Damn. That green HPA gearbox is the most beautiful thing I've ever seen! Would've look even better in V.3 version. Dwell for nozzle feature is the nicest thing here.
Great video buuuut. The noob in me just understand what the definition to what the course dwell and fine dwell does exactly on the MKll. Please help. Google doesn't even know.
+Matdx EOD . The dC and dF are additive to each other. dC+dF= overall dwell The overall dwell is the amount of time the solenoid is charged with electricity which not only cycles the nozzle forward but releases the air required to propel the BB. Hopefully that clears that up.
Hey amped airsoft if you could answer this that would be good but my cz scorpion hpa only shoots to the right side I tried adjusting the hop up and didn’t work what do you think it is?
So I have a Jack and I'm having double feeding issues. I'm assuming that its letting the nozzle move back for too long causing the double feed? So I need to make the dp lower? It's set at the stock 50 right now...
Anth, anyway to know if my FCU (Basic) on Wolverine Inferno is Bricked? When i put the battery in while holding down the trigger there is a small LED that flashes yellow twice.
The FCU stores it's data, so no worries about that. As far as the renostats, I'm not sure exactly, but I would imagine that Wolverine made it so that the FCU works as intended. ;) Perhaps the renostats move in certain increments away from what is already set on the app. I'm not 100% but that would make sense. -Kurtis
Hello Amped Airosoft im buying a the HPA kit with the Bluetooth FCU for 581 can i rear wire it off the bat or do i have to buy something to make it rear wired? Cause i see the Premium can be rear wired and the bluetooth one is a premium aswell does it also have the long green cored i can use to rear wire it?
I have a another setting right after SL that you didn't show. Mine shows I O 0 and I can change it to I O 1 by moving the stick up or down. What does this setting do?
This is the main one about the FCU, which is a little out dated on some settings. For tuning purposes, the dN and dP are going to be your two main settings to tune. dP Controls the amount of air going down the barrel (Poppet Dwell). dN controls how long your nozzle is held back for feeding. dN will allow you to adjust your nozzle to hold open longer for better feeding on not so good magazines. You will want dP as low as you can go while working reliably. This is where you are able to get more efficiency out of your build. We may do a setting video in the near future to give everyone a helping hand!
Hey Amped, I was one of the early adopters of the mk2 and I am confused with the ufcu. So, I put the mk2 in an Elite Force KMP Basic (don't know if that has anything to do with the problem) and I can't figure out how to make my gun shoot on semi when semi is selected or auto when auto is selected. The only way I can get my gun to shoot semi is if i put the sL setting in reverse. So my question is how can I make the mk2 shoot on semi when semi is selected and auto when auto is selected?
Hey, can someone (or the people from amped) tell me the default setting for IS, the antistiction setting? Also, any idea as to where I can find all the defaults for the fcu, so I can go from there?
Hi ya! Hmmm I do believe it is 00. If you ever need to find out the defaults, you can reset your FCU at any time. In order to do this, simply hold down the joystick while you plug the battery in. Just remember if you are using a Jack or F1 to make sure that you set your FCU FC setting to F1. Hope this helps! Thanks! Kurtis
Hi there! How old is your Jack? There is a good chance it's under warranty. This is probably simply an O-Ring issue where your Jack needs cleaned or an oring replaced. If you can, please shoot us an email at sales@ampedairsoft.com with your info and order #. We can then help you out and get you in touch with polarstar to get you all set! We will stand by to hear from you. Thanks! Kurtis
I was messing around with my fcu and I had it set to semi and full auto set at 25 rps and I fiddled around with the fcu and now it shoots full auto and full auto and I’ve got no idea how to set it to semi and full auto
Crankz hi there! You will want to set s01 as 01 and s02 as 00. I would recommend reading up on your FCU manual if you need further reference. If you don’t have it, please shoot us an email at sales@ampedairsoft.com and we can shoot one over for you. -Kurtis
I have a question about I have wolverine v2 spartan edition, it is possible to plug the premium FCU to my spartan edition without changing the trigger or I need to buy trigger board and the wires ?
Negative. You will need to purchase the FCU, V2 Trigger Board, and Wire Harness. The Spartan edition board is an all in one solution and does not work with the other parts. Hope this helps!
