Soldering Iron Hack | Soldering tips
Вставка
- Опубліковано 29 вер 2024
- 🔰 In this video I'm going to show you Soldering tips
1) Find a high-quality soldering iron
2) Use the correct iron tip shape and size for the task
3) Use the right solder for the task
4) Tin and clean your iron tip
5) Apply heat properly
6) Let a solder joint cool on its own
7) Inspect your solder joints
8) Use proper ventilation / fans / PPE
9) Practice!
If you enjoyed this video, as a support to grow up my UA-cam channel, don't forget to subscribe, like, share and comment to my channel
you can also get every upcoming update about my new creations on my social media platforms. so don't forget to like those.
✔️ Subscribe Us on UA-cam
/ @easyproject4uofficial
WARNING:
Some ideas and experiment can be dangerous and for that you don't risk and damage you're self
⭕If you like My Channel:
✅Like
✅Share
✅Comment
SUBSCRIBE for more videos Also click on notification 🔔 icon. Thanks for watching...!
#Shorts #hacks #diy #tipsandtricks #tips #howtomake #hacks #hack
Single transistor powerfull universal LED tester circuit - ua-cam.com/video/CDYrsNWEirU/v-deo.html
😂😂😂
Or you could learn to solder properly. You’re supposed to heat the copper with the iron and apply the tin to the wire itself
Always remember to tin the iron *before* you heat the copper wire up and apply tin. This is the absolute best beginner advice I can give to someone.
What a terrible day to be able to see
😂😂😂
So now you have one cut and exposed wire covered in solder at the tip. What exactly is that going to accomplish?
Its a demonstration
Tem vídio que é uma perda de tempo
Thanks for commenting
Dude, you are wasting your time
NO FLUX --Is this real ?
Flux is for pu$$ies
MUCH SAFER WAY:
1. Heat copper wire for around 1-5 seconds
2. Grab your tin and directly apply to the copper wire
3. After the tin sticks perfectly, stop adding more tin
4. Keep heating the tin for around 2 seconds
5. After 2 seconds, stop heating the copper wire
6. Don't blow! Wait the tin to cool naturally
7. Perfect tin applied!
If he would have used flux before applying the solder then it would gave worked as it always has . But he didn't even wait fot the iron to heat up correctly and he didn't use flux . All for the sake of showing off his little tiny solder up , you see if he would have spoken and explained like if you have Lotz of wires u need to solder this is a faster way , but to show that wanna be fail . I say wanna be cause he dam well knows he left the flux out intentionally to trick the simple minded and in the process ha a made himself look like a copy Content and a fool
@@houseofpainINKSthat's actually not true do better
@@houseofpainINKSthats 101% correct
It didnt work, because this is not the way that you solder. You should hear up the copper wire and apply it near the soldering iron, also, NEVER MODIFY YOUR SOLDERING IRON ON YOUR OWN
And why not ? Cause I modify a whole lot of sht I own , hell I fixed my very dji mavic zoom after someone crashed it ,it wouldn't take off because of a part in the gimble so I ordered some parts and put it together myself a d it flew I modified a females hair straining iron to use it to press my buds and make my own dabs. And now I'm about to modify my soldering iron for tiny solutions of some big issues I encounted., as long as the person has some common sence then why not buy the majority don't have it
why not modifying it? that's called tinkering buddy
Als je het goed doet is de normale manier prima!
Thanks for commenting
Stupidity. You need to clean the copper wire with a blade first (if it is dirty & dull) till it is shiny. Then twist the strands , dip it in good quality solder flux & then solder it with a good quality solder wire.
Guys, they are farming for comments and engagements. If you see these kinds of videos just move a long. Or just report.
Mal, muy mal! Para que perder el tiempo en inventos absurdos, mejor ponle Flux o pasta para soldar
I’d call these unethical but uniquely brilliant if what you’re soldering requires a dip and nothing else to join it with 😂
AMTECH பிளக்ஸ் பேஸ்ட் அப்ளை பண்ணி சால்டரிங் பண்ணுங்க கரெக்டா இருக்கும்❤
Ok don’t use common sense and put the iron under the wires then feed the solder into the wires
Porque quienes no saben usar un soldador quieren enseñar como usarlo?
Would be fine if the tip was clean
I need to send this man a cordless dremel ain’t no way
Very bad idea, West of time , Electricity bill, Soldering wire, alluminium nob...
Thanks for comment
@@easyproject4uofficial Most welcome...
Or just buy a soldering paste 🙄
Làm chẳng ra cái ôn gì cả
10 rupaye ke pest la istamal karna ab se
Флюс
Thanks for commenting
Покинул чат))
Принял ислам
Who's the top tune by
Не актуально. Сейчас китайские провода не паяются от слова совсем. Только под обжим
What a waste of time.
This is horrible.
xtaipatri...x
1. apply solder directly to the part/wire, not the iron.
2. use flux to stop oxidation
no need for this silly contraption that puts you in unecessary danger.
Bro the tool was meant to put solder into it like those buckets they dip solder parts into I could immediately tell. If you put it on the wire you now have to put both the wire and the solder in just put a lot in to dip your wire. It’s meant for DIPPING
@@toxicity6629 it just don’t seem like the best way of doing a wire. You get perfect coverage, but look how much oxidation is on the tin doing it this way. Coverage isn’t the same as quality. Just do it the right way
Hi
Good
Ich verstehe zwar den Ansatz aber Erfolgversprechend im Ergebnis, sieht es beides nicht aus.
Hl para aser directamente con un conector un alambre podrías hacer un video
🙏🙏🌹🌺🥀👑♥️🎊
👉❤️👈
Giỏi quá, quá giỏi,
Không làm giỏi hơn nữa.
Thanks for commenting
Panne ! du fer à souder ! pas terrible poubelle !! voilà voilà
bien dicho niño, si no sale bien vuelve a hacerlo hasta que funcione, lo importante es la creatividad, la experiencia se obtiene mediante el trabajo y se aprende por repetición. lo único q te crítico o no te sugiero es que lo hagas paso a paso y explicar el material y como hacerlo más despacio, porque tú sabes, pero muchas personas no. felicidades espero y nos enseñes más cosas. gracias
Esta mal hecho desde el principio, se coloca flux o pasta en el cable, y se pasa el cautin con estaño y listo, el mismo estaño se esparce por si mismo
How’d they get a German Shepard?
И стоило из за одного провода так жопу рвать?
A lot simpler to clean your soldering tip
Yes, thanks
Use resin or flux
Clean the tip
Buy a new iron tip
Wow
Wow
😂😂😂😂
а флюсом пользоваться не учили ?
Не учили, половино тех кто вообще умеет паяльник в руках держать не понимают для чего нужен флюс и пренебрегают его использованием
เพื่ออออ!!!!