Had been waiting on this video.. Jose is a top notch mechanic, always diagnoses my truck 100% accurate. Great shop and service . My truck never leaves their shop with mechanical issues, always gets fixed the first time. Props to Jose...
Very nice. In the future it would be nice to see what a properly adjusted valve feeler gauge looks like. You covered both too tight and too loose but not Goldie Locks just right :-)
Valve adjustment is suppose to be adjusted at predetermined mileages/hours listed in the service manual. I recommend every 225-250k miles or when in depth mechanical troubleshooting or anytime the rockers are removed/replaced for any # of reasons
I think I need this done to my truck. MPG has dropped from 9 to 8.4 and very slow acceleration even with cruise on. What’s the ball park price range for getting this service? It’s a 2019 Cascadia 126slp DD15 engine
Great video. Big tip tho. Turn the original audio down and do a voice over, especially when you in the shop, or you in big open areas, or pretty much always. Yeah
If u hear engine got louder when idling than it was before. U can tell the difference. U also compare your engine noise to other similar trucks by standing front of your trucks hood.
Can you suggest a good company to buy these set of tools from? And by your opinion, what are some bad companies to get tools from? Once again, great vid. I’m sure us viewers will watch this as reference time and time again. Especially automotive schools!
ВЫ меня извените я механнник с 20 летним стажем и вот что думаю как можно рассказывать о регулеровке клапанов что некто и понять не может Вы сами понимаете что делаете???
Hello friend. With respect, this video is of very little value for a truck owner/home mechanic. Insufficient info (fast forward) on methodology for immobilizing engine/rotating engine, then you didn't even show us how valve adjustment is performed, nor how adjustment is retained. I'm guessing it's clockwise on the torx screw to tighten, counter-clockwise to loosen, with locknut loosened before/after adjustment. Could you clarify that please? Thanks.
Had been waiting on this video.. Jose is a top notch mechanic, always diagnoses my truck 100% accurate. Great shop and service . My truck never leaves their shop with mechanical issues, always gets fixed the first time. Props to Jose...
Thanks for sharing your feedback Jose! We appreciate you too.
@@TruckYoo where are you guys located ?
Where is the shop at?
The doctor is in now... jose ,you are a great mechanic
👍🏼 I enjoyed this video, plenty of good information and cool 😎 soundtrack. I like the hands-on perspective. Jose thorough as always.
Thanks for watching!
Very great camera work and tutorial! Thank you
Impressive to watch a master at his craft. Thanks for taking the time
Great video I was thinking of doing this myself and now I see it's not that bad.
Please do a video on Series 60 DD15 reliability and a Western Star quality comparison. Thanks.
Awesome guys! Thanks for this video! Very valuable information!
Helpful video!!! Thanks and keep up the good work!!!
Great instructional educational video thank you for sharing it
Thanks for watching Alex!
GOOD WORK❤👍
Very nice. In the future it would be nice to see what a properly adjusted valve feeler gauge looks like. You covered both too tight and too loose but not Goldie Locks just right :-)
Thanks for watching
Thanks for the video. Should an oil change be done when the engine is opened up like that?
How do u know when the valves need adjustment?? Are there signs?
I am wondering the same
Valve adjustment is suppose to be adjusted at predetermined mileages/hours listed in the service manual. I recommend every 225-250k miles or when in depth mechanical troubleshooting or anytime the rockers are removed/replaced for any # of reasons
Very easy overhead adjustment
Can you do video for d12 engine as well?
I respect your skills
Doesn’t the valve cover always have to be resealed or a gasket in between?
No
How much do you guys charge for this service? How long does it take?
can you do video for d13
How much they charge for 2019 cascadia valve adjustment
Super, thank You.
I think I need this done to my truck. MPG has dropped from 9 to 8.4 and very slow acceleration even with cruise on. What’s the ball park price range for getting this service? It’s a 2019 Cascadia 126slp DD15 engine
Thank you🎉, 👍 good 🙏
overhead adjustment & tuneup is same thing??
After this do we replace valve cover bolts?
Where are u located. I'm gonna need this done on mine in 80k miles
Wuow excelente
Great video. Big tip tho. Turn the original audio down and do a voice over, especially when you in the shop, or you in big open areas, or pretty much always. Yeah
Anyone know how much a valve adjustment like this should cost?
Where’s the shop?
How do you know when you need a valve adjustment? I'm at 586k miles now on my dd13.
Any info appreciated,
If u hear engine got louder when idling than it was before. U can tell the difference. U also compare your engine noise to other similar trucks by standing front of your trucks hood.
When is the first time adjustment due on the
Dd15
Where are you guys located
Wish u would have shown the actual adjustment.
i thought you were suppose to use blue thread locker on the adjusting studs to the jam nut, and torque to 37 ft-lbs
Where’s that at …I want this guy to work on my truck
Bad boy and his tools
Valves need alignment every 100k/250k and 460k don’t make the mistake of replacing injectors until you readjust your valves.
What is the purpose of overhead valve adjustment
Can you suggest a good company to buy these set of tools from? And by your opinion, what are some bad companies to get tools from?
Once again, great vid. I’m sure us viewers will watch this as reference time and time again. Especially automotive schools!
The music was the only thing I liked 😂
FEW MORE VIDS LIKE THESE I CAN START MY OWN REPAIR BIZ A BLOCK AWAY..OR WE CAN JUST MAKE A DEAL AND BECOME PARTNERS.
We don’t know you!
Man I will drive all the way to the chi to get my shit done by them with no problem
What song is that 4:50
Pet Shop Boys "It's a sin"
Could you please define"rotation"?
Engine rotate
I mean how far.
ВЫ меня извените я механнник с 20 летним стажем и вот что думаю как можно рассказывать о регулеровке клапанов что некто и понять не может Вы сами понимаете что делаете???
How many hours does this job pay?
Hello friend. With respect, this video is of very little value for a truck owner/home mechanic. Insufficient info (fast forward) on methodology for immobilizing engine/rotating engine, then you didn't even show us how valve adjustment is performed, nor how adjustment is retained. I'm guessing it's clockwise on the torx screw to tighten, counter-clockwise to loosen, with locknut loosened before/after adjustment. Could you clarify that please? Thanks.
Background music
4.6 what
Need a mechanic really bad
First of all I not a negative person . Sorry I didn't think you went in depth
What I mean by is not enough explaining between the A and B rotation what value to set at what time
Maybe they don’t have the time to do all of that, they just want to show you “kinda” how it’s done, they still need customers to come in for service
how do u know u need valve adjustment i have a 2018 cascadia 460k
If you didnt have one yet. Do it