I remember the question on using the white fittings vs. bending the tubes. You made the right call in using the fittings; it gives the rig a more industrial vibe.
That mobo sounds like a good candidate for a Northridge Fix collaboration. I'd be interested in seeing what happens in that situation and what it would take to fix it. We all make mistakes, it's always a good feeling to fix something you broke. It's very possible it just blew a fuse.
Northridge fckups? the dude destroying customer boards and then charging them a no-fix fee and banning anyone pointing out that he destroyed it? he's a clown at best 🤡
@@shadowwolf2608 I third an attempt to repair the board. It's always so easy just to throw something away in today's world when instead a lot of these things may only need some minor repairs in order to fix it. Such a shame to just throw $300 away when it may only need a few bucks in order to get it working again.
Nrf can't fix sh*t. He only fixes bad ports and traces. Good soldering skills but too little knowledge how modern electronic works. The psu not starting means pson signal dead - chipset dead.
I never get tired of Phil's montages. Excellent work! As for the "stupid mistake", there's been more than a few times where I ended up regretting an 'improvement' that wasn't necessary.
Even someone with a crap ton of experience makes bad mistakes… it happens to everyone. Like how you were honest with your friend as well, much respect love your videos.
I don't blame your friend for liking those fans. I picked up some just to replace my Corsair 120s which felt like they were gathering dust more than any other fans I've ever had, and they just look great. The accent lighting is so clean on the white ones, and I think even I'm hooked.
@kylepinder6.7 Don't think you'll regret your decision. It's also nice when you can reduce the number of cables thanks to the option to snap-in daisychain the fans and just use one wire for power and control~.
sometimes, simply by removing the short the board "come back alive" just because of the board's built in OCP, that might be what's actually preventing the board from booting and dying for real
Such a good looking build and I love the vintage filter on the montage. I fried a SuperMicro EPYC server board and CPU because I didn't finish tightening the CPU down before putting the cooler on. Still feel like throwing up a little when I think about it. The build look super good though. Thanks for taking us along for the ride.
@@jimmy3le9plus cause it shows the reality of facts. I spent the last 30 years building pc and shit sometimes can happen, doesn't matter if you do everything to avoid it.
I agree. It's good to see a creator make mistakes. They aren't perfect and for those who watch his stream, the unexperienced may see this and know to check for that when they are building a computer. It brings the creator into a more relatable experience with the user than one who appears to sit on a pedestal and is perfect.
This is quite possibly my favorite montage you guys have done. I friggin' LOVED the VHS tracking effect in the beginning as well as the rest of the effects, as they went awesomely well with that music you chose. Sick editing Phil!
Mistakes happen... its how you deal with them that makes all the difference.. Also Phil, bangup job on the B roll of the build... liked the tune and just really cool shots and editing!! Thanks you guys for taking us on this ride
It was fun to watch this build take shape and it came out so good! I also like that Jay leaves his mistakes in the videos because that can be more useful for people, they learn what not to do and why you shouldn't do it.
Great job with the build. I also loved how Jay was just walking casually through the montage xD. And Jay, you didn't kill the mainboard, you just prepared something to fix for the Northridge Fix collaboration. 👍 well done!
I don't think the mainboard is dead. There's not a lot on the back that can short and kill it at least in that area where the bracket got stuck. So my guess is it detected a short and just protected itself. Otherwise, sure I would like to see a Northridge Fix collaboration.
12:43 OMG this look Jay, THIS is the look of someone who was completely taken by surprise at how their friend reacted to you telling them their PC is dead! This is a priceless pause xD
"This is gonna be the most boring montage Phil has done" Phil: ya think so buddy? 18:27 Phil never disappoints with his montages and today was no exception!!
I am sorry for all you had to go through. And this is not to pour salt into the wound, but knowing you how knowledgeable you are and meticulous (usually), this clearly happened because you built this PC switching/skipping steps. Which in turn, in my honest noob opinion, is one of the greatest lessons we can take away from all of this. No matter what PC you're building, always go through with all the required steps to avoid these kind of outcomes. Glad everything turned out ok, your friend is super MEGAMANChill and the build looks insanely good. Also, 2000IQ Move with 2nd reservoir. Like holy shit, it's like magic!
