the wheels, body, brakes etc. And is less labour intensive, and more cost effective! I’ve used it for years for domestic, commercial, and automotive painting! Hope this helps bud!! Love your format and commentary. It’s a winning formula!!
Yes, CarPro Pearl is a great product to use it in the motor but if you use the same 303 Protectant you already have inside the motor, it will give you same results. I normally just use soapy water like Dawn and agitate all surfaces with it, then wash it off, then dry it a leave blower or compressed air, then apply the 303 so save $$ ££ €€ on APC.😉 By the way, AM Details has a great clay bar that only needs water as lube, so also allows you to save on lube. Sometimes by just using iron fallout remover named Korrosol from Bilt and Hamber and/or CarPro Trix does such an excellent job that allows you to save time on claying the vehicle. Great product Collonite as well as Fusso coat for black vehicles. It's impressive how you restore those calipers and wheels. I will try what you do since never tried it or done it 🤔😃 Thanks for your review and teachings. Xoxo from Puerto Rico 👍👍👍🇵🇷
Brilliant video buddy. I really love the job you did on the Eos. What paint did you use on the mirror housing plastic (you never said the make of the Satin black aerosol)? Mine are in need of repair and seeing you do it has convince me to give it a try. Keep up the good work!
Thanks you calla P , I did film another car but was unsure to post it due to part of the camera footage being corrupt! I may have to do a short version of it :)
Every Day Detailing Welcome 🙂 Your channel is a great one, excellent attention to detail and you’re definitely in my top 5 detailers to watch on YT. Hope that your channel continues to accumulate subscribers because you’ll have earned them 👍
I’ve just bought a 07 Eos ......nice car but I’ve discovered issues with water leaks into the front of the car .....plenty of videos re A Frame Drain Channels and Tubes but I reckon I’m gonna have to get the carpet out and replace smelly padding/underlay underneath ......anyone here got any tips re interior trim removal to facilitate ? Wish I was near this guy , what a great job !!!
Thanks MF SMUG I have another one coming in the next two weeks I'm on instagram everydaydetailing1 you can see the before part already, as the car is being filmed this weeked :)
Every Day Detailing can’t wait. Your return and Gary from Autoshine Blackpool returning this week have been the highlight of my week. Keep up the superb work.
How do you even make money? The amount of work and at this standard? Perhaps you start charging by the hour instead of selling these package deals! Great video and content as always, love the work!
Great video, wish you lived local, i have two scratches on my bonnet into the clear coat, a mobile 'chxxs away' wanted £400 to get the whole bonnet resprayed, didn't even come out to look, only saw a poor photo, says they dont do smart repairs on bonnets?
Great tool, quite a bit of vibration if used for long periods, I just taped a micro fibre mitt on the end 👍 reduces the vibration 😎 crude fix but works well.
Very nice. It cleaned up really nicely. I think it is also in part to it being a VW from that era because they were very well made and high quality. I always wonder about the diamond finish wheels. Are there repairers that can actually get that finish back? When I bought my car, before I took delivery there were some light scuff marks on one rim. The dealership repaired it but it looks only like paint and not like that lathed diamond cut finish of the rest. Also it is only on a small part of it but it is there and I can see it.
Sorry, but I think the only thing you can do would be to google any dedicated alloy repairers in your area, choose one, then take the car to them to see what they are dealing with. There are thousands more cars on the road with diamond alloys now, so repairers will be seeing them more frequently and should repair your wheels no problem if just minor scuffs.
They can be re “skimmed” a couple of times depending on the damage! But if they are to bad it’s one colour or replace 😊it’s nothing I can get involved in ... that would be out sourced to another company.
@@everydaydetailing6449 Interesting. Thanks. 😊 I was thinking of replacing it all together. Mercedes is wanting to charge R6500 (equivalent to about about 300 pounds) for one rim. Not too happy with them but I guess that is the price for that type of wheel.
ive said it before and ill say it again,,youre selling yourself short !!!! 300 lids for all that graft is working half price . i just hope your customers realise what an absolute steal theyre getting and keep you in regular work with a decent tip on the monthly.
