50mph+ with 70cc Minarelli! | Motorized Bike Part 2
Вставка
- Опубліковано 24 лип 2024
- Subscribe & Bell for more content like this!
Support: ko-fi.com/trentbikes (APPRECIATED!)
Discord: / discord
Instagram: / trent.bikes
MB stuff you can buy: www.amazon.com/hz/wishlist/ls...
$200 CMB Minarelli: www.californiamotorbikes.com/...
$200 Beach Cruiser: retrospec.com/products/chatha...
0:00 Intro
2:00 "About" my bike
3:31 Cat :3
3:45 Mods/Upgrades
6:03 36T Break In Ride (40mph+)
7:50 Cylinder inspection
8:19 Issues to fix
8:39 36T 40mph rides
10:33 Warm up (listen to that idle!)
11:11 36T 40-45mph rides
15:02 New temp sensor holder thingy
16:03 40T 40mph (boring)
17:30 32T 50mph+!!!! (FUN)
tags (ignore)
super fast motorized bicycle, fast motorized bicycle, motorized bike tips, avenger 85 motorized bike, minarelli 70cc motorized bike, 100cc motorized bicycle upgrades, cheap motorized bicycle, how to make motorized bike faster, motorized bicycle top speed, 80cc motorized bicycle upgrades, fastest motorized bike kit, 100cc bicycle engine kit, la hover bikes, felt faker gas bike, 70cc athena motorized bicycle, athena motorized bicycle, 50mph motorized bicycle, 60mph motorized bicycle, 70mph motorized bicycle
#motorizedbike #moto #motorizedbicycle - Ігри
I actually find you super entertaining and wondered about your voice because I thought you had an accent but that was it! I freaking love watching you, I don't even understand how the bike goes that fast with your freaking massive balls you're hauling around 🤣🤣 but yeah, those people making comments about your voice, need to worry about themselves!! You talk freaking amazing for your circumstances and you are an extremely impressive person. I wish I knew half the stuff you know about these engines and I learn so so so much every single video so it keeps me coming back! You had a subscriber in me after literally the first 5 minutes of the first video I watched that you had made, so yeah, I have been nothing but impressed, keep being awesome bro.
lol ty
Your voice is fine.
Many UA-camrs with many subscribers have the same sound/ accent.
But it s a shame you can't hear how nice the bikes sound. Do you feel vibrations to feel rpm if you ride geared bikes?
I think the way you talk makes you unique and keeps bringing me back to watch more of your videos. Not to mention I like the mechanical stuff you tinker around with trying to improve or make more power. You have good content. 👍
thanks man
That sounds really good, very nice work!!!Mint!!!
bro awesome build, ive never been on anything motorized but watching your vids, as gotten me very interested in the hobby. keep up the great work
I love your vids man I just got into this stuff a couple weeks ago and I bought my first one 4 days ago your vids have helped me understand much more about these engines
Hmm I just got my buddy into this about a week ago and he orderd his motor 4 days ago to but his already showed ul
@@theLyzhendricksmine arrived today
Nice are u ganna make vids about it?@TheAveragedude0
@@theLyzhendrickshopefully I will I’ve already posted about it on TikTok and I’ll be making some on yt shortly
@@TheAveragedude0 what's ur tik tok I'll add u
Awesome bike man with the Minnie. I can tell You're very intuitive
This video is amazing! I like Your determination on going faster and faster! Thats what these little motors are made for! I really enjoy the content my friend. Keep digging for more speed. and stay safe out there!👍
I have newer videos going 60mph+
Great job on the bike and video. Thanks for sharing man.
thanks
Help full bro.i have had all the same problems. I'm proud to say my minarelli is running like a beast. Keep it between the ditches rubber side down. Much love
ua-cam.com/users/shortssEXHAJF6Ha4?si=5rvJ7h52rqg5tOk3
Much love and much respects to u u speak good bro and ur video always help just wanna say appreciate ur time to make video they have help me very much again thanks
Thank you for your videos, your content is great
Appreciate it
Nice Work Bike Sounds Great, Parma kit cdi sounds better, try it before trying the time plate but both work really well together 👽👍🏻 Get the Smolik Timing Plate
ok will do
Yo your voice is awesome dude especially when I'm high I get good information, funny edits, and funny reactions keep up the good work
I kinda miss being high, it's pretty fun tbh (besides sitting all day on PC doing the same thing for years) but the anxiety/paranoia man, but thanks!
Love your vids! nothing wrong with your voice!