I had to learn the hard way too a couple of years ago. Did a build and never worried about booting it before finishing it. Then there I was standing proud in front on it until... Boom no post...
This new version with a hose makes me wish I'd waited until it came out. But I still love the older one that I own. The most important watercooling tool ever. It let me buy used parts with confidence, because I didn't have to wait until I had everything, built it and had it spring a leak onto some paper towel. Imagine messaging a seller after several months... Plus not having to use paper towels saves the environment :P (and your time, no more 24 hour leak tests, even for my anxious ass 30 minutes was plenty)
It is very important you never ever remove any kind of mistake you might make from your videos, it provides us the ability to learn some very important lessons in future builds. Thank you Jay! 🙂
Jay, I do this all the time when building a PC with a custom loop: Take the tubes off the CPU block, grab your blower vac and blast air through the block while you do your initial boot up test. I've actually got a soft tube and fitting that slips over the end of my little blower so I don't have to awkwardly hold the blower while testing. It keeps it cool enough to even boot windows and do basic tasks as long as the blower keeps chugging.
Thank you Jay for the video, now we know what not to do😊. You’ve always kept it real and showed us that even the best of us make mistakes, love that honesty in your videos. The final build is outstanding and just having Megaman as a solo figure in the case and changing the LEDs to make it appear like a level in the game is an awesome look. Appreciate the content you guys put out and props to Phil the montage god!🤘🏻
the montage at the end was awesome. lol jay comes into screen drinking a water bottle and moves out of the way when he notices hes in the shot. lol good stuff. dope build. love the mega man theme.
I love this build, and I'm not one for white computers. Thank you for sharing your successes and failures; it helps me learn what to do and what to watch out for. This build has made me really want to doing PC builds for fun. Normally I just take a case I already have, with parts I already have, then adapt and upgrade. Thanks for always sharing!
I wonder what the Micro Center strategy is behind their rather extensive ad campaigns. Inform every person nation and worldwide about deals they can't get?
@@ferrumregit4252i thought the same, but then I got something from their online store on Amazon in Dec 2024. So maybe that’s changing…and they’re starting to sell more to the rest of us
I am still perplexed that a case in 2023 does not have a motherboard cut out for the rear. When he screwed out the backplate it would just have fallen of and out of the case, not short circuting anything.
2 Things I have to say. 1st. I am loving the build videos. 2nd. The editing and montage footage was awesome. The production of this series was very entertaining. The end build with the flames was sick.
It’s always good to show the mistakes. That’s the part that actually teaches stuff. I’ve took apart and re-built my PC since I was 8. Broke it countless times until I learned what thing goes where. And even now, after all the learning and practice, mistakes still happen. Couple months ago, I took apart the PC to change the case with a more airflow optimised one, and apparently I forgot to plug the sata cable to my SSD with all my stuff. Didn’t show up when re-installing the OS, didn’t show up afterwards, and I’m there like “did it really die?!”, then I opened up the PC and saw I only plugged the power to it, but not the actual cable for data.. 😂
I really think this is a beautiful build, Jay. Your friend is a lucky guy! We all make mistakes, thanks for having the courage to show us you too make mistakes. There is no shame in it and honestly it makes us all feel a little better. Keep up the great work Jayz crew!
Jay has inspired me with my 1st build, Now this! can't wait to build my 1st water cooled build. Thanks for the inspiration Jay! More power to the channel!
Jay, your best friend sound like a smile. around the 9 minute mark you can see the MB die. there is an amber light in the top right of the MB that lit on the 2nd attempt to start it.
SOOOO BEAUTIFUL!!!!!! - AMAZING WORK!!!!!! And PHIL TOO!!! - That montage was EXCELLENT!!! (as always) I am REALLY digging that close up scope thing you got... VERY UNIQUE!!!
This was fun. ... Glad to see Mega Man power up! ... (20:00) Preforming a diode test on the power connectors on the motherboard can diagnose a short pretty quick. Also using a multimeter to preform a DC Voltage test on the PSU or board power connectors can rule out any power problems pretty fast and reliable.