This really depends, both have their pros and cons. It mainly comes down to personal preference. PolarStar has been around since the beginning, Wolverine started a couple years ago. Wolverine has been coming out with many new innovations on the market (CO2 Wraith Stocks, New HPA Systems, Bluetooth FCUs, recoil stocks, etc). PolarStar tends to roll out new things slower, but have some new things on the horizon as well. If you are looking for simplicity, Wolverine has that down since you do not have to do much tuning. PolarStar has the ability to program settings using a screen on the FCU. Some players like this better, but there are more settings you can fine tune to your liking. Both brands perform very well and both have great warranty services. If you watch the above guide, it will show you all of the FCUs for each unit, which will give you an idea on what to expect. We highly recommend researching and seeing which systems pop out at you. There is never a 100% best when it comes to Airsoft. Hope this helps! Thanks, Kurtis
Thanks! 8) Best of luck in your research! If you ever have a questions, please feel free to shoot us an email at sales@ampedairsoft.com and we will help you along your way! Have a great weekend! Thanks! Kurtis
That's a really good question. 8) When it comes to settings, there is really no straight answer. You will need to take your rifle and take time to tune it accordingly to reach the RPS and performance you would like. Typically the first thing to do is to tune your ROF setting. Then once you get that to where you can, move on to your feeding (dN). Adjust it as low as you can while maintaining proper feeding. If you need to go further, then you can begin reducing other settings. Essentially the lower you can make your settings, the faster your able to fire since each setting represents additional time for each step of the cycle. Sounds sorta involved, but it's actually easy once you get the hang of it. You will just need to have reliable feeding magazines. Hope this helps! Thanks! Kurtis
The JACK utilizes the F1 setting on the FCU. The FE setting is for the fusion engine which is run by dual solenoids. Please attempt to reset your FCU by holding the Joystick down and plugging your battery in. Hold for a few seconds and release. This resets your FCU to factory setting. Make sure that it is set for F1 and see if that helps.
F.Y.I. keys are used for locks and wrenches and screw drivers are used for screws and bolts. No such thing as an allen key, allen wrench yes. I'm a machinist and no one calls them allen keys. Just saying. Thanks Pete.
You can with the following adapter: ampedairsoft.com/amped-custom-jst-battery-side-to-mini-male-tamiya-adapter/ Typically the 9.6v is over kill and takes up a ton of space. We typically recommend the following batteries as they fit anywhere: ampedairsoft.com/amped-custom-7-4v-250mah-mini-lipo-battery-with-jst-connector/ Please let us know if you have any questions. Thanks! Kurtis
May be a thing! Till then, please check out the following link for the FCU instruction manual. This should help out tremendously. 8) www.polarstarairsoft.com/downloads/manuals/FCU-Instructions%20RE3%20-%2002152017.pdf
Dwell is how long the nozzle is held back per shot. DP is how much air comes out per shot. So increasing your dwell will also increase the actual volume of air coming out per shot
Here you go! www.protechairsoft.com/mk2data/product_info.pdf Essentially just hold down the joystick when you plug the battery in and that will reset your FCU. -Kurtis
Blake, The only time it will do this is if your tank is not screwed all the way in, or if your knob on your UFA is down too tight for your tank. If it's down too far, your tank valve may be blocked by the UFA pin, which causing the air to not be able to flow. To avoid this, turn your UFA cap down all the way and then back it off by 1- 1.5 full turns. If this does not fix your issue, please shoot us an email!
Hi there! When it comes to settings, dn affects your feeding and isn't really tied to your barrel length. You will want to set dN so that your gun feeds consistently and reliably. dP is where you will need to do some adjusting. For the most part, you will not require much dP since you have such a short barrel. You will want to adjust the dP while watching your flight path and see which you prefer. Another method is to use a chronograph and decrease dP until you notice a drop in FPS. Then increase slightly till you see it go back up. This is where you will want to set it if you use that method. The rest is personal preference. Hope this helps!
thanks just got an F2 cant wait to play
Damn. That green HPA gearbox is the most beautiful thing I've ever seen! Would've look even better in V.3 version. Dwell for nozzle feature is the nicest thing here.
It’s called a fusion engine
pls do 2020 updated vid (btw love your guys’ regulator!)
19:10 Fusion Engine
Thx bud
2020 thank you
Yes please make another updated videos
Request: "Pleb to Pro - How to Joules"
Appreciate and respect the honesty. Thank you.
just ordered an f2 kit form u guys cant wait
Towards the end of 2020
Thank you!!
