STAINED GLASS NIGHTLIGHT! HOW TO!
Вставка
- Опубліковано 10 лют 2025
- HEYYYYYY! Thank you so much for clicking on this video, today i'm going to be making mini stained glass nightlights! As always I will have the most important supplies needed linked,
as well as any related videos you may need to help in your stained glass journey! Please feel free to leave any questions down in the comments below, i'm always around to answer them!
Check out my instagram and my etsy!-
.
If you want to tip ME, My Venmo is @Makenzie-Hallie
PATREON
patreon.com/Ma...
MY STAINED GLASS VIDEO PLAYLIST-
• Stained glass making
MY FAVORITE GLASS MAKER PRODUCTS!
www.amazon.com...
MY AMAZON STOREFRONT
www.amazon.com...
All amazon links are affiliate, which means I make a very small commission off of your purchase-through my links. It does not change the cost of the item, but it does
help to support me and my creative endeavors here on UA-cam!
BUSINESS EMAIL *- makismysticglass@gmail.com
MY BUSINESS SOCIALS & CONTACTS-
** INSTAGRAM- @makismysticglass - / makismysticglass
** MY ETSY SHOP- www.etsy.com/s...
I’m just beginning at stained glass and i love this idea i can’t wait to make my own stencil ! Thanks for the inspiration ❤
Welcome to stained glass my friend!
Hey girlie! Love the night lights! You're designs are always so simple yet so adorable! I do have one thought though, if your clips are made of brass (I'm not sure if they are or not, they look like it) you can just put flux on them, heat the clip up on a higher temp with your iron tip just a sec and the solder will flow and cover your whole clip! No need to copper foil the clip, and once covered with solder, you can solder anything else to it like your foiled glass pieces. Anything brass, will take the solder, oh and be sure to sand over the brass with some steel or bronze wool first to help remove any oxidation. It will help the tinning process go easier. Hope that helps and I think you are very talented! 🤗
You are awesome girl! I have learned a lot from you!!! Thank you for taking the time to share your knowledge.
Thank you for watching! 🖤
You do great work. I have been doing stained glass of 26 years.
Keep up the great work
oh wow! that's so awesome! Thank you so much!!! I appreciate you watching, even as a pro!!!
Oh my goodness but your are SOOOOOOOOOO talented, gifted, generous and inspiring...I’ve learned a lot binge watching your videos today...whilst staring down a soldering project I’ve been avoiding since last spring😩😩😩. I think I’ve gotten up the courage to finish the little terrarium I was making so I can send it to my brother for his birthday...in April, lol. Thanks for your hard work and dedication. I’ve learned more today than I ever did in over a year of classes 😁
Aw im so glad it was helpful and you feel more ready! You can do it!!! Im here if you have any questions!
I love your videos I started watch my first Time a week ago thank you
@@MakenzieHallie thank you love your videos very helpful
Love her great tutorials
Thanks to you, I just finished my first nightlight (lotus flower). It is soooo much fun, and challenging, that I’ve already started my second one! Thank you , Thank you , Thank you! 😉🥰🙋🏻♀️🇨🇦
Awesome!!!! Im so glad your enjoying it!!!
Cute as a button! I would keep them also! I think they would be great for personalized gifts. You could literally make anything. Thanks for sharing! Friend from Washington State 😃 🌲 🌲🌲
So inspiring! I want to start a creative business sooo bad!! You go!!! Love it!!
I'm so glad you feel inspired!!! Thank you so much for watching!!!
Awesome! been looking for a tutorial on how these are constructed. Thanks for all the great info. xo
i love love love watching you creating amazing art work with nicest manner!
Thank you so much!! I'm so glad your enjoying my channel!
Holy Cow! You are sooooo good and talented! Love your tutorials ! Thank you! 🙋🏻♀️🇨🇦
Practice and LOTS of free time is all 😂🤣....Thank you. And thank you for watching!!
These are so cute! You are so talented and creative. 😻
Thank you so much! I appreciate it!! thank you for watching!!
You're my favorite to watch! I love your artwork and energy for the craft! You should do a video on stained glass boxes! 🥰🥰🥰🥰
I love it cute lights
Living for your nails! When I saw all the night lights right after you attached the night light clips, they looked like little hair clips on the mat 😂❤️
😂😂😂 those would be some tiny ass glass pieces!!! and thank you as always!!! I appreciate you watching!!!!
Makenzie Hallie no problem! Sorry I’m two weeks late! I have post notifications on (obviously) but I’ve been so busy, so the notifications for both of the uploads were in my Notification Center this WHOLE time! Ahaha
Thank you for this video, very informative
Im so glad! And thank YOU for watching! I'm so sorry this response took so long, i'm sifting through pages of comments youtube never notified me of!
