Sorry to hear about you calamities, and It is very good that you are on the mend. I think you have the best videos about the RC600. They are so very clear and concise. Thank you and welcome back!
Thank you! New to the 600. That just solved a major mystery. Coming from Ableton and was thinking of throwing it in the trash and going back to Ableton!
this is crucial! few of my songs have the same number of measures in each section. loop sync must always be set to MEASURE. now i have to double check 40+ song memory’s. ug
I've been using the Boss rc10r and this damn thing is not user friendly if that's the format your expecting. I still haven't got the drum tracks to successfully play different patterns for each track. I'm going to be trying your idea from the other video where you put them on the stop buttons. Pulling hair and grinding teeth with this thing thinking it was going to be a simple as the rc10r. And this video is great because that was the other issue I couldn't figure out but you don't have to mess with on the rc10r. Thank you very much
Интересно было бы увидеть как третий трек записывается последовательно после первых двух! В цулом мое мнение, что долдна быть основа и можно смешивать первые два трека, а третий четвертый уже как отдельные партии. И пока я разбираюсь)
Thanks for the explanation, was wondering is INC or DEC could be combined with WRITE simultaneously. Would it be possible via CTRL to assign two (or more) function to one button. INC+WRITE and DEC+WRITE. Regards, Carli
Great work mate. Thank you. Can you do a really simple quick video on how you would run a basic song INT+V1+CH and how you set it up for that?? I’m a beginner and it gets to complicated for😂 me. THANK YOU 🙏🏽😃👍🏽🎸🎤
Can I ask if you are on Loop sync with Measure, is that better in someway than just timing for clicks with your foot pedal at the end of the bar? Is that more difficult than using looP sync. I’m really not quite clear what advantage loop sync does.
I was having an issue with recording a loop and when playing it back, I would hear the loop with about 4 beats of silence at the end. I turned off the loop sync and that no longer happens. How do you enable loop sync and not have the problem I mentioned. Thanks for the video.
just purchased the RC600. Updated to the newest software. it works well for a song or two (sometimes) But my overdub tracks slowly start losing timing with the rhythm after about 30 seconds to a minute or so. Any suggestions
Hello Teerj. You have a lot of interesting videos. I’m thinking about to buy one these units; I’ve been using an old boss rc 50 for several years so it will be a huge step form me. I would like to ask you if you can set the looper with 2 or 3 tracks per part of a song. Something like the mode 2x2 by Aeros looper. My goal would be to have 2 or 3 parts of a song with 2 or 3 layers/tracks per part and play or stop them on the fly. And another question: is it ok the rc 600 sync with other devices as a beatbox, specially when you are changing between parts of the song?. Thanks in advance for all your answers. I hope to read you soon.
I have a question. I wonder if you could do a simple and clear video on how to do different rhythms including different drum kits per track via in single mode? Anyways it’s all good and thank you.
This is something that I'm also looking for. I think it is essential, but I couldn't figure it out or find someone who does. a video about changing rhythms for different parts of a song would be appreciated!
transitioning from the rc300 to 600 has been unbelievably frustrating. the 600 is incredibly unintuitive. The boss boneheads seemed to have gotten lucky with the 300 and ed sheeran making it famous. Boss seems to have very little idea of how people actually use this thing or how to make it so a human can understand and navigate the menus. Thanks for your help
Can you verify your settings for doing live looping Wid a few tracks might be single and of course one track for percussion might be multi See use measure How do you set your sync settings I did have mine working now I've lost it
I dont have that feature on mine meaning i have to upgrade the software which means it will be unusable :/ Edit: just found out turning loop synch off solves the problem. Phew Edit: when the loop synch off after a while it loses the rhythm synching. What is the point of loop synch off it its not gona keep track of the rhythm? I give up
Sorry to hear about you calamities, and It is very good that you are on the mend. I think you have the best videos about the RC600. They are so very clear and concise. Thank you and welcome back!
Thank you!! I play free form ambient stuff- and was super frustrated. This fixed it right up!
Thank you! New to the 600. That just solved a major mystery. Coming from Ableton and was thinking of throwing it in the trash and going back to Ableton!
Had the same issue - till now! Very helpful! Thank you very much!
Glad to know you’re doing better man, thank you so much for the content and tips!!
