Thanks for the tutor, i also noticed in the previous elevator build that not only you fall through the floor, but the pistons sometimes stay in place during travel. A Greatly improved version
PSA @2:49 The observer facing a specific direction does not matter as long as the arrow is going up down right or left as shown in the video then it will work. THIS DOES WORK ON REALMS (Somebody said it didn’t). THE ELEVATOR CAN GO AS HIGH AS YOU WANT, WENT MAX HEIGHT FOR ME Just did it on 8/29/24. 👍
This thing is amazing. I've been making this lab build with my little brother, and wanted to use an elevator. He said I should just use ladders or a water elevator, but that was too boring for me. (We were creative) I've scrolled for countless hours for something that works in console, because all of them were for java edition. After all of this, I FINALLY found a video that took me through the steps on how to make one. Thank you Tomco. (Don't get intimidated by how complicated it looks. It takes time but its worth it.)
Yooo as someone new to Minecraft and in his 40's lol you got the best tutorials hands down bro.. super easy to follow, great direction and yours Always work for me, just wanted to give you your props
My bottom button does not work, any reason why that might be happening? It does work though if I break or place a dropper on the observer on the bottom and the top button works fine.
Try putting it 1 block down, and the mechanism for it to activate but it 1 block down too, it happened to me but i could fix it, sorry im late to answer u
Notes to consider: When you activate the observer, whether it be a block or something, don’t be too quick to break it. The observer will not have enough time to activate the pistons. Make sure there is nothing sticking to the slime or honey blocks (obsidian or any immovable block is ok). Any blocks that stick to the slime or honey blocks can and will mess up your flying machine.
Man, you dont know how you made my survival easier, it is crazy! It works so good! Only thing im sad it didn't have its a call button, since i got stuck in my base and the elevator was in surface, had to break the flush door u made not so recently, but its awesomee!
Relating to an old question, Sorry to bug, Not that great with redstone but where but for the call function Where should I put the observer line at without having to extend out so much? I originally put it in between both top and bottom terracotta that is behind the repeater but that didn’t work
I tried building this so many times but it just breaks down it can go up but when i try to make it go down the machine seperates im on bedrock how to i fit this ?
How do you call the elevator if its down and your up and the other way around (just incase someone pressed the button without getting into the elevator)
I didn’t show it in this video cause it’s not exactly ‘simple’ you could either watch my other realistic elevator video, or just link up a redstone line from the bottom to the top, then top to bottom etc
can u give a tutorial on a 7x7 spiral door my friend give me a challenge i hav to win pls i am noob in redstone if i can't they will laugh at me pls bro 😨
Hi, I am wondering if there is a way for this to be called back down, or do you have to go back up to where the elevator is at. If so you should make a video on it, and or if you don’t
I don’t show how to add a call function, but all you would have to do is link the bottom and top button together, the easiest way to do that imo would just use an observer line 👍
either patched or doesnt work in the newest version of minecraft. the honey block doesnt move and will mess the elevator up. tryed it 10 + times made sure i made it right every single time. i basically know how to do it in my head now from doing it so much. Doesnt work in newest bedrock update dont waste your time.
It definitely still works, I used it a couple hours ago. If you have discord I’m happy to look at the redstone to see what’s up but if the honey block isn’t moving at all I’d check it’s not stuck to anything it should have and the piston below it and the redstone block is definitely in the correct place
I accidentally pressed the bottom button twice when trying to go up and the machine got stuck after moving up 1 block on the left block and 2 blocks up on the right one. Any suggestions on diagnosing how to fix that?