Trade based product, but there are many caliper type paints on the market, I think even halfords sell some from memory, just make sure you mask everything up and use a high temp paint! I think even hammerite sell a high temp spray paint.
Have you tried just cleaning the engine and then spraying it with Meguiars Hyper Dressing? Seems to be an easier and more time efficient method for you.
Yes but would have needed a second stage to refine, and as the video states it was a single stage correction (tidy up) the customer set a budget 👍 and as per the rest of the comments got extreme value for money 😎
Interesting that you use the yellow pads, chemical guys say it's their most aggressive compounding pad and needs to be followed up with a softer polishing pad. What do you think of it? Is it aggressive enough to take out wet sanding marks? Also where are you based? Do you take one off customers like at the weekend or something?
Hi if you compare a brand new yellow hex pad to a rupes blue cutting pad, the difference is really noticeable! The rupes is way more aggressive. Yes if you are doing a more involved job you would follow up with a softer pad 👍 but I clean cheaper cars with different customer requirements. With the right compound it will take 1500 sanding marks out! I Already have a set client base 😎 to busy to take on more sadly.
Your attention to detail is off the scale! Do you offer your services to us mere mortals or is it just to the trade? I really feel i could trust you with my motor!
Looks amazing, inside turned out great considering how stinking it was! I've just started to sell detailing products myself, any chance you want a sample lot for free? Would love some other people's opinions on the stuff but struggling to get any out anywhere
Hi thanks for the kind offer but not looking to do reviews! Have you tried Paul dolden detailing or the forensic detailer? Both have very good review channels 👍😎 they might be able to help.
Great job on that. It did look like you didn't clean the barrels of the wheels...is that just an illusion? It made me cringe a bit when you did the rims if you hadn't done the barrels. So many times I've cleaned cars with dirt sealed under the clear.
They got a scrub, but being honest and transparent they were very weathered/pitted/ flaky and the customers set a budget! As stated in the video (you are right) the best way was for these to be sent Away and fully stripped, the customer chose for the face only to be resprayed 👍
@@everydaydetailing6449 makes sense from a resto point of view. I'd still say I'm surprised from a cleaning point of view... But I also know how long it takes even if you do it frequently! Bilthamber auto wheel is fantastic but there's only so much it can do.
How are you profitable for 300£ for all of that.... like wow... one question you get no hazing just by doing 1 step polish with the Koch H9 and yellow flex pad?
I get asked this a lot 👍 but as numerous videos show the combo works well for me 😎 if the pad was a lot more aggressive like a rupes blue pad, then there may be issues. Can more gloss be obtained though more stages .. absolutely but at this price point, it good enough 😎
Something doesn’t add up here? Outstanding range of high end tools and specialist equipment, battery operated multiple da polishers, 3m breathing system, ramp, etc High quality materials Polite, well spoken man presumably SE England? A small workshop must cost £125 a week to run including electric. And you charge £300 for two days labour?
Hi R A I have been cleaning for the trade for over 20 years and you just build up tools over a period of Time 😊 I tend to buy the latest equipment at trade prices .. then after a year sell them on for only a small loss, it’s a great way to keep up with the latest kit. I am in the south east 👍can’t lose the accent 😆 This can be all done in 10/12 (1.5 days) with planning if I start after lunch, do the wheel before I go home, then they are dry for the morning 😀 Unit is off the beaten track so cost effective, dealing with trade only it doesn’t need to look impressive. I work 6 sometimes 7 days to make it all work! Being open and transparent hopefully UA-cam will bring in a extra income 👍 plus it’s fun to do and help others learn or be entertained 😎
Smart repair alloys £150 a set, a full refurb sent away and stripped £250, diamond cut is expensive even to trade circa £85 per wheel. Guys who are in mobile vans can do 3 sets a day on site (smart repair) £450 a day less materials £400 not a bad days work/earn?
£300 for all that work???? You are being robbed mate, unless of course you have all the consumables for free, don't pay rent or services bills and they paid you a min of £200 just for the wheels extra and you did all that in half a day. Otherwise I am at loss how can you make any money... Still, great video!
