On MY 96 k1500 my battery gauge does the same thing as your's doe's the needle rock's back and fourth when the blinker is on. i thought it was some weird thing with my truck but maybe it doe's it on all gm truck's from the 90's.
There's two where the whole socket and bulb has to be replaced. I believe it's the daytime running light indicator and the seat belt indicator which both are 194 bulbs. You can break the bulb from the socket itself and reuse the socket with a new bulb if you're creative.
I changed mine to blue led however when I turn my cluster on and I use my turn signal lights I get hyper flash it’s kinda annoying any body know a fix do I need a resistor or something? Thanks
We are trying to do this in my buddies 97 gmc, we cant get one side to light up properly with the leds I got off Ebay even after twisting them around, any ideas?
Depends what the problem mine had the factory bulbs so I had to replace the little plastic bulb housing, alsa make sure you barely turn it so the the copper is connected. It’s simple hope you fixed it.
My friend call you tell how many Red Bulbs I saw the orange color like for check engine the green ones are for turn signal and Illumination what kind of bulbs I got to buy and how each color?
Are you still happy with these or have any of them burned out on you? Where the sizes of the bulbs for the different parts of the dash and where can I get them? Thanks
The green ones work great. No burnouts and no flicker. The smaller white LED bulbs I used were more of the issue so I would stick to normal bulbs for those. I got all of my lights on Amazon.
Gary Schenck I’m sure if you look on amazon for the 94 series white bulbs any will work. I would recommend using a normal halogen bulb for the check engine light honestly
@@BenCoryat that's what I need the exact name or so. I been looking it up and check engine light for 96 is what I been trying so far. So it's 94 what ?
Hey I know you said the names of the leds you used in the video but on Amazon there's hundreds of results, could you type up the names of the leds you used and the led flasher relay?
amzn.to/2p0C4mM That was the Green LEDs, amzn.to/2X27HJn And these were the indicator lights. I did not need an LED flasher they worked great without one.
Just don't buy the cheapest ones on amazon. Look for the ones with 100 or so plus reviews and a 4+ star rating and that will usually be your safest bet. Its worth it to pay the extra $10 for a set of quality LED's that wont burn out or flicker all the time. Been down that road before
![Lp. Сердце Вселенной #1 НАЧАЛО ПУТЕШЕСТВИЯ [Новый сезон] • Майнкрафт](http://i.ytimg.com/vi/380Q7gLWGvk/mqdefault.jpg)
Thanks for speeding through the most important part. No instructions if you twist the lights out or just pull.. Awesome
Didnt realise it was his job to tell you that
I like how your battery gauge was blinking with your blinker
Can you make a video of how to change the light switch leds mentioned at the end of the video
Great job! Could you please provide links to the LED please? Thank you.
Nice. Gonna have to try this.
On MY 96 k1500 my battery gauge does the same thing as your's doe's the needle rock's back and fourth when the blinker is on.
i thought it was some weird thing with my truck but maybe it doe's it on all gm truck's from the 90's.
What are the big bulbs for and what size are the small ones?
Nice i just put some ice blue on my gmc sierra
Good video,thanks!
I got a 2001 GMC Sierra 1500, would like to go blue, if you got pointers..thank you and God bless you.
I have heard that some of the sockets you need to replace the whole thing, not just pull out the bulb. Is that true?
Ryan Christensen nope, I used the led bulbs in the video and that’s it, no socket replacing
There's two where the whole socket and bulb has to be replaced. I believe it's the daytime running light indicator and the seat belt indicator which both are 194 bulbs. You can break the bulb from the socket itself and reuse the socket with a new bulb if you're creative.
Can you post a link for the bulbs. Are the ones for the light switch the same bulbs as the cluster?
Is there a bulb for the (PRND321) ? Mine is starting to go out it glitches while I drive
Are they dimmable bulbs? Because you can dim them with the headlight switch
I changed mine to blue led however when I turn my cluster on and I use my turn signal lights I get hyper flash it’s kinda annoying any body know a fix do I need a resistor or something? Thanks
Nice video. Would this bulbs fit the HVAC control switch
Really important: are they dimmable on your dash like normal incandescent bulbs are?
