Hello. I have a fx impact m3 sniper .30 with the old power bolck (early 2022 year) but I have a friend who owns the same with the new power block. But I do not see much difference with the power (same setting). Can you explain to me the difference between the two? THANKS.
I’ve seen a few people valve rods break where the hammer hits it. I was thinking this new fancy stuff is just going to compound this issue. Is there a fix for that in the works?
I did not you him tighten the "plug"... Gonna fix my kit today !! Thanks Huma air ! Just wonder if the tungsten hammer needs the spacers i guess not because 2 was already tight on the M3 people also said you only need one. If you put 2 on the M3 the chance is likely if you put the power wheel to 16 you won't get the micro adjuster to 5 anymore...
I recently added the 35 tensioned barrel kit, which is awesome. I was about to add the Huma Slug Power V2 Cal .35 Tuning Kit. While taking the bottle off, the air in the rifle drained by itself? Red flag? Anyway I proceeded to add the springs and when loaded the bottle, air was rapidly draining. So I thought maybe the AMP reg. had a Huma Gen 3 that I got for the 35 cal., so thought I'd install that once I checked the O-ring in the block. The O-ring had a hole in it. So I replaced it. Also, you'll notice there is deterioration or corrosion on the threads. Is that causing the leak out the power block?
Hi Dear Ernest . I can't find any article about deference of ordinary and power block , except for valve housing . may you please be so kind to let me have the details ? thank you and bests .
11:55 minutes valve head travel length was before 6mm to 6.5mm in previous model right now 5.5mm ?🤷🏻🤔 In my experience I install te barrel first so that the top housing is aligned properly before tightening down the top guide plate. And with my finger I touch each and every before tightening weather it’s aligned or not. ✌🏻
Tell me Ernest my friend,how is the issue with FX IMPACTS solved,many people has it,when gun sits for a half of a day or couple of hours and velocity gun drops around 50-100 fps,then it stabilizes after 5-10 shots,its the problem with oring and the valve since MK2,have MK4 same issue...
Hi there may I ask question ,how can I check if I have already on my sniper the stronger power block kit .There is no any number on power block .I buy mine in 2022.thx for answer .
Ernest i wonder, how did you install the transfer port inside with 2 O-rings mounted on it and there is one o-ring inside the power block, those are 3 sir, i have problem replacing the oring inside the barrel housing in the power block...its insane just, i need your help please is there any method or tool, ty
My kit is the one where the valve housing has no o rings where as the other or previous one had four. My block has 3 o rings that go in bottom of block and one in the top of the block. My question is there is no orings on the new housing that goes through the plenum. The kit included 4 total o rings but all those go into the block. Just trying to understand how it seals from housing to plenum since the new housing has no orings. Thank you
what is the real factory measurement for c1 or valve seat adjustment I have .30 caliber no to much information some people say 5.5 mm some say 6 mm I want to make sure thanks
Finaly got my kit... but though i was verry carefull and lubes al the rings and everything that had to slide in i still crewed th big o-ring where you screw the plenum apart from the front side. Damn those edges are sharp... I gonna have to buy one here in the local store because it could take a while to order it from fx... To bad it is saterday evening now shop is closed for 2 days... pfff
Hi, how many o rings do I have to put in the rear block? My kit came with 2 different size o rings with 3 rubber balls and another package with 4 orings the same size. Thanks
I’m wondering if you should use power tool on aluminum not good for owners of the FX will use power tool and strip the screws. Always use quality hand tools. Great job thank you.
They should have the common sense to use tools with torque settings so they don;t strip or else a low powered one so you can crack off by hand and unscrew by power. Mine is excellent and does not have the power to strip but brilliant to unscrew all them millions of screws.... it was also as cheap as chips, usb charged.
My fx mk2 leaking air from rear block when i fire and the plenum pin coming out from it can you please help me Because in there is no any fx air gun specialist
Ernest- i installed the power block kit and tungsten hammer on my M3 .30 (8 months old) - my C1 sticks out 8.4mil from block. the C1 is screwed all the way down on the rod until it is stopped. Is this correct? i cannot make it any shorter to reach your stated 5.5mil?? Help- thanks, great video.
Dear FX - Airguns Team, i wanted to ask if you can please tell me where to find a manual for the verminator mk 2 extreme arrow system. I need to know how to take care about my verminator and how to handle everything properly while having it only laying around, etc. Much Appreciated!
Too many upgrades since the impact was first introduced that I can't krep up with them.(most of them are thanks to Ernest if I'm not wrong) I guess it has just been around a year and here is a new upgrade. I can't even decide is it good or bad. Do the upgrades show that this gun is open for improvements or is it poorly designed that it gets so many upgrades? Anyway I have a Mk1 and try to stick with it as much as I can and see what else will FX come up with.