Hi Ahamed :) Thanks for watching :) Sadly not looking any new customers at the moment, flat out after lock down and with youtube it's a little bit crazy :)
No, I did a set of my own wheels about 10 year ago by spray cans and enjoyed it, after seeing people do “smart repairs” in the trade, I picked up a spray gun about 3 years ago! Had some advice and help from a car Pinter/watched UA-cam videos, practiced on old “spare wheels” until I could do a ok job 😊 then offered it as a service! Learnt a lot from the Aussie guy on UA-cam “the gun man” painter in Australia.
@@everydaydetailing6449 Im a DIY at home, not offering a trade, but have done wheels on my very old trailer and about to do my Daughters 15 year old car, so fun watching your video's. What Spray gun did you buy and are you happy with it? I'm currently spraying a panel on an old Mk1 Audi TT. See what lockdown does for you!
@@adrianphotovisions2308 Hi I use an ANI mini gun bought from spray guns direct .om (uk) 1.2m jet, will spray thin primer/base/top coat around £75 ish from memory :) real work horse.
@@everydaydetailing6449 Ah, just missed your reply and pressed the buy button on the Devibiss FLG5. Even though my first gun was not cheap, like £20, I wasnt happy with the results. The FLG5 has had rave reviews for its price and even from your favourite Gunman!
@@everydaydetailing6449 You do an amazing job at all your details and keep it up and I was going to ask you how long did the polishing take of the car?
Working on it! Needs better editing as well :) In truth though as a smaller youtuber .. sometimes you upload a high quality video and it gets squashed quite a bit .. larger channels get higher resolution :)
Absolute bargain for the customer doing that amount of work for £300.
I do offer good value 👍😎
Every Day Detailing you could offer 500 and people would still go for it.
Every Day Detailing how can contact you
Every Day Detailing - Great video and nice work on the transformation 👌 Searched for you on web, but couldn’t find a website - how do we get in touch??
As always excellent job well done
I am in awe at the amount of work you put into these vehicles. You should be charging at least double what you do. I live in the US and just getting the wheels repainted alone would have costed what you charged for the whole detail.
Thanks 😊 trade work is low prices but high turn over 👍 but does give me great content 😂 I appreciate you taking time to view and comment 😎
Sure you didn't forget another zero in that quote?? 😂
Jokes aside, you did a phenomenal job! 👍
Lol I wish thanks for viewing/commenting 👍😊
Cool to see you commenting here, love your videos /from a fellow swede :D
Can't really get any better than that for £300, made the car look like new again, like the fact you did the calipers also, spot on job 👍🏻
Thanks Daniel appreciate your feedback 👍😊
I am mesmerized by the combination of the music and the machine polishing - very calming 😌
Great work!!
Thank you so much 😀 glad it chills you out :)
This car looked so much better after the detail, it just shows how some careful restoration can really improve a cars appearance!.
Thanks Skoda Katie :)
Very impressive skill-set; hats off to you!! A man of many talents, and I'd guess that this dealer knows he's getting great value for money with you. The cost of subbing out that variety of jobs would triple that £300 charge easily!
Another decent video, thank you. Keep 'em coming!
Thanks for the kind words 😊👍
And lots of content coming.
So glad I found your site, your work is great value for money. You are always doing a extra job that many would not do. Top man 👍👍
Much appreciated! :)
Thanks Duncan for your continued support :) means a lot
Just found your channel. Great vids, really enjoy them. You are way underpricing the work you do. Subscribed 👍
Thank you very much! Colin much appreciate the sub and kind comments 😀👍
it’s crazy because this guy could literally get 6k easily for this in us. great vid man!
👍 thanks
£300 well spent I'd say. Great videos! keep them coming!
Thanks 👍
As always great video, and great work. Others have mentioned you're pricing, all I'll say is trade customers will drop you like a sack of spuds if they think you're too expensive. It's a bit of a balancing act between keeping trade customers happy and earning what you're worth.
