This is from loot studios. I recognized it.. I own the files. But so far, I’ve not attempted to make this yet because I was put off by the extra hit.. can anyone please tell me that piece he’s using that if he wanted to get rid of the extra head is that standard or is that something he made? And is that the standard size for the miniature? God, I hope so.. please please can somebody help me? Please anyone can instruct me. I have a 3-D printer, but it doesn’t know where is near big enough to print this piece.. I can pay somebody to do it for me, but I need to know if this is the standard size the miniature comes in? And if that piece, the covers up the neck hole for the extra head is also standard. I don’t remember seeing that when I looked at the files.. I hope to hear from somebody soon thank you all for listening
I got the files as well and I can´t wait to find some way to print it and paint it because... I don´t own an printer myself... it´s gonna be really expensive.
Depending on where you live, you can find a local hobby shop and see if anyone there prints. Sometimes folks will print if you buy the resin. Maybe a small fee depends on the person though. I think I’ve been printing for two weeks steady now and still have 4 more batches to go. 15 hours ish per batch so several more days to go.
Please, sir, I just subscribe to you. I would’ve done it sooner if I had found you, sooner. Did you upscale this miniature or is that the standard size? And that piece that you showed us to cover up the extra hit is that also standard or something you made or handmade? I have a sub subscription to loot Studios and I have this miniature files.. but I’m kind of new to printing in a little bit out of my depth. I could use some advice and help.. I look forward to your next video. Thank you.
@@timsoyer3840 there are 2 versions that you get from loot, 32mm and 75mm. I printed the 75mm. The little piece comes in the files and just gives you the option of making it with 5 heads or 6. What kind of printer are you printing on and I’ll see if I can give you some tips. The more you print the easier it will get. If a moron like myself can figure it out, anyone can. So I have faith you will do just fine!
@ I have been trying to get my hands on a really good Teamat miniature. WizKid makes a really good one, but I got admit it’s close to $500 and I can’t afford it.. I got a really good one from Etsy, but I’m not 100% satisfied with it. It’s big enough and looks close to right.. but a couple of heads just a little too different. I saw another one on Etsy that looks really great, but I can’t get it anywhere anywhere near or big enough.. when I saw this in my files from loot. I will look at it for a moment. Thought it looked great, but was frustrated when I saw the extra head. Shrugged my shoulders and looked at the rest of the bundle.. every once in a while, I look around on UA-cam for new miniatures coming out. I often watch the Gallant goblin for that.. and I look for what’s new on the 3-D printing front. Somewhere in between I stumbled across your video and decided to watch the CEO. Well let’s take a look at how that miniature looks in my mouth almost hit the floor when I saw you able to take that extra head off and put a patch on the back.. I then started looking up your other videos and subscribed. I’m very excited at the prospect of being able to have this manager in my collection. I think I already own the files.. my library will print them for me if I send them the files. I’ve been meaning to try this service and I think this will be the time to do it.. I’ll have to pay for it but it’ll be a lot cheaper than $500. That’s for sure.. I paint most of my own miniatures. But I’ll tell you what if the price is right on the printing of this miniature I might just pop for a professional job on this one.. I have been collecting the WizKid’s adult dragons. I have about five of them so far.. and I’ve been getting ready to pull the trigger on one of the ancient ones. It’s almost Christmas. If I’m really lucky one of my family might’ve even got me one.. I have a few dragons also from reaper. I just received recently, my kicks daughter six from reaper, which had a couple really good dragons in it.. I don’t really know how to send any pictures on this. But if you drop me a hello or my email, I’ll happily send some pictures of my collection.. if you’re at all interested. Either way, thanks for getting back to me.. and I eagerly look forward to hearing your next video. Have a great day, man.
This is from loot studios. I recognized it.. I own the files. But so far, I’ve not attempted to make this yet because I was put off by the extra hit.. can anyone please tell me that piece he’s using that if he wanted to get rid of the extra head is that standard or is that something he made? And is that the standard size for the miniature? God, I hope so.. please please can somebody help me? Please anyone can instruct me. I have a 3-D printer, but it doesn’t know where is near big enough to print this piece.. I can pay somebody to do it for me, but I need to know if this is the standard size the miniature comes in? And if that piece, the covers up the neck hole for the extra head is also standard. I don’t remember seeing that when I looked at the files.. I hope to hear from somebody soon thank you all for listening did he enlarge that from the standard file?
@@timsoyer3840 this is the 75mm version. You can do the 32 mm version as well which comes with the files. That extra piece is in the files as well. I didn’t realize what it was until after printing it. I would think the 32 mm would be printable on any printer. The 75 mm would have issues on any printer with less than a 10 inch build plate and a short z axis but that’s a guess on my part. I have a Jupiter and a Saturn 2 and printed all the 75 mm parts on both.
👍❤️🤘🔥
Awesome! I was waiting this video! What a scale!!! love it. Cant wait to see it painted. Thanks!!
@@zeroa6 you and me both!! I hope I do it justice!
@@NosterRex Lol! I know you will!! Cheers
Looking good, always the chance of a mishap. I use the bad parts for paint testing/ color schemes.
Got to ask where is the model from?
