I have the luxury of space, so I found a beefy kitchen / dining table at a thrift, added sofa feet to the legs to raise it from 30” to 36”. It’s phenomenal! Am so happy. 30” is standard table height but not great for work tables. 36” is standard kitchen counter height and recommended for cutting tables. So y’all know.
I was struggling with a surface to iron on and to cut fabric on. Dining room table was killing my back. My husband found a baby changing table that is a better height. I am refurbishing it and will add a ply wood surface. I will create a pressing station. I will also be able to use a large cutting mat on it has a draw and shelves. Fingers crossed
Loved your video. My grandfather had made a desk for his daughter, my aunt Claudia, back in the mid 1950s. He had no pattern just made a desk. Later my aunt gave it to my mom to use for typing on. Then over time my dad and I refinished the desk and put a piece of glass on top to protect it. I use it for sewing on. And because my grandfather made it so sturdy, it never moves when I’m sewing there. I love the history and even the picture carved on the wood in the drawer with a baseball ad on it. I will be following you now. Thanks.
I use an adjustable standing table for a cutting table, It's useful as I can adjust it for my and my daughters comfort. The table serves multiply purposes, so being able to have it different heights is super useful.
Me too! I all the time change the height, because sometimes I am designing on paper, sometimes I use the sewing machine, sometimes the overlock. Sometimes I stand (designing and cutting great to have the freedom to move), sometimes I sit (more stability for my hand during sewing). I love to be able to adjust the height.
During an outdoor biology lesson with a dissection, we were using long plastic folding tables. One mom pulled out some paint cans to boost the height of the table by placing one under each leg. That was so helpful for the assistant adults.
Is the desk a large size or is it able to fold out bigger? Do you have the room for fabric & patterns cutting without any of the pattern or fabric falling of the table? I'm going to be moving near end of the year and it's in a bigger 1 bed flat and the kitchen is joined to lounge just a 2/3rds 3ft half wall and I am trying to find out what would be the best table to use for cutting out & sewing & also with option to use for meal preparation, I have no idea how. Any idea I'd appreciate ur thoughts 😊
My desk is a fixed size, but there are different widths of tables out there, along with differing price points. What about an adjustable table that pulls out on one end, you then insert the leaves of the table in to increase the surface size, take the leaves out when you need it smaller, push it back together . Some can be sideboard size that extends to seat 8. Or maybe a drop leaf table where one side can fold down when not in use?
The hardware store has metal braces you can glue or nail to the base of the desk to strengthen it. Also be sure all the IKEA fasteners are as tight as possible. Sometimes they work loose. I actually used some wood glue in the holes of a bookcase from them that was wobbly before putting the fasteners back in.
2:23 I also did this! The PVC pipe should be a diameter that will fit the table leg inside. There are also end caps that I added a non skid product to (IE the type used under rugs). A friend that sews w me is several inches taller and we switch out for longer extensions for her. The next task will be to add wheels!
for a table i would suggest looking for a vintage table. it's true they don't make them like they use to and old furniture is more solid than anything today. i'm always on the hunt for antique when it comes to sewing tools and equipment.
I agree. People are always selling solid oak tables for very little second hand - often in immaculate condition - we bought our modern, but very heavy, American oak table plus 4 chairs (we have extra from another set and can have 8 place settings if needed) for £150 (plus the cost of two strong men and transportation to remove it to our home - less than £200 in total at the time) from a couple who were moving and just didn't want the hassle of taking it with them. I'd spent hours looking for a dining set and just gasped at the cost, especially if they weren't good quality and solid wood. If it's too wide for the space, get a carpenter to cut it to the depth required and re-site the legs. You could make one table into two lengths by cutting it right down the centre of the length, spanning two walls by using substitute legs at the back, where you really won't see them. Ideally, if space allows, leave it as it is and even better if it comes with one or more extension leaves to give more cutting space when required.
I never wanted to put my threads on a wall because of dust - I live in the dusty desert. Thank you for sharing your solutions that keep the thread dust-free!
We just moved to a much smaller living space, and I was at a loss as to how I would handle my sewing supplies. Right now, they are all in storage. You have given me some very good ideas as to how to work with this limited space for my sewing supplies. Thanks so much!
My sewing table is an 8 foot long butcher block countertop that is mounted to the wall with very heavy brackets and a space at the back for the cords to slip through. It holds both the sewing machine and the serger with room to spare.😂😂❤❤❤❤❤
Such a great idea to use a small table tennis table or ping pong table, as we call it in the USA. Thank you for the ideas. A couple of tips I have for using the rotary cutter, always cut away from you- never towards you. If it slips, you can harm yourself. Always locked the blade as soon as you stop cutting.
I saw an IKEA video and a sewer recommended an adjustable standing desk as a cutting table. For my sewing table I use a wood designated sewing table I inherited. Very sturdy. I have the cart as well. Loved your ideas
I love seeing how people organize their things! I bought a folding cardboard cutting board back in the early 60s when I was in high school! I have mostly used it on a bed although I have used it on my actual cutting table. The problem is that the table is too high for me - and as one of those terrible shrinking women and I'm now only 5' tall so it's back to the bed. I bought a newer cutting board in the 90s but gave it to one of my girls since the old one was better! I have used electric scissors since back in the 60s - have worn out several. I have collagen problems and my hands hurt when cutting heavy fabrics, and the old corded ones are light and work well! I LOVE you light! My machine has wonderful light but more would be better! I do use white light LED bulbs wherever I can but that moveable arm would be wonderful!
For a sturdy table I purchased the adjustable Husky Table from Home Depot. It's industrial so it is very sturdy. I bought one with drawers and one without and added wheels. They have worked out perfectly.
I just came in here to make the same recommendation! Home supply stores carry so many items that are useful for sewers. Bright work lights and heavy duty work tables being the main ones. They have higher work tables as well. You could outfit a sewing room using mostly Home Depot/Lowe’s supplies and it would be cheaper and higher quality than anything from a sewing store. ❤
I bought the trestle legs called Mittback ($60 each) from IKEA, along with a desk top. The trestle legs are maple wood and adjust up to 36”. This is a much more comfortable height than a ping png table if you have back issues. But they aren’t wide. If I had the space, I would get another set for a fabulous pattern making/cutting table.
Thank you so much for your wonderful review! I struggle with organization; dust and a cramped space are my main issues. This analysis is incredibly helpful! Have a wonderful weekend!
I am so intrigued that you appear to have been embroidering with wool 😮 I haven’t been brave enough to use anything other than standard embroidery thread yet. I’d love to see a video on how you do it.
Thank you so much for this video! I have a similarly small area for sewing and have been struggling with how to optimize my space 😅 I've been looking at the thread walls especially and thank you for your realistic comparison of how they work functionally with the drawers. I hope you don't mind me sharing in return :) I noticed in the small clip where you are using the rotary cutter that you are left-handed and that you were pulling the rotary cutter towards you. I've been using the rotary cutter for a few years now and have several left-handed friends. Here are some tips we've learned :) there are left-handed or ambidextrous style cutters that allow for the blade to be placed on either side of the handle. This can make cutting along a pattern edge easier if the blade is toward the inner side of your hand and wrist instead of the outer side. Also, pushing the blade away from you to cut is usually easier and a more comfortable motion. It also is usually easier to control the blade that way. And a template tip - the template can move from pushing the cutter against the edge while cutting - it helps to anchor the farthest points of the pattern with weights so you don't have to move your hand on the template while you are cutting. And always use sharp blades so you don't have to retrace your cut! I hope this helps! I look forward to more of your videos 🥰
You can get shock absorbing pads for your table legs. I use them under my industrial embroidery machine. I needed them when I decided to run my business from home. It helps with vibration, sound and stability.
I absolutely love my ironing board ❤ However, its a bit old fashioned. You see, its one of those wooden ironing boards that were used before they created the metal ones. Sure its heavy and bulky but it never fails me! As for a cutting table i have a folding table with legs that telescope up and down. I can use it standing up or if i need to sit i can lower it down. Most of my threads are kept in a drawer or a clear plastic container. My all cotton threads are kept in a special box separate from the other threads, i don't want them fighting with each other 😂🤣 Thank you for your video. Your ironing table is a fantastic idea! I have something similar that I could use. It even has a plug attached to it as well as wheels ❤.
