Я бы не стал пользоваться этим,опасно.Может заклинить доску, её диск поднимет и сломает ключицу или в голову прилетит.Умные люди придумали гребёнки,их несложно сделать.
What a breath of fresh air over most of the other "woodworking" channels that are little more than schills for the companies with the latest&greatest geegaws. I love making my own. This is a great idea. Immediately subbed. Thanks.
OK, I have seen a lot of these types of videos, but this is the first time that I have said to myself that "I will be making one of those"! Very impressed.
Le suspense "à quoi servent les roulettes ?" est maintenu jusqu'à la fin. Des talents de cinéaste assurément en plus de ceux en ingénierie ! Le maintien de la pièce semble sans faille sur la table de sciage, là où un appui par la force humaine pourrait faiblir ponctuellement où être excessif. Félicitations !
An over-engineered re-imagining of a simple featherboard. Too much time and work invested for the result. Obviously just something built to post a build video, not to be a real, useful item.
@@MA-SH Thanks for the clarification. It will be interesting to use a one-way bearing for this so that objects can't be thrown back at the operator in the event of a kickback.
@@MA-SH Actually if you replace the roller bearings with a feather board , you might have something that's both useful and safe! Nice work all the same
"Твори, выдумывай, пробуй!" Есть такое высказывание в русском языке. Можно принять как девиз. Появилась идея. Обдумал. Реализовал. Сделал качественно. Это важно. Найдёт ли это приспособление место у мастеров? Никто не знает. Время покажет. Придумать что-то - дорогого стоит.
I don’t understand why he place the pusher’s stick close to the fence that’s why when the piece at the end go to the left should be in the center and pushed to the the right to the fence like that you keep you piece in place
And what happens if the board is not straight and increases in width? You losen the jig while sawing? Way too dangerous and I stay with my featherboard or simply two pushsticks
This tool only works if the piece you're cutting has parallel edges. Often, you run a piece through the saw to GET those parallel sides. If those sides are not perfectly parallel, it will either bind up, or lose it's pressure. Then, what??
@ roller bearings guides can guide both ways. A properly set featherboard won’t let your stock back up. Your device is technically a roller guide. You can mount a feather board on your fence as a hold down which is very important when beveling. Mine are mostly just pine 1X.
Hi MA-SH Do not bother about the comments made over the silliness of your "featherboard". I am sure that most of the commentators are not inventive enough to see the New Idea behind your tool. Not always the same over and over again. One who works a lot with strips will appreciate the high flexibility without changing anything, no screw, no fastener... while changing the workpiece. Take it from someone with 45 years shop experience. 👍👍
@MA-SH Мой пост не для Вас!🤓 А для, тех, кто дорожит своим временем. А Вы, вместо того, что бы за минуту всё объяснить и показать, растянули на 6 минут, увеличив время просмотров, и ваш авторитет на ютюб, за наш счёт нашего времени. У каждого кто посмотрел весь ролик, вы украли по 5 минут.
@MA-SH Не навязываю! Высказываю своё мнение всего лишь! И уверен, мои слова правда даже для вас! Ваша цель не донести информацию, а набрать максимальное время просмотров. Именно поэтому вы целенаправленно растягиваете ролики!🤣 Удачи вам!
Great video, very good and meaningful, thank you for sharing
Thanks, I appreciate it 👍
Lass Dir diese Idee Patentieren sehr gute Idee, vor allem für schmale Zuschnitte.
Hello 👋 Thank you 🫶
Kibitzen zein sitzen. Wyscie mieli lepsze pomysly, np. Ziklon B...
@@dariuszreda3291 😊
Отличный упор , спасибо за видео.
Здравствуйте Михаил 👋Огромное вам спасибо! С наступающим новым годом 🎄 🤝🎅
This is such a creative and impressive idea It is amazing what can be done with just a piece of wood Thank you for sharing this brilliant project
Thanks so much, I’m glad you enjoyed it. 🙏🫶😊
Я бы не стал пользоваться этим,опасно.Может заклинить доску, её диск поднимет и сломает ключицу или в голову прилетит.Умные люди придумали гребёнки,их несложно сделать.
@@СергейФ-я4ч with a head like yours it would definitely miss it.
