Will ROF or rF wear down the gun faster if you don’t have the settings correct? Or will it wear it down faster no matter the settings except the rF being higher?
i recently bought my polar star jack and when i shoot semi it shoots 1 bb at a time but without doing anything it goes it to 4 round burst which is a my auto setting
my p* jams a lot. and I got a different hop up and bucking but it still jams and I have a v3 p* and the tech said try changing your settings on the fcu. what should I change in the fcu??
Can you power the FCU with an nihm battery? (It's just that I was thinking of getting a polarstar but have never used lipo batteries before and I don't really want to get a lipo charger, plus I know nothing about how to use lipo's.)
Lipos work the exact same as a nihm battery except it has an extra cable for charging and the normal connector cable. Way more positives too like faster rof, longer battery life and faster charging. Plus a lot more I highly suggest using a lipo. If you’re gonna invest in a polar star you might as well invest in a lipo
how is 000d (in hex) = 0 (in decimal)? d (hex) = 13 (base 10) d (hex) = 1101 (4 bit, base 2) even if it had some sort of prefix (0x...) 0x000(hex) = 0000(hex) = 0000(base 2) = 0 (base 10)
thank you for this video! :) So if i purchase a fusion engine for my AEG, what else do i need to get it running? I already have tank, reg, and line. Would a 7.4 1000MaH lipo be fine also?
No problem! If you already have your tank, reg, and line, then all you need is a JST wired Battery. We recommend the 7.4v Mini Lipos shown here: ampedairsoft.com/zippy-7-4v-350mah-2s-20c-mini-lipo/ However, the 7.4v 1000mah will work too as long as it's JST wired. If you do not have JST connector on your battery, we do have the following adapter that will also work for you: ampedairsoft.com/amped-custom-jst-battery-side-to-mini-male-tamiya-adapter/ If you have any other questions, please feel free to shoot us an email at sales@ampedairsoft.com. Thanks!
caleb wheeler sure can with the newer gen FCUs. It is your S1 and S2 setting. Please check out the latest FCU walk through on this channel. Hope this helps!
So with my old fcu that I bought from someone I was able to shoot semi auto with no delay in between shots but with my new fcu the semi auto seems to have a limit of shots in between each other basically a limited rps?i put it as low as possible on it and I have a speedtrigger and it’s still limiting my shots...Any Help?
Set your Sr setting to 0. This removes the wait time between semi shots. Copied from the manual for your reference: "Max Semi Auto ROF (Sr) - This setting controls the maximum semi auto rate of fire. Once a shot has been fired the FCU will ignore additional trigger pulls until the time in the Sr setting has elapsed. This is adjustable in 0.1ms increments from 10 shots per second (Sr 01) to as low as 1 shot every 9.9 seconds (Sr 99). Setting this to 0 turns off the timer and allows you to fire as fast as you can pull the trigger."
There truly is not a "best" setting as they are gun, setup, and preference dependent. The main setting to keep in mind is dP. This affects your dwell time. If it's too high, you use more air than you need. If it's too low, it may not function correctly. Tuning this is one of the most important things to keep efficiency high.
Amped Airsoft thank you. Do you have any fcu advice with set ups with longer inner-barrels? Id like to make my dmr build as effective and efficient as possible.
@@noelbnetz No problem! Yup, make your DP as low as you possibly can without sacrificing FPS or performance. It is best to do this with a chronograph. You will be able to see when your fps starts to dip as you adjust your dP downwards. Once it starts to dip, you know where you will want to stay. Go up in dP one or two and you will be set. Only fine adjustments after that point.
This is heavily setup dependent but we recommend setting your dP as low as you are able to. Please take time to tune your dP to your liking by moving your dP up and down one by one while watching your long range shots. Notice the flight path and adjust as you like. This is the way to do it so its customized to how it works best for your setup. With tuning there is no absolute way to do it. It's all setup dependent. :) Experiment and you will be rewarded with great results.
We really like the PTS EPM Magazines. If you ever find you need more power, the Maple Airsoft Springs are great! We just recently received a restock of both of these on our website. ampedairsoft.com/pts-enhanced-polymer-magazine-epm-black/ ampedairsoft.com/maple-airsoft-supply-superfeed-series-high-speed-replacement-magazine-springs-pack-of-3/ Hope this helps!
Robbie: Your FCU is much newer than this video. This video is over 3 years ago. The new settings are S1 and S2. Please refer to your instruction manual. Thanks!
All depends what FPS you would like. 120 PSI is typically the max operating pressure. Running at 120 PSi will not hurt it, although typically you will want to run lower so that you can get more shots out of your tank.
