Thats funny u should say that because I just got everything in to make it brushed and was going to swap out the servo with a 444 while I was at it. However this servo has performed very well👍👍
There's a few different ways but the best way is to run the back one on a 3rd channel and set that channel up as a slave channel for channel 2. Once u do that u can program channel 3 on a switch and give urself dig as well as under and over drive. Just make sure to disconnect the power wire on one of the ESCs auxiliary wire so u don't fry anything. I hope this helps👍👍
Ha, no not crazy, every rc guys wants his/her own indoors rock crawler course. Brilliant. Liked and subscribed. I'm considering buying a bully 2, but it's a lot of cash, can buy a small real car for the same price. Um...
Let's jump in the way-back machine... 10 years ago, monstrous competition crawlers like this were pretty common. They also cost on average, three times what this one does!! I have a Bully 2 as well. It's the fulfillment of my RC crawling dreams!
@@fxrc3086 I chose Holmes hobbies electronics. Matched 13 turn crawl masters, the SHV500 V3 servo, and his BR mini dual speed control. It's going to be ridiculous!
Besides the bully 2 kit and Traxxas TRX-4 shocks and Vanquish 20mm servo horn its just the 2 castle Creations mamba X ESCs and 2 Holmes hobbies puller pro 540 moters and a savox 2290 servo. So I only added Electronics but Ive changed it to a brushed system and a reefs 444 servo since this video and It seems to be a better setup for this rig👍👍 videos coming soon... thank you
I think for the price there great batteries. As long as you take care of them with always storage charging and balance charging them they've been lasting me a long time with no issues👍👍
@@fxrc3086 I'be just received them, and I have to say that pot the price they are worthwhile. The claimed capacity is right, and the range on my comp crawler is really good. Thanks for having responding to my comment, your video is really interesting though !
Great video. I’m considering one of these to take a break from scale crawling. Performance on these looks really good.
Thank you. This incredible rigs performance is out of this world. 👍👍
Shouldve gotten a reefs. Their specs are on point. The raw 500 is bad ass.
Thats funny u should say that because I just got everything in to make it brushed and was going to swap out the servo with a 444 while I was at it. However this servo has performed very well👍👍
I’m new to crawling. How do you run both motors off of the mamba x esc and control them separately
There's a few different ways but the best way is to run the back one on a 3rd channel and set that channel up as a slave channel for channel 2. Once u do that u can program channel 3 on a switch and give urself dig as well as under and over drive. Just make sure to disconnect the power wire on one of the ESCs auxiliary wire so u don't fry anything. I hope this helps👍👍
And there's 2 ESCs wired into one xt90 with one plugged into channel 2 and one with the power disconnect on the Aux plugged into channel 3
Ha, no not crazy, every rc guys wants his/her own indoors rock crawler course. Brilliant. Liked and subscribed. I'm considering buying a bully 2, but it's a lot of cash, can buy a small real car for the same price. Um...
It is alot of $$ but it's definitely super nice crawler 👍👍
Very nice need to put two Hobbywing 1080’s in it
Thanks... Ive thought about doing that but I really wanted it to be brushless
Can you upload a wiring how to for moa
Let's jump in the way-back machine... 10 years ago, monstrous competition crawlers like this were pretty common. They also cost on average, three times what this one does!! I have a Bully 2 as well. It's the fulfillment of my RC crawling dreams!
@@notice_fpv this Rig is absolutely incredible, its capabilities are insane. So much fun!!👍
@@fxrc3086 I chose Holmes hobbies electronics. Matched 13 turn crawl masters, the SHV500 V3 servo, and his BR mini dual speed control. It's going to be ridiculous!
Have you changed out the battery in the smoke alarm yet?? lol
I have😂
I'd like a build list
Besides the bully 2 kit and Traxxas TRX-4 shocks and Vanquish 20mm servo horn its just the 2 castle Creations mamba X ESCs and 2 Holmes hobbies puller pro 540 moters and a savox 2290 servo. So I only added Electronics but Ive changed it to a brushed system and a reefs 444 servo since this video and It seems to be a better setup for this rig👍👍 videos coming soon... thank you
@@fxrc3086 thank you would love to see the updates
How much runtime are you getting with the 1500mah battery?
It depends but average time is around 18 to 20 minutes but i just swapped out to a brushed system so im hoping that will improve 👍👍
Are tou satisfied of these zee batteries ?
I think for the price there great batteries. As long as you take care of them with always storage charging and balance charging them they've been lasting me a long time with no issues👍👍
@@fxrc3086 I'be just received them, and I have to say that pot the price they are worthwhile.
The claimed capacity is right, and the range on my comp crawler is really good.
Thanks for having responding to my comment, your video is really interesting though !
@@lopiklemoustique5513 thank you my friend and anytime... 👍👍
Yes
I like it