I do the same. Got a box full of misprints lol. This is from LOOT STUDIOS, dec 24 release.
This is from loot studios. I recognized it.. I own the files. But so far, I’ve not attempted to make this yet because I was put off by the extra hit.. can anyone please tell me that piece he’s using that if he wanted to get rid of the extra head is that standard or is that something he made? And is that the standard size for the miniature? God, I hope so.. please please can somebody help me? Please anyone can instruct me. I have a 3-D printer, but it doesn’t know where is near big enough to print this piece.. I can pay somebody to do it for me, but I need to know if this is the standard size the miniature comes in? And if that piece, the covers up the neck hole for the extra head is also standard. I don’t remember seeing that when I looked at the files.. I hope to hear from somebody soon thank you all for listening
I got the files as well and I can´t wait to find some way to print it and paint it because... I don´t own an printer myself... it´s gonna be really expensive.
Depending on where you live, you can find a local hobby shop and see if anyone there prints. Sometimes folks will print if you buy the resin. Maybe a small fee depends on the person though. I think I’ve been printing for two weeks steady now and still have 4 more batches to go. 15 hours ish per batch so several more days to go.
What type of 3d printer do you use? It looks too detailed to be fdm, but I could be wrong of course.
@@Nurg1982 I have an elegoo Jupiter, and a Saturn 2 8k. But I am about to switch out my Saturn 2 for a Saturn 4 Ultra. I don’t own any fdm printers.
Please, sir, I just subscribe to you. I would’ve done it sooner if I had found you, sooner. Did you upscale this miniature or is that the standard size? And that piece that you showed us to cover up the extra hit is that also standard or something you made or handmade? I have a sub subscription to loot Studios and I have this miniature files.. but I’m kind of new to printing in a little bit out of my depth. I could use some advice and help.. I look forward to your next video. Thank you.
@@timsoyer3840 there are 2 versions that you get from loot, 32mm and 75mm. I printed the 75mm. The little piece comes in the files and just gives you the option of making it with 5 heads or 6. What kind of printer are you printing on and I’ll see if I can give you some tips. The more you print the easier it will get. If a moron like myself can figure it out, anyone can. So I have faith you will do just fine!
@ I have been trying to get my hands on a really good Teamat miniature. WizKid makes a really good one, but I got admit it’s close to $500 and I can’t afford it.. I got a really good one from Etsy, but I’m not 100% satisfied with it. It’s big enough and looks close to right.. but a couple of heads just a little too different. I saw another one on Etsy that looks really great, but I can’t get it anywhere anywhere near or big enough.. when I saw this in my files from loot. I will look at it for a moment. Thought it looked great, but was frustrated when I saw the extra head. Shrugged my shoulders and looked at the rest of the bundle.. every once in a while, I look around on UA-cam for new miniatures coming out. I often watch the Gallant goblin for that.. and I look for what’s new on the 3-D printing front. Somewhere in between I stumbled across your video and decided to watch the CEO. Well let’s take a look at how that miniature looks in my mouth almost hit the floor when I saw you able to take that extra head off and put a patch on the back.. I then started looking up your other videos and subscribed. I’m very excited at the prospect of being able to have this manager in my collection. I think I already own the files.. my library will print them for me if I send them the files. I’ve been meaning to try this service and I think this will be the time to do it.. I’ll have to pay for it but it’ll be a lot cheaper than $500. That’s for sure.. I paint most of my own miniatures. But I’ll tell you what if the price is right on the printing of this miniature I might just pop for a professional job on this one.. I have been collecting the WizKid’s adult dragons. I have about five of them so far.. and I’ve been getting ready to pull the trigger on one of the ancient ones. It’s almost Christmas. If I’m really lucky one of my family might’ve even got me one.. I have a few dragons also from reaper. I just received recently, my kicks daughter six from reaper, which had a couple really good dragons in it.. I don’t really know how to send any pictures on this. But if you drop me a hello or my email, I’ll happily send some pictures of my collection.. if you’re at all interested. Either way, thanks for getting back to me.. and I eagerly look forward to hearing your next video. Have a great day, man.
This is from loot studios. I recognized it.. I own the files. But so far, I’ve not attempted to make this yet because I was put off by the extra hit.. can anyone please tell me that piece he’s using that if he wanted to get rid of the extra head is that standard or is that something he made? And is that the standard size for the miniature? God, I hope so.. please please can somebody help me? Please anyone can instruct me. I have a 3-D printer, but it doesn’t know where is near big enough to print this piece.. I can pay somebody to do it for me, but I need to know if this is the standard size the miniature comes in? And if that piece, the covers up the neck hole for the extra head is also standard. I don’t remember seeing that when I looked at the files.. I hope to hear from somebody soon thank you all for listening did he enlarge that from the standard file?
@@timsoyer3840 this is the 75mm version. You can do the 32 mm version as well which comes with the files. That extra piece is in the files as well. I didn’t realize what it was until after printing it. I would think the 32 mm would be printable on any printer. The 75 mm would have issues on any printer with less than a 10 inch build plate and a short z axis but that’s a guess on my part. I have a Jupiter and a Saturn 2 and printed all the 75 mm parts on both.