In my newest build, I accidentally knocked a cap off the motherboard with the radiator as I put it in. Didn't figure it out until everything was in and it just wouldn't turn on. Really comforting to know professionals like Jay make human mistakes, too.
love the old retro 80,s theme and the new video montage theme Phil nice one good one. And even the how that PCIE cable run's to the GPU in that direction amazing but so simple. 😀😉😏
My advice remove the mystic fog it is a problem it will separate and clough if not on all the time with high flow, I replaced it with sold white and it is very very close (this is was directly adviced by EK to stop using the mystic fog coolant).
hey jay, being an electrical engineer i can tell you the pins themselves have way more than sufficient specs to carry the power that is required of them and with a large extra buffer. the contact ressistance is the issue of the connectors and not the pins themselves as they have a exceedingly low ressistance by themselves
I'm not usually into slot machine style lighting in computers, but that white/blue lighting theme with the white enclosure and black components looks sharp and timelessly futuristic. First over the top enclosure build I've seen that I would consider replicating.
WOW! Did Jay just admit to being a noob at this? What is the world coming to! 😉😆🤣 Seriously, though. Fantastic looking build! Glad the fix turned out to be easy!!
Very inspiring, I’m debating doing a custom water coolant loop for my first PC build. It will only be cooling the CPU, as I havnt found any water block for my GPU, but your videos are the best on UA-cam. So thanks man
I LIKE THE CABLES!!!!! 😮 How lucky would someone be to have a friend like Jay!!!??? This PC is one of my favorite ones you've done!! 15/10 SIX stars, three thumbs up!!! 😂😂😂 Both my vehicles are white with black accents so you can tell how much builds like this clean speak to me!!!
It's so nice to see that everyone makes mistakes while building. I have built several for friends and family, but this is my worst fear. Two options, cover the cost and lose money when you weren't charging in the first place, or they lose money. It's a lose lose situation.
Jay walking in the background taking a sip of his water bottle killed me during the showcase, I was taking a sip of my soda at the same time thank you for that loll 🤣🤣🤣
Wow what an amazing build. That said, based on only what i already know, i could sell your friend crap in a shitstorm. Love the vids thanks for your time. I'm building my first pc rn so I genuinely appreciate the content and have subbed.
That is a sweet build. It's always good to see you finish one of these, warts difficulties and all! I'm in a Fractal North, which I really like, although it isn't the best choice for a water cooled build. It's going to become a water cooled build.
Great build! Maybe the Ram could be the live/energy bars? If you had used a normal tube res it could have been a dr light capsule with X dashing to it for the powerup.
I love what you did at 19 mins in. That was just hilarious. You have a great sense of humor. I've killed a couple of parts myself. That computer is beautiful. I'm sure he'll love it. I challenge you to do stuff like that in every video and see who catches it. I think it would be a fun experiment. Just don't make it too easy to spot.
I remember building my first PC back in 2000 and I made a big mistake to put all the case screw mounts in and it was shorting the motherboard, luckily it didn't fry it. It was a good Intel Pentium 4 motherboard and it lived for over a decade!
I remember the question on using the white fittings vs. bending the tubes. You made the right call in using the fittings; it gives the rig a more industrial vibe.
Looks visually amazing - one of the neatest liquid systems ever.
I agree. Jay is really good at bending tubes & planning loops, which really sets it a part from all the other builds imo.
I love these bit by bit special builds Jay - Hope you're doing well mate - from Australia
I think Aussies can probably relate to Jayz oddball humour right 😜🦘
@@petermckenzie580 Yes mate, indeed.
19:03 my favorite camera angle that ive seen so far. So glorious, what a great build
That mobo sounds like a good candidate for a Northridge Fix collaboration. I'd be interested in seeing what happens in that situation and what it would take to fix it. We all make mistakes, it's always a good feeling to fix something you broke. It's very possible it just blew a fuse.
I second an attempt to repair the board.