Hi! Thanks for the video, very useful! As for the table - did you check whether it's leveled? If your floor is not perfectly leveled, it may cause such effect. For example, I have bought a closet and I thought that the construction is weak and it's shaking, but once we figured out that we need to place a 0.5-1cm adjustment under certain legs of the closet - it's now standing still, never shaking.
For the ironing board rust issue you can put a towel down as a temporary solution, and later when you get a chance spray paint with a rust proof paint.
Thank you for these tips! I struggle with the short iron cord; now when it is on a cart, you can iron the full width of the fabric. I have a small sewing space too, got myself Ikea table with trestles, so I can incline it for drawing and adjust the height for cutting/sewing.
Thank you for your videos. I enjoy watching them. They inspire me in working in my small space as I don’t have a dedicated area to sew. I too wish I could afford a vacuum/fan ironing board. I have had my Polder blunt nose board for 15 years now and it’s as good as the day I bought it. They don’t make my exact model anymore, it has wheels, but they do sell similar models in the USA. I have used two Rowenta steam irons and currently use a LauraStar Lift Extra on it. For your bed risers, if you know a wood craftsman they could make you some out of a post. They can customize the height and then core drill a hole to recess the table legs to give it stability. I have a Husky adjustable workbench from Home Depot that my Stellaire sits on. At top speed my Stellaire does not make it wobble. But I also put a silicone mat underneath it. It also serves as my work from home computer desk & scan n cut table. It’s long enough that I also can put a wool mat next to my Stellaire and iron my in the hoop projects. For rotary cutting, I found that using ruler grips helped me the most. I also weight down my longer rulers with canned goods to help me cut more accurately.
I’ve looked at Husky adjustable workbench and it looks exactly like a solution I’d like to have in my space! Looks very sturdy, but nice at the same time👍
Some really great tips. Thank you. I had a good chuckle about the thread boxes you mentioned. Years ago, when my son was little, he collected Matchbox cars and they sold a carrying case for those. They’re identical to those cases. In fact, I suspect the sewing people got their idea from those. Problem is, that when a specialized hobby, such as sewing, takes an idea, the price skyrockets. I have all my sons old cases and have been using for storing so many different craft supplies. Besides sewing and machine embroidery I am also a card maker so use some of those cases for crafts supplies as well. Most of the furniture in my sewing/craft room is from IKEA. They are masters in creating pieces for all sized spaces, and the quality is excellent and very versatile. ❤My cutting tables is made from 6 Alex low cabinets and we put a large piece of Masonite on top that makes the table 8ft x6ft. I have one of the full sized cutting mats on top of that. I realize that I am very fortunate to have a dedicated room for all my crafty activities. When we moved to this house 22 years ago, from a much smaller house we made sure that there would be a “spare” bedroom for a sewing room. 😉. Thanks again for sharing your ideas and experiences. ❤️
I use ikea alex drawers with an ikea table/ desk top on it for my big embroidery/sewing machine. Because the alex drawers are more than a simple table leg , this combo makes for a very stable sewing cabinet which also gives me needed drawer space. I love it so much that I plan to purchase another combo unit for my other sewing machine. The desk too comes in different lengths to suit my needs as well. Way more cost effective than a cabinet made specifically for a sewing machine
Fully agree with storing things in drawers. I think you did not mention that if something is stored on the wall, the color can change due to the sunlight, so also for that purpose it is better to store everything in a closed cabinet. I also store all of my textiles protected from sunlight, otherwise when I want to use them, I might end with faded colors on the fold line. The rotary cutter I love from the first moment. I do not think it is really a deep learning curve. You just have to be careful, because a good one is extremely sharp and also cuts the skin very well. :-)))
I got a vacuum/heated ironing table - found it second hand but in perfect condition Best thing ever No residue wetness Holds fabric in place Plus many other good features I’m so glad if it and Love it
I bought an antique oak folding tea trolley for less than £20 at auction. Nobody loves these older pieces of furniture anymore. I put a thick wool/felt pad on it so it's safe for ironing. It's also the perfect height for my sewing machine. Being on wheels I can move it around easily but it doesn't move unless it gets a good push
I found a great sewing table from the building center. It is a HUSKY brand workbench table which is adjustable height with a wood top and several shallow wide drawers for tools, thread, rulers, etc. There are multiple size and color choices, and it was not too expensive, under 200 USD. Very sturdy for my combination sewing/embroidery machine which is very heavy.
I too use a Husky work table that I bought from Home Depot. Mine is the model without the drawers, but it has locking casters on the bottom to roll easily and a hand crank to raise or lower the height. I love this table! I also have an adjustable light similar to the one shown, and it works quite well. I am debating whether to purchase a full ironing board or to attach a mini one to a rolling cart as I have seen on Pinterest.
I hated my ironing board-uses up too much floor/storage space. I bought a used but sturdy dresser that was about the right height to iron on & made a separate ironing top-MDF cut to 60" wide × 22" deep, covered in a couple layers of 100% cotton batting with ironing board fabric on top. Stapled all that to the board's underside & added lengths of square dowels to bring it up to the perfect height.
I still have the ironing table my mum gave me with the plywood board, after forty years ! A few years ago , I was considering getting a new one because the legs were scratched and shabby....I gave up quickly when I saw all the poor wobbly light metal things in the stores, even the priciest!I love my wood ironing table board so much.....I understand perfectly your feelings about the new one!May be you can get a plywood board to adapt on its legs in place of the cursed one?
I have a friend that has the same Ironing board with a piece of ply wood added and wrapped in batting and a ironing cloth. it is larger than the metal board it is great. There is a good table at Home depot and it raises and lowers with a crank. I use it with my Babylock.
I had a thread rack but live in a dusty desert so I gave it away. I now store all my thread in plastic bins by type of thread. I still use a sturdy ironing board that I have had for 53 years. It folds and is all metal and sturdy. I also have a small ironing table pad. My room is big enough for 3 different sturdy office type tables. One is height adjustable for my machine. I like that if I move, I can use whatever arrangement I need .
For now, we are still in the home in which our kids grew through their teen years, and I have my daughter's old bedroom for my sewing room; it's quite spacious. Crawling around on the floor cutting fabric is a no-no for me, too, due to both back AND knee problems, so I got a sewing table from that online giant. It was less than $200 USD, but I use it A LOT! When family came for Christmas 2 years ago, I was able to fold it halfway and roll it into our bedroom. Daughter and her hubby and child slept in her room, and she helped me wrap presents on the half sewing table. The table got mixed reviews on the online website, but I got lucky and mine has worked out great. I hope other sewists are able to find good solutions for their sewing needs.
Thank you for sharing your experience. I'm going to be looking for a light like yours over here in the UK. It seems ideal for most any kind of close work. Have you considered an Ikea kitchen island for a sewing (AND cutting) table? They are very solid and stable, and there is plenty of storage with either the Tornviken or Vadholma models. Only a suggestion.
I just purchased the Gidget 2 table it’s sturdy and does not vibrate. In addition they make an insert for the machine type that you have. The table also fold up and has wheels to roll away. I’m very satisfied with it.
Anti vibration mats from madam sew is a good mat for the sewing machine. At home I have a wooden desk but in my winter home I have a card table and the mat removes the vibration.
For lighting I use the Husky 2200-Lumen Tripod. It's LED, lightweight and charges plugged in, but will work for hours unplugged. It's easy to move around to different stations (it stands on the floor) and the trio of lights can be pointed in different directions. The US dollar price is under $50.
I just bought a reversible ironing board cover that is cotton on one side and felted wool on the other. If nothing else, the wool/cotton should take up some of the moisture before drips form. Another simple solution is to insert two layers of cotton lining, basically a folded sheet, under your ironing board cover. I remember ironing boards from my childhood where my grandmother had laid a cotton quilt remnant under the cover for a smooth lining and to prevent any rust leaching thru to the clothes.
O enjoy your videos! As for bed risers, try short pieces of 2” PVC pipe. My friend runs a bolt through the pipe sides that actually keep the table legs from resting on the plastic pipe completely., since they rest on the bolt.