It is wayyyy to big for a tutorial sorry, the redstone’s area takes up like 600 blocks and then that’s not even including it’s height like it’s just huge lmao
I cant seem to get this to work. A few blocks move and everything just stops, but it gets no lift. Its like the upper half isnt responding to the lower half. Gone through an double checked everything, and its all correct. On ps4
@@TomcoTwo ps4. I ended up getting it all working, but then i messed it up by trying to add to it and make a double button (lets say it was at the top and im at the bottom, i wanted a button that would send it back down), but doing that, broke the elevator, so i have to tear it down and re-do it (i am terrible with redstone as i dont play often)
@@Your-Eva-01 i mean i can send you a world file on discord or something if you want, but im not gonna make a tutorial. the lift design belongs to tomco and i have no right to modify it and make a tutorial about it
Do you have a tutorial for doors that close on whatever floor the elevator is not on, and open when the elevator is on that floor? I was wondering because I was going to add it to this elevator
The easiest way is to just connect a button from the bottom to the top button, and then a button at the top to the bottom button so you can call it that way
I think you could add a redstone block to the side of the slime, and then when its at the top have the block power the doors open, and then when its at the bottom have it power open then, i wont make a tutorial tho since it takes the 'simple' out of its name tho
@jamiewilliamson9829 it depends what you’re looking for, the new one will have a call function, but will be less realistic. The current one doesn’t have a call function but is realistic
@@TomcoTwo I'm liking the sound of the one with the call function, but realistic also sounds nice. Guess I'll be checking out both. Thank you for replying back to me.
So i have the exact same set up as he does. It works going up but the pistons dont activated going down when i push the button. Not sure what im doing worng.. Edited- now it doesnt work up or down. The button doesnt activate the piston
@@jons1nn could you not just build this, and then keep the elevator at the top and then only go down when you need to? the elevator doesnt automatically start at the bottom
0:19 "what do people intend to do up here? Skydive? "
Thanks for the tutor, i also noticed in the previous elevator build that not only you fall through the floor, but the pistons sometimes stay in place during travel. A Greatly improved version
Thanks :)
I keep falling through on the way up,but not on the way down.
@huntersmith5276 you shouldn’t be, did you modify the elevator at all?
PSA @2:49 The observer facing a specific direction does not matter as long as the arrow is going up down right or left as shown in the video then it will work.
THIS DOES WORK ON REALMS (Somebody said it didn’t).
THE ELEVATOR CAN GO AS HIGH AS YOU WANT, WENT MAX HEIGHT FOR ME
Just did it on 8/29/24. 👍
Thank you !
This thing is amazing. I've been making this lab build with my little brother, and wanted to use an elevator. He said I should just use ladders or a water elevator, but that was too boring for me. (We were creative) I've scrolled for countless hours for something that works in console, because all of them were for java edition. After all of this, I FINALLY found a video that took me through the steps on how to make one. Thank you Tomco.
(Don't get intimidated by how complicated it looks. It takes time but its worth it.)
Np, glad you like it :)
Yooo as someone new to Minecraft and in his 40's lol you got the best tutorials hands down bro.. super easy to follow, great direction and yours Always work for me, just wanted to give you your props
thanks so much :)
Whoa after looking all day for an working elevator yours was great,thanks man,i just edited a bit and put some fancy doors lol won a subscriber
Thanks bro :)
this is awesome! I literally couldn't find any working flying machine, let alone an elevator! thanks!
Np :)
I'm from Indonesia, bro, you're amazing at being able to create readstones like this, cheers up

Orang indo iki
Lift nya gak bisa cokkk
I used this elevator in my stronghold base, works amazing
My bottom button does not work, any reason why that might be happening? It does work though if I break or place a dropper on the observer on the bottom and the top button works fine.
Try putting it 1 block down, and the mechanism for it to activate but it 1 block down too, it happened to me but i could fix it, sorry im late to answer u
Notes to consider:
When you activate the observer, whether it be a block or something, don’t be too quick to break it. The observer will not have enough time to activate the pistons.
Make sure there is nothing sticking to the slime or honey blocks (obsidian or any immovable block is ok). Any blocks that stick to the slime or honey blocks can and will mess up your flying machine.
2:46 I put the observer and it kept facing the wrong way
Same
Love the vids keep it up
ty :)
When I activated it it flew away because I put the obsidian the wrong way
Man that is hilarious, im just imagining a real life elevator going up and just flying out of the building
charlie and the chocolate factory 🏭 🍫 😂
@@AcuraFan236 exactly lol
Great Video! Your redstone tutorials are the only ones on bedrock that I can follow. Your videos work every time!
