Honda S2000 | Oxidation On Doug's S2K
Вставка
- Опубліковано 26 сер 2024
- The car was cleaned already but we went over it with SpeedShine anyway to remove and residual dirty. Clay Bar would be best but we didn't this time. Once clean, we started with a test panel with light pressure and compound. That pad was really dirty so we stop to go get a new pad to do the rest of the car. We used an orange pad to cut and a black pad to finish. After going over the whole car the results were great considering what we used.
Products Used:
Harbor Freight DA Polisher
Harbor Freight DA Foam Pads (orange and black)
Meguiars Ultimate Compound amzn.to/2d8VjOY
Griot's Garage One-Step Sealant amzn.to/2e1ZPVH
Griots Garage Speed Shine amzn.to/2d45XLL
Microfiber Towels
We are no experts so if you have any comments or suggests please share below, Thanks! Dont forget to like and subscribe!
Follow Me on:
IG @brandonehicks
TW @brandonehicks
You got to love listening to that machine for 5 minutes straight. Came out pretty good for a dirty pad. certainly deserves a thumbs up
The backing plate you have there is for sanding.
Not a bad little DA but to reduce vibration get to a backing plate for polishing.
You need to clay before using a DA, all of the contamination within the paint will get into your pad and do a few things, it will create an abrasive that you're scratching across your paint and it will tear up your pad. Also, as dirty as that pad is, you're not getting the best usage out of it. It is not going to work as it should, it will not cut or work for polishing. You don't need to buy new pads every time, just clean it.... often. Especially when cutting, you'll get clear coat into the pad, you'll get dirt/dust in there and obviously broken down product mixed with all of that. Use compressed air, if you don't have air use a brush, no brush.... use a tooth brush then but be sure to clean it. Youre just going to end up adding swirls (not the good kind from cutting) and holograms.
next time clayed the surface... tht makes ur polishing step faster and. ez!!!!!👍👊
his arm speed is on point though. thank god. now if only you kept the cord over your shoulder. 😁
that Red looks good , nice !
Why meg's ultimate compound vs. using griots boss correcting cream?
I have the same issue and the kit I just bought has the griots correcting cream included..
Nate Lu just because the kit you bought included griots doesn't mean he needs it too.... the ultimate compound is a very good quality abrasive cutting compound. While griots is excellent, it isn't always the best choice, Mcguires professional line of products work amazing and honestly, their UC works almost as well as the ultra cutting compound.
It came out great 👍🏽
nice video man. O had the same polisher but I returned because I figure that for 20 dollars more I cound get a poter cable polisher
Rigo Cornejo lol the porter cable isn't $20 more brand new, the HF is $50 when it's on sale, the PC is usually $100 brand new. In my opinion the HF has more torque than the PC, it corrects better in my opinion.i can do a lot of correction with my HF on a 5 inch backing plate and microfiber cutting pad, my next polisher will be a rupes 21 or G21, a porter cable isn't even an upgrade from the harbor freight.
Job well done! 😮🤭😍
Thanks!