Thanks for all this info. I have made a number of cabinets but it really helps to get your insight and tips on this, especially the undermount slides. One question: when making the shaker panels, why don't you use the router table with a set of shaker bits? It seems to me to be much easier than all the settings necessary to do it on the table saw.
You know what's weird? I'm building my shop in my basement. I just finished walls and flooring. I'm at the shop cabinet/wall bench/workbench stage. Cabinets are the first to begin. I've been thinking for a few weeks about my cabinets. The past 2 weeks, all my woodworking youtuber subs have been making cabinet videos. Effin Google, listening to my cabinet rants to my wife and then telling these guys to make cabinets. Lincoln Street, Bourbon Moth, Jason Bent, MWA... All cabinet videos this week.
I have cabinets i got from my parents old house. They are the lightest plywood ive ever felt and no fancy joinery. Plastic brackets hold all the the corners together. They held heavy stuff for years, now going in my garage, but they look nice.
I was going to give you crap about not hooking the bottom part of that woodpeckers corner clamp in the right orientation but then I realized you did it on purpose because otherwise it wouldn’t have fit on the table. You’re smarter than I look…lol.
OUTSTANDING VIDEO! Easy to follow along and very thorough. I will definitely be refering back to your video. Very helpful and Thank you for reposting this entire video!
Jason, I found your cabinet instructions very helpful. I appreciate your finishing instructions too. One thing that would be great is hearing your thoughts on finishes to showcase the wood in addition to painting. I've been planning white oak face frames/doors but there just isn't much info on good finishes for these, especially if you want to add some color. Thanks!
I see what you did there... you get views on each original series episode, then eventually circle back and get fresh views on the complete series put together into a single video. Brilliant! Oh, and thanks for making this complete version, as now I don't have to go looking for all the others.
Can you please make a video showing the difference between using these drawer slides vs. the much less expensive versions that appear to do the same job as these do??
I’d like to see a close up of the clamp rack and how you did all your woodpeckers. It also looks like 3 separate sections with a shiny piece of metal in between.
Hi Jason , love your builds. I have done some... to how you did it. I only have 2 questions, why break the whole board on yr tablesaw, why not a track saw. Also your dados, why not use n router.
Been watching for years. You’ve been SO helpful! Thanks for that!! Quick question if you see this. I’m about to make 2 hanging cabinets. Is this style appropriate for that with just the glue securing bottom? Should I add some nails or pocket holes anywhere for that bottom piece? Or would you move the dado up to a rabbit and slide bottom in instead? Why am I scared the glue won’t hold over the years for that base piece? 😳
I’m a complete novice and I’m wondering if it’s best to paint the cabinets before or after assembly? Any advantage either way as far as achieving the most professional, polished look possible?
Hello, "apswirl" Currently, I build stained-varnished cabinets, and I prefer finishing the parts (after cutting and sanding) and then assembling them, especially because I apply the finishes with a good brush. This preference prevents uneven and unsightly coats in the corners and along joints. Touching up is possible too. Mind you, I take time (I'm retired) to mask my glue-edges so that I can still "glue and screw." Additionally, you must give adequate drying time to all coats of finishes. So plan your work. While waiting, start or work on another project or cabinet. If painting--by brush or sprayer--consider applying finish to at least the inside of your cabinets before assembly. For the exterior, at least priming parts might be considered. Finish the exposed parts of the cabinet after filling and high-grit sanding between coats.
Thanks for putting merging these videos together. It flowed well and will be a great resource for me. I really appreciate your talents and humor! So here is one for you.... If I said I enjoy your humor, would I be a humidor? Dad jokes! LOL
Hi Jason. I m on my first project after binge watching your videos for a few years. It’s a fancy siporex built kitchen in which a have to fit drawers, shelves and doors all around. Of course nothing is really square. Everything is squarish. So here’s my request, if you’re ever gonna read this: how to fit drawers in squarish builds. This topic is very poorly addressed, so there you go.
Hey there, I hear alot of these standard things, like 1/16" gaps between drawers and standard drawer depth, stuff like that. Is there some reference to these standard offsets and measurements?
OK Jason, I have a question for you. I watched the three part cabinet making videos and now I have watched this video, and in none of them did I see how to hide the seam between the cabinet box and the cabinet base. In the cabinets, I am building The edge of one side will be visible. Now I noted where you used the oreo cookie looking Epoxy between the cabinet face frame and cabinet will this work for the seam between the base and cabinet as well? I am planning to paint these cabinets as well, not staining.