Most upgrades are incremental, some have bigger impacts to performance and or efficiency like this power block. FX is constantly pushing the boundaries of what’s possible with Airguns. If you like to do the same then the impact is a worthwhile investment. I have thousands and thousands of rounds of slugs and pellets and I personally haven’t had a problem with my MK II yet. It really is an incredible tool.
@@tripleceas Thanks for the comment. I have just upgraded my gun with first version of power plenum, Huma regulator, dual hole transfer port and pellet probe yesterday ( I ordered them almost two years ago and I just had opportunity to install). As a result %30 increase in power is very satisfying for me and I am happy with my FX and upgrades however, from the time I bought the parts to the moment I assembled them, Fx released power plenum 720, power block and so on. So I just hope these incremental upgrades are not just to make more profit. Economically I can't keep up with them and spending that much also doesn't seem reasonable for me anymore.
Hoping Ernest Roe will respond. I have a power block that I want to install....The O-rings are in a bag...there are 4 of them....The current schematic is not for the power block in kit #20845...need the schematic to see where to put my o-rings
So the pre-2022 Power Plenum 720 (FX10337) isn't compatible with the new valve housing for the Power Block?! The "normal" 720 plenum has no O-Ring inside since the O-Ring is positioned on the valve housing. So whats the new part number of the Power Block compatible Plenum? Can someone please shed a light?
Goog guide. But... No need to remove valve rod head to change power block if need not to change the hammer spring...lol... You dont show the differentiate with the others model. I must care the alignment before I tighten housing support...lol
@@MasonStormSunny their hydraulic tubing liners have more negative impact to the company than what Ernest is using as a bench to hold up that gun. They don't represent Atlas.. they represent FX.
FX offer terrible service and low quality products! Here's a real response from FX Support after I purchased a faulty "Power Block" version of the Impact and the dealer refused to help: "The support will be closed for summer holidays 16:th of July to 15:th of August" This is 100% true!!!!
That's just Europeans. How faulty could it have been? The only change is in the silk screening on the block and the stainless valve housing has fewer milling operations around its circumference and a slightly larger bore, the block is the same except rubber ball magazine retention pocket count is down 2. Now that i have one, i shouldve kept the old block on and spent the money on slugs. A heavier 14.4g huma hammer weight and stronger hammer spring is all i needed to get 1000 fps 31 grain slugs. Fx is really good at marketing right before an update is coming out and clearing out old parts. Wait a year before you buy anything new from fx (as ive learned). Unless you just enjoy tinkering like i do.
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
FX needs customers to have a whole workshop? That should be highlighted on the manuals.🤗
I don't have this gun,...yet,... but this is like watching CNC machining videos. Grab the popcorn,.... drink some coffee,.. ASMR
This is so much more complex than the FX Maverick. I'm an extremely happy Maverick owner 👍
It is Nice some presencial workshops , 200 , 300€ for lessons How to dismount , mounts and service the various brands , Nice vídeo .
Thank you for your most comprehensive tutorial instructions Mr. Rowe. Most excellent.
Great vid , nice pace , systematically carried out , thanks
Great video Ernist , thank you !
Skills! 👍 Really nice to watch a skilled craftsman use his tools!
Hello. I have a fx impact m3 sniper .30 with the old power bolck (early 2022 year) but I have a friend who owns the same with the new power block. But I do not see much difference with the power (same setting). Can you explain to me the difference between the two? THANKS.
I’ve seen a few people valve rods break where the hammer hits it. I was thinking this new fancy stuff is just going to compound this issue. Is there a fix for that in the works?
I did not you him tighten the "plug"... Gonna fix my kit today !! Thanks Huma air ! Just wonder if the tungsten hammer needs the spacers i guess not because 2 was already tight on the M3 people also said you only need one. If you put 2 on the M3 the chance is likely if you put the power wheel to 16 you won't get the micro adjuster to 5 anymore...
Can you do a video on how to install the left hand magazine kit? Please 🙏
What valve rod is not at the end of Power Block? How can you adjust that?
What do you mean exactly?
I recently added the 35 tensioned barrel kit, which is awesome. I was about to add the Huma Slug Power V2 Cal .35 Tuning Kit. While taking the bottle off, the air in the rifle drained by itself? Red flag? Anyway I proceeded to add the springs and when loaded the bottle, air was rapidly draining. So I thought maybe the AMP reg. had a Huma Gen 3 that I got for the 35 cal., so thought I'd install that once I checked the O-ring in the block. The O-ring had a hole in it. So I replaced it. Also, you'll notice there is deterioration or corrosion on the threads. Is that causing the leak out the power block?
Hi Dear Ernest . I can't find any article about deference of ordinary and power block , except for valve housing . may you please be so kind to let me have the details ? thank you and bests .
