My nozzle isn't pushing out my bbs on my jack. When I don't have my barrel and hop up connected it fires fine but when I connect hop up and barrel no bbs are released. Can you help me
its just gonna be depending on your rof, so if u run a low rof you wont need the best mags but if you want your mags to feed at like 50-60 rps you need better mags like pts epms.
Hi could you help me regarding my f1 polarstar threre is air coming out in the noze but the nozzle wont move back and forth as should it be can you pls help me what to do, and no leak at all thank you
I've notice my JACK engine consumes more air than my F2 and my F2 barrel is like 5 times the length of my JACK gun... is the JACK engine known to be less air efficient than the F2 or should I play with the setting ?
Very informative! A friendly bit of criticism; write down what you want to say before recording or do a voice over. It'll sound professional :) Hope this hasn't offended you or anyone else :)
Hey mate im doing another hpa set-up with a jack this time instead of a f2 i used a nipple off a fb3.0 nozzle and one of those red alloy t-pieces like he is using in the video in that ,should i do the same again for the jack build i have a few of the gbu alloy t-pieces that are a direct copy of the red outdoor t-pieces and other fb nozzles and ldt nozzles that i can pull a nipple off or should i just order a few of the ceh printed nipples they are cheap enough plus they have oring rebuild kit's and the techt gun sav grease
I just switched to polarstar and I didn’t know how to program this and your video helped a lot. Thanks again.
I had the opposite reaction from this video. Horrible
Cheers for some info on hpa ,seems like when it comes to tuning the things all the tech's treat it like it's some big secrete 👍
For my F2 how to I make the selector switch toggle between semi and auto? I thought I just had to make S1 =1 and S2 = 0
My nozzle isn't pushing out my bbs on my jack. When I don't have my barrel and hop up connected it fires fine but when I connect hop up and barrel no bbs are released. Can you help me
This is why people now write down scripts before filming.
How do you know how to match a magazine properly?
Supposedly slr mags are the b
Best sorry
Guess, start low and wind up until feed suffer
its just gonna be depending on your rof, so if u run a low rof you wont need the best mags but if you want your mags to feed at like 50-60 rps you need better mags like pts epms.
How would I get my safety working with this
Hi could you help me regarding my f1 polarstar threre is air coming out in the noze but the nozzle wont move back and forth as should it be can you pls help me what to do, and no leak at all thank you
I've notice my JACK engine consumes more air than my F2 and my F2 barrel is like 5 times the length of my JACK gun... is the JACK engine known to be less air efficient than the F2 or should I play with the setting ?
jack is definitely less air efficient than f2 if the f2 is properly tuned. also barrel length / airseal would effect this.
Nice...
Very informative! A friendly bit of criticism; write down what you want to say before recording or do a voice over. It'll sound professional :) Hope this hasn't offended you or anyone else :)
👍👍..Nice..👍👍
👍👍👍👍👍 fullll
Hey mate im doing another hpa set-up with a jack this time instead of a f2 i used a nipple off a fb3.0 nozzle and one of those red alloy t-pieces like he is using in the video in that ,should i do the same again for the jack build i have a few of the gbu alloy t-pieces that are a direct copy of the red outdoor t-pieces and other fb nozzles and ldt nozzles that i can pull a nipple off or should i just order a few of the ceh printed nipples they are cheap enough plus they have oring rebuild kit's and the techt gun sav grease
how do u change the fps i play indoor limit is only 350
play around your PSI on your regulator.
Jesus loves you all and he died for our sins! Turn to him today, he’s done so much for me! 😊