(Linda) Hi Julija, omg love your video. Yes, I too have a few things I changed and here are mine. First is I don't have space for an ironing board, so I bought on Amazon the OIiso MultiMat 100% New Zealand Wool that are 36cmx36cm (14.5"x14.5) and about 1" think 2.5 cm. It really retains the heat and with your iron or mine (not as high end but entry level) it REALLY does an amazing job!!! OMG, I bought six and they have these silicone orange joiners they are marvellous. N.B.: I put my joined Oliso wool mats on top of my big green cutting mat to iron my fabric but while it did not burn the mat (2.5 cm thick wool mats) but it was very hot, the intense heat of my Sapporo warped my green self-healing mat. So do it elsewhere. (ALSO NOTE THAT SINCE THEY COME FROM SHEEP, they do have that smell, but i don't mind. In time it should fade). So I Highly recommend the Oliso Wool mats that you could put on top of your ironing board, and maybe to cut them to match its design( Or buy a less expensive rectangular ironing board, where you could line up the Oliso mats. I have an entry level iron where the water bottle is hung 3 meters above my table (put a hook in the ceiling) and not a boiler like yours, which was more expensive so opted for the hanging bottle which works wonders!!! THE BEST decision i ever made! And as for a sewing table, i have yet to buy one. I have serious back issues and i was looking into buy one of those electric desk tables that you can chose your height and most have 3 memory programs-since the base legs are in a "H" form i think it would be more steady. Also most of these desks have a thin large thin drawer where i could put all my small marking tools. So look into these types of desks. I am really leaning toward one though i have new clue about how it would handle the vibration of the sewing machine---BUT, since i have a bad back, I would still opt for it and find a way to anchor a few nicely fabric wrapped bricks 😂 on the bottom part of the H ....I know but in my case HEY WHATEVER IT TAKES TO HELP MY BACK. Ohh just a note, the spring that is attached to the sole plate for the iron, I have put the spring "behind" the iron so that way it pushes the iron forward into the sole plate. It's better than on top like you have it now. Thank you for all your videos, i follow your work and hope for a new video every Saturday morning while having my coffee!☕😊
Thank you for such insightful comment!🤗 As for the spring on the iron shoe - it was such a challenge to put this one on and it came with no instructions, so I’m not fully sure it’s correctly placed😅😁
@@Julija_Gobereyes right now your spring is almost in the way of your hand when holding your iron; just bring the spring down behind the iron so it pushes it forward into the pointy part of the shoe. It will be more comfortable like that. It’s the same principle as a woman’s shoe with open heel. Usually you have a thin strap behind with an elastic so it pushes your foot in to keep it on😊. ❤
Fabulous information, I particularly like the sewing station idea. I have a trolley I can use. I thing my Olisio iron, hams and Mary Ellen’s best press will fit on the top shelf, the next shelf I’m going to employ your idea of the accessories box of the things I use on my cutting table and the lowest level can house my label maker, bias binding machine and my Bernina stitch regulator- that I can never find when I need it. Thank you again for sharing these fabulous commonsense tips. 🌹❤️
Your sewing talents are amazing and you manage everything in a small space! I've always thought thread walls gather dust, and eventually exposure to light could be a problem. You are solving every issue, including a temporary cutting table. I've never seen a rusty ironing table in the US. Keep looking for a good one. Thanks for sharing and showing beautiful finished projects!
I brought an old fashioned second hand gate leg table, cost 20 pounds, can put one leaf up or two depending on my requirements, it is solid wood, has a cupboard at each end plus a drawer at each end. I attached castors to each leg so can move it around easily and it makes it higher. Once done I can fold the leaves down and it is about 1 metre long and 30cm wide, it's brilliant
My sewing table is an electric, standing desk. As it’s designed for computer and computer monitors, it takes up to 150 kilo weight, it’s very stable and is height adjustable for the sewing decks of my machine and overlocker/serger. This is not a cheap solution - but it is so worth it. I am about to take delivery of a second electric height adjustable standing desk 180cm x 90cm, which I will cover with the same size cutting mat. This will become my cutting and pattern preparation table. Regarding getting used to using a rotary cutter, I found when I started to make my own bras that I worked best with a smaller rotary cutter. For me the perfect size was a 28mm rotary cutter for cutting garments - it’s much easier to negotiate necklines, armholes and other similar curves. I now do not use my 40mm rotary cutter at all and I am looking to donate this item. The rest of my sewing furniture is mostly IKEA and inexpensive storage solutions. I have finally found what works for me!
I’ll look into electric adjustable height tables - I agree, they are not cheap, but this is an item I use daily, so a comfortable solution would be worth investing👍
I think I'll buy an electric standing desk as well for my sewing/cutting table! I was wondering though whether it would be stable enough with the vibration of the sewing machine, considering most of these tables have only 2 legs. May I ask which model you took, and whether the stability is good for sewing? Thank you!
@@CerseiDM I have two electric height adjustable desks. My first one (approximately 3/4 years ago) is for my sewing machine & overlocker which I purchased online from Zen Desks, which subsequently folded during COVID. It is 1500 x 750mm. I would have preferred 1800mm but this, at the time did not fit my space. My second purchase is from DESKY, again online which is purely for pattern work & cutting fabric. This I also purchased online and the desk was custom made for to be 1800 x 900 mm. I topped this with a cutting mat of the same size from J K Trading, again an online purchase and the mat is packaged flat. I deliberately chose these dimensions as 150 cm fabric folded is 90cm. DESKY Shipping was $35.00 which amazed me. The custom width cost I can’t remember but it was negligible, I think an extra $30.00. DESKY supply all tools, with the exception of a screw driver to assemble the desk. They have clear UA-cam videos on how to assemble. The desks are designed to hold 140kgs and are exceptionally stable, do not vibrate or shake in any way. Remember they are designed to hold computers, monitors and additional paraphernalia. That said, regardless of the surface I have my machines on, I do place a piece of foam under them. Find it best to get the dual motor powered desks - one motor for each leg. If you are getting a desk for your machines do purchase the power cable management tray. It makes a difference. Consider adding a drawer. I made a mistake with getting the slimline drawer and I don’t advise this option - it’s only 3.5cm deep. Good luck 🤞
I don’t use a table for sewing, instead I placed kitchen counters along the two walls in my sewing room, one is the perfect height for me sitting the other is at standing height as my preference sometimes is to stand while sewing. It has been a great solution for me.
I use an old sturdy bedroom vanity desk as my sewing desk. It's great whether I'm using my overlock, or sewing/ embroidery machine. And yes, rolling carts are so great for organizing and mobilizing necessities that I don't keep in the vanity drawers.
Brabanti not only makes good ironing boards, but COVERS--after I bought a mini boiler steam iron, I got their cover designed for these types of irons, and the extra layers/materials that prevents the condensation issue you describe!
Agreed. I have had one of their extra wide ironing boards for more than 15 years and it still works perfectly. I ordered a new cover about 2 years ago. My husband made me a rectangular wooden top to sit on top of the ironing board which I covered with 4 layers of cotton batting and a layer of fabric. Now I can iron the entire width of fabric when I am quilting. 😊
@@karenneiman856 oh, the extra board cover sounds great! I do hate flipping yardage around that needs to be ironed after washing before cutting due to the pointy end/wider than the board is long! I've had my board for over 20 years & on my third cover--hard to find the extra wide replacement cover over the years, but hooray for growth of the internet & international shipping! Got this special one from Brabanti's own site & shipping from Italy to US was worth it! (Other styles of their covers sold by other retailers, too).
I stabilized my table by having a bracket installed to anchor it to the wall. Bed risers are on Amazon or mattress store as they were originally made for beds.
My sewing cabinet comes from the thrift store. I didn’t install the sewing machine to fit in. I just put a thick chopping block over the hole. It pretty much stays put. Once in a blue moon I have to adjust it. Cutting table and altering table is table from Walmart. Is height adjustable so I just got it where I was comfortable doing things. If I need to sit because of my age and back my chair is very easy to raise & lower. A lot of my organizing things came from the dollar tree and harbor freight. I sometimes use my cutting table to iron large pieces of fabric. I had a friend who managed to find a table with fold down legs . She attached wheels to bottom of table. She could easily roll it under her bed and out when needed.
