Це відео не доступне.
Перепрошуємо.
Rotary Shifter Go Kart First Drive! | Full Send and Warehouse Drifts!
Вставка
- Опубліковано 1 чер 2019
- ***DG Aluminum Silencer - www.dgperforman... **
Today the rotary rips for the first time! This rotary go kart is powered by a 1975 Hercules W2000 motorcycle and is a complete monster for this small go kart frame! In order to get this thing driving we needed to add some more bracing and fabricate a custom exhaust for it. While it doesn't seem like much, it took us hours to get everything working properly and doing its job. With this, we took it to a really cool spot and we were able to properly thrash on the go kart and burn some fuel and rubber!
Thanks for watching and be sure to stay tuned for the rest of this build!
*Be sure to check your local laws before driving any non-registered motorized vehicle. Do not attempt these activities at home. All content produced by Build Break Repeat is for entertainment purposes only*
---------MUSIC --------
Music - Background and Montage Music Is From Endemic Sounds
www.epidemicso...
-----------MERCH------------
MERCHANDISE CUSTOM DESIGNED BY YOURS TRULY
teespring.com/...
------------PARTS--------------
Seat - www.gopowerspo...
Battery - www.gopowerspo...
Axle - www.gopowerspo...
Bearings - www.gopowerspo...
Rear Wheel Hubs - www.gopowerspo...
Front Wheel Hubs - www.gopowerspo...
Brake Disk - www.gopowerspo...
Sprocket Hub - www.gopowerspo...
50 Chain - www.gopowerspo...
Tie Rods - www.gopowerspo...
Rear Wheels - www.gopowerspo...
Front Wheels - www.gopowerspo...
Rear Tires - www.gopowerspo...
Front Tires - www.gopowerspo...
That's one damn good looking Dorito powered machine
I wonder if it's nacho cheese or ranch flavor?🤔
@@conner5611 Gasoline and Carbon Dioxide flavor
monoxide :)
Lol
That thing is bad ass, you guys have to do a top speed run!!!!
11:35 rev limiter! Sounds awesome!!
it did sound real good. i thought rev limiter too. r u sure it has one? if so.. u r right (awesome!
@Harry. B. Renner. jr. Umm? I had an rx7 (12A engine) and broke it because it did not have one.
It sounds so crisp. You guys have raised the bar on builds. Its going to be hard to beat your creation. Great job guys. You have made the impossible possible. Congrats.
It's a cool cart no doubt. The fact that you guys took on the rebuild of a rotary engine is what is the most impressive! There are lots of veteran and seasoned mechanics that wouldn't attempt it so two thumbs up young bloods.
When you paint it, should get out the buffing wheel and polish up that engine and trans. Would look like a chrome jet engine!!!
dobby15845 i was thinking the same!
Wow I'm impressed! Can't wait to finish mine 😁
Vasily Custom Builds Hey keep your head up. Hope you have a speedy recovery we’ve been prayin for ya.
@@BuildBreakRepeat that's awesome brother thank you!
We need to get all the go-kart guys together sometime in the DFW area at some abandoned area like that to have a play day
I can't believe how awesome this thing sounds. at idle it kinda fools you sounds a bit like a normal 2 stroke, and then when it rips its like oh shit.
You should go somewhere we can hear it shifting! Sounds awesome tho
Oh my God it's even better than I thought now all it needs is a sick paint job
and a turbo :D
You guys and Grind Hard Plumbing Co have captured my imagination outta all the stuff like this I watch....and I do watch the other popular ones too.
Cars & Cameras and Red Beards Garage are good ones too.
@@davidmathay7117 definitely on my list.
Y’all need to rip that thing at night so we can see the flames!!!! Great job boys you rock
We did it guys...there were points during the engine rebuild where I never thought we would see this thing rip but here we are 😎.
NOW LETS GET THAT 100k!!!
*edit- 100k THANKS SO MUCH GUYS*
That JDM kid keep grinding my dude it’ll come 💯
reminds me of this: www.swissrocketman.fr/wankel-turbo-kart,fr,8,53.cfm
@Ethan Stefanisin it is it think
You should run a little bit of premix for the apex seals. Sick build
@MrZep420 most likely but i think they got it from the frame or just bare engine check the first video
A real nice backdrop location for the first trash down of the kart. Keep up the great work too.
Been waiting for this. That's one PISSED off dorito cart!