What a breath of fresh air over most of the other "woodworking" channels that are little more than schills for the companies with the latest&greatest geegaws. I love making my own. This is a great idea. Immediately subbed. Thanks.
как же русы палятся в своих каментах, когда пытаются в английский
Thanks so much, I really appreciate that! 🫶
Ottimo suggerimento. Ottima idea ❤
Hello 👋 Thank you my friend 🫶
“Featherboard” over-engineered.
🫶
Ma che stupidaggine
That is very slick. Totally impressed.
Hi 👋 Thank you 🫶
useful for setting your fence as well.
Absolutely!🫶
Thank you for this, brilliant idea. Would it be possible to make this using 19mm plywood laminate together to create the desired thickness.
Yes friend, thank you 👍
Hello MA-SH beautifully done
Hello my friend! Thank you 🤝
🎉🎉 sweet
Thank you 😊
Very good job brother!!!
Thank you! Cheers!🫶🎅
Estaba todo integrado para que eran los rodamientos 😂😂, Buena idea 👏👏👏👏👍👍 gracias por compartir
Thank you 👍
Super, il suffisait d'y penser et vous y avez pensé. Bravo.
Un grand merci !🫶🎅
Отличное решение!!!! Жирный лайк!!!
Спасибо Анатолий Михайлович , жиру за праздники прибавил столько, что тяжело сбросить 😅 а тут и лайк жирный!)
Excellent idea, I love this !
Thanks for watching!👍🫶
Sehr schöne Idee, sehr gut gemacht 👍🏻
Danke für das Lob!🫶👍
Excellent idea!!!
Thank you! Cheers!
Idea Super...😊😊😊
Gute Idee, die man auch einfacher hätte umsetzen können.
How?
Die besten Wünsche für das "Neue Jahr" mit weiteren guten Ideen (!) 🤝🤝💖💖
Wünsche ich dir auch🫶🎅
Genial 👍👍👍
Thank you 🎅
OK, I have seen a lot of these types of videos, but this is the first time that I have said to myself that "I will be making one of those"! Very impressed.
Thanks! Let me know how it goes!🫶
Sangat menginspirasi anda sangat terampil, 👍
Thank you bro 🫶
Cách làm rất hay ❤
Hello 👋 Thank you bro
Great video I like wood working tips 👌🏻 ❤❤❤❤❤❤❤❤❤❤❤❤❤❤
Thank you for Great video 👌🏻👍⚘️
So nice of you😊
Le suspense "à quoi servent les roulettes ?" est maintenu jusqu'à la fin. Des talents de cinéaste assurément en plus de ceux en ingénierie ! Le maintien de la pièce semble sans faille sur la table de sciage, là où un appui par la force humaine pourrait faiblir ponctuellement où être excessif. Félicitations !
Hello my friend 🤝Thank you so much 😊 Happy new year 🎅
MM77 Approved 👍🏼 👍🏼
Thank you bro 👍
Hope you and all your family have a great new year when it comes around Alexander, enjoy.
Hello 👋 Thank you my friend, happy new year 🎅
Bravo ! super ! je vais en fabriquer un, merci pour le temps passé et l'échange.
Avec plaisir 😊
Шикарное решение😂🎉🎉🎉
Спасибо, с новым годом 🎄 😁
Grande idea. Scusa , ma che legno hai usato?... grazie
Hola, muchas gracias! Haya y Fresno
Grazie molte. 👍
@gianlucabaldessari4134 👋
so great❤️❤️❤️
Hello 👋 Thank you 👍
Idea buena. Pero buscaría un sargento de mejor calidad. 😜
Hello 👋 Thank you brother 🤝
Hola.. y perdón.. por mi ignorancia.. pero para qud sirve esta herramienta..?
😊
Super idea! 👍💪✌
Hi, thank you my friend 🎅
Au début je ne voyais pas où il voulait en arriver avec son bricolage, à la fin c'est bluffant 🙂
😊Thanks 🫶
Good job 😊🎉
Thanks 😁
An over-engineered re-imagining of a simple featherboard. Too much time and work invested for the result. Obviously just something built to post a build video, not to be a real, useful item.
Ok, thanks
Funktioniert nur, wenn das Werkstück auch exakt parallel ist... 😉 Da machen die verstellbaren Federklemmen mehr Sinn...