Keep the videos coming brother. Just subscribed
thanks, ill try to
I love the sense of humor. Subbed
thanks
keep making videos dude you got something good love the builds and the videos
Sick bike Man! love it!🏍🏍🏍🏍
thanks
Dope video bro much love
thanks
Oh shiza, walk of shame. Thanks for the ride.
Leonard you forgot to welcome him to the 50 mph Club 😁 👽👍🏻
@chadstewart6005 pulling a bbf? what did he do lol
@chadstewart6005 I see. Yeah not a fan of bbf, he makes shit content tbh and like half if not most of his info or tutorials is bs as far as I've seen. The crank balancing tut video was so confusing and taking up a lot of space. 2stroke stuffing's vid was much more helpful. Honestly the only.videos I will watch of him is the stuff he builds, like customs etc to get an idea. I did that to get an idea of customizing my pipe to fit
@chadstewart6005 got a video of that btw? him going 20 and rigging 50 lol
whos ERT?@chadstewart6005
Great editing man
thanks
Running strong 💪🏾👍🏾I like it!!!
Hell yea
killin it man
sweet build
Dude, both my grandparents on my moms side were deaf. My first language was ASL way before I could speak English. And when I did learn to speak two of the most important people in my life sounded like you. I love your videos and have no trouble understanding what you say. Keep up the great work my man!!!
Appreciate it
I'm not native english speaker. And i spend all day long for watching one video to get understand what is he talking about, with help of automatic titles. It is so hard to me!! I'd be so much appreciated if he would apply accurately prepared english subtitles, once he has this kind of speaking problem....
Great video brother n we all get the hater’s on our channels ignore them you have a good channel n good content keep up the good work brother ride safe bike life
Yep, I have experience with haters on my main channel since like 2017 now so no problem haha. Thanks though
you inspired me to continue my bike build
glad to hear that
Nice rips.😄👍
thanks
love your cat helper 😊 looks like my oldest I have 4 helping me round up my screws while I try and fix my jack az shaft ..lol
lol yeah shes adorable
Really nice!!! I can`t wait to see more videos of you riding that beast!!
I wanna do more to it, maybe swap the cylinder or something
Yes, sounds great. Do you know how I can make mine faster on low budget and without those grinding tools, I sadly do not have those. Also do you maybe know how I can make it rev higher?@@trentbikes
@@zReXzSuprAz Stock carb and exhaust?
At the moment yes.@@trentbikes
@@zReXzSuprAz you can drill multiple holes into the filter cover for more airflow (people just take the filter and cover off, but i don't suggest doing that because of rocks getting in etc and ruining your motor), take the cap off the exhaust pipe for more power (probably double) for way better torque, but also maybe increase speed a little bit. you need to re-tune the carb though because doing that will definitely make it more lean or something. tuning carb (swapping jets making it a little bit rich or something) will help also.
I highly recommend a high end mountain bike from the early 2000s. I have a 02 Kona muli mula and it’s amazing. 28 speed adjustable brake levers frame is solid af. Shocks are nice and soft has mounts for disk brakes. And finally the engine fits without the u bolt setup.
Felt faker bike VERY soon.
Also no one wants multi speed. You really only need one gear.
Very cool brotha🚀🚀 you were on that throttle she didn’t mind😎😎
hell yeah, though that's only half throttle. anything past that it either doesn't make any difference or starts losing power. carb isnt tuned correctly, dont think i can do it while i most likely have vacuum seals. waiting for new balanced crank then i can replace the seals and bearings (crankshafts are damaged so it doesnt matter if i replace them)
@@trentbikes That sure does sound like an air leak. I have one on my saw right now and she does the same after half throttle i loose a tiny bit of power but try not to ride yours if there’s a leak it’ll just cause damage and could end hurting almost everything. You might have it too rich because of the air leak
GOOD STUFF
Your crazy dude like your videos
good content
Thanks
Have you tried using a boost bottle for the top end so you don't have the red bean in and out sensation at it helps with the pulse
no, i dont wanna have to buy them every time or something
I like your videos you do a very good job of explaining everything, I think you will be getting monitized soon!
I try my best man, thanks
Hey bro just sub. Very good work. I need to go back and watch your first video again. How long have you been at the motorized bicycle game? Also your editing skills are on point. ❤ Happy Holidays 🎉🎉🎉🎉
since sept, but thanks!
my god thats fast !!!
hell yea and i wanna go faster!! lmfao. maybe not on my current bike without proper upgrades
The tach meter stops working not because of vibration, but probably because of RFI as my dad said. He had the same issue with his electronic carburetor. Didn't matter if I plugged in just the temp, or just the wire on the cable, it would still freak out. With them disconnected it works just fine while riding. Smh.
