Thank you for this video, well presented and very informative, im getting a Z-Tazer and double by pass for my 2012 300c lux, your video sealed the deal for me...great work...subbed. Peace from NZ
You make finding your 10mm socket SOOOOO easy!!! Every time I fork hardware store, legit I buy another one HAHAHA I mush have like a dozen 10mm sockets.
Great video, used if for my install and setup on my 300s hemi and it went flawless. One question though, did your temp. gauge act up after? Mine was a little wonky, the gauge wasn't working but was giving me the number reading. Took the car out later on and was going up past halfway and back down, number was normal just the gauge being wonky freaked me out a little bit. Sorry for the long comment, just had the issue come up and was wondering if you had any issues. Love the channel and much support from a fellow 300 hemi lover
Only 6.1 0-60 time??? You need to push the go-pedal a little harder. 😃 Great overall explanation, though I did see one review where installer noted you needed to disconnect the Tazer after the install period. Not sure if that was before or after the 2 sleep cycles, but they did get the Perf Pages to work. Have you played with the different modes enough to comment on the performance differences between sport/track/eco?
🤣 yeah I didn’t actually do a 0-60 test yet. I’ll get that down. The drive modes are definitely noticeable. Especially Track mode! I like the shift points in Track. Sport is good around the city. Track is better on a highway. I’ve used Eco mode but haven’t tested out the MPG difference yet though.
Yeah I’m pretty sure it will. But mine isn’t AWD so I’m not sure which years it works on. Might want to check out the user manual on their site to be sure.
I have a 2020 Chrysler 300s V8 and I just installed the tazer the exact same way using your video, and the drive modes will not come up on my uconnet screen. I don’t have the SRT option on the screen. I do have the 0-60 timers , top speed, reaction time, etc on my dashboard, but no drive modes like track, street etc on my uconnect screen. I did install the latest firmware before I did the install.
Enabling “PerfSet” in the “Performance” menu should give you the SRT Performance Timers on the dash if you have a 2012+ 300. If that doesn’t work you can try resetting the UConnect system like I show in this video: ua-cam.com/video/RQiAVZvFmtA/v-deo.htmlsi=eQJvZ5PGpQH6cOtE
sur chrysler 300s 2019 tu ne peut pas choisir ton splash sreen et peux tu avoir les page performance sans activer le srt et aussi le track mode sans srt !!!
Installation is simple. The only part that is even slightly tough is plugging in the double bypass. But that’s only because it’s a little tough to see the ports. But it’s a very basic installation overall.
Thanks, so i got mine today and tried to update it but it wasn’t showing me the device name or saying it was unmarried or the serial number nor the version then when i clicked update it never updated and then it told me the device was in bootloader mode and corrupt or something
@@300Reasonsdid i break it already the mac im using dosnt use usb and i have a cheap little adapter but it was wobbly im wondering if it disconnected mid download
So I installed my tazer today nothing is working I've unplugged the fuse numerous times still nothing I unplugged the battery still nothing is showing up on my dash or my radio please help if you can I have a 2019 Chrysler 300s
I love your channel bro, it is soooo indepth and it makes sense for me because I have a 300 as well. Thanks for making good content bro!
Thanks for watching! I appreciate the support!
Thank you for this video, well presented and very informative, im getting a Z-Tazer and double by pass for my 2012 300c lux, your video sealed the deal for me...great work...subbed.
Peace from NZ
Thanks for watching!
You make finding your 10mm socket SOOOOO easy!!!
Every time I fork hardware store, legit I buy another one HAHAHA I mush have like a dozen 10mm sockets.
Trust me, I have more than one as well! LOL
#IYKYK right@@300Reasons ? Great Vid, going to add a Tazer based upon this.
Bro!! You got a new subscriber!, I have a 300 limited 2019 and with this mod looks that it can be more fun!
Thanks! Yeah this is definitely a mod worth doing!
did you have to have by pass for the 19??
300 GANG 🏎️💨 Love my Tazer ! Can’t wait to get a newer model 300 though I feel like you get more options on the newer models
Yeah, I think the newer UCONNECT systems offer a few more features.
Great video, used if for my install and setup on my 300s hemi and it went flawless. One question though, did your temp. gauge act up after? Mine was a little wonky, the gauge wasn't working but was giving me the number reading. Took the car out later on and was going up past halfway and back down, number was normal just the gauge being wonky freaked me out a little bit. Sorry for the long comment, just had the issue come up and was wondering if you had any issues. Love the channel and much support from a fellow 300 hemi lover
Great video, can you show how to enable backup camera
Nice video and awsome content!
Thanks for watching!
Great video and instructions. Subscribed. I'm also subscribed to She Fast.
Great video bro 👍
Thanks for watching!
I'd love to see the brake hold feature. I subbed thanks bro.
Thanks for the sub! I’ll test it out.
Only 6.1 0-60 time??? You need to push the go-pedal a little harder. 😃
Great overall explanation, though I did see one review where installer noted you needed to disconnect the Tazer after the install period. Not sure if that was before or after the 2 sleep cycles, but they did get the Perf Pages to work. Have you played with the different modes enough to comment on the performance differences between sport/track/eco?