Guter Tipp!🤝
Здравствуйте 🤝Александр!предновогодний Лайк 👍естественно и безоговорочно!!!
Здравствуйте, Владимир! Огромное спасибо! С наступающим вас праздником 🎅
Получилось впн установить 📲?
@@MA-SHнет так просмотрел, довольно неплохо загружается
@@MA-SHвас так же с наступающим🤝
🤝
Brilliant!!!
Thank you my friend 🎅
@ the things belong to you! I will be making one of these as soon as I get home!!!
@@jachconi Ok friend 👍
It's very clever, but so much work when a feather board would work just as well.
Thank you for the feedback! 👍
Yeah, why make something with your own hands when you can go out and pay some corporation to make a much cheaper, less impressive version?
Who's bothering you, go pay
A friend of mine would still have the tip of his thumb if he had had this years ago! Awesome idea BTW !
Sorry to hear that, thank you 👍
@@MA-SH He didn't lose that much 😶
😊
😂.. I thought it was a wooden, Drop in Trigger for an AR platform Rifle!.😂….😉🤙🏻…
😂🫶
Ah like a featherboard... but better.
Thank you 👍
I'm trying to figure this out but maybe someone can enlighten me. Does this offer any protection against kickbacks?
Hello 👋 Yes friend 👍
@@MA-SH Do the bearings run in only one direction?
@@AyoolaBoyejo Now I understand you, they rotate in both directions.
@@MA-SH Thanks for the clarification. It will be interesting to use a one-way bearing for this so that objects can't be thrown back at the operator in the event of a kickback.
Yes, that would be great.
Hello 👋 good 👍 😊
Hello 👋 Thank you so much 😊
Very clever.
Hello 👋 Thank you
@@MA-SH Yes, Sir, you bet!
Das baue ich nach👍
Hello 👋 Thank you 🎅
Could be used as a thin rip jig too. Registering the thickness against the rollers and moving the fence with stock against it each cut
Yes, I think you are right! 😎
utterly pointless
Thank you 😊
Mrhokey gets a thank you for his comment! Haha
Why say that?
@@markhedquist9597he's not wrong, though. All corners are round 😂😂😂😂
The point was to get people to watch! 🥴
"Расческа" удобнее, практичнее, безопаснее, более правильнее
Ришат с наступающим новым годом 🎄 такую я уже делал 👍
A featherboard is quicker to build, allows for more consistent pressure and slight variations in the board width, and prevents kickback.
Ok, thanks! Happy new year 🎅
Nice contraption but I dont see the need..........
Hello 👋 Thank you 😊
Then don't make one,,, simple really!
@@TheMakersMarkTSF ok bro
I likes it
Thank you 👍
Молодца парень
Здравствуйте, с наступающим новым годом 🎄 😊🤝🎅
Cute idea but not as safe as a feather board as it will not prevent kickback which is the main reason for such a device
Ok friend 👍Thanks 🤝
@@MA-SH Actually if you replace the roller bearings with a feather board , you might have something that's both useful and safe! Nice work all the same
Das brauche Ich. Wird sofort nachgebaut.😊
Hallo 👋Vielen Dank!
Perfekt!!!
Thank you sir 🤝
When you drill the hole, if you used a step bit, you would get a cone shaped hole that might amplify even more.
That's a great point! 👍
Clever.
Thank you 😊
Muy chévere
Thank you 👍
For full functionality, there is no flexible mounting.
Спасибо
brilliant
Thanks 🫶
"Твори, выдумывай, пробуй!"
Есть такое высказывание в русском языке. Можно принять как девиз.
Появилась идея. Обдумал. Реализовал.
Сделал качественно. Это важно.
Найдёт ли это приспособление место у мастеров? Никто не знает. Время покажет.
Придумать что-то - дорогого стоит.
Здравствуйте, лучше не скажешь 👍Благодарю 😊
테이블쏘는 항상 긴장을 해야하는데 편리성에 안위하게되면 위험할것 같아요
Ok, thanks bro
Подшипники надо делать на пружинах.
Спасибо, с наступающим 🌲
I dont really see the point?
Ok, thanks
I don't do wood work or carpentry and I see the logic of safety to this, maybe you don't believe in safety.