I’ve been wondering this since the first time I saw these videos: why did you put the support piece of the toe kick so far to the right side instead of in the center?
I love your work,it's awesome.I kinda work with wood but not as good as you.I have done a lot of leather working.It would be so awesome to see you work with a pro leather worker building a desk with cabinets above with doors and lighting to be used as leather working bench .With a marble inlay stone for tooling leather and decorative leather inlays tooled by the leather worker.Hopefully he does some of the wood work and you do some of the leather tooling..I know huge video..But cool to see the swapping of skills and finished cabinet project.I bet it would be beautiful. Thank you for videos,I learn a lot from you
Hi Jason, it looks like you have linked every tool/product except the one that might change my life - the epoxy filler, and you didn't show the package in the video. Would you please link that product? I have tried several products to eliminate the transition from ply to dimensional, to no avail. I can always see that joint.
Im a newby and you lost me when you went to make the drawer faces. Or is it because its 10:35 pm here in deep east texas. Enjoyed the video, you do amazing work
Just throwing it out there - I’d love a video on how to make a freestanding cabinet (i.e something that won’t be butted against another cabinet or an appliance or wall, like a sideboard or console). It seems like every “cabinet” video on UA-cam is about kitchen style cabinets where the look of the sides don’t matter and usually they’re built without a top assuming a kitchen countertop is going to be placed on them. Shamelessly, this is something I’m trying to build and trying to find examples on UA-cam is tough. I know you have your hutch video but something done with plywood for the panels would be beneficial for those of us without the ability/tools to mill up rough lumber into panels.
Where did you here the phrase: "Easy Peasy Lemon Squeezy"? I'm just curious! Let me know & I'll tell you where I heard it! I really like your style of cabinet making! Which, it embodies that phrase perfectly! 😁
I’m sure it’s me being slow… but I’ve watched the video a few times and I must keep missing it or he didn’t say😂 when making the kick plate why was there a random piece in the middle at one side and not 2 in the middle evenly spaced? Is there a reason or just preference. Thanks.
Your cabinet plans show 1/4" MDF for the cabinet door panels. The instructions say rabbit all 4 sides 1/4" deep so the front side is inset, and the back side is flush. If the MDF is 1/4', how do you do a 1/4" rabbit?
perhaps i am algorithm blind and just trapped watching the same things. i have been watching vids thinking about building cabinets for my kitchen v.s. buying cabinets. i have seen the different builds and finishes on many channels and in my head there is still a disconnect. what woods? if i paint cabinets but not drawers what do i do with the cabinet insides? just leave them raw wood? unprotected? clear coat? to build cabinets and paint them is ok. but it somehow seems unfinished. what do you do with the insides of your drawers and cabinets?
You don’t want to leave them raw. You could but it obviously won’t look good and they’ll yellow over time. If you’re painting your cabinets white you can use pre finish plywood, or white melamine. If you’re staining them you can use pre finish plywood or maple melamine. These woods are for the insides and you won’t have to paint or clear coat. The only time you paint or stain the inside of your cabinet is when it’s going to be seen. Cabinets without drawers, cabinets with glass doors, or open cabinets etc. If you do face frame cabinets and you’re painting them you can use poplar wood. It’s not a pricey and it’s durable. If you’re staining them that will depend on what wood you’re using alder, maple, white oak, red oak, walnut etc.
Aside from the excellent technical advice, I enjoy your whacky sense of humor. Putting in a day's work with you would be fun.
Ty so much! I practiced a lot, invested $50K in a shop, I quit my job and now making cabinets!!
Enjoy woodprix woodworking instructions.
This time I'll use woodprix instructions to make it by my hand :)
I know you can get solutions for that on WoodPrix.
Really Jason? My Saturday enjoyment of Bourbon Moth, was a re-run... now I need to give the family attention.
feel you
I decided to play it on loop in the background of my shop to help him get viewers so he can get something out of giving us free content
I prefer to build with woodprix plans.
Hmmm I finally followed Robert's advice and took WoodPrix instructions. It's great for beginners, and has some advanced stuff too.
Just an excellent job all around. Every step included, easy to understand.
This is my weekly project. Nice timing.