Thanks! :)
Thanks, your tutorial vids are really good 👍
ABSOLUTELY GENIUS THANK YOU SO MUCH
np
Awesome video! thanks for sharing
a couple days ago i did your other 2x2x1 elavator which is pretty convenient lol
So helpful thanks for the elevator!
Np :)
Man, you dont know how you made my survival easier, it is crazy! It works so good! Only thing im sad it didn't have its a call button, since i got stuck in my base and the elevator was in surface, had to break the flush door u made not so recently, but its awesomee!
Thanks :)
@TomcoTwo np!
@@TomcoTwo I FIGURED OUT A WAY TO CALL THE ELEVATOR YIPPEEE
Relating to an old question, Sorry to bug,
Not that great with redstone but where but for the call function
Where should I put the observer line at without having to extend out so much? I originally put it in between both top and bottom terracotta that is behind the repeater but that didn’t work
Thank you Thats very simple and Easy this elevator is cool 🤙
Do you have one that i can activate on either floor? Like if im upstairs and its down
Is there a way to make the elevator continuous? As in it goes up reaches the top then goes back down again and then again.
OMG!!! Out of all the elevator tutorials that i have looked up this is the only one that actually WORKS!!!! THANK YOU SO VERY MUCH!!!😁😁
Np :)
When I place the piston by the Redstone 2:08 the piston activates pls help
You are most likely on Java and not bedrock, this design will not work on JAVA
Are you on Java?
Thank you! This is a great tutorial and elevator
Thanks :)
do you need to make another for each floor? or can you set up a contraption to get it to stop at the one you want
This cannot be made multi floored, but i do have a few multi floor elevators on my channel
I tried building this so many times but it just breaks down it can go up but when i try to make it go down the machine seperates im on bedrock how to i fit this ?
Wdym by separates
@@TomcoTwo The pistons and the slime blocks on the bottom half go down by one block but the top half doesn't stick and stays in place
@@TomcoTwo so when I tried to make the observer that is on the piston to face right, it keeps facing forward NOT right
thank you!! very easy to follow.
Np :)
When I make it go down it goes down a few blocks then start going up again, I don’t know why it worked going up but not down, do you know why?
Try not having any wall/blocks near a observer.
How would I go about making the elevator interior 3 blocks wide?
How do you call the elevator if its down and your up and the other way around (just incase someone pressed the button without getting into the elevator)
I didn’t show it in this video cause it’s not exactly ‘simple’ you could either watch my other realistic elevator video, or just link up a redstone line from the bottom to the top, then top to bottom etc
@@TomcoTwo ok im not much of an expert when it comes to redstone but i can try 👍🏼
Worked on my realm. Thanks.
Your welcome :)
In the video that piston triggering the observer that triggers the slime piston on the bottom, why a piston and not an dropper?
Piston has a slightly different timing than droppers
5:00 not working with dropper pls help
Can you swap the slime for honey and the honey for slime as long as you did both, also, Great videos
Yea u can 👍
Glad youtube showed me this after i made the old design and fell through the floor
Do you know how to send it up from top floor and down from bottom floor
Easiest way it just to have a observer line going from down to bottom and bottom to top and connect them to the appropriate buttons
@@TomcoTwoi just used dust and repeaters and also added note blocks when you press the button
Awesome
can u give a tutorial on a 7x7 spiral door my friend give me a challenge i hav to win pls i am noob in redstone if i can't they will laugh at me pls bro 😨
7x7 spiral doors don’t exist 😭
but one person made it but there is no tutorial his channel name- LDRM
@@Putla-n7p theyve made a 6x6 spiral ish door but i cant find a 7x7
sry my mistake it was 6x6
I want a 6x6 spiral door
Best mincraft tutorial guy👍
Ty :)
Agreed
Hi, I am wondering if there is a way for this to be called back down, or do you have to go back up to where the elevator is at. If so you should make a video on it, and or if you don’t
I don’t show how to add a call function, but all you would have to do is link the bottom and top button together, the easiest way to do that imo would just use an observer line 👍
@@TomcoTwo Thank You 🙏
This one is amazing for my building in my super flat with my friends took me hours to find one that works
Glad you like it :)
Yes you saved me from the suffering of redstone elevators👍
Is there any way of making in multiple floor where it stops?
either patched or doesnt work in the newest version of minecraft. the honey block doesnt move and will mess the elevator up. tryed it 10 + times made sure i made it right every single time. i basically know how to do it in my head now from doing it so much. Doesnt work in newest bedrock update dont waste your time.