Northridge fckups? the dude destroying customer boards and then charging them a no-fix fee and banning anyone pointing out that he destroyed it? he's a clown at best 🤡
@@shadowwolf2608 I third an attempt to repair the board. It's always so easy just to throw something away in today's world when instead a lot of these things may only need some minor repairs in order to fix it. Such a shame to just throw $300 away when it may only need a few bucks in order to get it working again.
@@DanakarEndeel It might end up being a $5 component, but labor is expensive, could be $200-300 for that alone.
Nrf can't fix sh*t. He only fixes bad ports and traces. Good soldering skills but too little knowledge how modern electronic works. The psu not starting means pson signal dead - chipset dead.
I never get tired of Phil's montages. Excellent work! As for the "stupid mistake", there's been more than a few times where I ended up regretting an 'improvement' that wasn't necessary.
Yep. That's why I don't mess with hardware.
Yeaa... but not as many times as everything worked in the end and I was happy I did it ^^
Even someone with a crap ton of experience makes bad mistakes… it happens to everyone. Like how you were honest with your friend as well, much respect love your videos.
This build is so gorgeous. Glad you admit mistakes you made and how you went through it.
He had to cause who's to say he actually bent 85% of the tubing. It happened off camera and this happens to most of his builds.
I don't blame your friend for liking those fans. I picked up some just to replace my Corsair 120s which felt like they were gathering dust more than any other fans I've ever had, and they just look great. The accent lighting is so clean on the white ones, and I think even I'm hooked.
half the time the rgb on my corsair 120s dont work or flash. just ordered these lian li fans
@kylepinder6.7 Don't think you'll regret your decision.
It's also nice when you can reduce the number of cables thanks to the option to snap-in daisychain the fans and just use one wire for power and control~.
@@Kitsune-Chaos definitely, with corsair its inevitable that you will have a rats nest in your pc. Unless you buy the new $50 fans.
sometimes, simply by removing the short the board "come back alive" just because of the board's built in OCP, that might be what's actually preventing the board from booting and dying for real
Good point, a ray of hope for those like me who wouldn't have a spare MB laying around and would mean waiting on the budget to catch up for a new one.
Amazing build and truly feels like we go through it with the team. This is easily one of the most beautiful builds I've ever seen.
Such a good looking build and I love the vintage filter on the montage. I fried a SuperMicro EPYC server board and CPU because I didn't finish tightening the CPU down before putting the cooler on. Still feel like throwing up a little when I think about it. The build look super good though. Thanks for taking us along for the ride.
It’s good to see Jay make the same mistakes I do at times.
Why is it good to see him make mistakes ?
@@jimmy3le9plusit makes him even more relatable 😊
This. I haven't cooked off a board in 20 years, but I still remember doing it because I cooked the first one I ever installed. >.
@@jimmy3le9plus cause it shows the reality of facts. I spent the last 30 years building pc and shit sometimes can happen, doesn't matter if you do everything to avoid it.
I agree. It's good to see a creator make mistakes. They aren't perfect and for those who watch his stream, the unexperienced may see this and know to check for that when they are building a computer. It brings the creator into a more relatable experience with the user than one who appears to sit on a pedestal and is perfect.
This is quite possibly my favorite montage you guys have done. I friggin' LOVED the VHS tracking effect in the beginning as well as the rest of the effects, as they went awesomely well with that music you chose. Sick editing Phil!
Thanks mate
@@GregoryShtevensh could you provide the name of the song at 18:36 please? Its a banger but I'm having no luck with shazam and such :(
Mistakes happen... its how you deal with them that makes all the difference..
Also Phil, bangup job on the B roll of the build... liked the tune and just really cool shots and editing!!
Thanks you guys for taking us on this ride
Gorgeous build
It was fun to watch this build take shape and it came out so good! I also like that Jay leaves his mistakes in the videos because that can be more useful for people, they learn what not to do and why you shouldn't do it.
This build looks absolutely sick! And awesome montage by Phil as usual, loved the old video effects!
Great job with the build. I also loved how Jay was just walking casually through the montage xD.
And Jay, you didn't kill the mainboard, you just prepared something to fix for the Northridge Fix collaboration. 👍 well done!
