76 Series Landcruiser Flare Kit Install - WA Camping Adventures
Вставка
- Опубліковано 18 вер 2017
- Gday Folks!
Something a little bit different but this is just a quick video on how we installed a Kut Snake flare kit to Pete's 76 series Landcruiser.
Please enjoy and let us know what you think!!!
WA Camping Adventures on Facebook - wacampingadventures
WA Camping Adventures on Instagram - wa_camping_adventures
Can anyone tell me please will these fit with arb scrub bar set up?????loving the show to guys you keep getting better and better
Gday blake! Mate i am honestly not sure if it would, i have pinned your comment so hopefully someone can help brother. These stick out about 70mm from the body mate if that helps!
Pro tip if you can be bothered. After drilling the holes remove the flare again to coat the new holes with paint/antirust/some form of non corrosive sealant if you plan on keeping the car or care about doing a good job.
I can respect a bloke that starts a video with a g'day and a beer.
😂😂😂bloody laughed when i saw this comment! You seem like our type of bloke! Thanks for the comment mate!
Got to love it when you measure a job with beers. I remember a time when distance was measured that way. Scary to think about it now. Good job fellas.
Gday bob! Yes i know what your saying, shit has gotten way too serious now mate! The good old days hey! Thanks for watching mate!
The flares look sick, good job mate. Looking forward to the next video
Thanks eddy! Look a bit more mean than the other ones. Thanks for the comment bud and loving your channel content also!
I found it best before installing, fill these guards with plumbers expanding foam spray. This gives the guards a lot more guts and stops them from cracking if you give them a nudge whilst off-roading. Remember these bad boys stick out nearly 70mm and are prone to a few knocks and scrapes. I have these on my GQ Patrol and no cracks so far. Hope this helps as they are bloody expensive to replace.
James mate that is a mint idea mate! Yeh my flares have taken a beating and touch wood, have held up lovely so far! Cheers mate
This is excellent. Thank you!
OCAM 4x4 Accessories not a problem i hope it helps in some way! Great bit of gear! Thanks!
Hi,
Great Vid.
How'd you gap the rear two pice flares?
Nice install video, have to suss out if I can get some for my little suzuki.
Have to admit though, Pete you didn't say "bloody" even once.. had my beer ready and waiting too 🤣
Hahahaha legend. Suzuki will go anywhere you want to go light as a feather!
@@WACampingAdventures mate it's my first 4x4 and I love the little beast..
Next time you fellas are in the south west coast of WA I'd love to shout ya a beer. I'll make sure there is coronas and the old bush chook!
did they come with the moulding or did you have to purchase that?
I really like the fenders on the 70 séries but drilling hold on body is a invitation to rust
Interesting. I bought a kit for my 75 series troopy and the fitment is awful. Cannot get them snug under the wheel arch, it’s like they’re too “short” so they dont meet the guard at one end. They sit off the body too far to get an accurate pilot drill in there and when you finally do get to push it close to the body (with a lot of force!) the bloody seal slips off the flare, so you have to start all over again. Makes it a hard job! Gonna keep trying.....
oh righto mate i have never fitted them to a 75 and honestly was unaware they made them for 75 series, hope you got it sorted
Are these wider at the back so you can run the wide diff or -50 offset rims?
Gday michael, no mate these arent wider out the back BUT i have -50 rims and they basically sit flush so these are a perfect size for that! Hope this helps mate!
Hey Mate,
How wide are the flares?
When I put a friends 285’s on , with the rear rim having a negative 50 or 55mm offset to align the rear track with the front.
The tyre comes out 80mm from the body of the vehicle on the rear,
And come out 50mm.
????let me know, cheers
Gday mate mint question, id say they are pretty in line with the flares brother. Check out some of my latest vids, i have changed to a neg 55 on the rear and you will see the clearance better. I hope this helps brother! Cheers
Ps i think they are 70mm wide
Thanks for the reply 👍
Subscribed!
Bloody legend thanks mate!
What size drill bit did you use to drill into the panels mate?
Gday mate! From memory it was a 6mm
WA Camping Adventures cheers
Biggie MTG all good mate
Just won't wonder... What did you do to prevent corrosion from occurring in the old holes?
Dahrin mate we spread a little silicon around the holes!
Just wondering which type of Kut Snake flares they were monster ABS or the standard size ? Also how big are your wheels ?
Gday mate! My wheels are 285s brother or 33” round a bouts. Im pretty sure the flares are standard size. Around 60-65mm. Hope this helps mate!
@@WACampingAdventures Thanks mate
Will these fit my Honda?
Lol for sure mate!
WA means wakanda ? Are you doing your adventure in África 🙂
Hi jake no mate WA stands for western australia where i live mate! Thanks for watching!
You better believe I'm getting some tips off this vid 😂😂
Hahaha nice my brother!