Bossing.. yong Timing alignment tool na nabibili na for 2.2 engine ay pedeng bang gamitin sa 3.2? Looking at the photos, yong tool na para 2.2 ay looks the same sa 3.2. Your thoughts please. Salamat
Good day, yung cover po ba na black nung timing chain my gasket po ba yun na rubber? Or talaga liquid gasket lang inaapply dun. If ever my recommended na liquid gasket po kayo.
good day may ginagawa po akong 2019 model na ford renger pag inistart andar naman kaso mga 5 siconds namamatay ganon lng ng ganon pag iniestart ano pakya problima ser
I trimmed my cylinder head due to over heating, Now my pushrods on the intake area keeps breaking. Whenever i start to rev the engine. What could be the problem?
@@themechanictvchannel Sorry my friend not push rods but the rocker arm, keeps breaking only two on the intake cam shaft area. We started the engine but when I revved it the rocker arm on the intake side breaks. This is the second time the rocker arm broke on the same are. My mechanic checked the crankshaft saw that the crankshaft timing was not in line, hence he deduce that the inaccurate crankshaft timing may be the issue. What do you think?
More or less understand, good video. But more people n wider audience if you can speak English. English is one of the most spoken language around the world😅
pwede naman sir kaya kailangan kahit anu baklasin lalo na sa timing ehh gagawa ng sariling marking para sure lang ba at kung sakaling magalawa maibalik sa dati para walang iisipin sa bandang huli
i said u put mark in center at 3 dot and den when u assemble u put it back at the same place so that is ur original position marking..means u put in original place or position
Bossing.. yong Timing alignment tool na nabibili na for 2.2 engine ay pedeng bang gamitin sa 3.2?
Looking at the photos, yong tool na para 2.2 ay looks the same sa 3.2. Your thoughts please. Salamat
good job idol ito na yung inaantay ko sa ford
NICE WORK MATE. I CAN FIX MINE NOW,THANK YOU FOR THE VIDEO.
your welcome sir
Gratidão. Pelo. Vídeo.
Very informative information
Thanks
Goodjob sir! 😊
Salamat bossing sa information
Keep sharing
Boss 2014 ford ranger xlt timing chain po ba?
Yes, correct
Very good bru ❤
Thanks 🔥
Nice god job keep sharing sir....
Thank you, I will
good job stay safe always god bless
boss yung forf ranger wildtrak 2017 model. timing belt po ba o timing chain na?
Thanks for sharing sir..
Good job sir
Good job pare
Good coontent .....
boss mechanictanong ko lang boss sa Ford ranger wild trak saan na Lagay tcm 2014model
sa nilalim ng dash board sa gilid
Idol may idea kaba kung timing belt ba Yung Ford ranger 2015, or timing chan? Salamat sa idea idol
ilang cc ba yan sir
2,2 3.2 is chain 2,5 is belt and gear
@@themechanictvchannel salamat idol
Very informative video, but i have one question ....the three dots on the fuel pump have to align with the notch on the gear?
the tree nots that is marking position to main shaft timing and sprocket position
awesome
Salamat po sir,
your welcome sir
Shout out boss
Good job sir Godbless☺️
Bro please help.. I forget to marking at the 3 point to the pulley fuel pump... What should i do bro? Pls help
you positon at top 3 dot den put the sprocket
Good day po! Tanong lang po, kung mag hits na Ang crankshaft sensor naka top dead ba Ang piston no.1 sa Ford ranger po?
anung hits sir
@@themechanictvchannelnakatama naba Ang long slot sa flywheel sa crankshaft pag top dead Ang piston no 1 po
Good job sir!!
Good jod idol
thanks...keep watching
Same dn po ba ng fx4 2017 ranger to
same lang yan sir
Good day, yung cover po ba na black nung timing chain my gasket po ba yun na rubber? Or talaga liquid gasket lang inaapply dun. If ever my recommended na liquid gasket po kayo.
silicon gum lang un sir wala sya gasket
good day may ginagawa po akong 2019 model na ford renger pag inistart andar naman kaso mga 5 siconds namamatay ganon lng ng ganon pag iniestart ano pakya problima ser
👍👍👍
Sir ask ko sama kng ok lang ba OEM piston, rings n liner gamitin parts?
pede naman sir pero wag asahan ang quality
I trimmed my cylinder head due to over heating,
Now my pushrods on the intake area keeps breaking.
