I just got this sewing machine out (my husband had clutter all around it) in the office. I had no idea where to begin and now, after watching your very comprehensive tutorial I feel much more confident than I did 15 minutes ago! Thank you so very much!
Wonderful tutorial, I have the same machine about 8 years now and I just learn something about it from you, please continue with more tutorial please, thank you very much.
OMG Tiffany thank you so much I really enjoyed this video. I was gifted this machine 2 yrs ago and I been. I've been wanting to learn to embroider, you just boosted my confidence to get started. I subscribed for more videos again thanks. Happy Holidays to you. 🌲
I ran across this video on the machine I just purchased and yours was the easiest most simple understanding video I've ever seen! Thanks. Do you have one on setting the machine up for embroidery?
How do you decide what thread tension to use? My thread keeps bunching up. It looks ok on the top of the fabric, but the bottom is all crazy and the upper thread sometimes breaks. !
Very nicely explained. I have problems threading the needle. I have followed all steps and I still have the problem. Can't figure what am I doing wrong?
if you are having problems with the automatic threader it may be your sewing machine needle. Some types of needles have a smaller "eye hole" that the thread goes through and the automatic threader will not work for it. Follow all the steps to the end when it cuts the thread and then you will have to put the thread in the eye hole by hand. Hope this helps 😁
I pattern and sew every cosplay that I make using this sewing machine. 😊 Its only recently that Iv starting doing sewing tutorials for them and there is a denim jacket, denim skirt and an anime robe tutorial coming in the next few months.
Could be a few things. 1. the sewing machine needle "eye hole" may be to small for the pre threader to work with and for this you will have to thread it by hand 2. the thread you are using is too thick for the "eye hole" to go through and you may need to change needles 3. the position of you sewing machine needle may be off, turn the knob on the right to make sure it is in the lowest setting or turn the machine off and on again for it to reset in the correct place
I just got this sewing machine out (my husband had clutter all around it) in the office. I had no idea where to begin and now, after watching your very comprehensive tutorial I feel much more confident than I did 15 minutes ago! Thank you so very much!
So glad you found my video helpful! Best of luck on all your new sewing crafts to come =]
This is the most comprehensive, clearest, and most helpful tutorial I think I've ever seen. Thank you so much!
Thanks! I'm glad I was able to help 😁
Wonderful tutorial, I have the same machine about 8 years now and I just learn something about it from you, please continue with more tutorial please, thank you very much.
Thanks, will do!
This video is a perfect tutorial, thank you for explaining and showing it so thoroughly.
Glad it was helpful!
Yay! I'm so happy to see you making sewing tutorials 😄 Excellent job!
Thank you! 😊
I don’t know if y’all know there is and se400/425 Facebook Page, that is awesome. My Granddaughter and I have learned so much from this page.
Whats its name?
Thanks I needed a refresher coarse on the basics.
Glad to help and happy sewing 😁
OMG Tiffany thank you so much I really enjoyed this video. I was gifted this machine 2 yrs ago and I been. I've been wanting to learn to embroider, you just boosted my confidence to get started. I subscribed for more videos again thanks. Happy Holidays to you. 🌲
Welcome to the community and happy holidays to you and your family!
This was so amazing concise ! I needed this!
Glad to help 😊
Thank you so much for making this video
It's my pleasure
Excellent 👍
thank you for the video, Tiffany☺️♥️
You are so welcome!
Thank you awesome thorough video 😊
Glad you enjoyed it!
Thanks very easy to follow you
glad you found it helpful!
Just got this machine from my Mother...looking forward to more tutorial videos
Happy sewing!
Thank you so much!
Glad you liked it!
I ran across this video on the machine I just purchased and yours was the easiest most simple understanding video I've ever seen! Thanks. Do you have one on setting the machine up for embroidery?
ty and glad you found this helpful! I unfortunately do not have a vod for the embroidery yet.
How do you decide what thread tension to use? My thread keeps bunching up. It looks ok on the top of the fabric, but the bottom is all crazy and the upper thread sometimes breaks.
!
Hi, watched the basic video. Great job with that, it was very helpful. Can you please explain how to set the needle in a different position.
Great suggestion! Ill add it to my list 😁
good job
Thanks!
Very nicely explained. I have problems threading the needle. I have followed all steps and I still have the problem. Can't figure what am I doing wrong?
if you are having problems with the automatic threader it may be your sewing machine needle. Some types of needles have a smaller "eye hole" that the thread goes through and the automatic threader will not work for it. Follow all the steps to the end when it cuts the thread and then you will have to put the thread in the eye hole by hand. Hope this helps 😁
Like video very nice
Thank you very much!
@@TiffanyGordonCosplay your are mast wlc 🙏❣️
Is there anyway you can tell me how to adjust the stitch length
Can you provide more se 400 sewing ideas? What do you sew?
I pattern and sew every cosplay that I make using this sewing machine. 😊 Its only recently that Iv starting doing sewing tutorials for them and there is a denim jacket, denim skirt and an anime robe tutorial coming in the next few months.
Hi Tiffany can you tell me the types of needle I can purchase in the store please thank you
Olá tudo bem? Ela tem entrada para pan drive ?
Trying to find this machine for sale is hard
What computer do you use
Im having an issue on step 9 the thread does not go through the sewing needle. Any advice. thankyou
Could be a few things.
1. the sewing machine needle "eye hole" may be to small for the pre threader to work with and for this you will have to thread it by hand
2. the thread you are using is too thick for the "eye hole" to go through and you may need to change needles
3. the position of you sewing machine needle may be off, turn the knob on the right to make sure it is in the lowest setting or turn the machine off and on again for it to reset in the correct place
How do you get this to make a simple zig zag stitch I can not seam to find which one to use
#7 is a basic zigzag stitch
Is there still a Brother SE-400?
Amazon and Walmart still have them so id say yes!
Does it work for leather
I use it on leather all the time. You will need specific sewing machine needles for leather and there are thickness limitations for leather as well.
TIL the cylinder thingy is called a bobbin.
🙂
You didn't show how to do a backup to lock the thread in place and then move forward. .
Just watched the video to see how beautiful you are 😗
you're loading the thread spool the wrong way...just sayin'