the one who milled the flywheel was a genius...that thing is going to explode , the milling has to be done to the external part of the circumference...than you must balance it again
You sure about that? It was done by a reputable workshop that has milled hundreds if not thousands of Vespa flywheels. But it doesn't matter, this is a super old vid. I have a SIP VAPE Ignition now.
Pretty much. The engine cases in this video are actually ETS cases, now running in a V90. The engine case design didn't change much over the years, though a V range manifold (the pipe between the carb and engine) is a different shape + stud pattern to later models like the PK and ETS.
+Guenounovitch Thanks :) not sure 'enjoy' is the right word, but when you finally get the jetting right and can ride it properly there's definitely a feeling of elation!!
+Guenounovitch Depends entirely on your setup! With the above, mine ended up around 122 main, 40 idle and a JJK needle. If you've time, read pages 10 and 11 here - it's my build thread from 2014: vespasmallframeforum.proboards.com/thread/14057/complete-jimmys-polini-tourer-project?page=10
2 strokes are like life, you can never be too rich
Bullshit it’ll foul the plug
the one who milled the flywheel was a genius...that thing is going to explode , the milling has to be done to the external part of the circumference...than you must balance it again
You sure about that? It was done by a reputable workshop that has milled hundreds if not thousands of Vespa flywheels. But it doesn't matter, this is a super old vid. I have a SIP VAPE Ignition now.
waaaaw amazing is the best my friends 👍🤤😁
damn good video quality. what did you film with?
Заливает у тебя! Слишком богатая смесь тут у тебя чувак
its good for engine running rich. A few more spark plugs so.
But not too much
Ma hai messo benzina o solo olio 🤣🤣🤣🤣
😂😂😂
😂😂😂 miscela al 99,9 %
28 caburator. Its ok. 30 mm dosent work?.
Man, that thing is gorgeous!!!!!!!!!!
nice but it was way too rich, just kidding, cant wait to build my vespa smallframe.
Haha! You'll have great fun. This is it finally on the road last year: ua-cam.com/video/gSzdOGfuXko/v-deo.html
Kilo keun weeh kang...!!!!😀😀😀
What jetting fixed the richness out of interest? Did you go down in main jet
James, where did you get the engine stand from, or did you make it yourself?
Can a yamaha 2stroke dirt bike block and head be fitted?
Now we know why lambretta is better 👍
You need a macoo 700cc 2 stoke in your scooter
Where d you get the oil filler screw
Good
👍👍👍
where did you get the air filter?
Id run ot rich on first start aswell lube it up lol
May I go to the country or where you live to know more about the vespa
Nice song ..with what brand block macine?
C'è un po' di benzina nel mio olio
Giorgio Giuliodori 😂😂
@@JamesDeVile 😂😂
cool man...😎
Nice haha 🤩
E un motore sfatto 5 messe in moto per farlo partire
È perchè è grassa la miscela
Sai com'è c'è cilindro e albero nuovo🤦♂️
Siii vabbe piu grassa la miscela non potevi mamma miaaa
Si si lo so. Questo è stato il primo inizio! Ora è perfetto! Tutti questi commenti dicono la stessa cosa 🤣
Hate to tell you, but it seemed to be a bit rich.
polini schlappen! :) sportlich
Rich?? It's a milionary !
why is that black unburned fuel coming out of the exhaust?
Cos it was running waaaay too rich. Getting it running was the first step, jetting correctly was a longer and less satisfying process!
Jetting is painful lol
Hello do you know if all small frame engines are compatible to other small frame?
Pretty much. The engine cases in this video are actually ETS cases, now running in a V90. The engine case design didn't change much over the years, though a V range manifold (the pipe between the carb and engine) is a different shape + stud pattern to later models like the PK and ETS.
Hi, what is drt runner and pm40? Thanks
Drt runner is the small gear shaft in the engine, pm40 is the name of the exhaust
Hey dude ! Nice build :) did u enjoy jetting this ? :D
+Guenounovitch Thanks :) not sure 'enjoy' is the right word, but when you finally get the jetting right and can ride it properly there's definitely a feeling of elation!!
+James De Vile ;)
+James De Vile I'll do the same job this week. Tell me if i'm wrong, i should look approx : 125-135 max 40-45 right ?
+Guenounovitch Depends entirely on your setup! With the above, mine ended up around 122 main, 40 idle and a JJK needle.
If you've time, read pages 10 and 11 here - it's my build thread from 2014:
vespasmallframeforum.proboards.com/thread/14057/complete-jimmys-polini-tourer-project?page=10
Thx ! i'm jealous, u're V90 is a beauty. good job ! :) All the best
Муравей мотороллер
Too rich xD She is choking
Salam mesin kanan
Abbassa i gettii
opok o knalpot e kok mlungker
Running way to rich
W.A RC yep. Was just a first run :)
Too
CÁI PÔ QUÁ RƯỜM RÀ ,,,, KHÔNG CÓ ĐỀ KHUYẾT ĐIỄM LỚN !
mix grassa
👍🏻👍🏻👍🏻
Bidone
🤷🏼♂️
Gira magra🤣🤣🤣
Âmnna xli ve i mọ lo
😵😵😢
too much oil in the gas man
If its a first run, you more oil when running an engine in
Poor racing
Fully throttle race ?
Too rich
Did you see the title of this video? ;)
What is it ! 👎
get some shoes on!!!!😂
Good