It definitely still works, I used it a couple hours ago. If you have discord I’m happy to look at the redstone to see what’s up but if the honey block isn’t moving at all I’d check it’s not stuck to anything it should have and the piston below it and the redstone block is definitely in the correct place
@@TomcoTwoyeah it still works i just built it
I love this tutorial so much! Can you make it multi floor per chance? That would be awesome!
Not this design, but I do have a few other multi floor designs 👍
thanks for this tutorial this was a good build!
Np! :)
I accidentally pressed the bottom button twice when trying to go up and the machine got stuck after moving up 1 block on the left block and 2 blocks up on the right one. Any suggestions on diagnosing how to fix that?
And does this happen when you don’t press the button twice?
Can you do a tutorial on the smooth one?
It is wayyyy to big for a tutorial sorry, the redstone’s area takes up like 600 blocks and then that’s not even including it’s height like it’s just huge lmao
Nice Elevator 2x2x1 and i love your vids
I replaced the old elevator floor and celing with slabs and it worked fine
is this for the mobile version?Sorry, I'm not good at b1droke and java
ye it is
I cant seem to get this to work. A few blocks move and everything just stops, but it gets no lift. Its like the upper half isnt responding to the lower half. Gone through an double checked everything, and its all correct. On ps4
Ok, update. I got it to go all the way up. However, now, i cant get it to go back down...
Are you on ps4 edition or bedrock
@@TomcoTwo ps4. I ended up getting it all working, but then i messed it up by trying to add to it and make a double button (lets say it was at the top and im at the bottom, i wanted a button that would send it back down), but doing that, broke the elevator, so i have to tear it down and re-do it (i am terrible with redstone as i dont play often)
@unhollowed_7383 fair enough
ty brother
Thanks gringo now I can use this elevator in my excavation mine 100 blocks down, me and my friend.👍
Awesome
@@TomcoTwohey, I found a way to add a call function to this design. Would you perhaps make an updated tutorial on that?
I chose not to do a call function since it’s mean to be as simple as possible, adding a call functions adds quite a bit of wiring
@@SmitePlayz1PLS MAKE A TUTORIAL PLS PLS PLS I NEED IT 🙏
@@Your-Eva-01 i mean i can send you a world file on discord or something if you want, but im not gonna make a tutorial. the lift design belongs to tomco and i have no right to modify it and make a tutorial about it
if you build one next to it you can make a 2x2x3 cabin :D
It would be nice to include material list since im making an elevator in survival and dont want to grind extra
i do show all the materials you need in the video
@@TomcoTwoSorry I'm blind
so i am building this and its in my house but when i go and place a block to get it to go down it never does any help????
I would check that all the observers are facing the right way but also that it’s not touching Anyhting it’s not supposed to
Thanks helped a lot
Np :)
Thank you so much I try to make lift for my son and other version not work. but this one work on bedrock
Your welcome :)
Do you have a tutorial for an elevator with multiple floors on bedrock? I would be really helpful if you do
I do
Nice!
Hiiiii! 😊
@@itskingmanmr595 hi!
I plan on building this, but my mine is like 100
Blocks deep. Would this still work?
As long as there’s enough space yea
Some elevator is just 1x2x3 size, but you need a multiple floors
I tried to update the observer and do what you said but no matter what it won’t update. It worked yesterday so what is happening?
Is it placed correctly?
I believe so
I will check
@@RebeccaBoisvert-c8c depends if its in its way, maybe try removing the other redstone temporarily
One piston was pointed the wrong way 😂
Thanks you so much now i have a elevator in the house ❤❤❤❤❤😊
Np :)
Does it work on java ?
