Those are some great shortcuts. Thanks for the video. Another way to to use the mid point between two points is using the Smart track. Hold the mouse on a first point. then on the second point, when you see the two white temporary points, move the mouse near the mid point and it will snap so you can click on it. Also works if you dont have a second point to hold the mouse, is this case, Hold the mouse on the first point, then choose your second point anywhere and click control to create a temporary second point and then move the mouse near the mid point, it will also snap. Cheers
ZS is my magic command. I tried to find something similar in other softwares that I need to use at university and I only found it in Revit by selecting the object I want to make axis of rotation
One trick that saves me a lot of time is for manipulating an object, say a cube, if you want to manipulate only one face on it, just control shift click on the face and you’re able to edit the single face of an object
You saved me from constantly trying to see if there is an "m2p" command from AutoCad in Rhino by showing the "between" command. Also, I guess it wasn't available in Rhino when you made this video, but now you can also maximize viewports with ctrl+f1/f2/f3/f4. Each one of them is for different viewports.
Thanks for the tips they were great. The between command is genius! I can't even count the amount of time I've done exactly what you did with the multiple guide lines only to then create the line I actually wanted. Gonna save me sooo much time!
yo Archi Hacks! this is gold. question: is it posible to make the F keys toggle the Osnap's outside of a comand? when i do the steps you show, it will only turn off or on the near feature IF the near is unsellected before starting a "picking points"-comand. Thanks
It's not about the speed of production. It's about the quality of translation between the hand drawn idea and the vectorial representation of such drawing using Rhino 7 and Grasshopper. The way we translate from hand drawn to 3D is the key success. Speed will come later for better accuracy. imo...
Those are some great shortcuts. Thanks for the video. Another way to to use the mid point between two points is using the Smart track. Hold the mouse on a first point. then on the second point, when you see the two white temporary points, move the mouse near the mid point and it will snap so you can click on it. Also works if you dont have a second point to hold the mouse, is this case, Hold the mouse on the first point, then choose your second point anywhere and click control to create a temporary second point and then move the mouse near the mid point, it will also snap. Cheers
ZS is my magic command. I tried to find something similar in other softwares that I need to use at university and I only found it in Revit by selecting the object I want to make axis of rotation
Great tutorial, will be using these shortcuts!
One trick that saves me a lot of time is for manipulating an object, say a cube, if you want to manipulate only one face on it, just control shift click on the face and you’re able to edit the single face of an object
Oh man, that's a great tip!!
It also works with edges. Great tip
🤯🤯Blew my mind, ive been wishing for this all along and it existed
"ay-lee-us-sus"
thank you for you great video! the Between comand is nuts!
What is the difference between using osnap with project on and off?
Project will send your clicks to the bottom of your CPlane!
and then theres me using german keyboard basically using ctrl-y as undo all my life hahaha
You saved me from constantly trying to see if there is an "m2p" command from AutoCad in Rhino by showing the "between" command.
Also, I guess it wasn't available in Rhino when you made this video, but now you can also maximize viewports with ctrl+f1/f2/f3/f4. Each one of them is for different viewports.
For me. Select object - invert. Best command when just editing something specific in a bigger project
You are the best. Greetings to you from Morocco
That between command is top tier
okay when I typed CV, it do not work immediately but shows on the command bar first, which I have to click enter. Is that because of new version?
Possibly! Did you create the alias exactly as shown? You might have to add the "enter" as a part of the alias
Between command works by holding Shift key while in command to get temp snap options.
Although manual mentions Ctrl key instead.
Thanks for the tips they were great. The between command is genius! I can't even count the amount of time I've done exactly what you did with the multiple guide lines only to then create the line I actually wanted. Gonna save me sooo much time!
awesome... thanks
Thanks for Between. Shame it doesn't work on the line currently being drawn..
i used Ctrl+w very often, now will try near and between with F3 and F4, also use F5 and F6 for points on and off
Awesome need similar vid!!
I had no idea you could chain commands and I've been using rhino for so long. 😂
I have been waiting for this video, thank you and if you have anything similar why not make a video about it
This is quite helpful and clear. Thank you.
yo Archi Hacks! this is gold. question: is it posible to make the F keys toggle the Osnap's outside of a comand? when i do the steps you show, it will only turn off or on the near feature IF the near is unsellected before starting a "picking points"-comand. Thanks
ctrl+M is already set to MaxViewport
This video is becoming outdated :')
how to do under the shortcut or hotkey in the rhino project to plane
y como puedo exportar estos comandos a otro ordenador?
Awesome Tutorial!
Thanks!!
Welcome!
try to decipher these aliases:
mf
zs
sl
bu
bd
pon
con
2d
move face (but olso ctrl+shift+click)
zoom selected
scale?
booleanunion
booleandifference
pointson?
???
scale2d
now i also have
s1= _scale1d
s2= _scale2d
sw1= _sweep1
sw2= _sweep2
c= _changelayer
s= _setpt
o= _offset
p= _planarsrf
m= _mirror
u= ! _booleanunion _PAUSE _mergeallfaces
a= _align
e= _extrudecrv
d= _DupFaceBorder
de= _DupEdge
al= _ArrayLinear
ap= _ArrayPolar
os= _OffsetSrf
es= _ExtrudeSrf
ex= _Extend
m3= _mirror _3point
b= _print
x= _explode
mh= _makehole
dh= _deletehole
ob= _-offset b
wz= _distribute z
wx= _distribute x
wy= _distribute y
ss= _sellast
sss= _selprev
rr= -_matchproperties _pause _pause _enter
gg= ! _AddToGroup
ggg= ! _RemoveFromGroup
w= ! -Properties Pause Object Color Object 255,255,255 EnterEnd
ww= ! -Properties Pause Object Color Object 0,0,0 EnterEnd
www= ! -Properties Pause Object Color Object 170,170,170 EnterEnd
cc= !-_viewcapturetoclipboard enter
ccc= _viewcapturetofile
sw1= _sweep1
sw2= _sweep2
sh= ! _HideSwap
sd= _setobjectdisplaymode m
br= _bringtofront
v+ '_CPlane _World _Top
vv= '_CPlane _World _front
vvv= '_CPlane _World _right
Hope any of you finds this usefull !
Question: does rhino really doesn’t have education license?
You can get a big discount if you are a student or a faculty!
its 195 euro for life if you are a student instead of 1000
It's not about the speed of production. It's about the quality of translation between the hand drawn idea and the vectorial representation of such drawing using Rhino 7 and Grasshopper. The way we translate from hand drawn to 3D is the key success. Speed will come later for better accuracy.
imo...