Whenever i start to rev the engine.
What could be the problem?
check ur valve clearance adjustment first
@@themechanictvchannel Sorry my friend not push rods but the rocker arm, keeps breaking only two on the intake cam shaft area.
We started the engine but when I revved it the rocker arm on the intake side breaks.
This is the second time the rocker arm broke on the same are.
My mechanic checked the crankshaft saw that the crankshaft timing was not in line, hence he deduce that the inaccurate crankshaft timing may be the issue.
What do you think?
Boss ford ranger fx4 2016 2.2 ay timing chain din po?
yes sir
Help me from 3:19-3:40 on crankshaft marks aslo how many tooth gap from cam mark to that small balt on crankshaft
if you find the timing to the crankshaft better use special tools sir
Ser panu Po kung bago na Yung high pressure pump ayaw parin umandar
kailangan check ung iba pang fuel system
Ilang taon na ford how many km?
Tropa paano vah pag check ng chain tensioner kung good pah oh hindi na?🙏🙏
ilang malage na ba unit sir
boss pwede ko b gamitin langis castrol 20w-40
kung mazda yan sir 10w 30 ok na yan masyadong makapal yan 20w 40
ford ranger 2 2 sir
Brape kos baiki tuan
kita mau baiki apa boss
More or less understand, good video. But more people n wider audience if you can speak English. English is one of the most spoken language around the world😅
yes sir true but my english spoken so very poor sorry
Tanun kulang bos magkanu overholl nang makina nang ford renger bos.
more or less 20k
hiw many kelomter replace timeng chain
for me 150 to 200 km due to reolace
Ask ko lang po bakit nagpapalit ng timming chain at every kelan po
una kung maingay na kaya naman nag papalit para ma maintain ung sasakyan pwede na mag palit 150 to 200km
Panu po kung nagalaw yung high pressure pump nya hindi natandaan yung timing mark??pweee po ba gayahin nalang tulad nyang pang timing mo boss??
pwede naman sir kaya kailangan kahit anu baklasin lalo na sa timing ehh gagawa ng sariling marking para sure lang ba at kung sakaling magalawa maibalik sa dati para walang iisipin sa bandang huli
Eh sir nabaklas napo namin di namin nalagyan ng timing mark panu po gagawin?
@@topereugenio1120 gayahin mo nlang kung pano ko ginawa
Katropa ilang tinakbo na nyan or ilang kmh?
mejo mataas na sir
Dapat ba naka top ang piston
no sir ung piston naka set sa BTDC
Hello boss magandang gabi po..kailan po ba palitan ang timing chain?
depende sir una if maingay na pangalawa kung nag kaka issue sa corelation
Copy sir..thanks
Gdpm sir magkano ba ang hi pressure ng 2.2 ranger ?ako aY d2 s negros
ung pump po ba sir prize po ba
Boss bakit pinalitan high pressure pump?
deffective na sir
Nagtino po iyan sir?
uu sir sa awa ni lord tumino naman
Sir panu po gagawin nabaklas po yung pressure pump nang di nalagyan ng timing mark san po itatapat? Kung sakali
sa sprocket my marking naman yan sir
6:03 - 6:10 can someone please translate what he said here?
i said u put mark in center at 3 dot and den when u assemble u put it back at the same place so that is ur original position marking..means u put in original place or position
@@themechanictvchannel 😅 Wow Thank you so much.
@@themechanictvchannel sorry to bother you again.Does that mean that the high pressure pump needs timing to operate?
@@HackersGames-ug4uj no but if you want put in original position much better. Write?
@@themechanictvchannel yes Absolutely.I have no high pressure fuel to injectors. Any idea of what problem I have please?
Good job pare
Good job pare
thank you pare...