Anyhow...glad to see you've discovered PERL & Aero 303. I've been using both a number of years. 303 on engine bays leaves a nice finish, although not as cost effective as PERL, which you can dilute. 303 also offers good UV protection so great for finishing off headlights that have been wetsanded for example.
Have yet to use KC H9. How does it compare to H8. Keep up the great work, and the videos. All the best Dave. 👍👍
H9 and H8 very similar :) thanks for the support Dave :)
Nice turnaround, alloys especially. Also good to see a "basic" set up for polishing, single stage, one pad and some compound, great for a beginner.
Thanks Daytona 👍😊 due time costs single stage polishing is what most cars get 👍 this combo works very well.
Incredible effort and amazing result! Well done, again!
Thanks David 👍😊
300 pounds only?! mate you're crazy! I would have charged 1k+ for that amount of work. the wheels alone I'd charge 100 quid each! You deserve to earn more with the amount of work you put in
Thanks for watching .. I'd love to charge that but I wouldn't get any work! but a price increase is on the cards!
Every Day Detailing hi mate how can I contact you?
£100 for rubbing a wheel down and painting it. You can get wheels refurbed for less than that. There's no way anyone could charge a grand for this work. It's not even a full paint correction, but he is way too cheap
Another clean car, looks nice in black with the red leather seats,nice job on the wheels,the new owner will be over the moon.
Hi Steve
Yes the red and black combo is nice :)
Nothing wrong with that paintwork better than a lot of new cars these days ! 👏👏
It was a big improvement 😀
Champ I just had to say what a excellent job seriously... The wheels came out so good and the hole detail of the car was excellent... I'm definitely going to subscribe
Thanks Tom for taking the time to watch/comment/ sub 👍😎
Best I’ve ever seen love the wheels and mirror cap details amazing work and content love it
Glad you like them! :)
Thanks for your continued support :)
Finally a new one 👍 mate, this is a massive turnaround!! Very good job!!
Thanks a lot!
Was doing a video last week but one of the camera's played up and some footage was lost :( .. didn't want to upload any old rubbish! when I Have a chance will go though it and make a 20 min video :) thanks for the continued support Hansjorg :)
Love the content and structure to your Videos, the end results you get are quite amazing as some of them cars are disgusting, keep up the great work and keep the structure to your videos please, one of the best on YT
Thank you Carl 😎👍
Great work on the wheels, the grey looks fantastic 👍👍👍👍👍
Thanks 👍
I like the grey as well :)
Beautiful car, awesome job.
Thanks Jorge 👍😊
AWESOME WORK !
Thanks 😊
Thank you for this video. Great job!!!
Very well done. Keep these videos coming.
Thanks David 👍😎 more in the way shortly.
Love your job man, keep it up!
Appreciate it! 😀👍
Have you tried using ready mask instead of using loads of masking tape? You’ve probably seen it before. But incase you haven’t!
It’s a roll of thin plastic sheet that is electrostatic charge so it clings to the job. It has a line of 3/4 inch masking tape attached to 1 side. And when you pull a length off the dispenser you then detach it using the built in cutting strip on the dispenser. Iafter stitching it you then unfold the plastic to 4 times it’s width! You buy the dispenser and roll of plastic sheet together then you just buy the roll when needed. It comes in 4 inch that opens upto 16 inch. And 10 inches that opens up to 4 foot!! It’s ideal for the wheels, body, brakes etc. And is less labour intensive, and more cost effective! I’ve used it for years for domestic, commercial, and automotive painting!
Hope this helps bud!!
Love your format and commentary. It’s a winning formula!!
Thanks Robert
I will look into that 👍😀
@@everydaydetailing6449 glad to help bud!!
Definitely got their money worth. 👍🏻
Thanks 😀
Colour of them wheels ties in really good with the red leather, really good job
I really like the colour combo as well 👍 smoke grey on black looks really nice 😎
Yes, CarPro Pearl is a great product to use it in the motor but if you use the same 303 Protectant you already have inside the motor, it will give you same results. I normally just use soapy water like Dawn and agitate all surfaces with it, then wash it off, then dry it a leave blower or compressed air, then apply the 303 so save $$ ££ €€ on APC.😉
By the way, AM Details has a great clay bar that only needs water as lube, so also allows you to save on lube. Sometimes by just using iron fallout remover named Korrosol from Bilt and Hamber and/or CarPro Trix does such an excellent job that allows you to save time on claying the vehicle. Great product Collonite as well as Fusso coat for black vehicles.