I don't think the mainboard is dead. There's not a lot on the back that can short and kill it at least in that area where the bracket got stuck. So my guess is it detected a short and just protected itself. Otherwise, sure I would like to see a Northridge Fix collaboration.
Killer build, as always! Thanks for adding the montage of the final build. Love the whole thing. Keep up the good work guys!
Wow... this is one of the nicest builds i have ever seen, the outcome is incredible, congrats Jay. 😊
I prefer the live filling versus the b roll I enjoy seeing the science at work!!!!!!!!!!!!!!!!!
This build is GORGEOUS! I'm a Mega Man X fan, and this build gets two thumbs up from me! Excellent work, Jayz!
Zero will always be better than x
@@playboyreaper5966 Ditto
12:43 OMG this look Jay, THIS is the look of someone who was completely taken by surprise at how their friend reacted to you telling them their PC is dead! This is a priceless pause xD
"This is gonna be the most boring montage Phil has done"
Phil: ya think so buddy? 18:27
Phil never disappoints with his montages and today was no exception!!
At 19:04 I loved how Jay realized a B-roll was being shot and quickly moved out of the frame
I am sorry for all you had to go through. And this is not to pour salt into the wound, but knowing you how knowledgeable you are and meticulous (usually), this clearly happened because you built this PC switching/skipping steps. Which in turn, in my honest noob opinion, is one of the greatest lessons we can take away from all of this.
No matter what PC you're building, always go through with all the required steps to avoid these kind of outcomes.
Glad everything turned out ok, your friend is super MEGAMANChill and the build looks insanely good. Also, 2000IQ Move with 2nd reservoir. Like holy shit, it's like magic!
I had to learn the hard way too a couple of years ago. Did a build and never worried about booting it before finishing it. Then there I was standing proud in front on it until... Boom no post...
That PC looks incredible, Jay! Just once in my life I'd like to try building a custom water loop PC like that.
I made some videos how to build one. It has 2 custom loops Its called: T virus resident evil watercooled pc
That little air pressure gauge is SUCH a good idea.
This new version with a hose makes me wish I'd waited until it came out. But I still love the older one that I own. The most important watercooling tool ever. It let me buy used parts with confidence, because I didn't have to wait until I had everything, built it and had it spring a leak onto some paper towel. Imagine messaging a seller after several months...
Plus not having to use paper towels saves the environment :P (and your time, no more 24 hour leak tests, even for my anxious ass 30 minutes was plenty)
👍Sweet build Jay! Really came together in a simple, yet elegant way.
There's something very soothing about watching Jay do a build. It's almost therapeutic
Nice track for B-roll and editing for the digital atchoo bit
It is very important you never ever remove any kind of mistake you might make from your videos, it provides us the ability to learn some very important lessons in future builds. Thank you Jay! 🙂
Jay, I do this all the time when building a PC with a custom loop: Take the tubes off the CPU block, grab your blower vac and blast air through the block while you do your initial boot up test. I've actually got a soft tube and fitting that slips over the end of my little blower so I don't have to awkwardly hold the blower while testing. It keeps it cool enough to even boot windows and do basic tasks as long as the blower keeps chugging.
Thank you Jay for the video, now we know what not to do😊. You’ve always kept it real and showed us that even the best of us make mistakes, love that honesty in your videos. The final build is outstanding and just having Megaman as a solo figure in the case and changing the LEDs to make it appear like a level in the game is an awesome look. Appreciate the content you guys put out and props to Phil the montage god!🤘🏻
the montage at the end was awesome. lol jay comes into screen drinking a water bottle and moves out of the way when he notices hes in the shot. lol good stuff. dope build. love the mega man theme.
Man, everyone needs a friend like Jays.
Hats off Jay, fantastic build! So cohesive and well thought.
and it's broken🤣🤣
I love this build, and I'm not one for white computers. Thank you for sharing your successes and failures; it helps me learn what to do and what to watch out for. This build has made me really want to doing PC builds for fun. Normally I just take a case I already have, with parts I already have, then adapt and upgrade. Thanks for always sharing!
He didn't get mad because it wasn't his $300 for a new motherboard.
