I’m in the industry as wellin Az, thank you guys for not being stingy with your knowledge and sharing your ways. I’ve learned so much in such a short time because of others willing to share their the knowledge . #WrapLife
This is a good idea for chips but doesn’t stop two non compatible metals from corroding. Only fix I see is steel hinges or striping paint with hinge off then a repaint and sealing both door and back side of hinge like I did. Just my opinion and 23 years at Jeep.
WHAAAAAAT is the pen thing with the blue tip you use at 15:33?? I want one !idk how to find one! lol can you post a picture of the logoing on it or pm me? I want one!
I believe it is this with the brush end removed, they sell them in orange or blue. Amazon, Bed Bath & Beyond, Ect.. www.oxo.com/deep-clean-brush-set-orange.html
smartcocker I found a similar tool at Dick Blick called colour shaper. I actually bought the kids set. It was cheaper and came with 5 different tips. Can't wait to try them out.
Thank you! I sent you guys a DM in IG (newclearskies) with a wrap project I'm working out, thanks for all your videos, they have helped me so much. Looking forward to more.
Great vid!! I had a question I bought some eBay 5d carbon fiber. It’s very thick and hard to Install. How is sott elemento 6 carbon fiber ? Is fairly easy to install?
Vasquez_david normally it's from Ebay it's a non comfortable, non air-release material. Sott Elemento 6 is my number one choice for printed carbon, which has both of those aspects. However, it has been on backorder for over 1.5 months. I have been using Weprintwraps.com printed carbon, comes in avery or 3m, gloss/matte lam. No minimum order, shipped straight to you. Try that!
I appreciate that you explain everything you do. It shows how fool proof your methods are.
Thank you for the support! Stick around as we're going to continue to put out videos like this for everyone!
I’m in the industry as wellin Az, thank you guys for not being stingy with your knowledge and sharing your ways. I’ve learned so much in such a short time because of others willing to share their the knowledge . #WrapLife
You're very welcome! We want to help other installers as much as possible so we are excited these videos are a help to you!
One word ...."Amazing "
Great video more wrapping videos on jeep wrangler would be great aren't too many wrapping videos on them out there
Did you end up putting a cap on the star head screws or leave it? If so what did you use? Great vid
love the video and the playfulness between u guys.. thanks 4 the video..
Awesome do a tutorial on some interior piece wraps like air vents or dash pieces
We're glad you loved the video! We plan to do more videos showcasing our techniques so stick around!
Where can I find one of those gel pen tools you used on the hinges?
If you ever get a chance to film an FR-S being wrapped that would be sweet. Going to be wrapping mine in the next few months!
GamePlayer4000 I remember the front bumpers beimg kind of tough on those, ill keep that in mind for future episodes if we have one pop up
Nice work dude!
Thanks for rockin' with Wrapsesh, we are excited to have you here with us!
Best shop in Az
Great videos, great technique
what was the blue and white tool you used Please
Great video! What wrap material did you use?
Cool that he uses a torch
This is a good idea for chips but doesn’t stop two non compatible metals from corroding. Only fix I see is steel hinges or striping paint with hinge off then a repaint and sealing both door and back side of hinge like I did. Just my opinion and 23 years at Jeep.
Nice tutotial. However, I am more concerned with why TK421 is not in full uniform...
Thanks so much for the video. Would you typically wrap the hinges before or after the actual door? Thanks in advance for any response!
Mad skills.
Where can I get my self the same wrap?
Do you sell these kits and tools?
Whats the name of the gold edge tool that you are using?
It’s like she started talking louder when you asked her to stop 😂😂
WHAAAAAAT is the pen thing with the blue tip you use at 15:33?? I want one !idk how to find one! lol can you post a picture of the logoing on it or pm me? I want one!
Austin Ray I believe its a cleaning product from OXO, you can get it at Target!
I believe it is this with the brush end removed, they sell them in orange or blue. Amazon, Bed Bath & Beyond, Ect..
www.oxo.com/deep-clean-brush-set-orange.html
@@Clemenceone Thanks a million for the link. Cheers.
What wrap color is this? I been racking my brain trying to find it
White?
Super helpful! Must find a gel finger :)
Great tool and it has quite a few uses as you can see!
Is that what its called? How can i find one. Great video.
smartcocker the label on it is oxo and I believe you can find them at Target.
smartcocker I found a similar tool at Dick Blick called colour shaper. I actually bought the kids set. It was cheaper and came with 5 different tips. Can't wait to try them out.
Thank you! I sent you guys a DM in IG (newclearskies) with a wrap project I'm working out, thanks for all your videos, they have helped me so much. Looking forward to more.
Yeeeeeeeee!!!
Justin pate would aprove lol 💪🏻
Fuuuuuuck like you said skipping hinges, or maybe just thick coat of plasti dip on the hinges ??
Great video. Subscribed!
Thank you for subscribing! We are glad to have you here!
Sweet now you can seal in the water and dirt and when it gets freezing it can freeze shut. Awesome. Job!!
what knife is that
deep clean set from OXO
Great work. And you are so sweet and inlove. I like it. Greetings from Bulgaria ;)
God dammit Cheryl get out of here!! 🤣
TheSeriesofTubes this is my moment Cheryl! 😂
I just subscribed so fucking hard
🙌🏼🙌🏼🙌🏼🙌🏼🙌🏼 sending some love Glasgow Scotland UK
20min x 12=🤑🤑🤑
Fawwwwck this.
20 to do a hinge is bullshit.
I couldn't do it lol.
👍🇨🇦
Nice job on the hinge but that is not a good effective way to wrap it. Shits gonna fall off, peel, and bubble guaranteed.
Like you know
Great vid!! I had a question I bought some eBay 5d carbon fiber. It’s very thick and hard to Install. How is sott elemento 6 carbon fiber ? Is fairly easy to install?
Vasquez_david normally it's from Ebay it's a non comfortable, non air-release material. Sott Elemento 6 is my number one choice for printed carbon, which has both of those aspects. However, it has been on backorder for over 1.5 months. I have been using Weprintwraps.com printed carbon, comes in avery or 3m, gloss/matte lam. No minimum order, shipped straight to you. Try that!