Probably not sorry
@@TomcoTwo can you make java elevators
how would u make it 3x3
you cant make this 3x3 sorry
I’m building it right now and the observer don’t wanna face the right side 2:49
It didn’t work for some reason. They went up one block and stopped and when o place the block again it went back down one block. Plz help
Never mind I’m idiot I be using red terra-cotta because it looks similar To red stone because of my texture pack
😂
thanks!
Do you think it could be used with just honey?
No sorry
Do you have a tutorial for doors that close on whatever floor the elevator is not on, and open when the elevator is on that floor? I was wondering because I was going to add it to this elevator
Not for this elevator, but I have an elevator called ‘the Realstic elevator’ that does have doors, but it’s not exactly simple
Is there a way to make a call function?
The easiest way is to just connect a button from the bottom to the top button, and then a button at the top to the bottom button so you can call it that way
You are my favorite mincraft redstone UA-camr. Love your videos. 🤩
Thanks! :)
Is it possible to add a door to the elevator that closes for the floor it's not on and opens on the correct floor or would it get in the way to much
I think you could add a redstone block to the side of the slime, and then when its at the top have the block power the doors open, and then when its at the bottom have it power open then, i wont make a tutorial tho since it takes the 'simple' out of its name tho
Can you use slime instead of honey?
You need to use both slime and honey sorry
I made it the other day but for some reason it broke and I had to remake it and now im having trouble with the button to make it go down
Is it possible to makes it multi floor with a button to call the elevator?
You can’t make this multifloor, but you can add a call function if you want to
2:47 why is the observer so hard to position
i cant get it to position 😭
When the torch tower in the video the piston was activated, but the redstone dust wasn’t activated
But I fixed it 🎉
Could you make a 2 by 2 seemless glass piston door tutorial? Ik its hard but it would be fire
can you make an elevator that works with both Java and Bedrock?
It’s possible, but it would make much more sense just building one which is meant for each version
Can I ask, you've shown how to do a lift between 2 different floors but what do you do if you want to have a lift going between more than two floors?
I have a video on a multifloor elevator already. And I’m about to release another one
@@TomcoTwo Right, I'll check that out. Unless you recommend waiting for your new video on it?
@jamiewilliamson9829 it depends what you’re looking for, the new one will have a call function, but will be less realistic. The current one doesn’t have a call function but is realistic
@@TomcoTwo I'm liking the sound of the one with the call function, but realistic also sounds nice. Guess I'll be checking out both. Thank you for replying back to me.
Is there a tutorial on what to do if i want more floors?
This tutorial isn’t multifloor, but I do have a few videos on multi floor elevators
lift only goes up by one block after triggering the observer then stops, how do I fix this?
try and see if all of the pistons are the correct type. ie. you didnt accidently put asticky piston where a normal one goes
I need some help it goes up one block and then stops moving what did I do wrong.
So i have the exact same set up as he does. It works going up but the pistons dont activated going down when i push the button. Not sure what im doing worng..
Edited- now it doesnt work up or down. The button doesnt activate the piston
When is the video of the new multi floor elevator with the call function coming out??
Probably 2 weeks
@@TomcoTwoty, cannot wait for it
Plz tell me does it work now in mcpe
Yea
For some reason when I get to placing the button and putting the dropping to send the elevator up it destroys the red stone can anyone please help
I watched mumbojumbo, there is a chain elevator, can it be made into bedrock?
It can be made, but I wouldn’t make it since personally id rather just a flying machine lel
Can you make it where it has a door too thank you
thanks!!!
Np :)
Multiple floors ?
My newest video is a multifloor elevator, this can’t be made multifloor tho
@@TomcoTwo try me.
is there any way for me to make this go down first ?
Wdym?
@@TomcoTwolike an elevator that moves down and THEN takes me up, im trying to make a lab and it makes more sense for the lab to be underground
@@jons1nn could you not just build this, and then keep the elevator at the top and then only go down when you need to? the elevator doesnt automatically start at the bottom
it works 👌
I have to try this one the last one would work a couple of times then break.
Hello, If I join your channel, will I get the world build download link?