Great job guys, the hard work paid off. I love how it blows the tires away once it's up on the classic rotary powerband!
So glad to finally see this thing RIP! Awsome job guys, I love it cant wait to see more videos.
Great work guys!! this video is definitely going to blow up. Awesome kart!
The intro was next level and the cart lived up to the hype and then some. Great job guys.
Thank you for not dragging this out to 20 videos
As a rotarhead through and through, this warms my little wankel heart. I started watching y’all on the episode you started tearing everything down and troubleshooting. I’ve gotta say, you guys rock! For a garage of teenage friends, you guys created something truly epic! Wish I had that kind of skill back then. Can’t wait to see the next big project!
One of the best sounding carts I've ever seen. Awesome job fellas
4:30 what a perfect location for a haunted house. Way to go guys. Your fabrication skills are coming along nicely!
Definitely come along if you watch their first couple videos.
You need to Rev it to the moon like a rotary is built for!
Amazing work excited for next video
absolutely! they don't even start making power below 6k rpm.
That thing looks insane! Even on camera it looks wicked fast!
Amazing you guys found a Rotary engine rebuilt it. Then built a just as amazing buggy for it congrats. Nothing else sounds like rotary exhaust gets 👍🏼.
Guys i just want you to know just how impressed we are with this build i mean wow guys !!! That thing is incredible!! Congrats
U guys gotta Remember that Rotarys power band is all mostly in higher Rpms range...but shes looking awesome nice job..✌
dropping Hertz and it was rippin it in the lower rpm range things mad
So cool! My OCD really wants you guys to clean and detail/paint some more of the details on the kart. I mean the thing is really trick, it deserves it! And! YOU NEED TO GO TO A KART TRACK!!! Do it!
The engine isnt most powerful but the power/weight is good! Good job guys! You did hard work to get that running!
Torille
@@nniilo1917 tietenki!
from my perception, it looks like you may need a little bigger sprocket on the axel, your first gear looks a little tall.
kevin campbell exactly what I was thinking. First shouldn’t last that long and he’s lugging it down low.
Yes! But only after the top speed run! :-)
Heres another problem with both sprockets that small your putting a lot of stress on the chain and the output shaft bearings. As rare as that engine and trans is you may want to put a bigger sprocket on the axel.
Lookin good I actually just woke up to watch this 👏🏽
I am really enjoying your work, I started watching the build from episode 1 and I have never been into rotary motors. I'm waiting to see to see the kart on a track at max speed. Greetings from Spain
You guys are Gods for making literally the best thing someone can build. Been a rotary fan since getting into cars and love seeing this thing. I see your passion for this thang!
This is the best go kart on youtube. You *need* to take it to a track!
It sounds very impressive. You did a great job. Thank You for reviving again this engine!
That's bad ass thought it would take longer to complete this build... amazed you guys have dedication
I’ve been really wishing you well on this build as it’s an extremely rare and underrated engine so you guys deserve a massive amount of respect for what you have succeeded in building so congratulations guys and seriously enjoy 😀
I love how I get to see this awesome go kart on my birthday
Top speed run is a must
It’s sick! Sounds like a perfect and precious fart. Sounds awesome 👏🏿 😍
Fart Kart!
themadscientest lmao
That cant be unheard lmao
....its just instant power with no end....💪💪💪💪
The spirit of Braping is realy strong in u son .
U will go far , never fall in the dark side .
That's fantastic you guys! Great work!!! That go carts gotta be stupid fast man! 😃👍🏻👍🏻👍🏻
The video everyone has been waiting for...
Finally! Looks like a really solid build! Like it a lot!
iv never seen something so beautiful
Those drifty braps at 11:35 are what I was waiting for... Music for the soul. :)
Awesome build guys! Probably one of the coolest karts I've ever seen. Really impressive work and ace videos. :)
Watched the whole series and I am very impressed with your knowledge and workmanship, I think the future is in capable hands, great job guys!
Not to take away from the incredible build, but some fine cinematography in this video!
One Rad Rotary Ripper! Congratulations guys !
Damn guys the project turned out awesome.
These 1 rotor brappers have 3 exhaust strokes per revolution, pretty good for a turbo in my opinion.
Coolest build I’ve seen in long time!
Dream build... Guys it's a masterpiece.