I was going to mention both the wool ironing mats and painting your ironing board with a rust inhibiting paint like rustoleum. But others already done this. Instead I am going to tell you how lovely your turtle neck dress looks on you. The green colour against your beautiful, coppery red hair is stunning and makes your deep blue eyes pop. Sorry if this seems OTT (over the top) but I am a red hair fanatic 😅 who cannot help herself!
My ironing board has a solid metal top which is much more stable than the mesh top boards. The mesh tends to flex and you get the water drip problems as Julie describes. My board was a wedding present in 1977 and is still going strong!
If you can't get the bed leg raisers, you could try using pvc pipe pieces to raise the table for you. When doing craft fairs, I have seen many vendors use this technique. If the legs are straight, you will need to put a piece of doweling or other item to block the table leg from going all the way down.
I made a TV tray with an ironing pad from Amazon over that for small projects. Which I put on pinterest. I used an old door and padded that with white muslin on top for a big ironing board and also use it over 2 waist hi book shelves. The book shelves i got from Amazon they have 3 shelves. The shelves i use for storage sewing boxes. The old door is on top as a table/ironing board. I use the cutting mat over the padded but not to thick, board to cut fabrics. Thank you for sub the wallboard for threads are not utilized enough for space. I thought dance way wow an easy way to stir thread but it is costly and I prefer the drawer or storage drawers on wheels. Good tips.
Find yourself a vintage desk, perhaps one of the steel ones. They DON'T MOVE in any way, and they have storage too. Mine (which is heavy particle board with formica surface) has a hole cut in the surface into which I've set my machine (we put a shelf underneath at the right height). I also altered the desk by removing one set of drawers for a wider leg area. It's perfect for my space, if a bit odd looking. Not expensive at all, under $25.
Thank you! This was really helpful! I have a question since I’m a beginner but I know how to sew a lot of things, what does frontline in body measurements mean? I’ve searched everywhere and can’t find it! Thanks again!!
I took a sewing class a few years ago and they uses long white folding tables to setup the sewing stations. They also needed to add an extra pressing (Ironing) station so they used the same white tables and used PVC plastic drain pipe to make extensions for the leg to make them high enough.
Make your own ironing board from real ply wood. Make it the length of the fabric you most use and the width of your choosing . Easy to store. I made the strand from the modesty panel from my sewing table. (Original maple IKEA) and screw on legs. I have had mine for more than 10 years and no warping. I cover it with muslin, padded it with wool quilt batting, and wash it or toss it when it gets too used.
Although ive sewn for year ive just got my own sewing space .Space is so i'm using a cumputer desk for my sewing table . and have hust bought a small Diy organiser for all my small notions
Hi, In case you haven't found those risers for your cutting table, I suggest that you try the medical supply shop where you live. Even if you live with socialised health and medical benefits that are usually independent shops too. If all else fails there might be on online in your country. The kind of shop I've seen sells things like walking sticks and joint stabilisers (don't ask me how I know), sometimes you find them selling Tempur Pedic products and compression bandages and stockings. If/when I need risers in the future, if they don't have them on Amazon I'm heading to our local medical supply shop. It's been around for more than my generation even with our socialised medical services. Yours, Ann
You could sew a removable cover for your thread wall in the closet. A roll-up version with snaps would allow you to hold up the cover on a day that you'll be needing to add or remove threads for awhile.
They make iron board covers that have a little padding and a reflective material that reflects heat back up. I think they are also waterproof, meaning that the steam wouldn't penetrate but rather be redirected upward. One of those will solve your issues with your ironing board.
Choosing thread walls or racks, etc for the aesthetic is entirely fair and reasonable for those who do it, but I fully agree it's anything but practical. I'm lucky to have been able to place my machine by a big window for natural light, but it means a convenient thread rack would also get a ton of light, which would unnecessarily degrade thread I haven't even used yet, so not my choice either.
The other problem with a cheap ironing board is there isn’t enough padding. Mine has thick cotton batting over the painted metal screen top, plus a thick cotton cover. I don’t get any of the dripping issues. (My ironing board is a wider model which I really like)
I bought a Flexispot E7 sit stand desk base and reused an Ikea table top. It seems like an expensive solution but I wanted a strong base that would go low enough for my serger, raise up for my sewing machine and then go high enough for cutting out. It is rock solid when using the embroidery machine. I chose the E7 because it goes from 58-123cm in height and can adjust in length from 120-200cm long and 60-80cm wide for the table top. A lot of the cheap sit stand desks start at 70cm which is too high for my serger and sewing machine and also limit you to specific table top sizes. If you choose another base make sure that the cross bar is in the middle, some of the other models have it set back to give more room for your legs, but this can make the table top bend down slightly under the weight of your machine (poor buy from Ikea). My embroidery machine in particular needs the table to be level. Whatever table base you buy I have found that the Flexispot wheels ( they call them castors) will screw into the base of most table legs, including tables from Ikea. These tables take a much shorter screw length than is available on most screw in wheels from Amazon. If you use the wheels you definitely need a desk base that goes down as low as 60cm from the floor as they add around 10cm of height. I put a cheap magnetic white board on top of the table under my cutting mats so that I can use magnets to hold down my patterns. I use the skittle shaped whiteboard magnets as they are easy to pick up. Somtimes I sew standing up, it is great to have the option. I agree with you about thread storage, drawers or boxes are the way to go. If you have enough thread for a stand you will not be using all of it regularly enough to stop the build up of dust. I have seen some sewing rooms where they have put a plastic dust sheet over their thread, so that might be worth trying.
@12:35 Rotary Cutter safety first! Motion away from you so the blade stroke is also AWAY from you. Watch hand position also. It's also easier to get more accurate cutting. Just be safe.
A safety tip for rotary cutting…it appears you are running the cutter toward you but you really should push it away from you. This is the recommended method of use, it is much safer and will be more easily controlled.
Bed risers show up regularly in thrift stores (charity shops) where I live in the U.S. I also was surprised to find them for sale recently in the hardware area of a big-box home improvement store.
If you are looking fir bed risers try looking in a store that caters to handicapped people. They often require the risers so that health care people have the beds higher. In Canada I got the ones for my husbands bed at a medical supply company.
If you cannot find bed raisers for raising your table, try some flower pots turned upside down. A friend of mine used flower pots to raise her dining table to a better height for cutting fabric back before bed raisers were made.
I have the luxury of space, so I found a beefy kitchen / dining table at a thrift, added sofa feet to the legs to raise it from 30” to 36”. It’s phenomenal! Am so happy. 30” is standard table height but not great for work tables. 36” is standard kitchen counter height and recommended for cutting tables. So y’all know.
I did the same.
Except if you are short! I love my 30 inch cutting table
I was struggling with a surface to iron on and to cut fabric on. Dining room table was killing my back. My husband found a baby changing table that is a better height. I am refurbishing it and will add a ply wood surface. I will create a pressing station. I will also be able to use a large cutting mat on it has a draw and shelves. Fingers crossed
Loved your video. My grandfather had made a desk for his daughter, my aunt Claudia, back in the mid 1950s. He had no pattern just made a desk. Later my aunt gave it to my mom to use for typing on. Then over time my dad and I refinished the desk and put a piece of glass on top to protect it. I use it for sewing on. And because my grandfather made it so sturdy, it never moves when I’m sewing there. I love the history and even the picture carved on the wood in the drawer with a baseball ad on it. I will be following you now. Thanks.
I use an adjustable standing table for a cutting table, It's useful as I can adjust it for my and my daughters comfort. The table serves multiply purposes, so being able to have it different heights is super useful.
Me too! I all the time change the height, because sometimes I am designing on paper, sometimes I use the sewing machine, sometimes the overlock. Sometimes I stand (designing and cutting great to have the freedom to move), sometimes I sit (more stability for my hand during sewing). I love to be able to adjust the height.
During an outdoor biology lesson with a dissection, we were using long plastic folding tables. One mom pulled out some paint cans to boost the height of the table by placing one under each leg. That was so helpful for the assistant adults.
Me too!
Is the desk a large size or is it able to fold out bigger? Do you have the room for fabric & patterns cutting without any of the pattern or fabric falling of the table?