11:55 minutes valve head travel length was before 6mm to 6.5mm in previous model right now 5.5mm ?🤷🏻🤔
In my experience I install te barrel first so that the top housing is aligned properly before tightening down the top guide plate. And with my finger I touch each and every before tightening weather it’s aligned or not. ✌🏻
Tell me Ernest my friend,how is the issue with FX IMPACTS solved,many people has it,when gun sits for a half of a day or couple of hours and velocity gun drops around 50-100 fps,then it stabilizes after 5-10 shots,its the problem with oring and the valve since MK2,have MK4 same issue...
Hi there may I ask question ,how can I check if I have already on my sniper the stronger power block kit .There is no any number on power block .I buy mine in 2022.thx for answer .
Você fez a troca do power plenum e o bloco. pelo novo sistema Power Block Kit. essa troca melhora em que a FX impact mklll
What’s the O ring size for inside the plenum. Mines missing it
Ernest i wonder, how did you install the transfer port inside with 2 O-rings mounted on it and there is one o-ring inside the power block, those are 3 sir, i have problem replacing the oring inside the barrel housing in the power block...its insane just, i need your help please is there any method or tool, ty
Is that a metal O-ring inside the Plenum or a regular O-ring? I just got mine today, and I got 4 O-rings but those go in the the block. Thank you
Inside the plenum where the valvehousing goes true is a normal rubber oring . So 4 orings is right , 3 for the block and 1 for the plenum .
My kit is the one where the valve housing has no o rings where as the other or previous one had four. My block has 3 o rings that go in bottom of block and one in the top of the block. My question is there is no orings on the new housing that goes through the plenum. The kit included 4 total o rings but all those go into the block. Just trying to understand how it seals from housing to plenum since the new housing has no orings. Thank you
What is the harm in dry firing it to degas the plenum?
Hammer Hits the valve to hard and damages it
HEY FX. We need a video showing how to install tungsten hammer in the Panthera please.
Hey. Went i turn de bottle off de 2 reg also empty what than de problem .
what is the real factory measurement for c1 or valve seat adjustment I have .30 caliber no to much information some people say 5.5 mm some say 6 mm
I want to make sure thanks
6:46 in my power block the o-rings are 3 and one for the barrel… why Ernest said 2 o-rings?
这阀门怎么工作的？
Finaly got my kit... but though i was verry carefull and lubes al the rings and everything that had to slide in i still crewed th big o-ring where you screw the plenum apart from the front side. Damn those edges are sharp... I gonna have to buy one here in the local store because it could take a while to order it from fx... To bad it is saterday evening now shop is closed for 2 days... pfff
Hi, how many o rings do I have to put in the rear block? My kit came with 2 different size o rings with 3 rubber balls and another package with 4 orings the same size. Thanks
Have you ever figured this out?
hi my impact has no air in power block can u help me fixing it.
email in please with details of your discrepancy serviceusa@fxairguns.com
What size spacer washer do you put in there i thimk my kit came with 2. Do you use the thicker one?
How do you remove shroud from the barrel?
I’m wondering if you should use power tool on aluminum not good for owners of the FX will use power tool and strip the screws. Always use quality hand tools. Great job thank you.
They should have the common sense to use tools with torque settings so they don;t strip or else a low powered one so you can crack off by hand and unscrew by power. Mine is excellent and does not have the power to strip but brilliant to unscrew all them millions of screws.... it was also as cheap as chips, usb charged.
My fx mk2 leaking air from rear block when i fire and the plenum pin coming out from it can you please help me Because in there is no any fx air gun specialist
But oring 3 mm × 20
Hay sar I need to upgrade my mk1
Ernest, when you say 5.5mm measurement at the C1, where are you measuring? Thanks.
Hello. My seller says that the FX M3 sold in 2022 are already equipped with the new power unit. How do you know if it's true?
You can call in or on our Instagram at FX Airguns USA. We posted a picture of the two different models.
So if c-3 isn’t 5.5mm pretty hard to get same tune as others then.
Great video 👍👍👍👍👍
Ernest- i installed the power block kit and tungsten hammer on my M3 .30 (8 months old) - my C1 sticks out 8.4mil from block. the C1 is screwed all the way down on the rod until it is stopped. Is this correct? i cannot make it any shorter to reach your stated 5.5mil?? Help- thanks, great video.
Dear FX - Airguns Team, i wanted to ask if you can please tell me where to find a manual for the verminator mk 2 extreme arrow system. I need to know how to take care about my verminator and how to handle everything properly while having it only laying around, etc. Much Appreciated!
Hi I have a question, where do I find the second power block big screw?
@SoundWav Wizard Yes, I mean the big screw behind the pressure clock
Thank you
I have a little longer spring that i bought for better hammer action a while back. Is this spring better or should i use the spring with the kit?
Do they make the power block and hammer for the 35 caliber yet?