I wish people did more projects on furniture with hidden storage.. I loved your hidden pop out drawer
Same
Nice work dude, love the goofiness you put in, makes the build more fun!
Thanks for all this info. I have made a number of cabinets but it really helps to get your insight and tips on this, especially the undermount slides. One question: when making the shaker panels, why don't you use the router table with a set of shaker bits? It seems to me to be much easier than all the settings necessary to do it on the table saw.
You know what's weird? I'm building my shop in my basement. I just finished walls and flooring. I'm at the shop cabinet/wall bench/workbench stage. Cabinets are the first to begin. I've been thinking for a few weeks about my cabinets. The past 2 weeks, all my woodworking youtuber subs have been making cabinet videos. Effin Google, listening to my cabinet rants to my wife and then telling these guys to make cabinets. Lincoln Street, Bourbon Moth, Jason Bent, MWA... All cabinet videos this week.
Shara of Woodshop Diaries makes great cabinets, too.
Now I have 4 videos on this. Thank You and God Bless 😊
Bro! Watching you from east Africa Kenya. Really enjoy and gaining my skills from your videos.
You are Top bro
Well done. Easy to watch and just enough detail to understand.
Working with you is my dream man, very funny and hardworking dude
Super awesome vid. Thank you buddy! Can’t wait to build my shop cabinets
Greetings from Sweden. I am having lot's of fun following your project.
Wow, a completely perfect cabinet build video which was easy to follow and I believe, achievable for me!
Well done, Jason!
Would love to see you build a hidden door cabinet.
Hidden door cabinet??? Do you mean blind corner/hidden corner cabinet?
@eugenewilson7555 I'm talking about a cabinet that swings out to be a door to a hidden room.
I have cabinets i got from my parents old house. They are the lightest plywood ive ever felt and no fancy joinery. Plastic brackets hold all the the corners together. They held heavy stuff for years, now going in my garage, but they look nice.
I've had really good luck using Bondo for paint grade seams. I even use it for interior trim with zero issues.
Thank you for a great tutorial
Great work, it looks amazing! As well the music you have chosen to underlay the video I do like.
I was going to give you crap about not hooking the bottom part of that woodpeckers corner clamp in the right orientation but then I realized you did it on purpose because otherwise it wouldn’t have fit on the table. You’re smarter than I look…lol.
OUTSTANDING VIDEO! Easy to follow along and very thorough. I will definitely be refering back to your video. Very helpful and Thank you for reposting this entire video!
Jason, I found your cabinet instructions very helpful. I appreciate your finishing instructions too. One thing that would be great is hearing your thoughts on finishes to showcase the wood in addition to painting. I've been planning white oak face frames/doors but there just isn't much info on good finishes for these, especially if you want to add some color. Thanks!
I flush trim the overhanging face frame against the plywood side. That way you’re just filling any cracks between the two.
I see what you did there... you get views on each original series episode, then eventually circle back and get fresh views on the complete series put together into a single video. Brilliant! Oh, and thanks for making this complete version, as now I don't have to go looking for all the others.
i had to immediately sub when i saw the slid in entrance!!😆😆
Thank you so much for sharing this as one cohesive video
A whole hour! What a treat. Erm beards back... ?
Hallo from Germany and thanks a lot.
I was on a plane this week and was looking for exactly this series to watch, and it was tough finding all 3 in order. This is a great idea.
Can you please make a video showing the difference between using these drawer slides vs. the much less expensive versions that appear to do the same job as these do??
Is the birch ply for the drawers 3/4” or 1/2”? Thanks!!
What a wonderful video! Thank you
I’d like to see a close up of the clamp rack and how you did all your woodpeckers. It also looks like 3 separate sections with a shiny piece of metal in between.
Hi Jason , love your builds. I have done some... to how you did it. I only have 2 questions, why break the whole board on yr tablesaw, why not a track saw. Also your dados, why not use n router.
Love the deck of cards trick!
Brilliant
Could you use a flush trim bit to quickly remove that line when attaching the face frame? Does that do something negative to the finish?
Good tutorial.
what do you recommend for cabinet paint?
The tunes… Khruangbin?! So nice.
So Jason doges beard gate questions for another week! We’ll get you one day Hibbs!
the toe kick is attached to the feet they have handy dandy clips you screw to the toe kick that come with the feet that you can just kick into place.
thank you for putting them together
Thank you. This helps. Also another trick on words to remember. . Stiles stand. rails enjoy the ride
I like cutting it into the panels.
