Це відео не доступне.
Перепрошуємо.
Tig Welding Stainless Steel Tubing
Вставка
- Опубліковано 14 тра 2013
- weldmongerstore...
Using a Tig finger to for tig welding stainless sanitary tubing.Tips for tig welding stainless steel tubing. How to purge with argon, and a tip for making a foot switch so that you can stop without having to brush, grind, or file.
www.weldingtips...
![Дон ДОН, Алаудинов и СБЕЖАВШИЕ из под Курска ахматовцы 😁 [Пародия]](http://i.ytimg.com/vi/dEfCf5IK26Q/mqdefault.jpg)
you could never be a hack!!!! i resent that statement. love your videos and you have been very helpful to thousands of welders around the world.
Thanks for this "old" video. I've never done sanitary tubing but have a job coming up. Now I've got a baseline to begin with.
As a hobby welder I appreciate every movie again from you Jody, your presentations have taught me a lot! Thx!!
Haha sounds about right! Thank you sir! I have been tig welding for a little over a year and have watched ALL your videos multiple times. Thanks for teaching me how to tig!
Really diggin the split screen. Hope to see more in the future.
Thanks for the video! I've been practicing welding sanitary tube at work for the last week. Wish I would have watched this at the beginning of the week. Yet another practical and informative video. I always have to keep a notepad nearby when I watch. Keep up the good work.
Thegenrl- I've got about 5 hrs on my first and it barely looks dirty. Thing definitely makes propping easier not burning your hands. Jody- thanks again for your pointers and great videos.
Can not find a place that direcetly ships Tig Fingers here to scandinavia, the local shops we have that sell the original Tig finger are asking 70 bucks for them, Lol. I would much rather buy 5 of them directly from Jody and support him than those thieves. You are awesome Jody.
thanks Travis, I have been watching quite a few of your vids lately. there is always something new to learn
i borke my hand at work and when i got back to work my b oss put me on a tig wdlder and by watching your vids it helps me out alot i love free handing with tig.
TIG fingers are very good for horizontal butt roots, bought myself 12 and only have 2 left as everyone wanted to buy it :) made some monies. Great videos as well. I always use them to refer to for correct techniques, Thank You! Got 6g pipe test this month. 100% will be using my TIG finger..
if i am not sure what type of stainless it is, 312 would be my first choice. 309 second, 308 third.
exhaust headers could be 300 series stainless like 308 or high end headers might even be 321, but some are 400 series like 409. 312 will handle all of them
Thanks for the excellent upload as usual Jody, Tig on SS is rapidly becoming my bread and butter at work now and want to pass my first certification on it soon so the tips are just what I wanted! Have a Tig finger already, and use it all the time. Keep your excellent additions coming!
Jody,
We use a big tapered brass plug with a hole in it to purge pipe. It works for 3/4" to 4". Just lightly tap it in and it seals up nice.
Your vids are geting better and better. Keep on the nice work!
Wonderful video proving that you can weld sanitary pipe free handing
Bravo 👏
Love the split screen effect. Just goes to show it's more the person than the equipment that makes great welds. All the bells and whistles are nice, but I think the old school methods teach you better technique.
bought the tig fingers and like them incredibly!!! they shield the fingers so well on tough welds.
i miss welding so much can't wait to get back to still a first year got about 300 hours working at a ship yard. Hurt my leg when i was going down a ladder knee poped out so still waiting on that to heal up.
Jody makes me realize just how much I suck at TIG
I bet you are a lot better nwo since he showed you how good you could do it! Right?
contractors develop procedures for all kinds of processes and joints that are not common. for example, i have heard of open root pipe with 7018 for the root with no backing. It depends on job requirements, the engineering authority, and if the procedure can be qualified within the scope of the applicable code.. But I cant picture flux core working very well. One slip of the hand and you have whiskers inside the pipe.
hi idol im a welder here in the philippines im always watching your videos and i learn a lot hopefully you can visit us here theres a lot of welder here idolized you im one of them haha,by the way i love the things you are promoted like those consumables items and someday i wish i got that things.. thanks and i would to say some word from philippine language "MABUHAY KA IDOL"
Got myself a set of tig fingers they work great
if i needed a machine to practice on 6 inch schedule 80 pipe test and money was an issue, the 140 would be first on my list. it seemed pretty solid while i was testing it out.
