Good video. But be careful if running less than 4 ohms with only using only 4ga wire and I assume stock battery. That amp won't last long and needs more battery and larger wire.
Thanks for the advice man! I'm already thinking about another battery, but 0 gauge is def coming soon. Already did the big 3. Just gotta get some money together for wires
The smart 3 bass is 50mm exactly just dont fit over sized so i bought duel inputs from toolmaker specific to smart 3 and they work perfectly you could get the 4g to 1/0 input
@@loganduchon your gonna burn your shit down if your not careful, 4 guage wont handle 3k rms well. Doubt ur even gettin close to rated power on stock. That bass 3k has been seen to hit 7k in burps with rated power
@@jdmsolara6726 naw your wrong it can run 4 gauge because I did it for a year and nothing happened the amp is not that big because it’s bridged so I assume 4 gauge is just fine but yes 0 is better but if something is designed for something then your good but if he put 4 in a 0 then it would be a problem! And my sht was hitting!
Settings change depending on your subs and how much power your car can provide. I would suggest you watch a video on the right way to set an amp if you got any questions !!
Ive installed a rockford t2500 for a system with a T2S216. I like Rockford's products they are high quality and built like tanks, but gah damn they're expensive haha. Get what you pay for though. I have a t2s216 sitting in my basement waiting for another project or to sell at some point.
People make “shitty install videos” because not everyone drives a 97 accord. No one cares except the 7 people with a 94 accord who happen to install a taramps and want to hide the wire.
Haha for sure but wiring is damn near universal in this video. Not necessarily a wiring video specific to my car just wanted to give people an idea of what needs to be done to make it clean 👍🏽
@@matt6951 No 0 Guage inputs, loud fan, and the fan would make a clicking/scraping noise frequently. Not to mention that the crescendo is build like a tank compared to the taramps
You did not show the wiring whatsoever you just showed where you ran it through. It's like nobody knows Or wants to show how this is wired exactly. The taramp
![2021 Taramps Smart 3 BASS Amp Dyno and Full Review [4K]](http://i.ytimg.com/vi/y37leRxDJ8A/mqdefault.jpg)
![2021 Taramps Smart 3 BASS Amp Dyno and Full Review [4K]](/img/tr.png)
![Taramps Bass 3K 3000 watt Amp Dyno Test and Review [4K]](http://i.ytimg.com/vi/o2eun7NmV8k/mqdefault.jpg)
Love how you spliced the remote wire. I thought I was a rookie
Thank you for making this
U will blow that sub in 10 seconds
Lol it never did but i only messed with it for about 4 days
no way that kicker is going to hold up
Good video. But be careful if running less than 4 ohms with only using only 4ga wire and I assume stock battery. That amp won't last long and needs more battery and larger wire.
Thanks for the advice man! I'm already thinking about another battery, but 0 gauge is def coming soon. Already did the big 3. Just gotta get some money together for wires
What is best amplifier to run a chuchero loud
How many ohms did you have it running at btw fire vid 🔥
Which is better? The bass 3k or the smart 3k?
I havent had the smart 3k but ive heard its better
Great content✊
Much love appreciate you
Gotta make that money
What fuse did you run?
150A fuse
Hey my man you're going to need a much bigger electrical system and wiring to run that amp
Yeah for sure. Im not driving the car right now, but Im planning on upgrading electrical next summer
I got 2 of those on 2 re platinum 18s at half ohm each there nasty little amps
Well smart 3 bass
That sounds wild and i like the amps i just wish they had 0 guage inputs
The smart 3 bass is 50mm exactly just dont fit over sized so i bought duel inputs from toolmaker specific to smart 3 and they work perfectly you could get the 4g to 1/0 input
@@loganduchon bro get some 0g-4g reducers. That's what I'm using on the md3k
@@cheddarballs864 i wouldve but i switched amps
Whats the song with birdman on it.. lol that crazy ass shit slap..lol
Lol we cooked this one up not too long ago but its unreleased rn 🔥
is that wire 0 gage you are using?
No the bass 3k only has 4 guage inputs so thats what im running
@@loganduchon your gonna burn your shit down if your not careful, 4 guage wont handle 3k rms well. Doubt ur even gettin close to rated power on stock. That bass 3k has been seen to hit 7k in burps with rated power
@@jdmsolara6726 naw your wrong it can run 4 gauge because I did it for a year and nothing happened the amp is not that big because it’s bridged so I assume 4 gauge is just fine but yes 0 is better but if something is designed for something then your good but if he put 4 in a 0 then it would be a problem! And my sht was hitting!
u didn't show the settings on di amps
Settings change depending on your subs and how much power your car can provide. I would suggest you watch a video on the right way to set an amp if you got any questions !!
Where's the bass knob?
Doesnt come with one. Only comes with a clip meter
@@loganduchon i would have been nice to see how to run one though but all in all great video
yes rockford does come with it but you have to buy the amp for subwoofer sucka
Ive installed a rockford t2500 for a system with a T2S216. I like Rockford's products they are high quality and built like tanks, but gah damn they're expensive haha. Get what you pay for though. I have a t2s216 sitting in my basement waiting for another project or to sell at some point.
can i run this amp to two subs?
For sure you just gotta look into some wiring diagrams to figure out how to choose your ohms
@@loganduchon bruh i can’t wrap my head around ohms for some reason
@@bbonyt7 welcome to youtube university. just watch a video about wirings subs and ohms. Something like this ua-cam.com/video/mc4wmSRrs6E/v-deo.html
People make “shitty install videos” because not everyone drives a 97 accord. No one cares except the 7 people with a 94 accord who happen to install a taramps and want to hide the wire.
Haha for sure but wiring is damn near universal in this video. Not necessarily a wiring video specific to my car just wanted to give people an idea of what needs to be done to make it clean 👍🏽
@@loganduchon what subs you running now?
@@matt6951 Sundown X12 V2 on Crescendo Bass clef 4k
@@loganduchon why’d you get rid of the taramp?
@@matt6951 No 0 Guage inputs, loud fan, and the fan would make a clicking/scraping noise frequently. Not to mention that the crescendo is build like a tank compared to the taramps
Get a better alternator before a battery taramp uses 190 amps during music
3k on a kicker ?🤨😳
Short term kinda thing 🤷🏽♂️
Song credits
You did not show the wiring whatsoever you just showed where you ran it through. It's like nobody knows Or wants to show how this is wired exactly. The taramp
Ohio in here too
Even at 4 ohm that amps 1000 watts bye bye kicker
Worst boxing ive ever seen, not 1 piece of styrofoam?
10:14 😖
Creepy