Do these cabinet plans include hinge and drawer install? Thanks!
Been watching for years. You’ve been SO helpful! Thanks for that!!
Quick question if you see this. I’m about to make 2 hanging cabinets. Is this style appropriate for that with just the glue securing bottom? Should I add some nails or pocket holes anywhere for that bottom piece?
Or would you move the dado up to a rabbit and slide bottom in instead?
Why am I scared the glue won’t hold over the years for that base piece? 😳
Just when you thought the plot was gonna advance on your favorite show, boom, you get the dreaded clip/recap episode.
You are amazing and very funny too
I’m a complete novice and I’m wondering if it’s best to paint the cabinets before or after assembly? Any advantage either way as far as achieving the most professional, polished look possible?
Hello, "apswirl"
Currently, I build stained-varnished cabinets, and I prefer finishing the parts (after cutting and sanding) and then assembling them, especially because I apply the finishes with a good brush. This preference prevents uneven and unsightly coats in the corners and along joints. Touching up is possible too. Mind you, I take time (I'm retired) to mask my glue-edges so that I can still "glue and screw." Additionally, you must give adequate drying time to all coats of finishes. So plan your work. While waiting, start or work on another project or cabinet.
If painting--by brush or sprayer--consider applying finish to at least the inside of your cabinets before assembly. For the exterior, at least priming parts might be considered. Finish the exposed parts of the cabinet after filling and high-grit sanding between coats.
Thanks for the insights!!
One question, is it better to build the cabinets off site and carry them in or build on site (in place)?
What are the pros and cons of each.
Where did you get your branding iron that you use on the cabinets you make
Ahhh Jason!!! 😂 I love how you're slyly rippin on Morley Kerts pallet furniture 🤣
Never heard of him, but Jason of Epic Upcycling makes some truly beautiful furniture out of pallets!
This episode should be entitled 'The Beard Continuity Conundrum'
Thanks for putting merging these videos together. It flowed well and will be a great resource for me. I really appreciate your talents and humor! So here is one for you.... If I said I enjoy your humor, would I be a humidor? Dad jokes! LOL
Hi Jason. I m on my first project after binge watching your videos for a few years. It’s a fancy siporex built kitchen in which a have to fit drawers, shelves and doors all around. Of course nothing is really square. Everything is squarish. So here’s my request, if you’re ever gonna read this: how to fit drawers in squarish builds. This topic is very poorly addressed, so there you go.
Hey there, I hear alot of these standard things, like 1/16" gaps between drawers and standard drawer depth, stuff like that. Is there some reference to these standard offsets and measurements?
I'm wanting to make a set of cornhole boards for my friend. What finish do u suggest since they will sometimes be out in the sun?
OK Jason, I have a question for you. I watched the three part cabinet making videos and
now I have watched this video, and in none of them did I see how to hide the seam
between the cabinet box and the cabinet base. In the cabinets, I am building
The edge of one side will be visible. Now I noted where you used the oreo cookie looking
Epoxy between the cabinet face frame and cabinet will this work for the seam between
the base and cabinet as well? I am planning to paint these cabinets as well, not staining.
Thank you for the helpful, easy-to-follow videos and plans! I bought the plans for the outdoor patio chairs and they turned out beautifully!
first i thought wow, 1 hr Video, much long. But at the end it was interesting, informativ and i was entertainted, thx greetings from germany
Thank you!
I’ve been wondering this since the first time I saw these videos: why did you put the support piece of the toe kick so far to the right side instead of in the center?
I love your work,it's awesome.I kinda work with wood but not as good as you.I have done a lot of leather working.It would be so awesome to see you work with a pro leather worker building a desk with cabinets above with doors and lighting to be used as leather working bench .With a marble inlay stone for tooling leather and decorative leather inlays tooled by the leather worker.Hopefully he does some of the wood work and you do some of the leather tooling..I know huge video..But cool to see the swapping of skills and finished cabinet project.I bet it would be beautiful.
Thank you for videos,I learn a lot from you
Can you please tell me the name of the drawer slides you use in this video?
Cheers
Video chapters would be super helpful… where’s the bit on toe kicks?
How about running it through a still? It would not really be mead at that point I guess but would be a mead liquor?
This is great
What is the purpose of the off-centered support piece in the kickplate base?
How does that dado stack have a riving knife?