@@JohnTheMexicanic Yeah... they just updated their website so that link is no bueno anymore. 7 months too late haha. I hope they make a page for this information again. 8(
@@PvpPandaMC dp the air that the nozzle would pull if you put dp 5 to 6 dn at 12 dr, rf at 60 it shot me at 39 40 bbs per second but sometimes no air came out of nozlle I had to go up to more than 8 dp but no longer He shot in the car, the 025 balls opened more, I'm going to see if he left like a thread, with 030 balls putting 8 dp, a6 dn at 10 the dr is perfect
So polarstar says that this engine can achieve up to 30rps... you’re shooting nearly 50... did they just underestimate themselves? Or was it a suggestion to not go higher than 30?
Hi there! When it comes to settings, it will be rifle dependent. However, for the most part, you want to have your dP and dN setting as low as possible without compromising performance. This will cut down on the air usage. Couple that with running at a lower PSI and you are well on your way to saving air. If you want to have a super efficient Fusion Engine, we highly recommend looking into Low Flow Poppets, Poppet Shims, High Flow Nozzles (Purple Nozzle), low strength poppet/nozzle springs and S2 Lightning Banjos. Once you have these installed, the FE is easily one of the most efficient systems out there. Hope this helps! -Kurtis
@@ryan-bl9tb Cool. Those two are a good step in the right direction. Black nozzle will help a good bit, just not as much as a higher flow nozzle. Give it a try and see what you think! The poppet does a good deal on it's own.
8:41 What if u have no friends
You got a friend yet?
my jack polarstar engine is triple and double feeding every now and then and i want to know how to fix it
Will ROF or rF wear down the gun faster if you don’t have the settings correct? Or will it wear it down faster no matter the settings except the rF being higher?
Waiting for mine from you guys hopefully this week!
How do you adjust the FPS on a polarstar engine
with hpa you just adjust the pressure on the tank regulator that increases or decreases fps
no lie i still kinda need this 🌚 ive had my fusion for a LONG ASS TIME, but i only knew a bit, but its nice to have some little more help
i recently bought my polar star jack and when i shoot semi it shoots 1 bb at a time but without doing anything it goes it to 4 round burst which is a my auto setting
my p* jams a lot. and I got a different hop up and bucking but it still jams and I have a v3 p* and the tech said try changing your settings on the fcu. what should I change in the fcu??
Andrew McKinnis maybe your rps is too high ?
Is it the same with jack's FCU?
many thanks
This is the next best thing to slice bread
Thanks man this was very helpful and great vid👌🏼
How do you turn on the FCU? I plug on my buffer tube sized lipo (fully charged) and nothing appears on the lcd. Is the fcu broken? Or the lipo?
Jonathan G im 5 years late but for fusion engines it should automatically turn on. It it doesnt, a wire might be off or the fcu might just be broken
Can you power the FCU with an nihm battery? (It's just that I was thinking of getting a polarstar but have never used lipo batteries before and I don't really want to get a lipo charger, plus I know nothing about how to use lipo's.)
Lipos work the exact same as a nihm battery except it has an extra cable for charging and the normal connector cable. Way more positives too like faster rof, longer battery life and faster charging. Plus a lot more I highly suggest using a lipo. If you’re gonna invest in a polar star you might as well invest in a lipo
Hi! How i’m gonna do the factory reset of my tune? Thanks
how is 000d (in hex) = 0 (in decimal)?
d (hex) = 13 (base 10)
d (hex) = 1101 (4 bit, base 2)
even if it had some sort of prefix (0x...)
0x000(hex) = 0000(hex) = 0000(base 2) = 0 (base 10)
This the same for Gen 3 V2 Polarstar Fusion Engine? Mine is on the way
When im adjusting my dp nothing is happening to the fps, is this a problem ?
Thx for this video it helped me a lot
Thx so much this helped a bunch 10/10
Nice Video
Can you lock to semi using the engine.
What would cause ping sound when shooting.
Really need more clarification on how to figure out the shot count... totally confused. tried googleing calculators but still so damn confused.
Does rate of fire affect semi auto?
Once the FCU detects that the battery is low, will the fcu shut off? If so, does this render the gun inoperable? Can you fire the gun without the fcu?
You can't shoot without the fcu one that controls the whole engine
Thank you very helpful.
Your welcome! Thank you!
Very interesting video!! thx
Can u make me a fcu settings for dmr build and speedqb build? My engine is fusion with purple nozzle
thank you for this video! :) So if i purchase a fusion engine for my AEG, what else do i need to get it running? I already have tank, reg, and line. Would a 7.4 1000MaH lipo be fine also?