Very clever & crafty - YouGoGirl - Ushta-te!!
I absolutely have to get my hands on a clouds and moon nightlight 😍 Can’t wait time see what you have with your next shop update!!!!
I'm so glad your enjoying them!!! I'll be announcing the release date on my IG soon!!
This is really inspiring! I think I'm going to order some and give it a try. Thanks for the awesome video!
I'm so glad you feel inspired!!!
Loving these night lights! Can you tell me what the black mat is you are using and where I might be able to get one?
Erg leuk om je te zien in deze je bent echt heel goed ga zo door groetjes uit Amsterdam 👍👍
Makenzie! Thank you! I was wondering what you are soldering on?
Hi Makenzie liking your glass videos for sure.. and a Big thank you.. where can I purchase the black bin you use for your grinder? Thanks in advance.
Hello! Just about most hardware or storage stores!
Thank You for the beautiful video. I’m looking for a video of how to add a hinge between two panes of glass and a lock to turn it into a locket and Ik’m hoping you could help. Thank you 🙏🏻
Oh and yes I split my foil on the inside cut glass because I did not know your secret to stretching the foil first. Thanx again! :)
Awesome!!! I'm so glad you learned a new trick for foiling!!!! Thank you so much for watching!
Hello Makenzie, What temp do you set your, HAKKO, iron to? Thank you for your work, you're very talented and quite an industrious young lady. I appreciate your attention to detail and sweet humor and style. I have re-initiated my stand glass work after 40 years. I'm super excited because I just reconfigured my wood workshop for glass work. You are quite the inspiration. I made your Rose as my first piece. Difficult inside curve cut in the middle of that one, took two try's but I got it. Thanks again.
aw awesome!! I'm so glad your getting back into it!! And yes it really is, when I first made that rose I struggled big time! I'm glad you made it!!! And I'm usually right at about "310" marker, for 60/40! Thank you so much for watching! and thank you for your support!
Very very nice -. And well made -. Indeed you are very gifted and with a big hart -. Maybe I am missing but where can I find the list where you link the material ?
Is it possible to solder Jewellery wire to glass ? I have an idea for a night light that combine both -. I have tried serval time but that was a total failure lol -.
Hello! Thank you so much! The bulbs and nightlight module are linked in my description! And it depends what type of metal, the jewelry wire is! My most recent video about soldering, goes all over those basics! 🖤
@@MakenzieHallie Thank You so much ... if you have other request on Jewelery Wire & Glass, could you show us the best method to do ? i did try using copper wire,i did apply coper tape on the glass, i apply flux , at first impression it looked like the wire was bounded to the glass but after i try to see how solid that was, the tape came off the glass .. i think it is because i did not apply apply extra pressure so the copper tape is really secure -.. Also should the wire and the glass be bounded sideway or by the front -.
i apologize in advance if you have already answered this in one of your videos, but where did you get that black mat for while you were soldering? And what are they called? Would you say it is still very helpful? I want to make some stained glass jewelry so having those different compartments would be very handy! Thanks! And learning so much from your videos. I am doing a lot of research right now before buying all the supplies and your videos are by far the most helpful
It's a soldering mat! Just throw that in Google and tons of options for shopping them will come up!
I’ve been binge watching your UA-cam channel! Quick question....do you use regular scissors to cut out your patterns or special channel scissors?
So glad your enjoying it! I use regular scissors for everything!
@@MakenzieHallie thanks so much for your quick response! I always thought you needed channel scissors when cutting out pattern (which are a pain in the butt if you ask me)!
Of coarse! And nooo, you don't NEED to do anything! Whatever you want to make it work! Just be conscious of that extra space.
Omg how beautiful and cute I love you 💕 I need to get one
I'm so glad you like them!!! they will be released within the next week & a half! Thank you for watching!!
Love them!!!! You are so Super cute Maki!
😘😘😍😍 thank you for watching!!!
Why do you use 1/4 inch foil on small pieces? Normally I would think 7 3/2: except for making stronger. Ty so much
Because I liked how it looked! I did way back when I filmed this video, and still today! Realistically, you can use what ever foil you want, after the minimum for structural integrity. ♡
I have one question where did you get your Gray mat that has the grid and ruler?
I got mine at acmoore when they were still open! BUT good news is you can find the exact mat by the same brand on amazon, at Walmart or Michael's! Its a fabric cutting mat, so you cant solder directly on it, but I do just about everything else on it!! lol! I'm so sorry this response took so long, i'm going through pages of comments youtube never notified me of!!! Thank you for watching!!!!
What are the size ? Blessings
What was the glass you used
Ugh I’m so bummed! I ordered these and they didn’t send the clips!
Aw yea you usually have to buy it all separately!
So where did you get the night lights at