nice tutorial. in case we want straight extrusions to maintain typography/letter geometry, we can also use Apply UV and then extrude each letter separately, selecting the extrusion direction from a construction line that is perpendicular to each letter's center. we can either draw a line from start to end of letter on top view and then the perpendicular, or if we have letter surfaces, directly with the Surface Normal command and clicking approximately to the horizontal center of each letter.
Thank you very much, very well explained. Is it possible to do the same thing using Uv curve, with a non rectangular base surface? For example with a cone. I didn't succeed to do the same thing properly using a target surface which is not rectangular when unrolled. Could you explain us how to do so?
HI Max, Yes, you can apply to any "single" surface with UV curve. However, when you flow back to the tight area, like the tip of cone, it will distort the form/object a lot.
Hi and thanks for posting your videos; they really help! I'm trying to create a pine-cone. Do you think you can post a video for that?! Thank you so much!
Hi Kathyann, you are welcome. I am glad you find my video useful. I am sure can make a pin-cone video by using Rhino 3D. I will put it on my video creating list. You should see it in few weeks or sooner. If you like texturing, you may want to check out my other video ua-cam.com/video/snRz9SdQwos/v-deo.html for men's ring texture. Thank you
if they are black and white clip art. you can have it trace. If it is photograph in super high resolution. you may use highfield but it will never get in much detail like photographs
I still don’t understand when it is best to use UV curve. When is it more beneficial to use UV curve? What is a UV curve? Thanks. I am now a private member to your UA-cam channel
Hi Zukii, to create UV curve is to flatten a surface on construction plane. so you and design your pattern flat. sometimes it is hard to design in 3D. once you have your design done. you can flow the design (curve or solid) back the the original surface. and welcome to the club!
Zia, I offer online one-on-one training for both introduction and advance Rhino for jewelry choruses and also have the plan to record on demand course for the jewelry designer who is new to Rhino. It is in the progress. Once it is available, I will post on my UA-cam Channel. Stay Tuned!!
Well, whenever I create a box, and then try to add a text to it, text ends up at the bottom of the box - I try to create a surface etc etc. And that SIMPLE thing............I have found no tutorial on it. Rhino seems like a very bloated program. When a really simple thing becomes such an issue... Flat surface, which I assume is not a surface, otherwise It would have worked, and then trying to add simple text to it.... (to the extrude the text and make the text a negative). But no, not with Rhino. I think it is a failure when a simple thing like that becomes a problem.
5:42 you diselect the top and the bottom, and you don't say it, and the shot just goes straight to the next frame... bumped my head a while till i figured that out, but excellent tutorial tho
seriously????))))))))))) this video - empty nothing/ attentioin - for this no nees use uv curves, - need use smash for sirfave, put there letters - or gems or anything you want - and then flow along surface/
Thank you I find your instructions always so complete !
You are so welcome!
nice tutorial. in case we want straight extrusions to maintain typography/letter geometry, we can also use Apply UV and then extrude each letter separately, selecting the extrusion direction from a construction line that is perpendicular to each letter's center. we can either draw a line from start to end of letter on top view and then the perpendicular, or if we have letter surfaces, directly with the Surface Normal command and clicking approximately to the horizontal center of each letter.
TANK YOU SO MUCH
you explain that very very good.
better, much better than my teacher!
Happy to help!
Simple et efficace comme d'habitude.
Merci beaucoup
vous êtes les bienvenus. Je suis content que tu aimes ma vidéo
Thank you,
i am watching each of your videos.
There are amazing.
Glad you like them!
THANK YOU SAR
you are welcome
Thank
You are welcome
Nice , ty
You are welcome!
Very useful and straight to the point ! Really good tutorial !
glad you like it!
This has been a huge help thank you so much PJ! Subscribed to your channel :)
Thanks for the sub!
Teşekkürler👍👌🖐
You are welcome!
Fabulous
Thank you!
Thanks so much for the videos - You are the best
Glad you like them!
Super
Super
Thank you for your teaching
You are welcome!
Good
Thanks
Thank you.
Thank you for this Great information!!
thnanx for video..keep it
You are welcome!
Thank you for your videos! Very helpful and nicely done!!
You are welcome! Feel free to let me know if you have questions.
Your videos are great! Thanks!
Thank you Catherine!
Very good and clear, thank you.
You are welcome!
awesome, thanks
You're welcome!
Thank you so much for the video! Was really helpul!
happy to help!
Very clearly explained!
sirnewhill Thank you. stay tuned for Every Monday new tutorial!