It's impressive how you restore those calipers and wheels. I will try what you do since never tried it or done it 🤔😃 Thanks for your review and teachings.
Xoxo from Puerto Rico 👍👍👍🇵🇷
Thanks for the detailed reply 👍😊
Will try the bilt hamber fallout remover, heard good things but currently out of stock, due to lock down 😎
Perfect job mate
Thank you 😊
Brilliant video buddy. I really love the job you did on the Eos. What paint did you use on the mirror housing plastic (you never said the make of the Satin black aerosol)? Mine are in need of repair and seeing you do it has convince me to give it a try. Keep up the good work!
A company called Tygris .. can be bought of ebay, their range of aerosol's are very good 😀👍
Love your videos!!
Glad you like them! 😀👍
great job mate👍👍
Thanks 👍 :)
Actually a very nice car. I’ve never heard of an EOS, VW they are not sold in Canada. That would be a great summer driving car with the lid off.
Hi Chanda
They are nice to drive and quite stylish 😎👍
As always excellent video content cheers
Thank you! Cheers!
Always appreciated the feedback Kev :)
Every Day Detailing your welcome
Thanks for the mitt tip too
No problem!😀
Nice work , I have a same Eos , with same wheels but it's an a individual model .😉✌️
Ah with the black and cream seats 😀
@@everydaydetailing6449 Yess , that's right ✌️
Wonderful 👍👌👌
Thanks 😊
Engine Bay Goals 🤤 Amazing
Thanks you 👍😊
Good to see you back chap 👍
Thanks you calla P , I did film another car but was unsure to post it due to part of the camera footage being corrupt! I may have to do a short version of it :)
Every Day Detailing Welcome 🙂 Your channel is a great one, excellent attention to detail and you’re definitely in my top 5 detailers to watch on YT. Hope that your channel continues to accumulate subscribers because you’ll have earned them 👍
@@callap8062 thanks :)
I’ve just bought a 07 Eos ......nice car but I’ve discovered issues with water leaks into the front of the car .....plenty of videos re A Frame Drain Channels and Tubes but I reckon I’m gonna have to get the carpet out and replace smelly padding/underlay underneath ......anyone here got any tips re interior trim removal to facilitate ? Wish I was near this guy , what a great job !!!
Great job!
I use maguires hyper dressing for engine bays.
Great tip! 👍😀
It is important to explain about what’s been done and what was asked for with in budget and customer expectations.
this was fantastic
Thanks 😊👍
That wheel refurbish was so fucking dope to watch.
Thanks MF SMUG I have another one coming in the next two weeks
I'm on instagram everydaydetailing1 you can see the before part already, as the car is being filmed this weeked :)
You’re back! And working on another VW 😁
Yes I am! Hi Diana
Thanks for watching and commenting :) few more VW's in the near future.
Every Day Detailing can’t wait. Your return and Gary from Autoshine Blackpool returning this week have been the highlight of my week. Keep up the superb work.
303 is class, good on exterior too
Not used it much for that purpose 😀
Great result. Whether its for a regular trade customer or not, you are far too cheap for that amount of work.
Thanks Kenny G 😊👍
Will look at a price increase soon 😎
Magician 👏🤙
👍😀
How do you even make money? The amount of work and at this standard? Perhaps you start charging by the hour instead of selling these package deals!
Great video and content as always, love the work!
Hi
I probably will increase prices :) but for the moment its great content for youtube and helps the channel grow :)
Great video, wish you lived local, i have two scratches on my bonnet into the clear coat, a mobile 'chxxs away' wanted £400 to get the whole bonnet resprayed, didn't even come out to look, only saw a poor photo, says they dont do smart repairs on bonnets?
