Just get a Barnett Billet basket. Hinson baskets groove like stock. The Barnett basket uses stainless steel inserts. Keeps it from grooving and shifts very smoothly. And they are 100% made in the USA.
Do you have a video on the 2014 and newer yfz slipper clutch ? And witch is better for trail riding and dunes slipper or to back date to pre 2014 style clutch ?
Liked your repurposed clutch basket jig (very cool). Its nice to see some old piece of junk and say to yourself, 🤔I think I may be able to use that...Im always looking at things with a repurpose in mind
I like to repurpose things as well. That being said, be careful, the extra play will cause a slingshot effect and it will wear grooves even faster and even worse the "arms " or fingers will stretch and the outer most clutch friction plate will try to become an oval and crack in time and can detonate completely , resulting in catastrophic failure... just a heads up. I only know from experience.
Great video. Iam in the market for a 450r, and I been seeing alot of treads on stock clutch basket exploding. Do you recommend replace the stock basket from the start? If so what brand you recommend? And is this a diy fix? Are have a shop do? Thanks for your time.
I have a 18’ yfz450r and It’s bone stock has very low hours I was always aware of the exploding basket since I’ve had friends that owned 450r’s in the past and had to pay 2-3k after the clutch exploding so I would say a oil return can set up I have the 38 motorsports one on my bike and you can also go oem with changing the basket which would be the 2009-2010 cushion basket I know some spots have them as a kit with the basket washer and lock washer for around 300-400 I have that in my bike but I have a complete clutch so the retaining plate and inner hub also but you can just buy the basket and use the slipper clutch in the newer 450’s and it is def a diy if you watch on here you should get the run down on it
I have my clutch basket oil pump gear with 6 broken teeth as well with the oil pump gear? Not sure what could have caused this? Any advice would be surely appreciate it.
Just get a Barnett Billet basket. Hinson baskets groove like stock. The Barnett basket uses stainless steel inserts. Keeps it from grooving and shifts very smoothly. And they are 100% made in the USA.
Sure it will groove after many hours. WHEN YOU SEE GROOVES THAT ARE DEEP ENOUGH TO MAKE IT STICK.
Do you have a video on the 2014 and newer yfz slipper clutch ? And witch is better for trail riding and dunes slipper or to back date to pre 2014 style clutch ?
Liked your repurposed clutch basket jig (very cool). Its nice to see some old piece of junk and say to yourself, 🤔I think I may be able to use that...Im always looking at things with a repurpose in mind
I like to repurpose things as well. That being said, be careful, the extra play will cause a slingshot effect and it will wear grooves even faster and even worse the "arms " or fingers will stretch and the outer most clutch friction plate will try to become an oval and crack in time and can detonate completely , resulting in catastrophic failure... just a heads up. I only know from experience.
3:55 just happend to me on my yz250f 2020 with 110 hours :( not fun. going to replace the basket with a rekluse tho :)
What it takes to have a 2020 raptor 700 pushing over 80hp
I changed a basket out once on my 2009.. then went with a recluse..
change Raptor 700 basket too?
Is there a model that does not have the spring basket plate?
Replacing my pump gear and found no basket.?? Odd. Any help would be appreciated
I'm riding a stock 2017 yfz450r should I get this done
check the housing for cracks like he talked about at 3:55, the housing broken on my yz250f 2020
Great video. Iam in the market for a 450r, and I been seeing alot of treads on stock clutch basket exploding. Do you recommend replace the stock basket from the start? If so what brand you recommend? And is this a diy fix? Are have a shop do? Thanks for your time.
Did you ever figure it out
I have a 18’ yfz450r and It’s bone stock has very low hours I was always aware of the exploding basket since I’ve had friends that owned 450r’s in the past and had to pay 2-3k after the clutch exploding so I would say a oil return can set up I have the 38 motorsports one on my bike and you can also go oem with changing the basket which would be the 2009-2010 cushion basket I know some spots have them as a kit with the basket washer and lock washer for around 300-400 I have that in my bike but I have a complete clutch so the retaining plate and inner hub also but you can just buy the basket and use the slipper clutch in the newer 450’s and it is def a diy if you watch on here you should get the run down on it
I have my clutch basket oil pump gear with 6 broken teeth as well with the oil pump gear? Not sure what could have caused this? Any advice would be surely appreciate it.
Likely the oil pump locked up
Are you going to make a billet gear and springs etc instead of having to use the original parts
no plan to
So do you sell all this in a kit that we can just order everything needed in a package.
yes, we have it available for purchase. gear installed and ready to use. there is a core charge that is refundable for the oem basket/gear
How much does the henson basket cost, i might consider it once i do the clutch in raptor
cost is currently 275, and 50$ to swap the gear
MrCuervoRacing thank you
Do you have to send in your core for the swap?
What is the price for the complete basket and swap with out sending in my parts, for 04 660 Raptor?
Do the raptor 700 clutch's explode causing failure like on the yfz450's?
Did you ever find out? I have the same question
@@goldenboygq9 I never heard so I don't thinks so.
Hi there can you give me a call need to talk to you about a Wasco clutch basket