I'm going to be moving near end of the year and it's in a bigger 1 bed flat and the kitchen is joined to lounge just a 2/3rds 3ft half wall and I am trying to find out what would be the best table to use for cutting out & sewing & also with option to use for meal preparation, I have no idea how. Any idea I'd appreciate ur thoughts 😊
My desk is a fixed size, but there are different widths of tables out there, along with differing price points. What about an adjustable table that pulls out on one end, you then insert the leaves of the table in to increase the surface size, take the leaves out when you need it smaller, push it back together . Some can be sideboard size that extends to seat 8. Or maybe a drop leaf table where one side can fold down when not in use?
Thank you! I have an antique wooden ironing board, it doesn’t fall over in use like flimsy new models. I love it!
For my cutting table, I cut pvc pipe to length (12” for me) and put those on the legs of the table to raise it up to the perfect height.
The hardware store has metal braces you can glue or nail to the base of the desk to strengthen it. Also be sure all the IKEA fasteners are as tight as possible. Sometimes they work loose. I actually used some wood glue in the holes of a bookcase from them that was wobbly before putting the fasteners back in.
2:23 I also did this! The PVC pipe should be a diameter that will fit the table leg inside. There are also end caps that I added a non skid product to (IE the type used under rugs). A friend that sews w me is several inches taller and we switch out for longer extensions for her. The next task will be to add wheels!
for a table i would suggest looking for a vintage table. it's true they don't make them like they use to and old furniture is more solid than anything today. i'm always on the hunt for antique when it comes to sewing tools and equipment.
I agree. People are always selling solid oak tables for very little second hand - often in immaculate condition - we bought our modern, but very heavy, American oak table plus 4 chairs (we have extra from another set and can have 8 place settings if needed) for £150 (plus the cost of two strong men and transportation to remove it to our home - less than £200 in total at the time) from a couple who were moving and just didn't want the hassle of taking it with them. I'd spent hours looking for a dining set and just gasped at the cost, especially if they weren't good quality and solid wood. If it's too wide for the space, get a carpenter to cut it to the depth required and re-site the legs. You could make one table into two lengths by cutting it right down the centre of the length, spanning two walls by using substitute legs at the back, where you really won't see them. Ideally, if space allows, leave it as it is and even better if it comes with one or more extension leaves to give more cutting space when required.
I never wanted to put my threads on a wall because of dust - I live in the dusty desert.
Thank you for sharing your solutions that keep the thread dust-free!
We just moved to a much smaller living space, and I was at a loss as to how I would handle my sewing supplies. Right now, they are all in storage. You have given me some very good ideas as to how to work with this limited space for my sewing supplies. Thanks so much!
My sewing table is an 8 foot long butcher block countertop that is mounted to the wall with very heavy brackets and a space at the back for the cords to slip through. It holds both the sewing machine and the serger with room to spare.😂😂❤❤❤❤❤
Such a great idea to use a small table tennis table or ping pong table, as we call it in the USA. Thank you for the ideas. A couple of tips I have for using the rotary cutter, always cut away from you- never towards you. If it slips, you can harm yourself. Always locked the blade as soon as you stop cutting.
I saw an IKEA video and a sewer recommended an adjustable standing desk as a cutting table.
For my sewing table I use a wood designated sewing table I inherited. Very sturdy. I have the cart as well. Loved your ideas
I love seeing how people organize their things! I bought a folding cardboard cutting board back in the early 60s when I was in high school! I have mostly used it on a bed although I have used it on my actual cutting table. The problem is that the table is too high for me - and as one of those terrible shrinking women and I'm now only 5' tall so it's back to the bed. I bought a newer cutting board in the 90s but gave it to one of my girls since the old one was better! I have used electric scissors since back in the 60s - have worn out several. I have collagen problems and my hands hurt when cutting heavy fabrics, and the old corded ones are light and work well! I LOVE you light! My machine has wonderful light but more would be better! I do use white light LED bulbs wherever I can but that moveable arm would be wonderful!
For a sturdy table I purchased the adjustable Husky Table from Home Depot. It's industrial so it is very sturdy. I bought one with drawers and one without and added wheels. They have worked out perfectly.
I just came in here to make the same recommendation! Home supply stores carry so many items that are useful for sewers. Bright work lights and heavy duty work tables being the main ones. They have higher work tables as well. You could outfit a sewing room using mostly Home Depot/Lowe’s supplies and it would be cheaper and higher quality than anything from a sewing store. ❤
I bought the trestle legs called Mittback ($60 each) from IKEA, along with a desk top. The trestle legs are maple wood and adjust up to 36”. This is a much more comfortable height than a ping png table if you have back issues. But they aren’t wide. If I had the space, I would get another set for a fabulous pattern making/cutting table.
I love the ironing cart idea! Brilliant! For me, on the lower part, I will store pressing and ironing stuff like tailoring ham etc😊
These are great tips. I don't like thread on the walls either. Too much dust. I love that you provided solutions to the worse solutions.
Thank you so much for your wonderful review! I struggle with organization; dust and a cramped space are my main issues. This analysis is incredibly helpful! Have a wonderful weekend!
I am so intrigued that you appear to have been embroidering with wool 😮 I haven’t been brave enough to use anything other than standard embroidery thread yet. I’d love to see a video on how you do it.
Thank you so much for this video! I have a similarly small area for sewing and have been struggling with how to optimize my space 😅 I've been looking at the thread walls especially and thank you for your realistic comparison of how they work functionally with the drawers.
I hope you don't mind me sharing in return :) I noticed in the small clip where you are using the rotary cutter that you are left-handed and that you were pulling the rotary cutter towards you. I've been using the rotary cutter for a few years now and have several left-handed friends. Here are some tips we've learned :) there are left-handed or ambidextrous style cutters that allow for the blade to be placed on either side of the handle. This can make cutting along a pattern edge easier if the blade is toward the inner side of your hand and wrist instead of the outer side. Also, pushing the blade away from you to cut is usually easier and a more comfortable motion. It also is usually easier to control the blade that way. And a template tip - the template can move from pushing the cutter against the edge while cutting - it helps to anchor the farthest points of the pattern with weights so you don't have to move your hand on the template while you are cutting. And always use sharp blades so you don't have to retrace your cut! I hope this helps!
I look forward to more of your videos 🥰
I found an old oak teacher’s school desk. I haven’t used it for sewing yet but I think it should be great.
You can get shock absorbing pads for your table legs. I use them under my industrial embroidery machine. I needed them when I decided to run my business from home. It helps with vibration, sound and stability.
I’ve also found that a vibration absorbing pad under the machine helps a lot.
I absolutely love my ironing board ❤ However, its a bit old fashioned. You see, its one of those wooden ironing boards that were used before they created the metal ones. Sure its heavy and bulky but it never fails me!
As for a cutting table i have a folding table with legs that telescope up and down. I can use it standing up or if i need to sit i can lower it down. Most of my threads are kept in a drawer or a clear plastic container. My all cotton threads are kept in a special box separate from the other threads, i don't want them fighting with each other 😂🤣 Thank you for your video. Your ironing table is a fantastic idea! I have something similar that I could use. It even has a plug attached to it as well as wheels ❤.
Hi! Thanks for the video, very useful! As for the table - did you check whether it's leveled? If your floor is not perfectly leveled, it may cause such effect. For example, I have bought a closet and I thought that the construction is weak and it's shaking, but once we figured out that we need to place a 0.5-1cm adjustment under certain legs of the closet - it's now standing still, never shaking.
Nothing to do with sewing but I just have to say you have the most beautiful Pre-Raphaelite hair and colouring. They would have loved you as a model!
For the ironing board rust issue you can put a towel down as a temporary solution, and later when you get a chance spray paint with a rust proof paint.
Thank you for these tips! I struggle with the short iron cord; now when it is on a cart, you can iron the full width of the fabric.
I have a small sewing space too, got myself Ikea table with trestles, so I can incline it for drawing and adjust the height for cutting/sewing.
Thank you for your videos. I enjoy watching them. They inspire me in working in my small space as I don’t have a dedicated area to sew. I too wish I could afford a vacuum/fan ironing board. I have had my Polder blunt nose board for 15 years now and it’s as good as the day I bought it. They don’t make my exact model anymore, it has wheels, but they do sell similar models in the USA. I have used two Rowenta steam irons and currently use a LauraStar Lift Extra on it.
For your bed risers, if you know a wood craftsman they could make you some out of a post. They can customize the height and then core drill a hole to recess the table legs to give it stability.