Dam Jody is theres something you can't weld?? you are a master !!
wall thickness is only about .063" =1/16" = 1.6mm so no bevel. square flat cut and filed smooth
I am guessing you should probably use filler metal. It actually depends on fit-up, joint type, etc. for a good fit on an outside corner joint, you might get by with no filler. But on other joints with slight gaps, filler metal works better.
Another excellent video. And dang it......y'all order a 3 pack of fingers. Was just using one the past couple days on a bunch of aluminum projects and they are indeed a damned handy thing to have. Kept the burning and cussing down to a bare minimum (not a welder by trade at all, but in the shop I work at I am constantly building brackets and other bits and pieces out of a variety of materials to bolt down various items in police vehicles)
Def. hot... I feel very fortunate to have started out tig welding on stainless and still do everyday. Love that stuff haha
Love the split screen, very helpful.
That's cool the buzbox tig ,I get it those esab heliarc were super expensive back in the day
I'd like to see that, too. I see Lincoln AC machines for sale often, and it would be nice to turn one of those into a TIG machine.
Most headers are built using 304 or 409. I would agree that a 312 filler would be ideal to cover any instance that may come up when building headers for your car/truck
I do those joints every day, for being "rusty" it looks awfully good. Some of mine don't turn out that nice haha. Any chance that you've dabbled with the new flux cored tig filler for stainless? I have yet to use it (i've been on the commercial end of work for 5 years and haven't done industrial in awhile) Apparently you can use the flux core on large bore with no purge and it turns out a sugarless root. I think it would make a great video. You are really good with pointers.
Love what you are doing with your videos
Another great video, as usual. Thanks Jody!
With an old scratch star stick welder, an home made switch. I'm astonished. That's the tool you need for perfect welding: a Jodie.
Thanks for the tip lot of help
i didnt make the rectifier so i dont have any plans or schematics. I traded for it several years ago. its a long story.
there is a youtuber that might send me his plans for one he made. if he does, i will post it
Would love to find one of those flexible lighted inspection mirrors, any idea where to get one?
Thanks so much Jody for your videos!
I have bought DVDs and TIG fingers and gas lenses and been completely happy with all of it.
thanks for sharing your passion.
masking tape can be detramental to some welds due to the chlorine in the glue, make sure you know what the end use of the product is. There is chlorine free tape. Aluminum foil works great, just ball some up around purge hose then just shove it in tight.
Split screen is really neat!
I love my TIG Finger. I wish you made a glove out of the stuff you make the TIG Finger out of.
Excelente video!! una pregunta, dónde puedo conseguir el dedal térmico en Argentina?
love the side by side video!
Thanks! I job right of Hobart institute. This video helped me
Great teacher you are, Jody! I'm curious about the rectifier and diodes you used to convert the buzz box to tig. I looked but couldn't find the specific video of your many detailing the construction of the converter. Is there a schematic or instruction video somewhere that shows the construction?
Thanks,
John
I am from Slovenia and I just love your videos keep them coming. what is your opinion on Balder's welding helmet you have it hanging on the wall ?
This is great, very informative and concise, i am in the learning process and about to purchase a multi process welder, whats that dual gauge valve called for routing dual setup to do tig purging and back purging?
Google RMA-10-VSS and just tee two of those to your flow meter after the regulator
Another great video:-) I have an old lincoln ac 225 tombstone could I weld aluminium with it or just stick with the ta 186.
Thanks for the quick reply! Last question. .. is there a general rule of thumb when fusing with no filler that you need to bevel?
I don't have a chance to practice, but I could figure it out in 5 mins now but a job is conning up in Nov I need to conqueror this asap lol
have you thought of using the temporary rubber freeze plugs with a hole drilled into it for your argon just a thought Iv'e never used argon so i don't know if it would help but it could save time getting set up and they don't cost much at an auto parts store
when you have to close an opening near the weld, you can replace tape (that would melt and burn) with aluminium foil.
If I was building a black and grey tank for an rv out of 304 stainless would it be better to use filler or not?
thanks
I am sure this is a dumb question, but I am new and have 16ga 403 tube to weld myself. Why didn't you use any filler rod for this? Was it just do to the application the tube was going to be used for, or is it just not needed with this thin wall tubing?
i think the rule would be that if it needs a bevel, it probably needs filler.
Great video! One question though. I've always seen stainless welds have all sorts of color in them from purple or blue to that wheat/straw color. Is there a correlation between color and weld strength/quality when welding stainless? Is that regular silver color from this video what you're looking for?