No problem! If you already have your tank, reg, and line, then all you need is a JST wired Battery. We recommend the 7.4v Mini Lipos shown here:
ampedairsoft.com/zippy-7-4v-350mah-2s-20c-mini-lipo/
However, the 7.4v 1000mah will work too as long as it's JST wired. If you do not have JST connector on your battery, we do have the following adapter that will also work for you:
ampedairsoft.com/amped-custom-jst-battery-side-to-mini-male-tamiya-adapter/
If you have any other questions, please feel free to shoot us an email at sales@ampedairsoft.com.
Thanks!
Do you have a ruff settings guide for 35rps ?
Nice and thanks
When are you guys getting the elite force and 1911 tac #amped
Can somebody help me. My single action does not work any help
are polarstars still reliable at high rof like that one at 48 rounds a second?
They are not really any less reliable, but performance concerning range and accuracy will suffer at high rate of fire.
Thanks!
-Robby
thank you so much for replying. im greatly considering picking up an airsoft polarstar player package from you guys, absolutely amazing prices
+Amped Airsoft If u have a really high ROF but u are using semi will it effect accuracy, range?
@@MIAirsoftMr I mean it's kinda what polarstar engines are for
is it at all possible to run a burst setting in place of your semi auto and leave full auto at full auto
caleb wheeler sure can with the newer gen FCUs. It is your S1 and S2 setting. Please check out the latest FCU walk through on this channel. Hope this helps!
My FCU is not working, and while it's not working, I can't use my gun, please help!!!!
Charge your battery?
thanks , very usefull video !
Glad you enjoyed it! Thanks!
So with my old fcu that I bought from someone I was able to shoot semi auto with no delay in between shots but with my new fcu the semi auto seems to have a limit of shots in between each other basically a limited rps?i put it as low as possible on it and I have a speedtrigger and it’s still limiting my shots...Any Help?
Set your Sr setting to 0. This removes the wait time between semi shots. Copied from the manual for your reference:
"Max Semi Auto ROF (Sr) - This setting controls the maximum semi auto rate of fire. Once a shot has been fired the FCU will
ignore additional trigger pulls until the time in the Sr setting has elapsed. This is adjustable in 0.1ms increments from 10 shots per second (Sr 01) to as low as 1 shot every 9.9 seconds (Sr 99). Setting this to 0 turns off the timer and allows you to fire as fast as you can pull the trigger."
Amped Airsoft thx
@@driftjust No problem!
Does the gun come with a jst to tamiya connector?
Nope, only $3 though
how do you semi lock it
Do you have any links to pages that explain what are the best fcu settings? Theres very little info on the internet that explains the best settings.
There truly is not a "best" setting as they are gun, setup, and preference dependent. The main setting to keep in mind is dP. This affects your dwell time. If it's too high, you use more air than you need. If it's too low, it may not function correctly. Tuning this is one of the most important things to keep efficiency high.
Amped Airsoft thank you. Do you have any fcu advice with set ups with longer inner-barrels? Id like to make my dmr build as effective and efficient as possible.
@@noelbnetz No problem! Yup, make your DP as low as you possibly can without sacrificing FPS or performance. It is best to do this with a chronograph. You will be able to see when your fps starts to dip as you adjust your dP downwards. Once it starts to dip, you know where you will want to stay. Go up in dP one or two and you will be set. Only fine adjustments after that point.
Hi, I got a 400mm, 6.23 orga barrel from amped. How many dp do you reccomend?
This is heavily setup dependent but we recommend setting your dP as low as you are able to. Please take time to tune your dP to your liking by moving your dP up and down one by one while watching your long range shots. Notice the flight path and adjust as you like. This is the way to do it so its customized to how it works best for your setup. With tuning there is no absolute way to do it. It's all setup dependent. :) Experiment and you will be rewarded with great results.
+Amped Airsoft Thanks a lot for the quick response :-). I take my time and find out the best setting. Greetings
from Switzerland
Why does he say “fuck it” at the end of the title ?
How do you adjust the nozzle?
What mags are you using
We use EPMs, Hexmags, Umarex Mags, K120s, and a slew of others.
Amped Airsoft do you know any good mags that feed high rps?
We really like the PTS EPM Magazines. If you ever find you need more power, the Maple Airsoft Springs are great! We just recently received a restock of both of these on our website.
ampedairsoft.com/pts-enhanced-polymer-magazine-epm-black/
ampedairsoft.com/maple-airsoft-supply-superfeed-series-high-speed-replacement-magazine-springs-pack-of-3/
Hope this helps!
mine says rE3.0 mine Dosent have the fafu setting 😐
Robbie: Your FCU is much newer than this video. This video is over 3 years ago. The new settings are S1 and S2. Please refer to your instruction manual.
Thanks!
THANK YOU
don't really stand close Bolt and open Bolt
Are you going to do a gen 3 fcu video
It's on our list. Got loooots to do, but yes.