They are selling 35's with the power block, so I would assume it's the same kit that is on the other calibers.
sure hope we can buy them soon lol get them coming already
That is a nice video Can we do that on FX impact mk2 ?
Is there a way to remove the C1 without having to buy the tool?
I used a 1.5mm hex key in the one of the holes in the side, worked perfectly.
Too many upgrades since the impact was first introduced that I can't krep up with them.(most of them are thanks to Ernest if I'm not wrong) I guess it has just been around a year and here is a new upgrade. I can't even decide is it good or bad. Do the upgrades show that this gun is open for improvements or is it poorly designed that it gets so many upgrades? Anyway I have a Mk1 and try to stick with it as much as I can and see what else will FX come up with.
Most upgrades are incremental, some have bigger impacts to performance and or efficiency like this power block. FX is constantly pushing the boundaries of what’s possible with Airguns. If you like to do the same then the impact is a worthwhile investment. I have thousands and thousands of rounds of slugs and pellets and I personally haven’t had a problem with my MK II yet. It really is an incredible tool.
@@tripleceas Thanks for the comment. I have just upgraded my gun with first version of power plenum, Huma regulator, dual hole transfer port and pellet probe yesterday ( I ordered them almost two years ago and I just had opportunity to install). As a result %30 increase in power is very satisfying for me and I am happy with my FX and upgrades however, from the time I bought the parts to the moment I assembled them, Fx released power plenum 720, power block and so on. So I just hope these incremental upgrades are not just to make more profit. Economically I can't keep up with them and spending that much also doesn't seem reasonable for me anymore.
Mungkin saya akan punya setelah FX merilis generasi ke 4 😅
What is the difference M3, MK-II and M3 power block? Sir
Powerblock is only to generate once again more money, whats wrong with the original block...no problem to operate on the desired pressure.
Hoping Ernest Roe will respond. I have a power block that I want to install....The O-rings are in a bag...there are 4 of them....The current schematic is not for the power block in kit #20845...need the schematic to see where to put my o-rings
Did you find the answer, sir?
@@nikanim Yes I did thanks
@@butchlanders5021 could you please share. I’m at the point you were 11 months ago…?
★★★★Thank you so Much, #Excellent ▪︎▪︎Best Regards from South America Chile 🇨🇱👏👏👏🍻🍻🍻●●Pj●●
How much brother ?
Seems like one of those times where you would definitely not want use an electric screw gun.
What's the point about Power block ?
New Block On the Kit 🤣
Please try to include the set screw in your upgrade kits 🙄🙄🙄
Tried 3 times and leaked anytime. 3 new valves and delrin valves.
Any chance I could pay you to tune my M3?
Please call our technician department.
Contact
Monday - Thursday 9 AM - 4 PM EST
Fridays 9 AM - 3 PM EST
Phone: +1 866 639 0772
serviceusa@fxairguns.com
@@FXAirguns It seems they only answer it they smell money🤣
Ernest is very careful not to leak information about the size of the output hole of valve housing 😁😁
😂
It's 6.2 mm
very imprssive❤❤❤
So the pre-2022 Power Plenum 720 (FX10337) isn't compatible with the new valve housing for the Power Block?! The "normal" 720 plenum has no O-Ring inside since the O-Ring is positioned on the valve housing. So whats the new part number of the Power Block compatible Plenum? Can someone please shed a light?
amazone 👍
Goog guide. But...
No need to remove valve rod head to change power block if need not to change the hammer spring...lol... You dont show the differentiate with the others model. I must care the alignment before I tighten housing support...lol
Fredrik has McLaren and cannot afford an original Atlas bipod? You use a counterfit in this video.
I have the same knock off. Works great. Why pay more?
@@picklefart true but not in the ad, man.
Hes not Frederick
@@treeassassin but he has a direct connection with FX owner and he impacts the company image.
@@MasonStormSunny their hydraulic tubing liners have more negative impact to the company than what Ernest is using as a bench to hold up that gun. They don't represent Atlas.. they represent FX.
It looks like you have to take the whole gun apart. You probably better buy it all assembled.
FX offer terrible service and low quality products! Here's a real response from FX Support after I purchased a faulty "Power Block" version of the Impact and the dealer refused to help: "The support will be closed for summer holidays 16:th of July to 15:th of August" This is 100% true!!!!
That's just Europeans. How faulty could it have been?
The only change is in the silk screening on the block and the stainless valve housing has fewer milling operations around its circumference and a slightly larger bore, the block is the same except rubber ball magazine retention pocket count is down 2. Now that i have one, i shouldve kept the old block on and spent the money on slugs. A heavier 14.4g huma hammer weight and stronger hammer spring is all i needed to get 1000 fps 31 grain slugs. Fx is really good at marketing right before an update is coming out and clearing out old parts.
Wait a year before you buy anything new from fx (as ive learned). Unless you just enjoy tinkering like i do.
Cry me a river