I wonder what the Micro Center strategy is behind their rather extensive ad campaigns. Inform every person nation and worldwide about deals they can't get?
Seems relatively simple to offer the same deals online.
@@ferrumregit4252i thought the same, but then I got something from their online store on Amazon in Dec 2024. So maybe that’s changing…and they’re starting to sell more to the rest of us
His friend is not even mad .
And J is honest asf. Damn good friends bond
I am still perplexed that a case in 2023 does not have a motherboard cut out for the rear. When he screwed out the backplate it would just have fallen of and out of the case, not short circuting anything.
9:04 😂😂😂WTF Jay??? 😂😂😂
11:10 those edits were actually really clean
2 Things I have to say. 1st. I am loving the build videos. 2nd. The editing and montage footage was awesome. The production of this series was very entertaining. The end build with the flames was sick.
It’s always good to show the mistakes. That’s the part that actually teaches stuff. I’ve took apart and re-built my PC since I was 8. Broke it countless times until I learned what thing goes where. And even now, after all the learning and practice, mistakes still happen.
Couple months ago, I took apart the PC to change the case with a more airflow optimised one, and apparently I forgot to plug the sata cable to my SSD with all my stuff. Didn’t show up when re-installing the OS, didn’t show up afterwards, and I’m there like “did it really die?!”, then I opened up the PC and saw I only plugged the power to it, but not the actual cable for data.. 😂
Looks like an NZXT Design flaw to me to not have that part cut out. Most cases do.
Great job! I love what you've done with the place! Mega Man
I really think this is a beautiful build, Jay. Your friend is a lucky guy! We all make mistakes, thanks for having the courage to show us you too make mistakes. There is no shame in it and honestly it makes us all feel a little better. Keep up the great work Jayz crew!
Friend took it like a champ. Good job sharing the mistakes, we're all human.
Looks super clean. Love the Build, Jay, keep up the good work.
19:04 lmfaooooo I’m dying 😂😂😂
Jay has inspired me with my 1st build, Now this! can't wait to build my 1st water cooled build. Thanks for the inspiration Jay! More power to the channel!
Well that Phil montage! Chef's kiss! Great mix Phil. Also maybe let all the caps discharge reset the CMOS. And see if the board will boot.
The build looks so nice, I really like the white lighting with the blue effect moving through it.
20:57 This is sick! The hero holding the card is SCK! The b-roll is SCK! The whole build is SiiiiiCK!!!
Jay, your best friend sound like a smile. around the 9 minute mark you can see the MB die. there is an amber light in the top right of the MB that lit on the 2nd attempt to start it.
Thanks for taking us on this journey. I very much enjoyed the ride and to finally see the outcome of this amazing looking PC!
SOOOO BEAUTIFUL!!!!!! - AMAZING WORK!!!!!!
And PHIL TOO!!! - That montage was EXCELLENT!!! (as always) I am REALLY digging that close up scope thing you got... VERY UNIQUE!!!
This was fun. ... Glad to see Mega Man power up! ... (20:00) Preforming a diode test on the power connectors on the motherboard can diagnose a short pretty quick. Also using a multimeter to preform a DC Voltage test on the PSU or board power connectors can rule out any power problems pretty fast and reliable.
I laughed at “I killed your computer” “YAY! I mean, awe, I mean Yay!!” 🤣
In my newest build, I accidentally knocked a cap off the motherboard with the radiator as I put it in. Didn't figure it out until everything was in and it just wouldn't turn on. Really comforting to know professionals like Jay make human mistakes, too.
That was an AWESOME video. I've always been afraid of custom liquid cooling, but watching your videos is starting to change my mind. Thank you
love the old retro 80,s theme and the new video montage theme Phil nice one good one. And even the how that PCIE cable run's to the GPU in that direction amazing but so simple. 😀😉😏
This Mega Man Series of Build Videos has been so cool to watch. Thanks Jay and what an awesome result.
That one shot with the RAM LEDs synced to the song!🔥🔥🔥👌 18:50
Just wanted to stop by and say that after all these years, you still put out great content. THANK YOU !!!!