I really enjoy the video, Thank you,
Glad you enjoyed it
Hello . I need a Video how to modeling 3d trophy cup luxury one in rhino
Excellent!
Glad you liked it!
Thank you very much, very well explained. Is it possible to do the same thing using Uv curve, with a non rectangular base surface? For example with a cone. I didn't succeed to do the same thing properly using a target surface which is not rectangular when unrolled. Could you explain us how to do so?
HI Max, Yes, you can apply to any "single" surface with UV curve. However, when you flow back to the tight area, like the tip of cone, it will distort the form/object a lot.
Hi and thanks for posting your videos; they really help! I'm trying to create a pine-cone. Do you think you can post a video for that?! Thank you so much!
Hi Kathyann, you are welcome. I am glad you find my video useful. I am sure can make a pin-cone video by using Rhino 3D. I will put it on my video creating list. You should see it in few weeks or sooner. If you like texturing, you may want to check out my other video ua-cam.com/video/snRz9SdQwos/v-deo.html for men's ring texture. Thank you
Thank you thank you! Yes, I've already watch the men's ring texture a few times and will watch it again. :)
Is it possible to use photographs instead of three-dimensional text?
if they are black and white clip art. you can have it trace. If it is photograph in super high resolution. you may use highfield but it will never get in much detail like photographs
maybe I ask if rhinoceros 4.0 has the red green blue coordinate. how turn on? my rhinoceros shows only a cross.
I believe Gumball start with Rhino 5, If I don't remember wrong.
I still don’t understand when it is best to use UV curve. When is it more beneficial to use UV curve? What is a UV curve? Thanks. I am now a private member to your UA-cam channel
Hi Zukii, to create UV curve is to flatten a surface on construction plane. so you and design your pattern flat. sometimes it is hard to design in 3D. once you have your design done. you can flow the design (curve or solid) back the the original surface. and welcome to the club!
Hello, how are you? Congratulations and thank you for this video, this was just what I needed to learn and apply in a drawing I'm doing ...
Great!
mouse move, only a small cross move,
Very nice.
Why you not make video for newcomers like one by one lessons
Zia, I offer online one-on-one training for both introduction and advance Rhino for jewelry choruses and also have the plan to record on demand course for the jewelry designer who is new to Rhino. It is in the progress. Once it is available, I will post on my UA-cam Channel. Stay Tuned!!
Great!!!
Thanks!
Good! But, I russian, because picture only...still like!
Welcome to my channel. Hello from USA!
hi Pj please do a video on non manifold edges what they are and how to repair ? thank you
ok. I will put it on my creating list.
+PJ Chen Design sir please show some of ripen piece
Hi, what is the different between UV curve and Smesh? When do you recommend to use this command or UV curve? Thank you. Hadar
that is a very good question, Hadar. I will make a short video to show you the difference and their application. Stay tuned.
Thank you very much :)
Hi
Great video.
How do you write an arc text in Rihno
you can create curve first then use flow along curve to flow it back. I have videos show you this on my channel
Hi Pj love your tutorial !
Do you use any add ons with rhino or just the basic version to create your models ?
Thanks
Thank you. I do have Rhinogold, but all my tutorials on UA-cam only use Rhino.
Just spent two days going over and over your instructions,i have Rhino7,no luck so far?????
I GIVE UP,NO GO!
Well, whenever I create a box, and then try to add a text to it, text ends up at the bottom of the box - I try to create a surface etc etc. And that SIMPLE thing............I have found no tutorial on it. Rhino seems like a very bloated program. When a really simple thing becomes such an issue... Flat surface, which I assume is not a surface, otherwise It would have worked, and then trying to add simple text to it.... (to the extrude the text and make the text a negative). But no, not with Rhino. I think it is a failure when a simple thing like that becomes a problem.
Im doing everything and its not working extremely stressfull
Which part is not working?
and you are welcome to send me your 3dm file at pj@pjchendesign.com , I can take a look for you.
PICTUR CLAEN NO SAR
5:42 you diselect the top and the bottom, and you don't say it, and the shot just goes straight to the next frame... bumped my head a while till i figured that out, but excellent tutorial tho
🙂 Thank you
Can you make my name like a pendent with diamonds Argary
BB
Argary BB Hi Argary. If you are interested in custom made jewelry, you can contact me at email pj@pjchendesign.com. Thank you.
seriously????))))))))))) this video - empty nothing/ attentioin - for this no nees use uv curves, - need use smash for sirfave, put there letters - or gems or anything you want - and then flow along surface/