I have a Husky adjustable workbench from Home Depot that my Stellaire sits on. At top speed my Stellaire does not make it wobble. But I also put a silicone mat underneath it. It also serves as my work from home computer desk & scan n cut table. It’s long enough that I also can put a wool mat next to my Stellaire and iron my in the hoop projects.
For rotary cutting, I found that using ruler grips helped me the most. I also weight down my longer rulers with canned goods to help me cut more accurately.
I’ve looked at Husky adjustable workbench and it looks exactly like a solution I’d like to have in my space! Looks very sturdy, but nice at the same time👍
Some really great tips. Thank you. I had a good chuckle about the thread boxes you mentioned. Years ago, when my son was little, he collected Matchbox cars and they sold a carrying case for those. They’re identical to those cases. In fact, I suspect the sewing people got their idea from those. Problem is, that when a specialized hobby, such as sewing, takes an idea, the price skyrockets. I have all my sons old cases and have been using for storing so many different craft supplies. Besides sewing and machine embroidery I am also a card maker so use some of those cases for crafts supplies as well. Most of the furniture in my sewing/craft room is from IKEA. They are masters in creating pieces for all sized spaces, and the quality is excellent and very versatile. ❤My cutting tables is made from 6 Alex low cabinets and we put a large piece of Masonite on top that makes the table 8ft x6ft. I have one of the full sized cutting mats on top of that. I realize that I am very fortunate to have a dedicated room for all my crafty activities. When we moved to this house 22 years ago, from a much smaller house we made sure that there would be a “spare” bedroom for a sewing room. 😉. Thanks again for sharing your ideas and experiences. ❤️
I use ikea alex drawers with an ikea table/ desk top on it for my big embroidery/sewing machine. Because the alex drawers are more than a simple table leg , this combo makes for a very stable sewing cabinet which also gives me needed drawer space. I love it so much that I plan to purchase another combo unit for my other sewing machine. The desk too comes in different lengths to suit my needs as well. Way more cost effective than a cabinet made specifically for a sewing machine
Fully agree with storing things in drawers. I think you did not mention that if something is stored on the wall, the color can change due to the sunlight, so also for that purpose it is better to store everything in a closed cabinet. I also store all of my textiles protected from sunlight, otherwise when I want to use them, I might end with faded colors on the fold line. The rotary cutter I love from the first moment. I do not think it is really a deep learning curve. You just have to be careful, because a good one is extremely sharp and also cuts the skin very well. :-)))
I bought the light several months ago at your recommendation. It is worth every penny! Tks
I got a vacuum/heated ironing table - found it second hand but in perfect condition
Best thing ever
No residue wetness
Holds fabric in place
Plus many other good features
I’m so glad if it and
Love it
I bought an antique oak folding tea trolley for less than £20 at auction. Nobody loves these older pieces of furniture anymore. I put a thick wool/felt pad on it so it's safe for ironing. It's also the perfect height for my sewing machine. Being on wheels I can move it around easily but it doesn't move unless it gets a good push
I found a great sewing table from the building center. It is a HUSKY brand workbench table which is adjustable height with a wood top and several shallow wide drawers for tools, thread, rulers, etc. There are multiple size and color choices, and it was not too expensive, under 200 USD. Very sturdy for my combination sewing/embroidery machine which is very heavy.
I also use one of these - it's an awesome table and has locking wheels so I can move it anywhere I want!
I too use a Husky work table that I bought from Home Depot. Mine is the model without the drawers, but it has locking casters on the bottom to roll easily and a hand crank to raise or lower the height. I love this table! I also have an adjustable light similar to the one shown, and it works quite well. I am debating whether to purchase a full ironing board or to attach a mini one to a rolling cart as I have seen on Pinterest.
I hated my ironing board-uses up too much floor/storage space. I bought a used but sturdy dresser that was about the right height to iron on & made a separate ironing top-MDF cut to 60" wide × 22" deep, covered in a couple layers of 100% cotton batting with ironing board fabric on top. Stapled all that to the board's underside & added lengths of square dowels to bring it up to the perfect height.
It looks like a perfect table, exactly what I imagine!🤩 Only need to find a suitable alternative available in Europe🤔
@@bethfoley84have the 6 foot tabe from HD. no drawers but the length allows containers up top
Thank you for this, it is so helpful. I think the light comes in different widths? Which one would you suggest.
I love my table tennis table, two sections on very sturdy folding legs, is perfect for cutting and crafting.
I still have the ironing table my mum gave me with the plywood board, after forty years ! A few years ago , I was considering getting a new one because the legs were scratched and shabby....I gave up quickly when I saw all the poor wobbly light metal things in the stores, even the priciest!I love my wood ironing table board so much.....I understand perfectly your feelings about the new one!May be you can get a plywood board to adapt on its legs in place of the cursed one?
I have a friend that has the same Ironing board with a piece of ply wood added and wrapped in batting and a ironing cloth. it is larger than the metal board it is great. There is a good table at Home depot and it raises and lowers with a crank. I use it with my Babylock.
i had that problem with ironing board that grid was on fabric. i bought wool fleece and cut it to board size. now it is excelent.
Love your video! What iron do you use?
I had a thread rack but live in a dusty desert so I gave it away. I now store all my thread in plastic bins by type of thread. I still use a sturdy ironing board that I have had for 53 years. It folds and is all metal and sturdy. I also have a small ironing table pad. My room is big enough for 3 different sturdy office type tables. One is height adjustable for my machine. I like that if I move, I can use whatever arrangement I need .
Ikea NORDEN gateleg table. Inexpensive, collapsible, sturdy as anything. I use it for sewing and feel zero vibrations.
For now, we are still in the home in which our kids grew through their teen years, and I have my daughter's old bedroom for my sewing room; it's quite spacious. Crawling around on the floor cutting fabric is a no-no for me, too, due to both back AND knee problems, so I got a sewing table from that online giant. It was less than $200 USD, but I use it A LOT! When family came for Christmas 2 years ago, I was able to fold it halfway and roll it into our bedroom. Daughter and her hubby and child slept in her room, and she helped me wrap presents on the half sewing table. The table got mixed reviews on the online website, but I got lucky and mine has worked out great. I hope other sewists are able to find good solutions for their sewing needs.
Thank you for sharing your experience. I'm going to be looking for a light like yours over here in the UK. It seems ideal for most any kind of close work. Have you considered an Ikea kitchen island for a sewing (AND cutting) table? They are very solid and stable, and there is plenty of storage with either the Tornviken or Vadholma models. Only a suggestion.
I just purchased the Gidget 2 table it’s sturdy and does not vibrate.
In addition they make an insert for the machine type that you have. The table also fold up and has wheels to roll away. I’m very satisfied with it.
Anti vibration mats from madam sew is a good mat for the sewing machine. At home I have a wooden desk but in my winter home I have a card table and the mat removes the vibration.
I have a sewing room. I am thankful for it. I may have to get that lamp.
For lighting I use the Husky 2200-Lumen Tripod. It's LED, lightweight and charges plugged in, but will work for hours unplugged. It's easy to move around to different stations (it stands on the floor) and the trio of lights can be pointed in different directions. The US dollar price is under $50.
I just bought a reversible ironing board cover that is cotton on one side and felted wool on the other. If nothing else, the wool/cotton should take up some of the moisture before drips form. Another simple solution is to insert two layers of cotton lining, basically a folded sheet, under your ironing board cover. I remember ironing boards from my childhood where my grandmother had laid a cotton quilt remnant under the cover for a smooth lining and to prevent any rust leaching thru to the clothes.
O enjoy your videos! As for bed risers, try short pieces of 2” PVC pipe. My friend runs a bolt through the pipe sides that actually keep the table legs from resting on the plastic pipe completely., since they rest on the bolt.