Did you have to bevel the stainless If you are fusing with no filler?
What size cup or gas lens were you using here. Did not see any black sooting at all ??
I know that this may be a very stupid question but could you share what would be the price for one of those wireless miller foot pedals? Thanks in advance.
nice video. how thick is the metal? wouldn't high speed pulse be helpful with this?
Jody, how would you best describe the characteristics of initially achieving full penetration? The vid is great I've only tried this a couple of times but my puddle would bubble before I could get it wide enough to start walking. Thanks!
Hi Jody
This is Keith StClair at Delta. I found your web site looking for Mig tips i hadn't Mig welded in a long time. How have you been? Are you welding somewhere? Its nice to see ya again.
Jody,do know about welding mig or flux-core on carbon steel pipe in the field? For example,do you have to use self shielding flux-core because of windy conditions, and dose FCAW-S weld open root, or do you need to go to a backing ring type joint ? Thank You
do you have a video on how to make the buzz box work for Tig?
Hi Jody,
Always enjoy your videos. What would your suggest for fit up and parameters for 1 1/2 -3" schedule 10 316 stainless steel tube?
Ps More IC Welds.
Thanks
Tim
Hey Jody, what size tungsten are you using? Great weld as always brother. TC
square cut with no bevel 1/16" wall (1.6mm)
weldingtipsandtricks sch 10?
yes he does they are great
I'm sure you've mentioned it in other videos, but if you were going to use a filler metal for something like a exhaust header or cold air intake what rod do you recommend?
tig finger is worth its weight in gold, i use one everytime i weld.
Hey Jody, I notice your using the Lincoln Viking 3350 helmet. Do you mind doing a review and compare to the digital elite. Thanks!
Do you have a weld lip on the pipe to act as filler wire or does it not matter that there might be undercut or low weld ?
Im a plumber and so far i have only welded with a oxy acetelyne setup, how do gas welding compare to tig welding?which one is easier?
You can get that flashlight on amazon (search for EMF-2 Extendable Magnetic Flashlight)
~ $25.
Thanks for the video!
how long you need to purge to get the tubing filled with argon? or how long I need to wait to start welding after purging?
Where did you get those purge plugs?
Nice class
nice video!
any videos on the root?
Is there any way to make a rig like that aluminum capable?
great vid...again
Jody, do you ship the Tig Fingers to Australia?
good viedo .qualified welder plates .pipes. no work for any trades man in south africa .9million uneployed. 53 million popl
kevin travis hard getting a welding job in a place where people still live in mud huts and burn elephant shit for fuel.
South africa has mines .
I don't have the capability at the moment to produce videos but for the time being in can talk about stainless process piping. Today I had to bust out my mirror and mini tig torch to complete a field weld on a product line.
+Mack Avila I love mirror welding. Its challenging and fun. I am a structural welder for now though. I hope to get my pipe qualifications soon though. If you made videos or a little blog/forum with pictures I would like to take a look at it. Do you do any other welding other than sanitary piping?
what many amps would you use on 16 ga 304l?
hello please make a vido of stainless pipe wit filler rod I wan2 see yu wak the cup or do u freehan root???
Hey Jodi, do you mail the Tig-Fingers worldwide?
the video is called "Scratch Start Tig Welding with a Twist"
weldingtipsandtricks is it possible to put a root in schedule 40 304 stainless pipe in the 6g position without backfeeding?
Thank you!!
Jody gives the detail the others find "way too much trouble."
I CANT SEEM TO GET A CLEAN SHINY WELD I KNOW IM DOING SOMETHING WRONG BUT CANT FIGURE OUT WHAT!WELD TURNS OUT GOOD BUT ITS ALWAYS REALLY DARK PLEAASE SHARE OR INFORM WHAT I AM DOING WRONG THANKS
Tim Harris Your too hot turn down your amperage
Up your argon cfm and get a gas lens setup
Air getting to the weld while it's still very hot..
thank you!
Good to see u
Picture in picture rules! Thanks!
Hi Jody
hey Jodi you hands down tug weld better than Mr. Tig from the weld channel lol his welds kinda such lol
*tig
New guy on there, Bob Moffet is better......
I don't know about all that but I do learn alot from all three, Jodi, Bob and Mr. Tig.
M. Noel hate mr tig
James Mclaughlin why his welds are solid and his knowledge is terrific.
How may amps
3 Dislikes come on who wouldn't like this jodys videos are like websters dictionary for welding.