GE Microwave no power no display repair diy temperature thermostat microswitch
Вставка
- Опубліковано 25 сер 2024
- GE Profile Series 2.2 Cu. Ft. Countertop Microwave Oven - website info:
Model: PEB7226SFSS
www.geapplianc...
My microwave has this model number:
Model: PEB7226SF1SS
SORRY - "NO" or "normally open" means the circuit is "open". When the switch is depressed, the switch will close!
follow and proceed at your own risk
i used a soldering iron to solder on the female spade connectors
parts i used:
GE WB21X10148 Genuine OEM Thermostat for GE Microwaves
www.amazon.com...
Podoy SZM-V16-FA-63 Microwave Door Switch Compatible with LG GE Starion WB24X829 3B73362F PS3522738 SZM-V16-FD-63 AP2024337
www.amazon.com...
Twidec/270Pcs Assortment Kit Quick Splice Male and Female Wire Spade 2.8/4.8/6.3mm Connector Crimp Terminal Block with Insulating Sleeve for Electrical Wiring Car Audio Speaker
www.amazon.com...
CONCLUSION: replacing the temperature and thermostat and single microswitch FIXED my problem. YMMV.
This video does great job of diagnosing a bad microwave:
• Microwave Oven Trouble...
Exact same microwave. Exact same problem. Thanks for being so descriptive!
Glad it helped!
Thanks for the video! Switches on order, hope it fixes things for me, but I have high hopes! (one of my NC switches was being quite finiky when I was testing it with my multimeter.
You are welcome! Good luck!
Our goldstar multi wave went out 30 mins ago
So the grey switch you replaced and the switch behind it. Do you have a picture of that wired in. I did some trouble shooting and mixed up the wires. Two single blue wires, one single white wire and one red and grey wire. Could you confirm what wires go were? I can not for the life of me find how they are supposed to go.
Found pics of my repair for the microswitch wiring. Hope this helps.
drive.google.com/drive/folders/1-LqrXOMsbMCdkhwm7hWFzZBgY9dTf1Fd
Did you have to discharge the capacitor before replacing the thermal fuse?
I might have put a screwdriver between the terminals to discharge it...
Your model looks like my monogram..mine just stop working after 2 weeks… you think it’s the same problem?? I barely used it a dozen times…
Not sure. Take it apart and investigate! 🙂 Good luck!
How did you repair/replace the wire connectors that go to the thermostat?
I soldered on these connectors:
Twidec/270Pcs 2.8/4.8/6.3mm Quick Splice Male and Female Wire Spade Connector Crimp Terminal Block Assortment Kit with Insulating Sleeve for Electrical Wiring Car Audio Speaker www.amazon.com/dp/B07VSD3HDM/ref=cm_sw_r_awdo_navT_g_YY6DVFAN7Z2B6F45CGTT
@@wasabisohot you soldered the male on the thermal fuse, and the female onto the wires. Then connected them??
@@brody6634 I soldered female connectors onto the wires and then connected them to the thermal fuse
@@wasabisohot ooooo those were a perfect fit to the thermal fuse, gotcha.. nicely done... Is there a reason you cut it, instead of takking off the existing connections? Also, I'm dealing with microwave issue right now... It's not quite the same model as yours. Mines got a convection oven inside the microwave, and I'm seeing 4 thermal fuses, all different temp ratings, 2 of the 4 have no continuity... Have you ever seen 4 thermal fuse in a mic tho? That kind of threw me off.. is it because it doubles as a convection maybe? I got those 2 thermostats ordered now, hoping it fixes my micro. 🤞
@@brody6634my wires were burnt so I cut the wires enough to get past the burnt parts.
Good luck!
Come on bro...... you are giving me a Headache moving Camera like that...😌😱
Bruh, don't watch the video then, problem solved
@@wasabisohot Just Subscribed for your Video and info 👍
Do I hear Dragon Ball