You should pre fill the filter housing with oil before starting it, you want that filter fully saturated. Do NOT change the transmission fluid every 30 thousand miles, youll be losing any debris from your friction plates that is needed to create the apropriate friction. Every 60k miles is what you want to shoot for
Thank you for sharing 🌹 I did bleeding break fluid for my camry 2021 after job done i see leaking a small amont of fluid arround three bleeders screws i try to loose it and tight again but still i see the leaking just when i but my figure on screw not droping and the level in master is same no can you advice (thread sealant or after market screw )also the break padel feel spongy now
you have gotten air into the system. Probably from the leak of the bleed screw, as you mentioned. It is very problematic on cars that the screw will leak once it is loosen. Thread sealant will not work as the fluid is so corrosive.
You just have to have a few specialized tools. They’re worth investing in if you own this vehicle versus the stealership/shady mechanics. It’s really not that difficult though. And plenty of information at your fingertips.
Dude, this is amazing. You are very thorough, articulate, and precise with your explanation of each service.
Glad it was helpful! Thanks for watching
Thank you for showing how to services the camry the right way. Very help full. Continue to bring more content about this vehicle. Thank you.
Thanks man, I will as much as I can
bro we don't have like your type of mechanic. really you are genius
thanks for watching
You are blessing for DIY community
Thanks brother
Very thorough , clean, easy to follow step-by-step explanation of each process. Thank you for making this awesome video!
سلام عليكم.
متابعك من امريكا.
ماشاء الله تبارك الله رجل بارع
اشكرك
This is the best video I ever I have seen I hope the video is for Toyota Yaris thank you so much for helping with the Best video.
Thanks, I will try 🙏
So thankful for this video!
Thanks for watching
Wow superb thanks a lot bro for clear details watching your videos will make me a great mechanic 😊
Thanks for watching
You should pre fill the filter housing with oil before starting it, you want that filter fully saturated.
Do NOT change the transmission fluid every 30 thousand miles, youll be losing any debris from your friction plates that is needed to create the apropriate friction. Every 60k miles is what you want to shoot for
Even for drain & fill work?
@chiefdan07 if you're just draining the oil, it's not necessary
2017 camry. 90000 miles. Didn't change yet the transmission.flued Any suggestions. Is it safe to do now. Thanks.
@@anwarparvez3982it should be fine to change. Go check out the car care nut. You should only do drain and refill
Thanks your video. Good job.
Thank you
Thank you so much for your generosity in helping people.
Thanks brother
Thank you so much ❤ have a nice day brother ❤ love from morocoo ❤
Thanks
@@AliMECH you're very welcome. God bless you and your family.
I have one of those brake fluid testers never seen it read higher than two lights lit are you in a really humid area?
Do you recommend changing the trans filter?
Yes, but I didn't do that in this video maybe next video I will for sure
Man, thank you for sharing! Do you know if this will apply the same for a 2017 Rav4? Blessings!
Thanks, yes, pretty much same
Thank you , very good video
Glad you liked it!
Thanks a lot
Most welcome
Good explains
Glad you think so!
What size extension did you use for the oil filter drain plug?
Why don’t you out back in exactly the amount you took out ? Most of you over fill it and drained it again and call it ovetflow ?
Thanks men, blessings
Thanks
This engine has no bleed port?
Thank you for sharing 🌹
I did bleeding break fluid for my camry 2021 after job done i see leaking a small amont of fluid arround three bleeders screws i try to loose it and tight again but still i see the leaking just when i but my figure on screw not droping and the level in master is same no can you advice (thread sealant or after market screw )also the break padel feel spongy now
you have gotten air into the system. Probably from the leak of the bleed screw, as you mentioned.
It is very problematic on cars that the screw will leak once it is loosen.
Thread sealant will not work as the fluid is so corrosive.
Aren't you supposed to pre-fill the Oil Filter with your new Motor Oil before putting it back on???
No need to, on these small engines, the oil pump will fill it in a second
Good video but every 30k miles seems excessive. You can change the transmission fluid too often. It's not like engine oil.
Would the transmission maintenance be the same on 2012 to 2014 camry
It’s generally every 60,000 miles.
Sup homie?
My camry se is consuming motor oil faster between oil changes, do you think i should use a heavier motor oil or what else could be ?
Camry se 2017 50,000 miles
No, you don't need heavy oil, you must have problems with valve seals or piston rings, is you car smokes blue?
@@AliMECH so I was going to do an oil change and I noticed a small oil leak, what do you recommend?? The smoke is white
😭
Do you use regular water to flush it?
Yes, but the last one is distilled water, but you can use regular, but make sure to drain all when you put coolant
@@AliMECH on the spark plug, do you remove the washers in the spark plug or keep them on? There’s 2 washers
what is the cost of motor oil in toyota
$40-60
Each service cost about $200+ except for the oil change around $100. How come you dont buy super long life coolant thats premixed
That's alot for that oil changes, at that time, I couldn't find but what they had at toyota dealership
8:14 Muslim the prayer right
Yes
@@AliMECHthank ❤
Don’t forget the differential fluid
🙏
It's harder than I thought 😕, thanks anyway
You just have to have a few specialized tools. They’re worth investing in if you own this vehicle versus the stealership/shady mechanics. It’s really not that difficult though. And plenty of information at your fingertips.
And don’t pay attention to the oil catch can thing. That’s an aftermarket install. Good to have but not necessary.
Hi. What is the filter housing wrench size?
Great video