Very cool. Are these engines themselves good with sitting at 9k or 10k rpm though? or will it cause damage? I know a lot of motorized bike engines are very finicky and can break at upwards of 7k rpm, wb this tho?
it's the crank bottom end bearing you need to worry about.
Apparently it's common for frames like mine, for the small pipes (under the seat) to crack due to vibration of the motor, even if it's balanced. Galaxy in b0r3d's dc server had the same thing happen to him, one cracked behind the welds (just like mine), the other is developing a crack. This is why I wanna build a felt faker.
He did say that balancing the motor will definitely make it last longer. Well, I guess I will keep repairing it until I get a felt faker. Or until to the point its no longer repairable anymore. Maybe I could custom it with some small thicker pipes? Replace the thin pipes?
I’m just starting research for my first build. One thing I’ve noticed is that a lot of people on here and the ones I see around town all have crappy frames. I get that good frames are more expensive but so are hospital bills.
🍿🍿
He's riding that like it's a grom
lol
A chain (420) instead of one (415) would you do?
The bike sounds awesome. When It gains speed its Just music
The clutch sounds awesome
I like your vids, ignore the people commenting on your voice. You gave some good advice for me. I will prob be building a motorized bike soon. How do you get your income? How do you sponsor this build?
Ssi, disability checks. I wish I was sponsored by companies lol
❤
RDM two-stroke bicycle engines they got 11 Tooth sprocket, or if not 12 Tooth Dr. sprocket maybe a 28th tooth rear sprocket
Where you deaf before or after the 70cc Minarelli???!!! Much love brother.
Lol born deaf
Im sry people hate on u fod somthing u camt controll nice bike tho cant wait for more vids
no problem just wanted everyone to know
You talk absolutely fine for a deaf guy
thanks
Bro is that you who posted in facebook group that your engine ckutch is slipping so hard?
Ignore comments ur voice is lit fine
very nice build brother. I love that pipe that you have but please fix your frame soon and use a real helmet it is summer here where I live, and it is 110 outside
this is half a year ago. I'm not using the bike anymore.
You're cool bro
appreciate it
Did you balance the crank?
no, waiting for will zink to send me a new balanced crank
Hello just subscribed
You might benefit from a vacuum fuel pump
Gives that extra juice
Hmm... idk
Chain tensioner is very dangerous to use on these bills. I had bad experience already six times already I stopped using chain containers, and I never had that problem ever again.
I got half links that I can use to make the chain shorter, adjust the wheel forward or back etc. Yeah I don't like using chain tensioners, but at least those spring loaded ones with sprocket is better than the stock ones, if you keep it tighter.
High speed the chain tends to wobble a little bit too much and it might pop off the rail from the chain tensioner. That’s what happened to me or wrapped around the chain and I was doing about 40 miles an hour and I literally went for a whole ride lol not fun
SUPER 😄👌👌👌👌👌👌👌👌👌👌👌👌👍👍👍👍👍👍👍👍👍👍👍👍👍
disc break link
220mm scooter smolik on google
Aluminum jog cylinders will do you better or if not an aluminum Marelli little pricey though don’t go buy them half-price ones though by the full price ones $250 up worth the money worth every penny especially a nine port euro cylinder
I plan to get those athenas, either if I can afford it or when I blow my cylinder lol. replacement kit is $150 on amazon tho.
Sorry for all the stupid people asking about your voice bro.screw them .I think your voice is better than most depth people but don't bother with the stupid fools that don't know. Stay safe and keep having fun with your builds.
Eh i dont mind it too much lol just wanted everyone to know, but thanks
Get rid of that Rag Joint ASAP at that speed.
500+ miles never had problems with it. Just don't install it incorrectly or use bad wheels or anything. I'm now using a felt faker bike, finally.
@@trentbikes Spoke stress cant afford to crash on pavement.Rear rim controts to S shape folds in itself . Its happen to me. You dont ever want that. Minarellipower world increase stress levels
@@trentbikes Point taken watch it carefully.