That is what I did with my folding table. I love It. Really saved my back,
(Linda) Hi Julija, omg love your video. Yes, I too have a few things I changed and here are mine. First is I don't have space for an ironing board, so I bought on Amazon the OIiso MultiMat 100% New Zealand Wool that are 36cmx36cm (14.5"x14.5) and about 1" think 2.5 cm. It really retains the heat and with your iron or mine (not as high end but entry level) it REALLY does an amazing job!!! OMG, I bought six and they have these silicone orange joiners they are marvellous. N.B.: I put my joined Oliso wool mats on top of my big green cutting mat to iron my fabric but while it did not burn the mat (2.5 cm thick wool mats) but it was very hot, the intense heat of my Sapporo warped my green self-healing mat. So do it elsewhere. (ALSO NOTE THAT SINCE THEY COME FROM SHEEP, they do have that smell, but i don't mind. In time it should fade). So I Highly recommend the Oliso Wool mats that you could put on top of your ironing board, and maybe to cut them to match its design( Or buy a less expensive rectangular ironing board, where you could line up the Oliso mats. I have an entry level iron where the water bottle is hung 3 meters above my table (put a hook in the ceiling) and not a boiler like yours, which was more expensive so opted for the hanging bottle which works wonders!!! THE BEST decision i ever made! And as for a sewing table, i have yet to buy one. I have serious back issues and i was looking into buy one of those electric desk tables that you can chose your height and most have 3 memory programs-since the base legs are in a "H" form i think it would be more steady. Also most of these desks have a thin large thin drawer where i could put all my small marking tools. So look into these types of desks. I am really leaning toward one though i have new clue about how it would handle the vibration of the sewing machine---BUT, since i have a bad back, I would still opt for it and find a way to anchor a few nicely fabric wrapped bricks 😂 on the bottom part of the H ....I know but in my case HEY WHATEVER IT TAKES TO HELP MY BACK. Ohh just a note, the spring that is attached to the sole plate for the iron, I have put the spring "behind" the iron so that way it pushes the iron forward into the sole plate. It's better than on top like you have it now. Thank you for all your videos, i follow your work and hope for a new video every Saturday morning while having my coffee!☕😊
Thank you for such insightful comment!🤗 As for the spring on the iron shoe - it was such a challenge to put this one on and it came with no instructions, so I’m not fully sure it’s correctly placed😅😁
@@Julija_Gobereyes right now your spring is almost in the way of your hand when holding your iron; just bring the spring down behind the iron so it pushes it forward into the pointy part of the shoe. It will be more comfortable like that. It’s the same principle as a woman’s shoe with open heel. Usually you have a thin strap behind with an elastic so it pushes your foot in to keep it on😊. ❤
Fabulous information, I particularly like the sewing station idea. I have a trolley I can use. I thing my Olisio iron, hams and Mary Ellen’s best press will fit on the top shelf, the next shelf I’m going to employ your idea of the accessories box of the things I use on my cutting table and the lowest level can house my label maker, bias binding machine and my Bernina stitch regulator- that I can never find when I need it. Thank you again for sharing these fabulous commonsense tips. 🌹❤️
Where is the daylight lamp from please? It looks like a good solution for my lighting problem.
Your sewing talents are amazing and you manage everything in a small space! I've always thought thread walls gather dust, and eventually exposure to light could be a problem. You are solving every issue, including a temporary cutting table. I've never seen a rusty ironing table in the US. Keep looking for a good one. Thanks for sharing and showing beautiful finished projects!
I brought an old fashioned second hand gate leg table, cost 20 pounds, can put one leaf up or two depending on my requirements, it is solid wood, has a cupboard at each end plus a drawer at each end. I attached castors to each leg so can move it around easily and it makes it higher. Once done I can fold the leaves down and it is about 1 metre long and 30cm wide, it's brilliant
My sewing table is an electric, standing desk. As it’s designed for computer and computer monitors, it takes up to 150 kilo weight, it’s very stable and is height adjustable for the sewing decks of my machine and overlocker/serger. This is not a cheap solution - but it is so worth it.
I am about to take delivery of a second electric height adjustable standing desk 180cm x 90cm, which I will cover with the same size cutting mat. This will become my cutting and pattern preparation table.
Regarding getting used to using a rotary cutter, I found when I started to make my own bras that I worked best with a smaller rotary cutter. For me the perfect size was a 28mm rotary cutter for cutting garments - it’s much easier to negotiate necklines, armholes and other similar curves. I now do not use my 40mm rotary cutter at all and I am looking to donate this item.
The rest of my sewing furniture is mostly IKEA and inexpensive storage solutions. I have finally found what works for me!
I’ll look into electric adjustable height tables - I agree, they are not cheap, but this is an item I use daily, so a comfortable solution would be worth investing👍
I think I'll buy an electric standing desk as well for my sewing/cutting table! I was wondering though whether it would be stable enough with the vibration of the sewing machine, considering most of these tables have only 2 legs. May I ask which model you took, and whether the stability is good for sewing? Thank you!
@@CerseiDM I have two electric height adjustable desks. My first one (approximately 3/4 years ago) is for my sewing machine & overlocker which I purchased online from Zen Desks, which subsequently folded during COVID. It is 1500 x 750mm. I would have preferred 1800mm but this, at the time did not fit my space.
My second purchase is from DESKY, again online which is purely for pattern work & cutting fabric. This I also purchased online and the desk was custom made for to be 1800 x 900 mm. I topped this with a cutting mat of the same size from J K Trading, again an online purchase and the mat is packaged flat. I deliberately chose these dimensions as 150 cm fabric folded is 90cm. DESKY Shipping was $35.00 which amazed me. The custom width cost I can’t remember but it was negligible, I think an extra $30.00. DESKY supply all tools, with the exception of a screw driver to assemble the desk. They have clear UA-cam videos on how to assemble.
The desks are designed to hold 140kgs and are exceptionally stable, do not vibrate or shake in any way. Remember they are designed to hold computers, monitors and additional paraphernalia. That said, regardless of the surface I have my machines on, I do place a piece of foam under them.
Find it best to get the dual motor powered desks - one motor for each leg. If you are getting a desk for your machines do purchase the power cable management tray. It makes a difference. Consider adding a drawer. I made a mistake with getting the slimline drawer and I don’t advise this option - it’s only 3.5cm deep.
Good luck 🤞
@@judithsullivan6723 wow thank you so much for the detailed answer!!!! 🙏❤❤❤❤ it helps a lot!
I don’t use a table for sewing, instead I placed kitchen counters along the two walls in my sewing room, one is the perfect height for me sitting the other is at standing height as my preference sometimes is to stand while sewing. It has been a great solution for me.
I’ve used to sew in the kitchen and used kitchen counters instead of the table when I first started sewing and they were perfect for this purpose!👍
I use an old sturdy bedroom vanity desk as my sewing desk. It's great whether I'm using my overlock, or sewing/ embroidery machine. And yes, rolling carts are so great for organizing and mobilizing necessities that I don't keep in the vanity drawers.
Brabanti not only makes good ironing boards, but COVERS--after I bought a mini boiler steam iron, I got their cover designed for these types of irons, and the extra layers/materials that prevents the condensation issue you describe!
Oh great idea - I’ll look into their covers!
Agreed. I have had one of their extra wide ironing boards for more than 15 years and it still works perfectly. I ordered a new cover about 2 years ago. My husband made me a rectangular wooden top to sit on top of the ironing board which I covered with 4 layers of cotton batting and a layer of fabric. Now I can iron the entire width of fabric when I am quilting. 😊
@@karenneiman856 oh, the extra board cover sounds great! I do hate flipping yardage around that needs to be ironed after washing before cutting due to the pointy end/wider than the board is long! I've had my board for over 20 years & on my third cover--hard to find the extra wide replacement cover over the years, but hooray for growth of the internet & international shipping! Got this special one from Brabanti's own site & shipping from Italy to US was worth it! (Other styles of their covers sold by other retailers, too).
I stabilized my table by having a bracket installed to anchor it to the wall. Bed risers are on Amazon or mattress store as they were originally made for beds.
I bought the wide lamp on your suggestion in a previous video and I am very happy with it. Thank you for the recommendation.😊
My sewing cabinet comes from the thrift store. I didn’t install the sewing machine to fit in. I just put a thick chopping block over the hole. It pretty much stays put. Once in a blue moon I have to adjust it. Cutting table and altering table is table from Walmart. Is height adjustable so I just got it where I was comfortable doing things. If I need to sit because of my age and back my chair is very easy to raise & lower. A lot of my organizing things came from the dollar tree and harbor freight. I sometimes use my cutting table to iron large pieces of fabric. I had a friend who managed to find a table with fold down legs . She attached wheels to bottom of table. She could easily roll it under her bed and out when needed.