I think its always better to get a visual estimate 👍😀
VWs always have top quality interiors
What polish machine are u using, can u write in description what tools are u using, and where can we buy, i wanna buy some stuffs
You’ve been robbed there for £300, turned out really well 😎
Thanks Kris :)
The car looks brand new just like my Mercedes after I washed it.
dude charge more lol. great video though! watched entire video
Thanks David 😎👍
Amazing video again 👌🏻 where do you get your detailing mits from ? Thanks craig
Same here just wondering where you get the mitts from. Stunning job on the car again btw 👌
Off ebay around £5 for 10 just search microfibre polish mitt or similar .. quite a few places selling them :)
Great video what have you put on the battery of your XFE?
Great tool, quite a bit of vibration if used for long periods, I just taped a micro fibre mitt on the end 👍 reduces the vibration 😎 crude fix but works well.
Very nice. It cleaned up really nicely. I think it is also in part to it being a VW from that era because they were very well made and high quality. I always wonder about the diamond finish wheels. Are there repairers that can actually get that finish back? When I bought my car, before I took delivery there were some light scuff marks on one rim. The dealership repaired it but it looks only like paint and not like that lathed diamond cut finish of the rest. Also it is only on a small part of it but it is there and I can see it.
Sorry, but I think the only thing you can do would be to google any dedicated alloy repairers in your area, choose one, then take the car to them to see what they are dealing with. There are thousands more cars on the road with diamond alloys now, so repairers will be seeing them more frequently and should repair your wheels no problem if just minor scuffs.
They can be re “skimmed” a couple of times depending on the damage! But if they are to bad it’s one colour or replace 😊it’s nothing I can get involved in ... that would be out sourced to another company.
@@owensteele1274 Thanks. 🙂 Wasn't too happy with the dealer but at least the scuff was gone.
@@everydaydetailing6449 Interesting. Thanks. 😊 I was thinking of replacing it all together. Mercedes is wanting to charge R6500 (equivalent to about about 300 pounds) for one rim. Not too happy with them but I guess that is the price for that type of wheel.
super!!!!
Thank you👍😀
Don't make us wait so long for the next video 🖐️👍
filming the next car currently :)
You’re videos are great. Fantastic work. Where are you based?
Hi Lewis South east of england :)
Every Day Detailing I’m the same, Princes Risborough, Bucks.
Can you give us an idea how long it takes you for example on the eps? Great video!
Eps?
Eos- sorry autocorrect!!
ive said it before and ill say it again,,youre selling yourself short !!!! 300 lids for all that graft is working half price . i just hope your customers realise what an absolute steal theyre getting and keep you in regular work
with a decent tip on the monthly.
Prices will go up but it’s great content 😊👍
Which paint did you use for the calipers? Planning to do mine soon
Trade based product, but there are many caliper type paints on the market, I think even halfords sell some from memory, just make sure you mask everything up and use a high temp paint! I think even hammerite sell a high temp spray paint.
Have you tried just cleaning the engine and then spraying it with Meguiars Hyper Dressing? Seems to be an easier and more time efficient method for you.
Great suggestion!
I use Autoglym Super sheen as well, its "super "quick. but wanted to try carpro perl as a few people had asked :)
Thats a lovely colour smoke grey that you put on the wheels...do you have a paint code please?
Pro xl range by Capella code ws02-1
@@everydaydetailing6449 thanks for that...sorry to keep on..do you think it can be made up in a rattle can if i supply the code?
What products did you use for the restoration of the exterior plastic? What paint? Tnxh, very nice video!
Carpro perl :)
@@everydaydetailing6449 i am talkin about the plastics in the mirrors
Great vid! What APC do you use?
Bilt hamber surfed H.D 😊👍 thanks for watching Joe
@@everydaydetailing6449 do you dilute it or use as?
What all purpose cleaner do you use and in what proportion?
bilt hamber surfex hd :) as per the instructions :)
would a heavier cutting pad have gotten swirls and scratches out?