Thanks kurtis for redirecting me here!
It's Allen keys in the UK and has been for years and I was a machinist too.
Maybe it's different geographically, either way same thing :-)
Great video buuuut. The noob in me just understand what the definition to what the course dwell and fine dwell does exactly on the MKll. Please help. Google doesn't even know.
+Matdx EOD . The dC and dF are additive to each other. dC+dF= overall dwell
The overall dwell is the amount of time the solenoid is charged with electricity which not only cycles the nozzle forward but releases the air required to propel the BB.
Hopefully that clears that up.
+Protech Airsoft thanks Protech Airsoft
So dwell basically adjusts the FPS?
Hey amped airsoft if you could answer this that would be good but my cz scorpion hpa only shoots to the right side I tried adjusting the hop up and didn’t work what do you think it is?
im pretty sure dwell goes down with the spartan edition not up. may want to annotate that on the vid
Did you mean rheostat/potentiometer (instead of renostat); which is a variable resistor?
So I have a Jack and I'm having double feeding issues. I'm assuming that its letting the nozzle move back for too long causing the double feed? So I need to make the dp lower? It's set at the stock 50 right now...
Can you show a close up to the FCU
What about the redline n7
I think you mean to say rheostat not renostat. Although if you mis-spell rheostat like rehostat, it kind of looks like renostat.....
I have the wolverine classic fcu mines in 2 round burst for some reason
Anth, anyway to know if my FCU (Basic) on Wolverine Inferno is Bricked? When i put the battery in while holding down the trigger there is a small LED that flashes yellow twice.
Can we get an updated vid please?
So longer barrel more volume = more dwell time?
I have the old FCU for my jack so that means I'm out of luck till I get the right FCU?
my question for the wolverine Bluetooth fcu, does it have a memory or everytime you unplug your battery are you gonna have to adjust everything again
I just don't get how if the renostats are in a certain position how the app knows that and knows that's not how you want it to be adjusted
The FCU stores it's data, so no worries about that. As far as the renostats, I'm not sure exactly, but I would imagine that Wolverine made it so that the FCU works as intended. ;) Perhaps the renostats move in certain increments away from what is already set on the app. I'm not 100% but that would make sense. -Kurtis
7:38 for polarstar guns
Hello Amped Airosoft im buying a the HPA kit with the Bluetooth FCU for 581
can i rear wire it off the bat or do i have to buy something to make it rear wired?
Cause i see the Premium can be rear wired and the bluetooth one is a premium aswell does it also have the long green
cored i can use to rear wire it?
soo is the older fcu video for the polestar outdated? last video had "re20"
Nice video!
+Spade It came out 5 minutes ago and is 37 minutes long XD
+Simon Depew haha so true
+Simon Depew that doesn't mean I can't compliment my favorite channel in a good video
Didn't say you couldn't, but it is like saying good game before the game starts.
5 year old video and still relevant
but you can't get a saw FCU with a version 2 kit for us poor G&P M249 guys!!?
I have a another setting right after SL that you didn't show. Mine shows I O 0 and I can change it to I O 1 by moving the stick up or down. What does this setting do?
Hi there, Which FCU are you referring to?
Thanks,
Kurtis
Is there a in depth video about the f2 and setting up the settings
This is the main one about the FCU, which is a little out dated on some settings. For tuning purposes, the dN and dP are going to be your two main settings to tune. dP Controls the amount of air going down the barrel (Poppet Dwell). dN controls how long your nozzle is held back for feeding. dN will allow you to adjust your nozzle to hold open longer for better feeding on not so good magazines. You will want dP as low as you can go while working reliably. This is where you are able to get more efficiency out of your build.
We may do a setting video in the near future to give everyone a helping hand!
@@AmpedAirsoft awesome I've never really understood the settings, 👍 now I do, thanks
@@megmcmuffinz No problem! Glad we could help!
why is their no db on the polarstar fcu
I have a RE20 board and I don't see the FE/F1 setting. Has this setting been removed?
To our knowledge they haven't removed it and it is present on all FCUs they send out. There is a chance that yours is an older revision.
Hey Amped, I was one of the early adopters of the mk2 and I am confused with the ufcu. So, I put the mk2 in an Elite Force KMP Basic (don't know if that has anything to do with the problem) and I can't figure out how to make my gun shoot on semi when semi is selected or auto when auto is selected. The only way I can get my gun to shoot semi is if i put the sL setting in reverse. So my question is how can I make the mk2 shoot on semi when semi is selected and auto when auto is selected?
ok cool thanks
Can I set a f2 to shoot semi only even if my selector switch is a full auto?