The fact that you can only just squeeze the clamp with two fingers is a major drawback to the design. Needs some improvement IMHO
Apparently you don't know the quick-release clamp device! I pressed the button, only after that it can be compressed!!
I don’t understand why he place the pusher’s stick close to the fence that’s why when the piece at the end go to the left should be in the center and pushed to the the right to the fence like that you keep you piece in place
Ok, thanks bro 👍
And what happens if the board is not straight and increases in width? You losen the jig while sawing? Way too dangerous and I stay with my featherboard or simply two pushsticks
Ok bro, thanks 👍
This tool only works if the piece you're cutting has parallel edges. Often, you run a piece through the saw to GET those parallel sides. If those sides are not perfectly parallel, it will either bind up, or lose it's pressure. Then, what??
This is a prototype, if I come across it, I will finalize it.
👍👍👍👍👍
🫶😊
Say what is in the description
Ok, thanks
Это не идея, идеи не материальны. Идея - это мысленный прообраз.
Спасибо Всеволод 🤝
You were very bored. Must have been snowed in.
Yes friend 🎅
A feather board has the advantage of being one way avoiding kickbacks
Thank you 🫶
Then you haven't understood the use of a featherboard.
@ roller bearings guides can guide both ways. A properly set featherboard won’t let your stock back up. Your device is technically a roller guide. You can mount a feather board on your fence as a hold down which is very important when beveling. Mine are mostly just pine 1X.
@@peterbarlow8912 Ok, thanks bro 👍
Einen Aufwand-Nutzen-Vergleich mit einem Spanner aus dem "Sonderpreis-Baumarkt" darf man aber lieber nicht anstellen ... 😇😇😇🥴🥴🥴
Hello 👋 Thanks
🙈🤦Et tu fais comment pour déligné une piéce qui n’a pas les deux faces parallèles ??
🤔
Hi MA-SH
Do not bother about the comments made over the silliness of your "featherboard". I am sure that most of the commentators are not inventive enough to see the New Idea behind your tool. Not always the same over and over again.
One who works a lot with strips will appreciate the high flexibility without changing anything, no screw, no fastener... while changing the workpiece.
Take it from someone with 45 years shop experience. 👍👍
Ok, I'm glad it makes sense to someone!Thank you 🤝
Rube Goldberg Woodshop series.
Thank you
Featherboard sind für solche Arbeiten sicherer, da diese denn Kickback verhindern und diese Vorrichtung 0% davor schützt👎👎
Ok, thanks 👍
Buon Anno!!!
Happy new year friend 🤝🎅
😊🤝
😊
🫶😊🎅
what a freaking waste of space
😁👍
Смотри с 4.30
Хорошо, посмотрю 👍
@MA-SH
Мой пост не для Вас!🤓
А для, тех, кто дорожит своим временем.
А Вы, вместо того, что бы за минуту всё объяснить и показать, растянули на 6 минут, увеличив время просмотров, и ваш авторитет на ютюб, за наш счёт нашего времени.
У каждого кто посмотрел весь ролик, вы украли по 5 минут.
А-а-а-а, так смотрите shorts!
Ваш пост не кому не нужен 😂 не навязывайте ваше мнение другим !
@MA-SH
Не навязываю!
Высказываю своё мнение всего лишь!
И уверен, мои слова правда даже для вас!
Ваша цель не донести информацию, а набрать максимальное время просмотров. Именно поэтому вы целенаправленно растягиваете ролики!🤣
Удачи вам!
@@MA-SH
Я не в обиде на вас.
Вы не едины на просторах инета.
Ваша цель здесь - контент.
Желаю развития вашему каналу!
Ну и нафиг эта шляпа? Лиж бы выложить бесполезную хрень!
Шуруп😂
Com o perdão da franqueza, dispositivo totalmente desnecessário.
Thanks for the feedback! 👍
Or you could just get a feather board and probably save money and a ton of time. Completely useless build.
Ok friend, thanks 👍
Ez nagy hülyeség! Fésűfa kell oda és az tökéletes!Ilyen fixszorítós marhaság nem jó semmire!
Ok bro
And why? Unnecessary, expensive, complicated.
Ok, happy new year🎅
Maybe this should be spring loaded in some way
🤔👍
WoodPrix woodworking plans are nice for that.
Thank you 👍
Idea Super...😊😊😊
Thank you 🎅🫶