Yes but would have needed a second stage to refine, and as the video states it was a single stage correction (tidy up) the customer set a budget 👍 and as per the rest of the comments got extreme value for money 😎
Interesting that you use the yellow pads, chemical guys say it's their most aggressive compounding pad and needs to be followed up with a softer polishing pad. What do you think of it? Is it aggressive enough to take out wet sanding marks? Also where are you based? Do you take one off customers like at the weekend or something?
Hi if you compare a brand new yellow hex pad to a rupes blue cutting pad, the difference is really noticeable! The rupes is way more aggressive. Yes if you are doing a more involved job you would follow up with a softer pad 👍 but I clean cheaper cars with different customer requirements. With the right compound it will take 1500 sanding marks out! I Already have a set client base 😎 to busy to take on more sadly.
@@everydaydetailing6449 ok! Thanks! Great content.
Hi, great video's! What cutting compound did you use?
Cheap breaks like the eos aren‘ t nice, that‘ s why I paint them in dark grey. You cannot see any dust on dark calipers.
Good to know 👍
Your attention to detail is off the scale! Do you offer your services to us mere mortals or is it just to the trade? I really feel i could trust you with my motor!
Thank you Stef 😎👍
Sadly just the trade, I may change one day ... but currently the trade does have endless filthy cars , so great for content 😂👍
@@everydaydetailing6449 Ok! What a shame though!!
Would love to know where you are based ive just bought used cars and its full of swirls
👍😀
Looks amazing, inside turned out great considering how stinking it was! I've just started to sell detailing products myself, any chance you want a sample lot for free? Would love some other people's opinions on the stuff but struggling to get any out anywhere
Hi thanks for the kind offer but not looking to do reviews! Have you tried Paul dolden detailing or the forensic detailer? Both have very good review channels 👍😎 they might be able to help.
@@everydaydetailing6449 I'll be honest I didn't think of review channels 🙈 I'll get on the case! Thank you
ayyyy m8!
Thanks 😊
Great job on that. It did look like you didn't clean the barrels of the wheels...is that just an illusion? It made me cringe a bit when you did the rims if you hadn't done the barrels. So many times I've cleaned cars with dirt sealed under the clear.
They got a scrub, but being honest and transparent they were very weathered/pitted/ flaky and the customers set a budget! As stated in the video (you are right) the best way was for these to be sent Away and fully stripped, the customer chose for the face only to be resprayed 👍
@@everydaydetailing6449 makes sense from a resto point of view. I'd still say I'm surprised from a cleaning point of view... But I also know how long it takes even if you do it frequently! Bilthamber auto wheel is fantastic but there's only so much it can do.
Best £300 the seller/buyer will ever spend on the car.
Many thanks 😊
How are you profitable for 300£ for all of that.... like wow... one question you get no hazing just by doing 1 step polish with the Koch H9 and yellow flex pad?
I get asked this a lot 👍 but as numerous videos show the combo works well for me 😎 if the pad was a lot more aggressive like a rupes blue pad, then there may be issues.
Can more gloss be obtained though more stages .. absolutely but at this price point, it good enough 😎
Every Day Detailing right i see! So how many passes per section do you do?
Something doesn’t add up here?
Outstanding range of high end tools and specialist equipment, battery operated multiple da polishers, 3m breathing system, ramp, etc
High quality materials
Polite, well spoken man presumably SE England?
A small workshop must cost £125 a week to run including electric.
And you charge £300 for two days labour?
I agree, the wheels alone should cost around £200
Hi R A
I have been cleaning for the trade for over 20 years and you just build up tools over a period of Time 😊 I tend to buy the latest equipment at trade prices .. then after a year sell them on for only a small loss, it’s a great way to keep up with the latest kit.
I am in the south east 👍can’t lose the accent 😆
This can be all done in 10/12 (1.5 days) with planning if I start after lunch, do the wheel before I go home, then they are dry for the morning 😀
Unit is off the beaten track so cost effective, dealing with trade only it doesn’t need to look impressive.
I work 6 sometimes 7 days to make it all work! Being open and transparent hopefully UA-cam will bring in a extra income 👍 plus it’s fun to do and help others learn or be entertained 😎
Smart repair alloys £150 a set, a full refurb sent away and stripped £250, diamond cut is expensive even to trade circa £85 per wheel. Guys who are in mobile vans can do 3 sets a day on site (smart repair) £450 a day less materials £400 not a bad days work/earn?
