Dyson DC65 Stand Up Repair
Вставка
- Опубліковано 4 вер 2024
- This video shows how to fix a Dyson DC65 vacuum cleaner that will not stay standing up. The part to be replaced is a "Dyson Upright Lock DC41" with part number DY-920705-01. Since the part number includes DC41 in its name, I assume this procedure will also fix DC41's.
This video also includes replacing the "Dyson Strut Service Assembly" (DY-924157-01) since it was inadvertently damaged while exploring the problem.
I cannot thank you enough for this. My wife had this on my to-do list ever since I disassembled our Dyson and replaced several other parts - with the main issue being the motor in the vacuum’s head. Through all of that work, I screwed up this exact step and our vacuum would no longer stand independently. You just saved me from receiving countless more passive aggressive comments, more exclamation points on my “honey-do list”, (all that added an indescribable amount of anxiety and stress for myself) and quite possibly saved my overall marriage. Thank you, thank you from the bottom of my heart. You are a godsend.
After MUCH searching this was the ONLY video I have found that duplicates my EXACT problem, once I followed steps in video, sure enough the upright lock was broken in two!!! THANKS!!!!!
I am greatly appreciative of you and your time taking this video. I had this problem for a while now, and yesterday, I was able to fix it using your video. The Upright Lock part was hard to find, but I eventually found one. Again Thank you for the video.
Very informative and helpful. Thank you !
Great video. Fixed our Dyson in 10 minutes.
Thank you sir, just what I needed!
Mine was stuck in up but this helped me access the mechanism and release it. Thank you for posting this!
Thanks for video, and the part number.
OK - so I took my dyson to pieces and inspected the parts. Luckily I had the star screwdriver - its not a cross point. Anyhow when I got the cover off my DC70 was different design and it was obvious at 5.57 that the bit he put in wasn't broken in my machine. However the locking mechanism obviously was not working. Having inspected the grab mechanism it was clear to me that something has to force the left side of the flange upwards to engage the spring and hold the back wheels in place. looking at the cover plate which is different in the DC70 which closes up the gap as the wheels go forward to the upright position it occurred to me I needed something to force the retaining flange up. I drilled a hole where there is an obvious contact point on that cover plate and inserted a short bolt . When I upright the handle this now engages the spring mechanism and holds everything in place.
Thank you so much for this excellent video!
excellent!👍
Thanks for your video. v informative. I have this DC17 MACHINE. Have a problem with it. the vertical part is stuck with the horizontal part at 90 degree and vertical part would not recline. I have to use lot of force to do that and it would make a loud sound when doing it. I feel something might break while putting force on the horizontal part to get rid of the stuck part. do you know what might be wrong with this stuck problem here. thanks. is there a way i can contact you over the phone. thanks.
شكرا انت رائع
I changed the internal hose on a 65. Since then, the hose has no suction. It’s not clogged, I’ve checked it thoroughly. What else could it be? Is there a switch that would not allow it to switchover?
Mine is the same - but that part is no longer available - SOB SOB.😡
Good vac, so why don't they just fix it right at the factory?
it's dyson for ya