Federico Arango yes, they don’t go as dim but they do go dim and bright
That was my question also
@@bamabassgrabber mine too
We are trying to do this in my buddies 97 gmc, we cant get one side to light up properly with the leds I got off Ebay even after twisting them around, any ideas?
If one side lights up I would swap over the ones you know that work to see if its an LED issue or the gauge cluster issue.
I wanna see how you did the sign one
How many 194 LED bulbs do I need to replace the current halogen bulbs? Thanks
8
Good job do they make led lights for blinker, brake service
Yes, but you have to switch to a LED flasher relay so the lights wont blink really fast
Half of my speedometer doesnt light up why is that? I spinned it 180 degree and nothing please respond bak🙏
Can somebody help I replaced all my bulbs and they are not coming on did I put them in the wrong way ?
Depends what the problem mine had the factory bulbs so I had to replace the little plastic bulb housing, alsa make sure you barely turn it so the the copper is connected. It’s simple hope you fixed it.
My friend call you tell how many Red Bulbs I saw the orange color like for check engine the green ones are for turn signal and Illumination what kind of bulbs I got to buy and how each color?
All the bulbs are white that are in the instrument cluster.
Would this bulbs fit the HVAC control panel?
Is this the same for some of the other lights on the interior
Daniel K yes, just have to find the bulb type and search for the LED type
Why wouldnt u show how to take the dash apart ? Only reason i clicked on the video.
How do you convert the light switch over and what bulb size are the lights in the switch?
Andre Johnson check out my latest video that covers it.
Did you have to disconnect the battery?? I need an answer ASAP thanks
Brett Shaw not needed but it wouldn’t hurt
Are you still happy with these or have any of them burned out on you? Where the sizes of the bulbs for the different parts of the dash and where can I get them? Thanks
The green ones work great. No burnouts and no flicker. The smaller white LED bulbs I used were more of the issue so I would stick to normal bulbs for those. I got all of my lights on Amazon.
Post link
Hey give me the link to these check engine light bulb? 74??? I need the exact link to buy them asap
Gary Schenck I’m sure if you look on amazon for the 94 series white bulbs any will work. I would recommend using a normal halogen bulb for the check engine light honestly
@@BenCoryat that's what I need the exact name or so. I been looking it up and check engine light for 96 is what I been trying so far. So it's 94 what ?
@@BenCoryat and I have eBay. My Amazon accnt wouldnt pull up for some reason
Didn't even show how to take the old bulbs out of the plastic connector
Hey I know you said the names of the leds you used in the video but on Amazon there's hundreds of results, could you type up the names of the leds you used and the led flasher relay?
amzn.to/2p0C4mM That was the Green LEDs, amzn.to/2X27HJn And these were the indicator lights. I did not need an LED flasher they worked great without one.
Coryat Media wait til they start burning out they will fuck your world up you should used a led relay.
Joe G. What happens when they burn out
@@owenfisher8279 Mine have not burnt out but if they did you would just replace them
Just don't buy the cheapest ones on amazon. Look for the ones with 100 or so plus reviews and a 4+ star rating and that will usually be your safest bet. Its worth it to pay the extra $10 for a set of quality LED's that wont burn out or flicker all the time. Been down that road before
Speak loudly and less volume on must can barely hear then mui is screaming
How do you convert the side piece for headlights?
The side piece uses the same LED bulb as the colored ones, but you have to enlarge the plastic piece. If you want I can make a video of it.
@@BenCoryat pls do
Coryat Media yes pls do so since I’m trying to look for a tutorial
Ok, working on a video showing how to get it done
Coryat Media any updates on that?!
These dimmable?
They are to a point, they have a working voltage range and when they go below that they turn off before the switch turns it off.
@@BenCoryat that's not horrible, what brand and where you find them?