My advice remove the mystic fog it is a problem it will separate and clough if not on all the time with high flow, I replaced it with sold white and it is very very close (this is was directly adviced by EK to stop using the mystic fog coolant).
i loved this series. fascinating project, i always love watching custom loops be built
Love the look of this build, gives me lots of ideas for my own re-build! Thanks guys!
Amazing , definitely would like more water cooled builds from you. Looks absolutely amazing
hey jay, being an electrical engineer i can tell you the pins themselves have way more than sufficient specs to carry the power that is required of them and with a large extra buffer. the contact ressistance is the issue of the connectors and not the pins themselves as they have a exceedingly low ressistance by themselves
I'm not usually into slot machine style lighting in computers, but that white/blue lighting theme with the white enclosure and black components looks sharp and timelessly futuristic. First over the top enclosure build I've seen that I would consider replicating.
WOW! Did Jay just admit to being a noob at this? What is the world coming to! 😉😆🤣
Seriously, though. Fantastic looking build! Glad the fix turned out to be easy!!
Thats a gorgeous build! I've been waiting for it to be done. One of the slickest i've seen. Makes me wanna do a custom loop really bad.
11:15 I feel you Jay. Been here more times than i would like to admit.
Very inspiring, I’m debating doing a custom water coolant loop for my first PC build. It will only be cooling the CPU, as I havnt found any water block for my GPU, but your videos are the best on UA-cam. So thanks man
19:05 Exactly my reaction when I knew someone was filming and I just walk through it. 😂
I LIKE THE CABLES!!!!! 😮
How lucky would someone be to have a friend like Jay!!!??? This PC is one of my favorite ones you've done!! 15/10 SIX stars, three thumbs up!!! 😂😂😂 Both my vehicles are white with black accents so you can tell how much builds like this clean speak to me!!!
Probably my favorite build to date, and I’m not even a mega man fan. The fire scene with the ram lighting was just *chefs kiss* ahh
Absalutly amazing build. You are killing it Jay two thumbs up.
Ohhh boy... This build just looks so awesome... Great work...
That was some sexy B-roll, Phil! Great music selection too, and I loved the comedic bit of Jay walking into the shot 😂
It's so nice to see that everyone makes mistakes while building. I have built several for friends and family, but this is my worst fear. Two options, cover the cost and lose money when you weren't charging in the first place, or they lose money. It's a lose lose situation.
It came out sooo goood! Props for u Jay! and Phill, that montage came out goood aswell :D Need to try someday to build some more of figure theme build
Jay walking in the background taking a sip of his water bottle killed me during the showcase, I was taking a sip of my soda at the same time thank you for that loll 🤣🤣🤣
Wow what an amazing build.
That said, based on only what i already know, i could sell your friend crap in a shitstorm.
Love the vids thanks for your time. I'm building my first pc rn so I genuinely appreciate the content and have subbed.
Turned out awesome! Very much looking forward to my next build with hard tubing! Cheers!
That is a sweet build. It's always good to see you finish one of these, warts difficulties and all! I'm in a Fractal North, which I really like, although it isn't the best choice for a water cooled build. It's going to become a water cooled build.
This build is awesome! As well JayZ and editing of the video.
bravo Jay...looks great...killer lighting....
I wish I could build something like this for myself and for my kids ...themed pc builds. Great work Jay, lovin' it. 💪👍
Great build! Maybe the Ram could be the live/energy bars?
If you had used a normal tube res it could have been a dr light capsule with X dashing to it for the powerup.
A hard CMOS reset could fix that motherboard.
> Installs RGB
> makes them "white" for a white build
I love what you did at 19 mins in. That was just hilarious. You have a great sense of humor. I've killed a couple of parts myself. That computer is beautiful. I'm sure he'll love it. I challenge you to do stuff like that in every video and see who catches it. I think it would be a fun experiment. Just don't make it too easy to spot.
Great build Jay. Thank you for taking us on the journey. I hope your buddy likes it. I know I do :)
I remember building my first PC back in 2000 and I made a big mistake to put all the case screw mounts in and it was shorting the motherboard, luckily it didn't fry it. It was a good Intel Pentium 4 motherboard and it lived for over a decade!