Yes
anywho can you use any lipo charger with these small 7.4v batteries?
Yes
ty sir
They picked android because they know what phone is going to be more durable to pull out of your pocket in the midst of battle and take a bb hit lol.
Lmao true
Should’ve made it for a Nokia phone then
Hey, can someone (or the people from amped) tell me the default setting for IS, the antistiction setting? Also, any idea as to where I can find all the defaults for the fcu, so I can go from there?
Hi ya! Hmmm I do believe it is 00. If you ever need to find out the defaults, you can reset your FCU at any time. In order to do this, simply hold down the joystick while you plug the battery in. Just remember if you are using a Jack or F1 to make sure that you set your FCU FC setting to F1.
Hope this helps! Thanks!
Kurtis
My jack has a leak at the top, there is the 2 holes in the top and air is coming out of the bigger one can someone help me?
Hi there! How old is your Jack? There is a good chance it's under warranty. This is probably simply an O-Ring issue where your Jack needs cleaned or an oring replaced. If you can, please shoot us an email at sales@ampedairsoft.com with your info and order #. We can then help you out and get you in touch with polarstar to get you all set!
We will stand by to hear from you.
Thanks!
Kurtis
plzz put a mark 2 in a mp5 im going to just need a kittle help
Does the reaper have adjustable rate of fire
Late but yes it does if it is not electromechanical vers.
I was messing around with my fcu and I had it set to semi and full auto set at 25 rps and I fiddled around with the fcu and now it shoots full auto and full auto and I’ve got no idea how to set it to semi and full auto
Crankz hi there! You will want to set s01 as 01 and s02 as 00. I would recommend reading up on your FCU manual if you need further reference. If you don’t have it, please shoot us an email at sales@ampedairsoft.com and we can shoot one over for you. -Kurtis
I have a polarstar jack and I want to shoot laser beams with my gun but my mags are feeding that good what dP should I use. Btw I'm using 27 rps
I mean they aren't feeding well/good
Get new mags
SUMMER 2021 yeet!
HARE KRISHNA!
sorry to ask, Android, that include windows? (I have a Samsung Note4)... just making sure i am doing things right.
note 4's are android. The nokia lumia line is windows
i have a f2
I have a question about I have wolverine v2 spartan edition, it is possible to plug the premium FCU to my spartan edition without changing the trigger or I need to buy trigger board and the wires ?
Negative. You will need to purchase the FCU, V2 Trigger Board, and Wire Harness. The Spartan edition board is an all in one solution and does not work with the other parts. Hope this helps!
@@AmpedAirsoft thanks, I will buy it in a few months maybe, for the moment works fine
@@3ricVideoGames Sounds good!
Polarstar vs wolverine, whats the best and why.. cant really find things like this.
This really depends, both have their pros and cons. It mainly comes down to personal preference. PolarStar has been around since the beginning, Wolverine started a couple years ago. Wolverine has been coming out with many new innovations on the market (CO2 Wraith Stocks, New HPA Systems, Bluetooth FCUs, recoil stocks, etc). PolarStar tends to roll out new things slower, but have some new things on the horizon as well.
If you are looking for simplicity, Wolverine has that down since you do not have to do much tuning. PolarStar has the ability to program settings using a screen on the FCU. Some players like this better, but there are more settings you can fine tune to your liking.
Both brands perform very well and both have great warranty services. If you watch the above guide, it will show you all of the FCUs for each unit, which will give you an idea on what to expect.
We highly recommend researching and seeing which systems pop out at you.
There is never a 100% best when it comes to Airsoft.
Hope this helps!
Thanks,
Kurtis
This is a verry good answer, thanks a lot! Its a verry big investment so ofc. Ill do my work in forehand, thanks again!
Thanks! 8) Best of luck in your research! If you ever have a questions, please feel free to shoot us an email at sales@ampedairsoft.com and we will help you along your way!
Have a great weekend!
Thanks!
Kurtis
I miss Anthony.
I can get mine rf to feed it rf 90 dp 2 dn 8 dr 1 lb 2
What if mine Dosent have the lb setting for the lipo?
ye mine doesnt have it either
What settings would efficiently do 40-45 RPS with a 6.03 300mm inner barrel. Amped Purple V2Gen3 FE?