Should I push it to 120 psi?
All depends what FPS you would like. 120 PSI is typically the max operating pressure. Running at 120 PSi will not hurt it, although typically you will want to run lower so that you can get more shots out of your tank.
How much air pressure on regulator
Most systems can go up to 120PSI.
How do you put the fcu to f1 instead of fusion engine
Here you go!
www.polarstarairsoft.com/downloads/manuals/FCU-Instructions%20RE3%20-%2002152017.pdf
Simply set FC to F1 instead of FE.
@@AmpedAirsoft page doesn't load at all.
@@JohnTheMexicanic Yeah... they just updated their website so that link is no bueno anymore. 7 months too late haha. I hope they make a page for this information again. 8(
I dont understand how the dp works. Can u explain?
I mean dn. Please help Amped Airsoft
@@PvpPandaMC dp the air that the nozzle would pull if you put dp 5 to 6 dn at 12 dr, rf at 60 it shot me at 39 40 bbs per second but sometimes no air came out of nozlle I had to go up to more than 8 dp but no longer He shot in the car, the 025 balls opened more, I'm going to see if he left like a thread, with 030 balls putting 8 dp, a6 dn at 10 the dr is perfect
He has put rf 01 so he only shoots in semi
Which settings should i play with and which should stay stock?
Main settings depending on system will be rF, dN and dP. The others can be for the most part left alone.
@@AmpedAirsoft thanks for a fast answer, u see, my gun gets only 266 fps with 120 psi and 0.28 g bullets. Trying to find out why
@@AmpedAirsoft fusion engine gen 3 is the system
@@kavkaz2005ify What length barrel and diameter do you have?
@@AmpedAirsoft about 34-35 cm, and diameter im not sure. Madbull black python tight bore v2
what mags do you use
Little late too this comment just by some time😂 but if you’re still into airsoft the best mags on the market are the “pts emp 1’s”
Is this the same for the F2 ?
yeah identical
only this vid is old
FCU nowadays is different has had revisions and updates
So polarstar says that this engine can achieve up to 30rps... you’re shooting nearly 50... did they just underestimate themselves? Or was it a suggestion to not go higher than 30?
Going too high can burn out the gun so the suggest amount is lower than it can actually go
Ive seen a polarstar running at 100rps
Holy hell... That's a high rof lol
T.A.F. Guns, Knives, and Freedom yeah, any mags cant feed so is useless tho.
@@veke05 lol yea ive seen them too probably not good for it tho
But cant you set your FPS?
+ZN gamer your FPS is set by your psi setting on your regulator. The FCU is used to fine tune the settings of your engine. -Kurtis
Why does mine say c
This video is from way back and the newer FCU are different. We have a newer PolarStar fcu on our channel if you would like to check it out.
@@AmpedAirsoft I came to find out my screen was damaged
is it possible To shoot 95 m/s
Yes, u change it on the regulator
@@veke05 I got it figured out back then xd. Thanks for replying anyways
its essentially a mosfet
I wish polar star was cheaper
You get what you pay for.
Try to find on used.
Rely late reply but the PolarStar jack is now an option
super late reply, i can confirm
I LOVE YOU, thanks you so much
Thhhaaankkkk yooou
Holy shit u responded💀I was not expecting that
Anybody have some settings that can be efficient
Hi there! When it comes to settings, it will be rifle dependent. However, for the most part, you want to have your dP and dN setting as low as possible without compromising performance. This will cut down on the air usage. Couple that with running at a lower PSI and you are well on your way to saving air. If you want to have a super efficient Fusion Engine, we highly recommend looking into Low Flow Poppets, Poppet Shims, High Flow Nozzles (Purple Nozzle), low strength poppet/nozzle springs and S2 Lightning Banjos. Once you have these installed, the FE is easily one of the most efficient systems out there. Hope this helps! -Kurtis
Amped Airsoft i ordered a low flow poppet red but I ordered a black nozzle
@@ryan-bl9tb Cool. Those two are a good step in the right direction. Black nozzle will help a good bit, just not as much as a higher flow nozzle. Give it a try and see what you think! The poppet does a good deal on it's own.
Ok thanks guys always good for a good fast response 👍
@@ryan-bl9tb No problemo! 8) Glad we could help! -Kurtis
I'm getting a Jack in my gun and getting it this Friday! Just really scared of having a grenade on my back.
As long as you don’t go over 120 psi you’ll be good
who els has a f2
Lol typo
Lol indeed... fixed.
Thanks!
-Robby
Np i messaged Kurtis about it on fb :p
me still confusedd af
Edit: Nvm
What mags are you using
No mags were used in this video to our knowledge? haha Although we recommend the PTS, KWA, Elite Force, and MAG brand magazines among others.