ZepLabs: 4 Jaw Lathe Chuck (DIY)
Вставка
- Опубліковано 21 вер 2024
- A chuck is not a necessity, but a luxury, old woodturners would say. Forget that! Let's make one...
If you like what you see feel free to subscribe.More coming up!
And if you have the luxury and the need to spend the extra buck for funding the vids you enjoy so much watching, here:
/ zeplabs
Thanks eitherways!
Το τραγούδι Texas Techno του καλλιτέχνη Audionautix έχει άδεια με βάση το εξής: Creative Commons Attribution (creativecommon...)
Καλλιτέχνης: audionautix.com/
That's a very good design. Thanks for sharing this idea and video.
Glad you like it!
You should use bolts with an allen wrench hole inside the rim to retain them, or you could move the welded nut to inside the rim and grind something you could hold with a wrench on the short end while the nut acts as a retainer. If it fails it's likely to throw a bolt at high speed right at you.
excellent job.
Good made bro am don't see this type Chuck anywhere it's really nice
Thanks Sahib!
thanks for inspiring!
...the audio trak is very nice ;-)
+Ausprobieren Dann Weisst du es Thanks a lot! Glad you liked it!
Excellently done!!!
Glad you like buddy! Thanks
Zeb GREAT JOB love the the lathe chuck.. Do you have prints to make one? Would love to get a set. I think that is one of the best on you tube.. 2 generation wood worker says can lean something every day. Richard
Well done.
+Rolingmetal appreciate it!
Great job dude
Thanks Bill!
Eres un genio tio!!! Me gusta!!
Muchas gracias Luis!
I'm sorry. How big is your brain? Brilliant! I am utterly amazed at what you accomplish sir.
+PacoWang many thanks! I really appreciate your feedback 🙏🏻
great chuck I will mack one Nick D
nick dispensa glad you like it! If possible go for something harder for the jaws...the hold there is a bit on the weak side..Nick Zep 😄
Man you're a wizard ;)
+Walter P 😂
great skill ive followed you from video 1 and just would like to repeat PacoWang'S question "How big is your brain? Brilliant! THANKS for videos
john mellor thanks John for your precious feedback! And sorry for the late reply..
Brain is normally sized, it’s just that its full with with screws, nuts, bolts and a whole bunch of sawdust I suppose 😄
Thanks again!
so cool saves a lot of money! also do yo have dimensions so I could make my own?
sL velocity many thanks! Appreciate it. Sorry I don't have any plans. But you ' ll have no trouble figuring them out!
Not bad. I think I may copy your design.
Sure! Use something harder than plywood for the jaws though....I' m not totaly satisfied with the hold...
What s the name of metallic part u insert in 4 jaws... to make it advance or retreat caused by a rotation?
that thing at 02:13 ? Its called a T Nut.
The mechanism to make the jaws move is just a threaded rod with a nut that works like a vise.
ε ναι ρε μαστορα. και πολυ το αργησες!
Sakis DIY projects εμαθα οτι εκανες παραπονα και το επεσπευσα λιγο!
Can you tell me from where you have the electromotor?
+Ausprobieren Dann Weisst du es What motor??!
Sorry wrong video, I meant the engine for the mini Lathe
You got me there! It's a DC motor from an old hand drill..
Ah great, I have an AC motor from a blender.
Also has some strength.
Is he smoking a joint at 2.38
😂 Nope! I was just rolling my own cigarettes back then..
Sadly.... Wood Lathes seem DENEGRATED. MARGINALIZED. VICTIMIZED.
ANCIENT.SLOW.BORING.SHUNNED.
A child of 10 could learn this stuff.
Cereal box paper.... white glued onto a faceplate....
To make 10" diameter 8" deep Mahogany Nutbowl in my first HighSchool WW project.
😁 yep I guess they do... But its not trully the case! Personaly, its my #1 psychotherapy option!