Cheers for that... Your trick fitting the kick start spring worked a charm on my Gilera runner 70cc. I didnt have any wood so just did it in my lap, but the spring is installed, my kick start is working sweet and all fingers are intact. Love the channel im watching from the U.K 😎👍
Thanks for the vid! I just bought the Stage6 MKII clutch from you guys. It worked great on my other bike. On the nx50, it will rev up to about 4500 rpms and then engage and then the engine struggles to move the bike much at all. Do I need to back off the tension on the clutch springs?
@@Scooterswapshop it's a new to me bike and despite running fine with the new carburetor and main jet I put in - it decided it was going to run rich today. After I messed with the clutch 18 times, I decided to put in a smaller main jet. Now it runs great again. But I swapped back on the original clutch so I got to put the Stage6 back. Dang thing!
I’ve rebuilt my Kickstarter three times like by replacing the gear and spraying and it won’t never spring back and now it doesn’t Engage until like the kickers halfway down any idea what’s going on I’m so sick of replacing the kicker gear and spring for nothing
Nice vids guys. Did u ever get ur hands on a knock off malossi mulitavar variator?? I have seen one but its not beying sold in.y country. Parts are super expensive so i thibk of buying on if incan find it. Many thanx.
What’s a good carb ? for a sym dd50 build with 72 corsa,arrow exhaust Keli clutch, Keli variator with 5.5/6g weights. Got 1500 contra and yellow polini clutch springs?. It runs good hit 62 top speed. But it runs a little high on the temp around 350. What carb would you recommend? I have a obo carb with 50 pilot and 142 main.
Struggled with mine for two days until I watched your video. Ten minutes and I was done. Great idea and perfectly presented. Thank you so much!
Thanks! They’re a pain!
Very good my man.
Simple and to the point
Thank you much
Cheers for that... Your trick fitting the kick start spring worked a charm on my Gilera runner 70cc. I didnt have any wood so just did it in my lap, but the spring is installed, my kick start is working sweet and all fingers are intact. Love the channel im watching from the U.K 😎👍
Glad it helped
Hurry up we can't wait!
thanks!
Very helpful thank you
Thank you
where can i buy the thing next to the half sprocket? drive face or simething mine doenst have that 0_0
Fantastic , thanks guys !
Thanks for the vid! I just bought the Stage6 MKII clutch from you guys. It worked great on my other bike. On the nx50, it will rev up to about 4500 rpms and then engage and then the engine struggles to move the bike much at all. Do I need to back off the tension on the clutch springs?
Yea it may be engaging too high but it’s going to depend on each and every engine setup
@@Scooterswapshop it's a new to me bike and despite running fine with the new carburetor and main jet I put in - it decided it was going to run rich today. After I messed with the clutch 18 times, I decided to put in a smaller main jet. Now it runs great again. But I swapped back on the original clutch so I got to put the Stage6 back. Dang thing!
Could i install a kickstart on a 4t piaggio zip?
I’ve rebuilt my Kickstarter three times like by replacing the gear and spraying and it won’t never spring back and now it doesn’t Engage until like the kickers halfway down any idea what’s going on I’m so sick of replacing the kicker gear and spring for nothing
My clip keeps coming off when I go to hook the spring up it almost acts like there is too much tension or am I doing something wrong
Nice vids guys. Did u ever get ur hands on a knock off malossi mulitavar variator?? I have seen one but its not beying sold in.y country. Parts are super expensive so i thibk of buying on if incan find it. Many thanx.
don't mess with knock off parts. buy real or not at all
@@Scooterswapshop i have real mhr polini and hebo. I just want to test it
thx man
Thanks
No bearing in kick cover?
Kicker covers stock do not have bearings
What’s a good carb ? for a sym dd50 build with 72 corsa,arrow exhaust Keli clutch, Keli variator with 5.5/6g weights. Got 1500 contra and yellow polini clutch springs?. It runs good hit 62 top speed. But it runs a little high on the temp around 350.
What carb would you recommend?
I have a obo carb with 50 pilot and 142 main.
Give the shop an email or call we can help!
I need help with my mini super pocket bike 107cc
nothing we can do for that
Ok now make a video on how to install it
That’s literally what this video is
Been here 3 hours trying now I give up I’ll run without one
LMAO!
Pauulllllll
haha
🤪
thanks
Lube everything? Really? 🤣🤣
100%