🤣 yeah I didn’t actually do a 0-60 test yet. I’ll get that down. The drive modes are definitely noticeable. Especially Track mode! I like the shift points in Track. Sport is good around the city. Track is better on a highway. I’ve used Eco mode but haven’t tested out the MPG difference yet though.
Enjoyed your video. I have a 2013 300 awd hemi. Will the Tazer allow me to toggle awd on and off? Right now its set to engage at 39°.
Yeah I’m pretty sure it will. But mine isn’t AWD so I’m not sure which years it works on. Might want to check out the user manual on their site to be sure.
Thank you
I looked at the video again and saw the Force AWD section, it explain it. Thanks again for this video.
Does the srt pages option makes the air bag light come on?
Question does the z automotive give you the check engine light? And is it a bad thing??
How did you get the SRT Dashboard to show up? I have the perf pages
😎Great Content, Thnxxx😎
Thanks for watching!
Wonder what would happen to put this on a pentastar would you get the same options..
Good question! I’m not sure.
tazer bug not drv mode uconnect chrysler 300s 2019 help
Good video buddy. Any chance collaborate with you on an LED review?
Thanks! I'll reply to you on Instagram about a collaboration.
I have a 2020 Chrysler 300s V8 and I just installed the tazer the exact same way using your video, and the drive modes will not come up on my uconnet screen. I don’t have the SRT option on the screen. I do have the 0-60 timers , top speed, reaction time, etc on my dashboard, but no drive modes like track, street etc on my uconnect screen. I did install the latest firmware before I did the install.
It worked 😅. Just took a lil time to come up on the uconnet screen. Great video
Yeah it takes a bit for it to show. Enjoy!
Can’t get the srt app on display dash but I updated everything
Enabling “PerfSet” in the “Performance” menu should give you the SRT Performance Timers on the dash if you have a 2012+ 300. If that doesn’t work you can try resetting the UConnect system like I show in this video:
ua-cam.com/video/RQiAVZvFmtA/v-deo.htmlsi=eQJvZ5PGpQH6cOtE
How long did your update take to finish?
I let it sit overnight. But it can take a few hours for Performance Pages to show.
white and green and green white connect !!!!"
je me demande sur 3.6l et 5.7l tu semble ne pas avoir la lumiere airbag open il dise que si tu active le srt tu as le airbag oui ou non merci...
sur chrysler 300s 2019 tu ne peut pas choisir ton splash sreen et peux tu avoir les page performance sans activer le srt et aussi le track mode sans srt !!!
Question, should i keep my tazer plugged in in the trunk or should i move it to the obd2 port under the steering wheel??
I recommend the trunk because it will be harder for a potential thief to get to it.
@@300Reasons alright cool and assuming it’ll also allow me to run a tune along side with it
@@300Reasons also how did you get your shortcut to say “SRT Dashboard”? Mine is stuck with “Performance”. I have a 2019 5.7 300
Overall What Would You Rate The Installation process
Installation is simple. The only part that is even slightly tough is plugging in the double bypass. But that’s only because it’s a little tough to see the ports. But it’s a very basic installation overall.
Hey can this unlock the radio too ?
It doesn’t add any radio functionality. It will add Performance Pages on certain model years.
I’m having a problem updating my u connect did u not have to update
Updates happen automatically. After connecting the Tazer it may take a few hours for all options to show up.
@@300Reasons I’m saying every video I watch say u have to update the u connect before useing your taser
Do think this install will affect the factory warranty?
No. But, you can just return to stock and unplug it when you get your vehicle serviced to be sure.
When buying a used car there is no warranty. Unless you’re buying it new, there’s no worry about warranty
@@jayybizz_extended warranties do exist..
Does this voaid warranty
No it won’t. You can disconnect it when your car is serviced if you’d like though.
Does it take off the speed limiter?
No unfortunately it doesn’t. I think you’d need a tuner for that.
did perf pages work with any new updates?
i have a 2013 300c btw w vid
Does it get rid of the apple carplay screen??
No, you still have Apple Carplay
Thanks, so i got mine today and tried to update it but it wasn’t showing me the device name or saying it was unmarried or the serial number nor the version then when i clicked update it never updated and then it told me the device was in bootloader mode and corrupt or something
@@300Reasonsdid i break it already the mac im using dosnt use usb and i have a cheap little adapter but it was wobbly im wondering if it disconnected mid download
I’m not sure. I never heard of that happening. Maybe the Tazer is defective.
I’m trying to find a rear srt bumper for 2012 but the 2015 version if anyone as any links or information in Florida let me know asap
I’m not sure. Hopefully someone can help you.
@@300Reasons appreciate ya
Does launch control work tho?
Yeah it works. I already did a separate video on it.
So I installed my tazer today nothing is working I've unplugged the fuse numerous times still nothing I unplugged the battery still nothing is showing up on my dash or my radio please help if you can I have a 2019 Chrysler 300s
Are you able to see the Tazer menu options on the dash?
@300Reasons No sir, nothing the Tazer powers on flashes red a few times then to green.
@@jaytime300s8 did you update the firmware on the Tazer first?
@@jaytime300s8 might be defective too. You may need to contact Zautomotive support and get a new one.
@@300Reasons no do I need to do that first?