Shave ur woodruff key down on ur magnet where it fits in the magnet, not the crank. Make it so you can rotate the magnet counterclockwise to retard ignition a few degrees. You’ll lose a bit of heat and also pick up some rpm
yeah im aware, i need to though. on my yd100 i simply removed the key and retarded it more, i also tightened the nut a little more than usual, like 100inlbs. never had issues, never shifted
@@trentbikes sometimes the taper on the crank will hold the magnet in place, but not always. Worse case, doing it with no key, it shifts and the engine dies. No biggie!
@@jamiebouchard9862 yeah, gotta bring tools and adjust it back! lmao. thanks for the post on facebook tho
Bro we need an update!
wdym?
what disk brakes are those?
It's just rim brakes. I built a better bicycle though, video on channel.
@@trentbikes do you know the diameter of the holes for the mount to the bike? the website doesnt specify and im not sure if they will fit my rims.
I can not realize one thing:
*You bought a Minarelly motor 6HP which means it can go 45-50MPH from stock.*
Why did not you first tried it out ?? Why did you start do porting and rebuilding it just immediately after purchasing? But you achieved the same result which was promised from stock! the same 6HP and 45-50mph! ???
bro how the spokes didn't broke?
I have no idea. Probably because I don't install the rag joint incorrectly.
aa okey I have bigger spocket should I tight or loose the screws of spocket?which is best for spokes?@@trentbikes
@@trapbass7690 they are supposed to be tight... but not way too tight or you'll just strip them
I subd. IL share My new build soon
appreciate it
Did bro taste grease? 🔥 4:00 then a chain 🔥 5:59
oil and fuel mix lol
but I saw a video of you talking to another person and listening to him. How can you listen if you're deaf?
cochlear implant
im deaf too so i also talk very monotone
27:56 - at the End, you covered your last writing
Be careful
The best rims are those solid magnesium without spokes because your motor is always pulling on those spoke which messes up the rims
No. Those are made from chinessium.
I don't hear anything wrong with your voice , sounds like good English to me .v
WTF is this 😂😂😂 hell you're talking shit about my old tomos if we we're close and I still had it I'd gladly race you. Beware my Tomos was pushing between 20-30hp.
Btw guys, this is the guy who cried about hobbyists building motorized bikes for fun, on someone's video. He doesn't know what hobbies are.
Holy Zeus! UA-cam censors damn near everything I type these days. Apparently I can’t type [p]-Nis because some people have small ones and they’re pretty mad about that. So I can’t say that some people treat others poorly because they’re upset about having a very small [p]-Nis, or maybe just a little bit too small - like just big enough to look like a normal one, but still small enough that women giggle when they see it and say “aww that’s cute”.
So I can’t type that they said, because that’s mean. Unlike someone mocking your voice box - which is another part of the human body, just like a [p]-Nis - but we can’t say that because talking about that body part is mean. Makes sense if you don’t think about it.
So I’ve made a list of body parts that are acceptable to ridicule on UA-cam
1) hair
2) facial features
3) voice box
4) various internal organs, excluding prostrate
5) hands/feet
6) epidermis
It should be noted that if the subject is not white, no ridicule of any observable feature is acceptable
That should help us all wade through the quagmire of language traps. Ok see ya. Good show with the bike, bro.
Pls, do a favor for yourself. Change your fork, you will be safe running over 30mph
Yeah, I really need to. Currently looking for some that's 1 inch threaded. I do have my sister's old frame with the suspension fork, that's 1 inch threaded, but idk if it's long enough to fit.
@@trentbikes try to get some good fork with suspension, its posible to insert motorbike fork to a bike, but some few adaptations. If you step on a broke street, you simple fork will be hit and vibrations fork can break running and you'll probably get a bad experience. Dont get me wrong
@@trentbikes after all, you have a very beautiful and strong engine! :)
@@MaRc079100 not doubting you. this is why I avoid/swerve around those little "potholes" (drains/sewers things) that you can see in the video. the roads i ride on arent so bad, if theres some big bumps then i'll obviously stand up to mostly absorb that
@@MaRc079100 thanks man
Shouldn't even reply to anyone that hasn't been out enough to meet a deaf person, there's been deaf individuals since I was a kid in grade school and that's growing up in a small town.
No torque on 2 strokes js
ok?
No speed on a 4 stroke js
if there was no torque on 2 strokes, then i wouldn't be moving at all or even gone up to 50mph.... so you're dumb js
I mean not like 2 strokes get paired with 4ts of higher displacement for no reason
Sorry but going fast will kill you
Spot on! @chadstewart6005
Didn't know you was deaf but I never judge a book by its cover