Hi Jason, it looks like you have linked every tool/product except the one that might change my life - the epoxy filler, and you didn't show the package in the video. Would you please link that product? I have tried several products to eliminate the transition from ply to dimensional, to no avail. I can always see that joint.
Can I ask a simple question and excuse if it was already asked? What is the width of the face frame 3/4 x ?
Would really like to see you fuming white oak i think its really lovely looking
Cool, a Bourbon Moth Woodworking Marathon. You could have one of these once in a while, like having a fine whiskey.
What is the Mohawk two part putty you used? I went to Amazon, but I don't see anything the resembles what you were using.
I can’t find it either
Time for a “Rule of Toe Thumb” shirt.
Wherefore art thou link to the Mohawk epoxy you did use?
Im a newby and you lost me when you went to make the drawer faces. Or is it because its 10:35 pm here in deep east texas. Enjoyed the video, you do amazing work
Does anyone use a design program to make plans for their builds. If so what do you use or recommend?
did you buy your 600 clamps all at once or over a couple of weeks?
Bro! How do you do the countertop?!
Looks great! However the bottom drawers could be a lot deeper. About 2 inches more!
My autism fricking loves long video guides!
Hi fellow Jonathan on the spectrum! These videos speak to me and I have built several cabinets while hyperfocused.
@@rajon25 hyperfocus is life!
During the video and using the miter saw, you used a Woodpecker’s stop vs the JKM. Is a sponsorship on the horizon?
I like this video ty
Would love a bourbon moth poker table build video. The current UA-cam vids are awful.
Just throwing it out there - I’d love a video on how to make a freestanding cabinet (i.e something that won’t be butted against another cabinet or an appliance or wall, like a sideboard or console). It seems like every “cabinet” video on UA-cam is about kitchen style cabinets where the look of the sides don’t matter and usually they’re built without a top assuming a kitchen countertop is going to be placed on them.
Shamelessly, this is something I’m trying to build and trying to find examples on UA-cam is tough. I know you have your hutch video but something done with plywood for the panels would be beneficial for those of us without the ability/tools to mill up rough lumber into panels.
Thank you! I've watched those videos many times. I had to favorite them in order to find them easier but utub tried to make it difficult.
Where did you here the phrase: "Easy Peasy Lemon Squeezy"? I'm just curious! Let me know & I'll tell you where I heard it! I really like your style of cabinet making! Which, it embodies that phrase perfectly! 😁
I’m sure it’s me being slow… but I’ve watched the video a few times and I must keep missing it or he didn’t say😂 when making the kick plate why was there a random piece in the middle at one side and not 2 in the middle evenly spaced? Is there a reason or just preference. Thanks.
“I’ve been framed!” Best lamest joke ever. 😂
Thank you for this
Does your plan come in the only true respectable measurements of millimeters?
Your cabinet plans show 1/4" MDF for the cabinet door panels. The instructions say rabbit all 4 sides 1/4" deep so the front side is inset, and the back side is flush. If the MDF is 1/4', how do you do a 1/4" rabbit?
Really want one of those Bourbon blades...short on cash. Maybe later😢
Well at least we got the beard back!
perhaps i am algorithm blind and just trapped watching the same things. i have been watching vids thinking about building cabinets for my kitchen v.s. buying cabinets. i have seen the different builds and finishes on many channels and in my head there is still a disconnect. what woods? if i paint cabinets but not drawers what do i do with the cabinet insides? just leave them raw wood? unprotected? clear coat? to build cabinets and paint them is ok. but it somehow seems unfinished. what do you do with the insides of your drawers and cabinets?
You don’t want to leave them raw. You could but it obviously won’t look good and they’ll yellow over time.
If you’re painting your cabinets white you can use pre finish plywood, or white melamine. If you’re staining them you can use pre finish plywood or maple melamine. These woods are for the insides and you won’t have to paint or clear coat.
The only time you paint or stain the inside of your cabinet is when it’s going to be seen. Cabinets without drawers, cabinets with glass doors, or open cabinets etc.
If you do face frame cabinets and you’re painting them you can use poplar wood. It’s not a pricey and it’s durable. If you’re staining them that will depend on what wood you’re using alder, maple, white oak, red oak, walnut etc.
you advertised for a plan tghat is the same you are making with the ultimate cabinet building guide - how can we order than plan.
thanks,
Ken