Pretty excited to watch this. I need to get off my ass and go work on my racing mower
Turning off the ramp = man line! 😍
That’s badass great job guys
That cart is AWESOME!!!
That thing sounds fantastic, makin me jealous!
The absolute money that this build is.
Excellent job. Yeah man, gonna need a track that's big it was just starting to get happy when you had to get out of it. Rotary brap is cool, sort bassier than a two stroke but then get into that scream. That fan whine is pretty cool. Proud of you guys for the fix on that engine, you got it done!
-Thought I was gonna die screaming, "Will you just shift?"
Rotary engines are the best at high rpms, so you dont need to shift too early otherwise you lose power
That cart is SO sick
So close to 100k!! Congrats guys
this video and all of them about that rotary go cart is awesome thank you.this just proves the rotary motors were not a failure. is what the mane stream media put out. i use to to have a Mazda rotary car it had a 4 rotter motor in it and was fast as hell.
Hah hah, too cool! When I first saw the inside of that engine, I thought 'if it ever runs again, it won't run very well'. Man. was I wrong! It seems like a torquey little shit, even at fairly low rpm. You'll definitely want to stay a tad on the rich side on your pre-mix so it doesn't seize the rotor. Everything must be seating in well, as it seemed to pick up some power the longer you ran it. With that high gearing, I'll bet it runs 80 mph. or better in top gear at the track! Guys, I'd love to see some paint on that thing. now that you know it's going to run well!😁👍👍
Great job guys. Very unique build.
Thanks guys... I appreciate the effort you put in to making these. BrapCart is beast
Badass man. Happy to see you got it going.
I waited long for this to happen!! *keep it up* Braaaap
Congrats! That is the Dopest Rotary go-kart. Good job fella looks like all the hard work paid off. I want to build my own electric go-kart one day
I’m not gonna lie I thought my wife farted in my face when the video first started LMAO. Rotary life sounds amazing 😉
Bigger sprocket!!!!!... ok =] love this build, seriously awesome!!!
That thing sounds awesome!
With the sound of that motor I could watch this all day!
That intro was sick!
That rev limiter sounds so sweet!
Bad ass. Yall should put on a smog pump supercharger I've seen minibikers do that
Wooo, listen to that rotary rip! 100% wicked.
Awesome videos! Awesome kart! Just keep off the clutch and strap up the helmet... and don't be afraid to rev the thing! Rotaries like it! Hello from South Africa and I wish you guys a good time further!
First the turbo kart and now this, I see a new jdm shirt in the bbr line up!
Lol that bunta Fujiwara part had me lol 😂
Awesome! Sounds like it could do with some lower gearing though, no?
definitely.
Man that is an epic build, what are you kidding me. Should put a two stroke tuned pipe on it.
Congrats I had my living room stereo hooked up with 2 15 inch subs and had it full blast rattling my walls it sounds so badass boys!!! Indiana fan!!
I could just sit and listen to this thing rip all day
hope you guys get that bad boy on a dirt track soon cant wait to see that one for sure
Awesome build ... perfect for a turbo build u think? Rotary's love boost ... just a thought
I would be afraid to hurt a relatively rare engine
Rotarys may love boost but carburetors don't.
@@lastnamefirstname9043 they make carbs for boost ...how many cars with boost and a top hat do u see
@@hankoffroad8178 the fact they make certain carbs specifically to accept boost proves my point that carbs don't like boost. I never said it was impossible. I was pointing out that it's not ideal. But thanks for incorrecting me
Damn.. I want a kart now!
So nice, great job guys!
Played with captions on and i have to say they are spot on, "Music" is definitely the best interpretation for "BRAAAHP BRAAAHP!".
Aluminium exhaust looks cool
Brap brap brap..... Nothing beats that rotary sound🤤🤤
11:35 thats what i was waiting to see, finally someone willing to open it up properly and have some fun. im sure its pretty damn scary to drive, but still. i wouldnt be able to help myself but do that as soon as i sit in the thing.
Look forward to seeing more of this cart. Great job guys
I almost bought the same engine last year, was gonna make my kids a scaled car to drive. Really cool
Sweet cart guys.
I keep hearing about this channel, givin it a shot.
AWESOME!So glad to hear it "braap" in all it's glory! You guys need to find someplace to test it's too speed! (And your own bravery!)
Great job sounds sweet.Maybe a bar across the front to protect your feet though.