Every Day Detailing I love to detail my car how can I contact ?
You're doing more than the rest and thats why you will do better than the over chargers but that is alot 😂😂
thanks Sean :)
Where are you based? I'd like to get my car done
Sorry fully client base 👍
Where are you based? Do you only work trade customers?
UK south east and only trade, currently very booked up 👍😀
where are you based mate?
south east england :)
£300 for all that work???? You are being robbed mate, unless of course you have all the consumables for free, don't pay rent or services bills and they paid you a min of £200 just for the wheels extra and you did all that in half a day. Otherwise I am at loss how can you make any money... Still, great video!
Completed in around 10hrs 👍😎
I keep moving lol 😂 but yes will look at prices.
What area of the UK do you work in? How can I discuss a booking?
Hi not taking any extra work on at this time 😊thanks for the offer 👍
Great work form an expert. How do I contact to do some business
Hi Ahamed :)
Thanks for watching :) Sadly not looking any new customers at the moment, flat out after lock down and with youtube it's a little bit crazy :)
Every Day Detailing thank you 😊 I am really impressed with your work 👍
I'm guessing you have worked in a body shop before?
No, I did a set of my own wheels about 10 year ago by spray cans and enjoyed it, after seeing people do “smart repairs” in the trade, I picked up a spray gun about 3 years ago! Had some advice and help from a car Pinter/watched UA-cam videos, practiced on old “spare wheels” until I could do a ok job 😊 then offered it as a service! Learnt a lot from the Aussie guy on UA-cam “the gun man” painter in Australia.
@@everydaydetailing6449 Im a DIY at home, not offering a trade, but have done wheels on my very old trailer and about to do my Daughters 15 year old car, so fun watching your video's. What Spray gun did you buy and are you happy with it? I'm currently spraying a panel on an old Mk1 Audi TT. See what lockdown does for you!
@@adrianphotovisions2308 Hi I use an ANI mini gun bought from spray guns direct .om (uk) 1.2m jet, will spray thin primer/base/top coat around £75 ish from memory :) real work horse.
@@everydaydetailing6449 Ah, just missed your reply and pressed the buy button on the Devibiss FLG5. Even though my first gun was not cheap, like £20, I wasnt happy with the results. The FLG5 has had rave reviews for its price and even from your favourite Gunman!
Nice job again. It seems like I can hear your mouse click everytime you start and end a voice-over section haha
Yes 😂 I had a comment last video ... I did try “noise deduction” will look into this further .. editing is very new to me 👍
@@everydaydetailing6449 You do an amazing job at all your details and keep it up and I was going to ask you how long did the polishing take of the car?
Hi - how can we get in touch? Got a 2009 X5 that needs your skills....
Hi thanks for the offer, but full client base at the moment :)
Ok 👍 I’ll keep getting my fix from the videos - loving them! If you ever get space on that client list for a one-off customer, let me know 🧼 🧽
R u making profit tho ?
Yes I make a living ... just not a huge profit 😀
Where are you based bro? Do you have a website?
Hi
South east UK :)
No website as I don't look/need new clients at this time :)
Every Day Detailing are you near London
13:00 song ?
Excellent detail, but you're really selling yourself short at £300.
Thanks Stephen :) looking at prices
How much do you charge for a job like this
Says in the video and thumb nail 😉
Every Day Detailing ohhh sorry I didn’t notice it in the thumbnail 😂🤦🏼♂️
Great channel! Move to a better camera and you will be lit!
Working on it!
Needs better editing as well :)
In truth though as a smaller youtuber .. sometimes you upload a high quality video and it gets squashed quite a bit .. larger channels get higher resolution :)
How can I contact you for a bmw e60?
Hi sorry I already have a full client base :) thanks for asking.
Every Day Detailing let me know when you have time I have a bmw that I really love and don’t want it to sell but it needs a detailing
Where are you based?
South east England
Every Day Detailing I could do with someone actually, are you unit based or mobile?