That's a really good question. 8) When it comes to settings, there is really no straight answer. You will need to take your rifle and take time to tune it accordingly to reach the RPS and performance you would like. Typically the first thing to do is to tune your ROF setting. Then once you get that to where you can, move on to your feeding (dN). Adjust it as low as you can while maintaining proper feeding. If you need to go further, then you can begin reducing other settings. Essentially the lower you can make your settings, the faster your able to fire since each setting represents additional time for each step of the cycle.
Sounds sorta involved, but it's actually easy once you get the hang of it. You will just need to have reliable feeding magazines.
Hope this helps!
Thanks!
Kurtis
Wow, that was very helpful. Thank you so much Kurtis.
ReMoRsEllWatson no problem! Best of luck and have a great night!
What is the most efficient HPA engine on the market?
Prptech
Fusion engine I think
Fusion engine with the right mods
my jack fcu came on f1 but only works when i put it in the fusion one.
The JACK utilizes the F1 setting on the FCU. The FE setting is for the fusion engine which is run by dual solenoids.
Please attempt to reset your FCU by holding the Joystick down and plugging your battery in. Hold for a few seconds and release. This resets your FCU to factory setting. Make sure that it is set for F1 and see if that helps.
Thanks
F.Y.I. keys are used for locks and wrenches and screw drivers are used for screws and bolts. No such thing as an allen key, allen wrench yes. I'm a machinist and no one calls them allen keys. Just saying. Thanks Pete.
Team Badger Airsoft hex key*
Can I use a 9.6 v battery on my polarstar fusion engine
You can with the following adapter: ampedairsoft.com/amped-custom-jst-battery-side-to-mini-male-tamiya-adapter/
Typically the 9.6v is over kill and takes up a ton of space. We typically recommend the following batteries as they fit anywhere:
ampedairsoft.com/amped-custom-7-4v-250mah-mini-lipo-battery-with-jst-connector/
Please let us know if you have any questions.
Thanks!
Kurtis
Pleb to pro New p* FCU Please I just got my jack and need some help with it❤️
May be a thing! Till then, please check out the following link for the FCU instruction manual. This should help out tremendously. 8)
www.polarstarairsoft.com/downloads/manuals/FCU-Instructions%20RE3%20-%2002152017.pdf
3:30 what’s dp?
Dwell is how long the nozzle is held back per shot. DP is how much air comes out per shot. So increasing your dwell will also increase the actual volume of air coming out per shot
How do you factory reset the protech fcu?
Here you go!
www.protechairsoft.com/mk2data/product_info.pdf
Essentially just hold down the joystick when you plug the battery in and that will reset your FCU. -Kurtis
Thank you
Amped Airsoft also, are there any problems you know of regarding the psi dropping to 0 whenever you shoot on an slp rig?
Blake, The only time it will do this is if your tank is not screwed all the way in, or if your knob on your UFA is down too tight for your tank. If it's down too far, your tank valve may be blocked by the UFA pin, which causing the air to not be able to flow. To avoid this, turn your UFA cap down all the way and then back it off by 1- 1.5 full turns.
If this does not fix your issue, please shoot us an email!
Amped Airsoft thank you very much, i will try it right away
me watching this when my only hpa engine is Kythera
Good high rps setting for jack???
50
+ELMNT MOON JONES that's not what he meant lmao, low nozzle dwell btw
+ELMNT MOON JONES rip
+AkbarAirsoft 35 feeds good for most mags
1. dmr style ;p
So I have an f2, I don’t know what dp or dn settings I should have. I have 155mm inner barrel. I just can’t get them right. Plz help
Hi there! When it comes to settings, dn affects your feeding and isn't really tied to your barrel length. You will want to set dN so that your gun feeds consistently and reliably.
dP is where you will need to do some adjusting. For the most part, you will not require much dP since you have such a short barrel. You will want to adjust the dP while watching your flight path and see which you prefer. Another method is to use a chronograph and decrease dP until you notice a drop in FPS. Then increase slightly till you see it go back up. This is where you will want to set it if you use that method. The rest is personal preference. Hope this helps!
Amped Airsoft thank you so much
i have a completely different fcu than yours
q
All that talking and I have absolutely no clue what he was talking about because I can’t see anything
Having Trouble Finding the Protech UFCU Manual... Any Help?