Thanks for making these vids bro u r great at making this simple. I just got one recently and there is so much to it but your guides are fantastic.
I’m glad you’re back in your health is relatively good. I learned a lot from your videos. Looking forward to more. Nice music!
got it.
can u explain briefly how you set your pedals up, i think its confusing you click the stop button to start the other track etc
this is crucial! few of my songs have the same number of measures in each section. loop sync must always be set to MEASURE. now i have to double check 40+ song memory’s. ug
Wow!!!!!! Sounds like a serious summer! Just found your Chanel as I’m looking to get the rc 600. Hope you recover well:)
So glad yer feeling better!!
I've been using the Boss rc10r and this damn thing is not user friendly if that's the format your expecting. I still haven't got the drum tracks to successfully play different patterns for each track. I'm going to be trying your idea from the other video where you put them on the stop buttons. Pulling hair and grinding teeth with this thing thinking it was going to be a simple as the rc10r. And this video is great because that was the other issue I couldn't figure out but you don't have to mess with on the rc10r. Thank you very much
Интересно было бы увидеть как третий трек записывается последовательно после первых двух!
В цулом мое мнение, что долдна быть основа и можно смешивать первые два трека, а третий четвертый уже как отдельные партии.
И пока я разбираюсь)
Thanks and though a year late I hope your health is much better. Damn that sounds like a nightmare. Be well.
Thanks for the explanation, was wondering is INC or DEC could be combined with WRITE simultaneously. Would it be possible via CTRL to assign two (or more) function to one button. INC+WRITE and DEC+WRITE. Regards, Carli
Great work mate. Thank you. Can you do a really simple quick video on how you would run a basic song INT+V1+CH and how you set it up for that?? I’m a beginner and it gets to complicated for😂 me. THANK YOU 🙏🏽😃👍🏽🎸🎤
Can I ask if you are on Loop sync with Measure, is that better in someway than just timing for clicks with your foot pedal at the end of the bar? Is that more difficult than using looP sync. I’m really not quite clear what advantage loop sync does.
I was having an issue with recording a loop and when playing it back, I would hear the loop with about 4 beats of silence at the end. I turned off the loop sync and that no longer happens. How do you enable loop sync and not have the problem I mentioned. Thanks for the video.
just purchased the RC600. Updated to the newest software. it works well for a song or two (sometimes) But my overdub tracks slowly start losing timing with the rhythm after about 30 seconds to a minute or so. Any suggestions
Why to change each part you use the stop button of tue next track instead of play button?
Nice and thanks for the video. How are your rhythm set up? Sounds great! :D
Hello Teerj. You have a lot of interesting videos. I’m thinking about to buy one these units; I’ve been using an old boss rc 50 for several years so it will be a huge step form me. I would like to ask you if you can set the looper with 2 or 3 tracks per part of a song. Something like the mode 2x2 by Aeros looper. My goal would be to have 2 or 3 parts of a song with 2 or 3 layers/tracks per part and play or stop them on the fly. And another question: is it ok the rc 600 sync with other devices as a beatbox, specially when you are changing between parts of the song?. Thanks in advance for all your answers. I hope to read you soon.
Does it do verse - bridge - chorus?
I have a question. I wonder if you could do a simple and clear video on how to do different rhythms including different drum kits per track via in single mode? Anyways it’s all good and thank you.
This is something that I'm also looking for. I think it is essential, but I couldn't figure it out or find someone who does. a video about changing rhythms for different parts of a song would be appreciated!
transitioning from the rc300 to 600 has been unbelievably frustrating. the 600 is incredibly unintuitive. The boss boneheads seemed to have gotten lucky with the 300 and ed sheeran making it famous. Boss seems to have very little idea of how people actually use this thing or how to make it so a human can understand and navigate the menus. Thanks for your help
Can you verify your settings for doing live looping Wid a few tracks might be single and of course one track for percussion might be multi
See use measure How do you set your sync settings
I did have mine working now I've lost it
I dont have that feature on mine meaning i have to upgrade the software which means it will be unusable :/
Edit: just found out turning loop synch off solves the problem. Phew
Edit: when the loop synch off after a while it loses the rhythm synching. What is the point of loop synch off it its not gona keep track of the rhythm? I give up
Lol the intro. Did you piss off god or anything?