Thank you so much for your tips and honest reviews
I've always wondered why everyone doesn't use a rotary cutter. They are so much faster, and in my opinion more accurate. Thank you for your video.
Back when I started sewing, rotary cutters weren’t popular where I lived, so I got very used to scissors instead - now it’s a challenge to switch!😅
I was going to mention both the wool ironing mats and painting your ironing board with a rust inhibiting paint like rustoleum. But others already done this. Instead I am going to tell you how lovely your turtle neck dress looks on you. The green colour against your beautiful, coppery red hair is stunning and makes your deep blue eyes pop. Sorry if this seems OTT (over the top) but I am a red hair fanatic 😅 who cannot help herself!
This is so useful ! Thank you for sharing ❤
My ironing board has a solid metal top which is much more stable than the mesh top boards. The mesh tends to flex and you get the water drip problems as Julie describes. My board was a wedding present in 1977 and is still going strong!
I need to look into solid metal top ones!🤗
If you can't get the bed leg raisers, you could try using pvc pipe pieces to raise the table for you. When doing craft fairs, I have seen many vendors use this technique. If the legs are straight, you will need to put a piece of doweling or other item to block the table leg from going all the way down.
That’s a smart idea!🤩
I made a TV tray with an ironing pad from Amazon over that for small projects. Which I put on pinterest. I used an old door and padded that with white muslin on top for a big ironing board and also use it over 2 waist hi book shelves. The book shelves i got from Amazon they have 3 shelves. The shelves i use for storage sewing boxes. The old door is on top as a table/ironing board. I use the cutting mat over the padded but not to thick, board to cut fabrics. Thank you for sub the wallboard for threads are not utilized enough for space. I thought dance way wow an easy way to stir thread but it is costly and I prefer the drawer or storage drawers on wheels. Good tips.
Find yourself a vintage desk, perhaps one of the steel ones. They DON'T MOVE in any way, and they have storage too. Mine (which is heavy particle board with formica surface) has a hole cut in the surface into which I've set my machine (we put a shelf underneath at the right height). I also altered the desk by removing one set of drawers for a wider leg area. It's perfect for my space, if a bit odd looking. Not expensive at all, under $25.
Thank you! This was really helpful! I have a question since I’m a beginner but I know how to sew a lot of things, what does frontline in body measurements mean? I’ve searched everywhere and can’t find it! Thanks again!!
I took a sewing class a few years ago and they uses long white folding tables to setup the sewing stations. They also needed to add an extra pressing (Ironing) station so they used the same white tables and used PVC plastic drain pipe to make extensions for the leg to make them high enough.
Make your own ironing board from real ply wood. Make it the length of the fabric you most use and the width of your choosing . Easy to store. I made the strand from the modesty panel from my sewing table. (Original maple IKEA) and screw on legs. I have had mine for more than 10 years and no warping. I cover it with muslin, padded it with wool quilt batting, and wash it or toss it when it gets too used.
Although ive sewn for year ive just got my own sewing space .Space is so i'm using a cumputer desk for my sewing table . and have hust bought a small Diy organiser for all my small notions
Some ironing boards claim they are good for steaming. I got one such, and it has held the promise.
Hi, In case you haven't found those risers for your cutting table, I suggest that you try the medical supply shop where you live. Even if you live with socialised health and medical benefits that are usually independent shops too. If all else fails there might be on online in your country. The kind of shop I've seen sells things like walking sticks and joint stabilisers (don't ask me how I know), sometimes you find them selling Tempur Pedic products and compression bandages and stockings. If/when I need risers in the future, if they don't have them on Amazon I'm heading to our local medical supply shop. It's been around for more than my generation even with our socialised medical services. Yours, Ann
At one estate sale, the thread cones were in clear plastic boxes with lids. The containers could be stacked on shelves.
Pvc pipe all cut the same length can be used as table risers
Table tennis table - BRILLIANT!!! Look for PVC pipe to put on table legs to raise it up. 😊
Have you sold your Jack sewing machine? I got one because of you and still love it
Dust on thread, definately a problem! I agree, not a great way to store thread (on the wall). Plastic bins or drawers are best.😊
You could sew a removable cover for your thread wall in the closet. A roll-up version with snaps would allow you to hold up the cover on a day that you'll be needing to add or remove threads for awhile.
They make iron board covers that have a little padding and a reflective material that reflects heat back up. I think they are also waterproof, meaning that the steam wouldn't penetrate but rather be redirected upward. One of those will solve your issues with your ironing board.
Thank you for the great video. Could you perhaps secure your table to the wall?
I bought that same lamp after watching your review of it
Choosing thread walls or racks, etc for the aesthetic is entirely fair and reasonable for those who do it, but I fully agree it's anything but practical.
I'm lucky to have been able to place my machine by a big window for natural light, but it means a convenient thread rack would also get a ton of light, which would unnecessarily degrade thread I haven't even used yet, so not my choice either.
Very helpful hint, I appreciate your insight. Love your sweater dress. My neck suits mock turtle necks
you could attach the sewing table to the wall with metal corners so that it stands firmly
The other problem with a cheap ironing board is there isn’t enough padding. Mine has thick cotton batting over the painted metal screen top, plus a thick cotton cover. I don’t get any of the dripping issues. (My ironing board is a wider model which I really like)
I bought a Flexispot E7 sit stand desk base and reused an Ikea table top. It seems like an expensive solution but I wanted a strong base that would go low enough for my serger, raise up for my sewing machine and then go high enough for cutting out. It is rock solid when using the embroidery machine. I chose the E7 because it goes from 58-123cm in height and can adjust in length from 120-200cm long and 60-80cm wide for the table top. A lot of the cheap sit stand desks start at 70cm which is too high for my serger and sewing machine and also limit you to specific table top sizes. If you choose another base make sure that the cross bar is in the middle, some of the other models have it set back to give more room for your legs, but this can make the table top bend down slightly under the weight of your machine (poor buy from Ikea). My embroidery machine in particular needs the table to be level. Whatever table base you buy I have found that the Flexispot wheels ( they call them castors) will screw into the base of most table legs, including tables from Ikea. These tables take a much shorter screw length than is available on most screw in wheels from Amazon. If you use the wheels you definitely need a desk base that goes down as low as 60cm from the floor as they add around 10cm of height. I put a cheap magnetic white board on top of the table under my cutting mats so that I can use magnets to hold down my patterns. I use the skittle shaped whiteboard magnets as they are easy to pick up. Somtimes I sew standing up, it is great to have the option.
I agree with you about thread storage, drawers or boxes are the way to go. If you have enough thread for a stand you will not be using all of it regularly enough to stop the build up of dust. I have seen some sewing rooms where they have put a plastic dust sheet over their thread, so that might be worth trying.
I like the idea about adjustable height table - it does seem like a very practical solution for several purposes👍
Not sure if you have Amazon but they may have the the Bed Leg Risers for your cutting table.
@12:35 Rotary Cutter safety first! Motion away from you so the blade stroke is also AWAY from you. Watch hand position also. It's also easier to get more accurate cutting. Just be safe.
Noted!😅😁
A safety tip for rotary cutting…it appears you are running the cutter toward you but you really should push it away from you. This is the recommended method of use, it is much safer and will be more easily controlled.
Bed risers show up regularly in thrift stores (charity shops) where I live in the U.S. I also was surprised to find them for sale recently in the hardware area of a big-box home improvement store.
Karen Brown of Just Get It Done Quilting has a great video on how to safely and accurately use a rotary cutter that you may find helpful. 🙂
If you are looking fir bed risers try looking in a store that caters to handicapped people. They often require the risers so that health care people have the beds higher. In Canada I got the ones for my husbands bed at a medical supply company.
If you cannot find bed raisers for raising your table, try some flower pots turned upside down. A friend of mine used flower pots to raise her dining table to a better height for cutting fabric back before bed raisers were made.
Your thread wall is a pegboard. You can get it hooks and store other stuff on it and put the thread where it belongs - in drawers.
I store my thread in the empty cookie containers n it works well.
Yes to NO to thread wall - dust, space, also some thread will fade from sunlight - back into a drawer it all went!